Muscle protein waste in tumor-bearing rats is effectively antagonized by a beta 2-adrenergic agonist (clenbuterol). Role of the ATP-ubiquitin-dependent proteolytic pathway.

Tissue protein hypercatabolism (TPH) is a most important feature in cancer cachexia, particularly with regard to the skeletal muscle. The rat ascites hepatoma Yoshida AH-130 is a very suitable model system for studying the mechanisms involved in the processes that lead to tissue depletion, since it induces in the host a rapid and progressive muscle waste mainly due to TPH (Tessitore, L., G. Bonelli, and F. M. Baccino. 1987. Biochem. J. 241:153-159). Detectable plasma levels of tumor necrosis factor-alpha associated with marked perturbations in the hormonal homeostasis have been shown to concur in forcing metabolism into a catabolic setting (Tessitore, L., P. Costelli, and F. M. Baccino. 1993. Br. J. Cancer. 67:15-23). The present study was directed to investigate if beta 2-adrenergic agonists, which are known to favor skeletal muscle hypertrophy, could effectively antagonize the enhanced muscle protein breakdown in this cancer cachexia model. One such agent, i.e., clenbuterol, indeed largely prevented skeletal muscle waste in AH-130-bearing rats by restoring protein degradative rates close to control values. This normalization of protein breakdown rates was achieved through a decrease of the hyperactivation of the ATP-ubiquitin-dependent proteolytic pathway, as previously demonstrated in our laboratory (Llovera, M., C. García-Martínez, N. Agell, M. Marzábal, F. J. López-Soriano, and J. M. Argilés. 1994. FEBS (Fed. Eur. Biochem. Soc.) Lett. 338:311-318). By contrast, the drug did not exert any measurable effect on various parenchymal organs, nor did it modify the plasma level of corticosterone and insulin, which were increased and decreased, respectively, in the tumor hosts. The present data give new insights into the mechanisms by which clenbuterol exerts its preventive effect on muscle protein waste and seem to warrant the implementation of experimental protocols involving the use of clenbuterol or alike drugs in the treatment of pathological states involving TPH, particularly in skeletal muscle and heart, such as in the present model of cancer cachexia.

Temporary Traffic Control Handbook, TR-694, 2016

This handbook provides a broad, easy to understand reference for temporary traffic control in work zones, addressing the safe and efficient accommodation of all road users: motorists, bicyclists, pedestrians, and those with special needs. When impacting a pedestrian facility, provide ten calendar days advance notification to the local jurisdiction and the National Federation of the Blind of Iowa (www.nfbi.org). The information presented is based on standards and guidance in the 2009 Edition of the Manual on Uniform Traffic Control Devices (MUTCD). References to the MUTCD sign designations in this handbook are shown in parentheses, e.g. (W20-1). Not all the recommendations in this handbook will apply to every circumstance faced by local agencies, and each unique situation may not be addressed. Modifications of the typical applications in this handbook will be required to adapt to specific field conditions. Therefore, use engineering judgment, seeking the advice of experienced professionals and supervisors in difficult and complex interpretations. This handbook can be used as a reference for temporary traffic control in work zones on all city or county roadways. However, always check contract documents and local agency requirements for any pertinent modifications.

Letter health consultation : Doty Landfill site, Camanche, Iowa EPA Facility ID: IAD980497556 (2008)

The Doty Landfill encompasses 13 acres of land and is located in the southeastern quarter of Section 29, Township 81 North, Range 6 East, Clinton County, Iowa. The site was used as a landfill for municipal solid waste from 1970 to 1975. In addition, local residents have expressed concern that other chemical-or pesticide waste had been disposed at the site. Previous site investigations had been completed in 1992 and in 2005. In October 2007 water samples from private wells located in the vicinity of the Doty Landfill site were collected and analyzed for dissolved metals. Two of the water samples obtained from drinking water wells contained dissolved arsenic above the US EPA Maximum Contaminant Level (MCL) for arsenic of 10 μg/L (micrograms per liter) or 10 ppb (parts per billion). The water samples in question contained dissolved arsenic at concentrations of 19.3 and 14.9 μg/L or 19.3 and 14.9 ppb.

Health consultation : Review of on-site air monitoring data during the removal action at Le Mars coal gas site, Le Mars coal gas plant Le Mars, Plymouth County, Iowa EPA facility ID: IA0001032556 (2005)

The Iowa Department of Public Health (IDPH), Hazardous Waste Site Health Assessment Program was asked by the US Environmental Protection Agency (EPA) to review a round of air sampling data. The air data was collected and analyzed during a removal action at the Le Mars Coal Gas Site in Le Mars, Iowa. EPA asked IDPH to determine from the air data if additional monitoring is necessary throughout the removal action to protect nearby residents from exposure.

Health consultation : Hills, Iowa perchlorate groundwater contamination site, Hills, Johnson County, EPA facility ID: IAN 000704368 (2004)

The U. S. Environmental Protection Agency (EPA) Region 7, as well as concerned citizens, asked the Iowa Department of Public Health (IDPH) Hazardous Waste Site Health Assessment Program to perform a health consultation for the Hills, Iowa Perchlorate Groundwater Contamination Site. Specifically, IDPH was asked to determine if EPA’s action of providing bottled water to residents whose private wells had concentrations of greater than 18 μg/L (micrograms per liter) or 18 parts per billion (ppb) perchlorate is protective of public health, and to address some community health concerns. The information included in this health consultation was current at the time of writing. Data that emerges later could alter this document’s conclusions and recommendations.

Treatment intensification and risk factor control: toward more clinically relevant quality measures.

BACKGROUND: Intensification of pharmacotherapy in persons with poorly controlled chronic conditions has been proposed as a clinically meaningful process measure of quality. OBJECTIVE: To validate measures of treatment intensification by evaluating their associations with subsequent control in hypertension, hyperlipidemia, and diabetes mellitus across 35 medical facility populations in Kaiser Permanente, Northern California. DESIGN: Hierarchical analyses of associations of improvements in facility-level treatment intensification rates from 2001 to 2003 with patient-level risk factor levels at the end of 2003. PATIENTS: Members (515,072 and 626,130; age >20 years) with hypertension, hyperlipidemia, and/or diabetes mellitus in 2001 and 2003, respectively. MEASUREMENTS: Treatment intensification for each risk factor defined as an increase in number of drug classes prescribed, of dosage for at least 1 drug, or switching to a drug from another class within 3 months of observed poor risk factor control. RESULTS: Facility-level improvements in treatment intensification rates between 2001 and 2003 were strongly associated with greater likelihood of being in control at the end of 2003 (P < or = 0.05 for each risk factor) after adjustment for patient- and facility-level covariates. Compared with facility rankings based solely on control, addition of percentages of poorly controlled patients who received treatment intensification changed 2003 rankings substantially: 14%, 51%, and 29% of the facilities changed ranks by 5 or more positions for hypertension, hyperlipidemia, and diabetes, respectively. CONCLUSIONS: Treatment intensification is tightly linked to improved control. Thus, it deserves consideration as a process measure for motivating quality improvement and possibly for measuring clinical performance.

Formation and Control of Trace Metal Emissions in Co-Firing of Biomass, Peat, and Wastes in Fluidised Bed Combustors

Environmentally harmful consequences of fossil fuel utilisation andthe landfilling of wastes have increased the interest among the energy producers to consider the use of alternative fuels like wood fuels and Refuse-Derived Fuels, RDFs. The fluidised bed technology that allows the flexible use of a variety of different fuels is commonly used at small- and medium-sized power plants ofmunicipalities and industry in Finland. Since there is only one mass-burn plantcurrently in operation in the country and no intention to build new ones, the co-firing of pre-processed wastes in fluidised bed boilers has become the most generally applied waste-to-energy concept in Finland. The recently validated EU Directive on Incineration of Wastes aims to mitigate environmentally harmful pollutants of waste incineration and co-incineration of wastes with conventional fuels. Apart from gaseous flue gas pollutants and dust, the emissions of toxic tracemetals are limited. The implementation of the Directive's restrictions in the Finnish legislation is assumed to limit the co-firing of waste fuels, due to the insufficient reduction of the regulated air pollutants in the existing flue gas cleaning devices. Trace metals emission formation and reduction in the ESP, the condensing wet scrubber, the fabric filter, and the humidification reactor were studied, experimentally, in full- and pilot-scale combustors utilising the bubbling fluidised bed technology, and, theoretically, by means of reactor model calculations. The core of the model is a thermodynamic equilibrium analysis. The experiments were carried out with wood chips, sawdust, and peat, and their refuse-derived fuel, RDF, blends. In all, ten different fuels or fuel blends were tested. Relatively high concentrations of trace metals in RDFs compared to the concentrations of these metals in wood fuels increased the trace metal concentrations in the flue gas after the boiler ten- to hundred-folds, when RDF was co-fired with sawdust in a full-scale BFB boiler. In the case of peat, lesser increase in trace metal concentrations was observed, due to the higher initial trace metal concentrations of peat compared to sawdust. Despite the high removal rate of most of the trace metals in the ESP, the Directive emission limits for trace metals were exceeded in each of the RDF co-firing tests. The dominat trace metals in fluegas after the ESP were Cu, Pb and Mn. In the condensing wet scrubber, the flue gas trace metal emissions were reduced below the Directive emission limits, whenRDF pellet was used as a co-firing fuel together with sawdust and peat. High chlorine content of the RDFs enhanced the mercuric chloride formation and hence the mercury removal in the ESP and scrubber. Mercury emissions were lower than theDirective emission limit for total Hg, 0.05 mg/Nm3, in all full-scale co-firingtests already in the flue gas after the ESP. The pilot-scale experiments with aBFB combustor equipped with a fabric filter revealed that the fabric filter alone is able to reduce the trace metal concentrations, including mercury, in the flue gas during the RDF co-firing approximately to the same level as they are during the wood chip firing. Lower trace metal emissions than the Directive limits were easily reached even with a 40% thermal share of RDF co-firing with sawdust.Enrichment of trace metals in the submicron fly ash particle fraction because of RDF co-firing was not observed in the test runs where sawdust was used as the main fuel. The combustion of RDF pellets with peat caused an enrichment of As, Cd, Co, Pb, Sb, and V in the submicron particle mode. Accumulation and release oftrace metals in the bed material was examined by means of a bed material analysis, mass balance calculations and a reactor model. Lead, zinc and copper were found to have a tendency to be accumulated in the bed material but also to have a tendency to be released from the bed material into the combustion gases, if the combustion conditions were changed. The concentration of the trace metal in the combustion gases of the bubbling fluidised bed boiler was found to be a summary of trace metal fluxes from three main sources. They were (1) the trace metal flux from the burning fuel particle (2) the trace metal flux from the ash in the bed, and (3) the trace metal flux from the active alkali metal layer on the sand (and ash) particles in the bed. The amount of chlorine in the system, the combustion temperature, the fuel ash composition and the saturation state of the bed material in regard to trace metals were discovered to be key factors affecting therelease process. During the co-firing of waste fuels with variable amounts of e.g. ash and chlorine, it is extremely important to consider the possible ongoingaccumulation and/or release of the trace metals in the bed, when determining the flue gas trace metal emissions. If the state of the combustion process in regard to trace metals accumulation and/or release in the bed material is not known,it may happen that emissions from the bed material rather than the combustion of the fuel in question are measured and reported.

Suomalaisten jäte- ja jätevesialan yritysten yhteistyömahdollisuudet sekä uudet tuotekonseptit koti- ja ulkomaisen liiketoiminnan kehittämisessä

Diplomityö on tehty osana InnoEnvi-hanketta, joka on Etelä-Suomen ympäristöalan verkostoitumiseen ja tietoyhteiskunnan kehittymiseen tähtäävä toimintakokonaisuus. InnoEnvi on osa Etelä-Suomen maakuntien valmistelemaa InnoElli-ohjelmaa. InnoEnvi-hankkeen päätavoitteena on kehittyvän ympäristöklusterin luominen Etelä-Suomeen. Monet suomalaiset ympäristöalalle erikoistuneet yritykset ovat vielä tänä päivänä pieniä, nuoria ja pirstaleisia, minkä vuoksi ne tarvitsevat tukea ja yhteistyötä varsinkin vientimarkkinoille pyrkiessään. Tämän työn oleellisimpana tavoitteena oli kartoittaa Etelä-Suomen jäte- ja jätehuoltoalan yritysten yhteistyön mahdollisuuksia ja etuja, sekä yhteistyön tuomaa vaikutusta koti- ja ulkomaiseen liiketoimintaan. Tutkimusongelmaa lähestyttiin kartoittamalla Suomen tämänhetkistä jäte- ja jätevesihuollon tilaa ja käytössä olevaa teknologiaa sekä ympäristöliiketoimintaan vaikuttavia ohjauskeinoja. Ympäristöalan liiketoimintakenttään syvennyttiin tutkimalla alan verkostoitumista ja uusia verkostoitumisen mahdollisuuksia. Verkostoituneita yrityksiä ja yhteistyön lisätarvetta selvitettiin InnoEnvissä tehtyjen aiempien tutkimustulosten sekä tässä tutkimuksessa tehtyjen yrityshaastattelujen avulla. Uudet EU-maat panostavat tiukentuvien ympäristösäädösten takia ympäristönsuojeluun, mikä tekee niistä houkuttelevan ympäristöteknologian vientikohteen. Tässä työssä valittiin tutkimuksen kohteiksi Latvia ja Puola, joiden ympäristöteknologian tasoa ja kehitystarpeita selvitettiin vientipotentiaalin hahmottamiseksi. Molempien maiden jätevesi- ja varsinkin jätehuollossa on paljon kehitettävää, ja maissa panostetaankin kehitystoimiin monin erilaisin valtiollisin ohjelmin. Kotimaisen ympäristöliiketoiminnan kehittämiseksi työssä käsiteltiin neljää tuote- ja palvelukonseptia, jotka valittiin InnoEnvi-hankkeessa tehdystä ajankohtaisesta ympäristöalan investointihankekartoituksesta. Valitut konseptit ovat: REF-valmistuslaitos, jätevesilietteen käsittelylaitteisto, pilaantuneiden maiden käsittelytoimet sekä kaatopaikan lopettaminen. Tuotekonseptit jaettiin osatuotteisiin ja –palveluihin, joita verkostoituneet yritykset voisivat yhdessä tuottaa. Työkaluiksi yritysten kontakteihin nähtiin InnoEnvi-hankkeessa muodostetut miniklusterit ja niiden sisällä kehittyvä toiminta sekä hankkeessa rakennettu www-pohjainen Matching-palvelu. Tutkimuksessa löydettiin uusia mahdollisuuksia yhteistyötoiminnalle. Verkostoitumisessa nähdään haastattelujen mukaan monia etuja: tiedonsaanti, taloudelliset edut, toiminnan luotettavuus sekä uudet virikkeet markkinointiin ja tuotekehitykseen. Lisäyhteistyökumppaneille on haastattelujen mukaan tarvetta. Verkostoituminen tuo vientitoimintaa aloitteleville pk-sektorin yrityksille mahdollisuuden saavuttaa kansainvälistymiseen tarvittavia resursseja. Niin koti- kuin ulkomaisessakin liiketoiminnassa verkoston tärkeimmäksi tekijäksi osoittautui veturiyritys, joka voi vastata verkostossa muun muassa markkinoinnista ja tuotekehityksestä Vientitoiminnassa kohdemaan lainsäädännön ja yleisien toimintatapojen tunteminen on tärkeää. Paikalliset kohdemaan suunnittelu- ja urakointiyritykset ovat tärkeitä yhteistyökumppaneita vientihankkeessa. Latviassa jätehuoltoteknologian kehittämisen tarve on niin yhdyskunta-, ongelma- kuin teollisuusjätteidenkin osalta merkittävä. Puolassa jätesektorin ajankohtaisia aiheita ovat muun muassa kaatopaikkojen vähentäminen ja pakkausjätteen käsittely. Molempien esimerkkimaiden kohdalla jätevesihuollossa tullaan keskittymään lietteiden käsittelyn vaatimiin teknologian tarpeisiin. Vientiosiossa tehtiin vientiyhteistyöesimerkki, jossa tutkittiin kuvitteellista rakennusjätteen käsittelylaitoksen toimittamisprojektia Puolaan. Esimerkkiin saatiin tietoja InnoEnvissä tehdystä Puolan markkinatutkimuksesta. Tulokseksi saatiin viitteitä mahdollisista suomalaisista laitetoimittajista, viisi potentiaalista puolalaista suunnitteluyritystä sekä viisi puolalaista urakoitsijaa. On tärkeää, että kotimaisella yritysryppäällä on kokemusta sujuvasta yhteistyöstä ennen vientiprojektin toteuttamista. Tuotekonseptiesimerkkeihin kartoitettiin pääosa eteläsuomalaisista tuotteiden ja palvelujen tarjoajista. Tarkasteluun otettiin mukaan myös yrityksiä, joiden tuotteet tai palvelut olivat lähellä käsiteltyä konseptia. Tehtyjen yrityslistojen avulla on tarkoitus antaa virikkeitä uusien yritysryppäiden muodostamisesta sekä uusista tuote- ja palveluideoista, joille on nähtävissä markkinapotentiaalia. InnoEnvi-hankkeessa valmisteltujen työkalujen avulla eteläsuomalaiset yhteistyöstä kiinnostuneet yritykset voivat luoda kontakteja ja kokoontua miettimään tulevien investointihankkeiden toteuttamista kotimaassa ja myöhemmin jopa ulkomailla. Työn tuloksia esitellään InnoEnvi-hankkeen toimijoiden kautta jäteminiklusterissa toimiville eteläsuomalaisille yrityksille.

Privatization, cooperation and costs of solid waste services in small towns

This paper analyzes the cost implications of privatization and cooperation in the provision of solid waste services for a sample of small municipalities. In conducting this empirical analysis, a survey is first designed and administered to municipalities in the Spanish region of Aragon, and then an estimation of the determinants of service costs is undertaken, considering the possible endogeneity of delivery choices. Our findings indicate that cooperation is more effective than privatization in saving costs. Both production forms can enable small municipalities to cut costs by exploiting scale economies. However, the fact that inter-municipal cooperation involves lower transaction costs and is less likely to be affected by competition problems would seem to account for the fact that it is a more effective way of reducing costs.

L'oxalate: un déchet organique peu soluble, avec conséquences [Oxalate: a poorly soluble organic waste with consequences].

Oxalate is a highly insoluble metabolic waste excreted by the kidneys. Disturbances of oxalate metabolism are encountered in enteric hyperoxaluria (secondary to malabsorption, gastric bypass or in case of insufficient Oxalobacter colonization), in hereditary hyperoxaluria and in intoxication (ethylene glycol, vitamin C). Hyperoxaluria causes a large spectrum of diseases, from isolated hyperoxaluria to kidney stones and nephrocalcinosis formation, eventually leading to kidney failure and systemic oxalosis with life-threatening deposits in vital organs. New causes of hyperoxaluria are arising recently, in particular after gastric bypass surgery, which requires regular and preemptive monitoring. The treatment of hyperoxaluria involves reduction in oxalate intake and increase in calcium intake. Optimal urine dilution and supplementation with inhibitors of kidney stone formation (citrate) are required. Some conditions may need vitamin B6 supplementation, and the addition of probiotics might be useful in the future. Primary care physicians should identify cases of recurrent calcium oxalate stones and severe hyperoxaluria. Further management of hyperoxaluria requires specialized care.

Headspace needle-trap analysis of priority volatile organic compounds from aqueous samples: application to the analysis of natural and waste waters

Combining headspace (HS) sampling with a needle-trap device (NTD) to determine priority volatile organic compounds (VOCs) in water samples results in improved sensitivity and efficiency when compared to conventional static HS sampling. A 22 gauge stainless steel, 51-mm needle packed with Tenax TA and Carboxen 1000 particles is used as the NTD. Three different HS-NTD sampling methodologies are evaluated and all give limits of detection for the target VOCs in the ng L−1 range. Active (purge-and-trap) HS-NTD sampling is found to give the best sensitivity but requires exhaustive control of the sampling conditions. The use of the NTD to collect the headspace gas sample results in a combined adsorption/desorption mechanism. The testing of different temperatures for the HS thermostating reveals a greater desorption effect when the sample is allowed to diffuse, whether passively or actively, through the sorbent particles. The limits of detection obtained in the simplest sampling methodology, static HS-NTD (5 mL aqueous sample in 20 mL HS vials, thermostating at 50 °C for 30 min with agitation), are sufficiently low as to permit its application to the analysis of 18 priority VOCs in natural and waste waters. In all cases compounds were detected below regulated levels

Empirical analysis of solid management waste costs: Some evidence from Galicia, Spain

This paper analyses the factors that determine solid waste service costs. The empirical analysis is based on information derived from a survey conducted in a sample of Galician municipalities. The results reveal economies of scale in municipalities of fewer than 50,000 inhabitants, such that cooperation between these municipalities could lead to cost savings. It also appears that private delivery is not cheaper than public delivery. Finally, designating a larger proportion of the total waste volume to recycling does not imply greater costs.

TREATMENT OF WASTE FROM ATOMIC EMISSION SPECTROMETRIC TECHNIQUES AND REUSE IN UNDERGRADUATE LAB CLASSES FOR QUALITATIVE ANALYSIS

Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma optical emission spectrometry (ICP OES) are widely used in academic institutions and laboratories for quality control to analyze inorganic elements in samples. However, these techniques have been observed to underperform in sample nebulization processes. Most of the samples processed through nebulization system are discarded, producing large volumes of waste. This study reports the treatment and reuse of the waste produced from ICP OES technique in a laboratory of analytical research at the Universidade Federal do Ceará, Brazil. The treatment of the waste was performed by the precipitation of elements using (NH4)2CO3. Subsequently, the supernatant solution can be discarded in accordance with CONAMA 430/2011. The precipitate produced from the treatment of residues can be reused as a potential sample in undergraduate qualitative analytical chemistry lab classes, providing students the opportunity to test a real sample.

Potential of biogas production from swine manure supplemented with glycerine waste

In this study, was studied the biogas generation from swine manure, using residual glycerine supplementation. The biogas production by digestion occurred in the anaerobic batch system under mesophilic conditions (35°C), with a hydraulic retention time of 48 days. The experiment was performed with 48 samples divided into four groups, from these, one was kept as a control (without glycerin) and the other three groups were respectively supplemented with residual glycerine in the percentage of 3%, 6% and 9% of the total volume of the samples. The volume of biogas was controlled by an automated system for reading in laboratory scale and the quality of the biogas (CH4) measured from a specific sensor. The results showed that the residual glycerine has high potential for biogas production, with increases of 124.95%, 156.98% and 197.83% in the groups 3%, 6% and 9%, respectively, relative to the sample control. However, very high organic loads can compromise the process of digestion affecting the quality of the biogas generated in relation to methane.

Sheep production as a Senecio spp. control tool

Since poisoning by Senecio spp. is one of the main causes of cattle death in southern Brazil, control of these plants is a priority for the local livestock production. After the pasture has been mowed, grazing by 16 sheep was efficient for controlling Senecio brasiliensis and Senecio madagascariensis populations in a 5.5-hectare area that had long been severely infested with these species. A total of 28,629 plants among S. brasiliensis (flower-of-souls, 10,122) and S.madagascariensis (fireweed, 18,507) were almost completely eliminated in a two-year period. The number of sheep was kept at 3.0 stock units/ha, but a variable number of cattle were temporarily stocked according to pasture availability. The major sanitary practice applied to the sheep was anthelmintic administration. Liver biopsies taken from sheep and cattle before and after experimental period didn't reveal any change associable with seneciosis. The performance levels of the sheep were comparable to those observed in flocks managed under traditional extensive grazing systems in southern Brazil.