Abundance and biomass of zooplankton from the Romanian littoral collected in April, June and September 1999

The SHELF 1999 dataset contains zooplankton data collected in April, June and September 1999 allong 5 transect in front of the Romanian littoral. Zooplankton sampling was undertaken using a Juday closing net in the 0-10, 10-25, and 25-50m layer (depending also on the water masses). The dataset includes samples analysed for mesozooplankton species composition and abundance. Sampling volume was estimated by multiplying the mouth area with the wire length. Taxon-specific mesozooplankton abundance was count under microscope. Total abundance is the sum of the counted individuals. Total biomass Fodder, Rotifera , Ctenophora and Noctiluca was estimated using a tabel with wet weight for each species an stage.

Cohesive-frictional modelling of bond and splitting action of prestressing wire

This work shows a numerical procedure for bond between indented wires and concrete, and the coupled splitting of the concrete. The bond model is an interface, non-associative, plasticity model. It is coupled with a cohesive fracture model for concrete to take into account the splitting of such concrete. The radial component of the prestressing force, increased by Poisson’s effect, may split the surrounding concrete, decreasing the wire confinement and diminishing the bonding. The combined action of the bond and the splitting is studied with the proposed model. The results of the numerical model are compared with the results of a series of tests, such as those which showed splitting induced by the bond between wire and concrete. Tests with different steel indentation depths were performed. The numerical procedure accurately reproduces the experimental records and improves knowledge of this complex process.

Study of the Edge and Surface Cracks Influence in the Mechanical Strength of Silicon Wafers

The objective of the present study is the estimation of the depth to which the wire sawing process causes damage to the wafer surfaces. Previous analyses were carried out by means of the four line bending test. The characteristic of this test implied that the failure could be due to surface cracks located in the central zone of the wafer or near the edges. In order to evaluate the influence of the edge or surface cracks a new study has been carried out using the ball/ring on ring test. Description and results of the tests are presented. The preliminary analysis of the failure stress using analytical methods confirms the expected results. A Finite Element model developed to get more information of the test results is also presented.

DNS of a hot-wire anemometer in a turbulent channel flow

A body with a shape similar to a hot wire with its sheath, but no prongs, has been placed close to the wall of a turbulent channel at Re_tau = 600. The results of the channel flow, without the wire, agree with previous published ones, despite the modest resolution and domain size. A simplified, two-dimensional version of the wire at the same Reynolds number has been studied to compare the dynamic response of cold and hot wires, where a slightly bigger perturbation is seen in the hot case, but an almost identical dynamic response. The cold wire seems to be able to measure instantaneous velocity with total drag after proper calibration. Being a DNS, the complete description of the flow field around the wire is obtained.

Effects of hydrogen assisted stress corrosion on damage tolerance of a high-strength duplex stainless steel wire for prestressing concrete

The study brings new insights on the hydrogen assisted stress corrosion on damage tolerance of a high-strength duplex stainless steel wire which concerns its potential use as active reinforcement for concrete prestressing. The adopted procedure was to experimentally state the effect of hydrogen on the damage tolerance of cylindrical smooth and precracked wire specimens exposed to stress corrosion cracking using the aggressive medium of the standard test developed by FIP (International Prestressing Federation). Stress corrosion testing, mechanical fracture tests and scanning electron microscopy analysis allowed the damage assessment, and explain the synergy between mechanical loading and environment action on the failure sequence of the wire. In presence of previous damage, hydrogen affects the wire behavior in a qualitative sense, consistently to the fracture anisotropy attributable to cold drawing, but it does not produce quantitative changes since the steel fully preserves its damage tolerance.

Abundance and biomass of mesozooplankton collected in front of the Danube Delta in May and October 1978

The Gurile Dunarii 1978 dataset contains zooplankton data collected in May and October 1978 in 14 station allong 3 transect in front of the Danube Delta (45°05' - 44°45'N, 30°02'- 29°27'E). Zooplankton sampling was undertaken at 14 stations where samples were collected using a Juday closing net in the 0-10, 10-20, 20-30, 30-40 and 40-50m layer (depending also on the water masses). The dataset includes samples analysed for mesozooplankton species composition and abundance. Sampling volume was estimated by multiplying the mouth area with the wire length. Taxon-specific mesozooplankton abundance was count under microscope. Total abundance is the sum of the counted individuals. Total biomass Fodder, Rotifera , Ctenophora and Noctiluca was estimated using a tabel with wet weight for each species an stage.

The vibrational spectra of rectangular plates

The wire drive pulse-echo system has been extensively used to excite and measure modes of vibration of thin rectangular plates. The frequency spectra of different modes have been investigated as a function of the material elastic moduli and the plate geometry. Most of the work was carried out on isotropic materials. For square plates a wide selection of materials were used. These were made isotropic in their in-plane dimensions where the displacements are taking place. The range of rnaterials enabled the dependence on Poisson's ratio to be investigated. A method of determining the value of Poisson's ratio resulted from this investigation. Certain modes are controlled principally by the shear modulus. Of these the fundamental has two nodal lines across the plate surface. One of them, which has nodes at the corners, (the Lame mode) is uniquely a pure shear mode where the diagonal is a full wave length. One controlled by the Young's modulus has been found. The precise harmonic relationship of the Lame mode series in square and rectangular plates was established. Use of the Rayleigh-Lamb equation has extended the theoretical support. The low order modes were followed over a wide range of sides ratios. Two fundamental types of modes have been recognised; These are the longitudinal modes where the frequency is controlled by the length of the plate only and the 2~f product has an asymptotic value approaching the rod velocity. The other type is the in-plane flexural modes (in effect a flexurally vibrating bar where the -2/w is the geometrical parameter). Where possible the experimental work was related to theory. Other modes controlled by the width dimension of the plate were followed. Anisotropic materials having rolled sheet elastic symmetry were investigated in terms of the appropriate theory. The work has been extended to examine materials from welds in steel plates.

Une étude générique du metteur en scène au théâtre:son émergence et son rôle moderne et contemporain

The theatre director (metteur en scene in French) is a relatively new figure in theatre practice. It was not until the I820s that the term 'mise en scene' gained currency. The term 'director' was not in general use until the I880s. The emergence and the role of the director has been considered from a variety of perspectives, either through the history of theatre (Allevy, Jomaron, Sarrazac, Viala, Biet and Triau); the history of directing (Chinoy and Cole, Boll, Veinstein, Roubine); semiotic approaches to directing (Whitmore, Miller, Pavis); the semiotics of performance (De Marinis); generic approaches to the mise en scene (Thomasseau, Banu); post-dramatic approaches to theatre (Lehmann); approaches to performance process and the specifics of rehearsal methodology (Bradby and Williams, Giannachi and Luckhurst, Picon-Vallin, Styan). What the scholarly literature has not done so far is to map the parameters necessarily involved in the directing process, and to incorporate an analysis of the emergence of the theatre director during the modem period and consider its impact on contemporary performance practice. Directing relates primarily to the making of the performance guided by a director, a single figure charged with the authority to make binding artistic decisions. Each director may have her/his own personal approaches to the process of preparation prior to a show. This is exemplified, for example, by the variety of terms now used to describe the role and function of directing, from producer, to facilitator or outside eye. However, it is essential at the outset to make two observations, each of which contributes to a justification for a generic analysis (as opposed to a genetic approach). Firstly, a director does not work alone, and cooperation with others is involved at all stages of the process. Secondly, beyond individual variation, the role of the director remains twofold. The first is to guide the actors (meneur de jeu, directeur d'acteurs, coach); the second is to make a visual representation in the performance space (set designer, stage designer, costume designer, lighting designer, scenographe). The increasing place of scenography has brought contemporary theatre directors such as Wilson, Castellucci, Fabre to produce performances where the performance space becomes a semiotic dimension that displaces the primacy of the text. The play is not, therefore, the sole artistic vehicle for directing. This definition of directing obviously calls for a definition of what the making of the performance might be. The thesis defines the making of the performance as the activity of bringing a social event, by at least one performer, providing visual and/or textual meaning in a performance space. This definition enables us to evaluate four consistent parameters throughout theatre history: first, the social aspect associated to the performance event; second, the devising process which may be based on visual and/or textual elements; third, the presence of at least one performer in the show; fourth, the performance space (which is not simply related to the theatre stage). Although the thesis focuses primarily on theatre practice, such definition blurs the boundaries between theatre and other collaborative artistic disciplines (cinema, opera, music and dance). These parameters illustrate the possibility to undertake a generic analysis of directing, and resonate with the historical, political and artistic dimensions considered. Such a generic perspective on the role of the director addresses three significant questions: an historical question: how/why has the director emerged?; a sociopolitical question: how/why was the director a catalyst for the politicisation of theatre, and subsequently contributed to the rise of State-funded theatre policy?; and an artistic one: how/why the director has changed theatre practice and theory in the twentieth-century? Directing for the theatre as an artistic activity is a historically situated phenomenon. It would seem only natural from a contemporary perspective to associate the activity of directing to the function of the director. This is relativised, however, by the question of how the performance was produced before the modern period. The thesis demonstrates that the rise of the director is a progressive and historical phenomenon (Dort) rather than a mere invention (Viala, Sarrazac). A chronological analysis of the making of the performance throughout theatre history is the most useful way to open the study. In order to understand the emergence of the director, the research methodology assesses the interconnection of the four parameters above throughout four main periods of theatre history: the beginning of the Renaissance (meneur de jeu), the classical age (actor-manager and stage designer-manager), the modern period (director) and the contemporary period (director-facilitator, performer). This allows us properly to appraise the progressive emergence of the director, as well as to make an analysis of her/his modern and contemporary role. The first chapter argues that the physical separation between the performance space and its audience, which appeared in the early fifteenth-century, has been a crucial feature in the scenographic, aesthetic, political and social organisation of the performance. At the end of the Middle Ages, French farces which raised socio-political issues (see Bakhtin) made a clear division on a single outdoor stage (treteau) between the actors and the spectators, while religious plays (drame fiturgique, mystere) were mostly performed on various outdoor and opened multispaces. As long as the performance was liturgical or religious, and therefore confined within an acceptable framework, it was allowed. At the time, the French ecclesiastical and civil authorities tried, on several occasions, to prohibit staged performances. As a result, practitioners developed non-official indoor spaces, the Theatre de fa Trinite (1398) being the first French indoor theatre recognized by scholars. This self-exclusion from the open public space involved breaking the accepted rules by practitioners (e.g. Les Confreres de fa Passion), in terms of themes but also through individual input into a secular performance rather than the repetition of commonly known religious canvases. These developments heralded the authorised theatres that began to emerge from the mid-sixteenth century, which in some cases were subsidised in their construction. The construction of authorised indoor theatres associated with the development of printing led to a considerable increase in the production of dramatic texts for the stage. Profoundly affecting the reception of the dramatic text by the audience, the distance between the stage and the auditorium accompanied the changing relationship between practitioners and spectators. This distance gave rise to a major development of the role of the actor and of the stage designer. The second chapter looks at the significance of both the actor and set designer in the devising process of the performance from the sixteenth-century to the end of the nineteenth-century. The actor underwent an important shift in function in this period from the delivery of an unwritten text that is learned in the medieval oral tradition to a structured improvisation produced by the commedia dell 'arte. In this new form of theatre, a chef de troupe or an experienced actor shaped the story, but the text existed only through the improvisation of the actors. The preparation of those performances was, moreover, centred on acting technique and the individual skills of the actor. From this point, there is clear evidence that acting began to be the subject of a number of studies in the mid-sixteenth-century, and more significantly in the seventeenth-century, in Italy and France. This is revealed through the implementation of a system of notes written by the playwright to the actors (stage directions) in a range of plays (Gerard de Vivier, Comedie de la Fidelite Nuptiale, 1577). The thesis also focuses on Leoni de' Sommi (Quatro dialoghi, 1556 or 1565) who wrote about actors' techniques and introduced the meneur de jeu in Italy. The actor-manager (meneur de jeu), a professional actor, who scholars have compared to the director (see Strihan), trained the actors. Nothing, however, indicates that the actor-manager was directing the visual representation of the text in the performance space. From the end of the sixteenth-century, the dramatic text began to dominate the process of the performance and led to an expansion of acting techniques, such as the declamation. Stage designers carne from outside the theatre tradition and played a decisive role in the staging of religious celebrations (e.g. Actes des Apotres, 1536). In the sixteenth-century, both the proscenium arch and the borders, incorporated in the architecture of the new indoor theatres (theatre a l'italienne), contributed to create all kinds of illusions on the stage, principally the revival of perspective. This chapter shows ongoing audience demands for more elaborate visual effects on the stage. This led, throughout the classical age, and even more so during the eighteenth-century, to grant the stage design practitioner a major role in the making of the performance (see Ciceri). The second chapter demonstrates that the guidance of the actors and the scenographic conception, which are the artistic components of the role of the director, appear to have developed independently from one another until the nineteenth-century. The third chapter investigates the emergence of the director per se. The causes for this have been considered by a number of scholars, who have mainly identified two: the influence of Naturalism (illustrated by the Meiningen Company, Antoine, and Stanislavski) and the invention of electric lighting. The influence of the Naturalist movement on the emergence of the modem director in the late nineteenth-century is often considered as a radical factor in the history of theatre practice. Naturalism undoubtedly contributed to changes in staging, costume and lighting design, and to a more rigorous commitment to the harmonisation and visualisation of the overall production of the play. Although the art of theatre was dependent on the dramatic text, scholars (Osborne) demonstrate that the Naturalist directors did not strictly follow the playwright's indications written in the play in the late nineteenth-century. On the other hand, the main characteristic of directing in Naturalism at that time depended on a comprehensive understanding of the scenography, which had to respond to the requirements of verisimilitude. Electric lighting contributed to this by allowing for the construction of a visual narrative on stage. However, it was a master technician, rather than an emergent director, who was responsible for key operational decisions over how to use this emerging technology in venues such as the new Bayreuth theatre in 1876. Electric lighting reflects a normal technological evolution and cannot be considered as one of the main causes of the emergence of the director. Two further causes of the emergence of the director, not considered in previous studies, are the invention of cinema and the Symbolist movement (Lugne-Poe, Meyerhold). Cinema had an important technological influence on the practitioners of the Naturalist movement. In order to achieve a photographic truth on the stage (tableau, image), Naturalist directors strove to decorate the stage with the detailed elements that would be expected to be found if the situation were happening in reality. Film production had an influence on the work of actors (Walter). The filmmaker took over a primary role in the making of the film, as the source of the script, the filming process and the editing of the film. This role influenced the conception that theatre directors had of their own work. It is this concept of the director which influenced the development of the theatre director. As for the Symbolist movement, the director's approach was to dematerialise the text of the playwright, trying to expose the spirit, movement, colour and rhythm of the text. Therefore, the Symbolists disengaged themselves from the material aspect of the production, and contributed to give greater artistic autonomy to the role of the director. Although the emergence of the director finds its roots amongst the Naturalist practitioners (through a rigorous attempt to provide a strict visual interpretation of the text on stage), the Symbolist director heralded the modem perspective of the making of performance. The emergence of the director significantly changed theatre practice and theory. For instance, the rehearsal period became a clear work in progress, a platform for both developing practitioners' techniques and staging the show. This chapter explores and contrasts several practitioners' methods based on the two aspects proposed for the definition of the director (guidance of the actors and materialisation of a visual space). The fourth chapter argues that the role of the director became stronger, more prominent, and more hierarchical, through a more political and didactic approach to theatre as exemplified by the cases of France and Germany at the end of the nineteenth-century and through the First World War. This didactic perspective to theatre defines the notion of political theatre. Political theatre is often approached by the literature (Esslin, Willett) through a Marxist interpretation of the great German directors' productions (Reinhardt, Piscator, Brecht). These directors certainly had a great influence on many directors after the Second World War, such as Jean Vilar, Judith Molina, Jean-Louis Barrault, Roger Planchon, Augusto Boal, and others. This chapter demonstrates, moreover, that the director was confirmed through both ontological and educational approaches to the process of making the performance, and consequently became a central and paternal figure in the organisational and structural processes practiced within her/his theatre company. In this way, the stance taken by the director influenced the State authorities in establishing theatrical policy. This is an entirely novel scholarly contribution to the study of the director. The German and French States were not indifferent to the development of political theatre. A network of public theatres was thus developed in the inter-war period, and more significantly after the Second World War. The fifth chapter shows how State theatre policies establish its sources in the development of political theatre, and more specifically in the German theatre trade union movement (Volksbiihne) and the great directors at the end of the nineteenth-century. French political theatre was more influenced by playwrights and actors (Romain Rolland, Louise Michel, Louis Lumet, Emile Berny). French theatre policy was based primarily on theatre directors who decentralised their activities in France during both the inter-war period and the German occupation. After the Second World War, the government established, through directors, a strong network of public theatres. Directors became both the artistic director and the executive director of those institutionalised theatres. The institution was, however, seriously shaken by the social and political upheaval of 1968. It is the link between the State and the institution in which established directors were entangled that was challenged by the young emerging directors who rejected institutionalised responsibility in favour of the autonomy of the artist in the 1960s. This process is elucidated in chapter five. The final chapter defines the contemporary role of the director in contrasting thework of a number of significant young theatre practitioners in the 1960s such as Peter Brook, Ariane Mnouchkine, The Living Theater, Jerzy Grotowski, Augusto Boal, Eugenio Barba, all of whom decided early on to detach their companies from any form of public funding. This chapter also demonstrates how they promoted new forms of performance such as the performance of the self. First, these practitioners explored new performance spaces outside the traditional theatre building. Producing performances in a non-dedicated theatre place (warehouse, street, etc.) was a more frequent practice in the 1960s than before. However, the recent development of cybertheatre questions both the separation of the audience and the practitioners and the place of the director's role since the 1990s. Secondly, the role of the director has been multifaceted since the 1960s. On the one hand, those directors, despite all their different working methods, explored western and non-western acting techniques based on both personal input and collective creation. They challenged theatrical conventions of both the character and the process of making the performance. On the other hand, recent observations and studies distinguish the two main functions of the director, the acting coach and the scenographe, both having found new developments in cinema, television, and in various others events. Thirdly, the contemporary director challenges the performance of the text. In this sense, Antonin Artaud was a visionary. His theatre illustrates the need for the consideration of the totality of the text, as well as that of theatrical production. By contrasting the theories of Artaud, based on a non-dramatic form of theatre, with one of his plays (Le Jet de Sang), this chapter demonstrates how Artaud examined the process of making the performance as a performance. Live art and autobiographical performance, both taken as directing the se(f, reinforce this suggestion. Finally, since the 1990s, autobiographical performance or the performance of the self is a growing practical and theoretical perspective in both performance studies and psychology-related studies. This relates to the premise that each individual is making a representation (through memory, interpretation, etc.) of her/his own life (performativity). This last section explores the links between the place of the director in contemporary theatre and performers in autobiographical practices. The role of the traditional actor is challenged through non-identification of the character in the play, while performers (such as Chris Burden, Ron Athey, Orlan, Franko B, Sterlac) have, likewise, explored their own story/life as a performance. The thesis demonstrates the validity of the four parameters (performer, performance space, devising process, social event) defining a generic approach to the director. A generic perspective on the role of the director would encompass: a historical dimension relative to the reasons for and stages of the 'emergence' of the director; a socio-political analysis concerning the relationship between the director, her/his institutionalisation, and the political realm; and the relationship between performance theory, practice and the contemporary role of the director. Such a generic approach is a new departure in theatre research and might resonate in the study of other collaborative artistic practices.

Lubrication efficiency and die design in wire drawing

With the competitive challenge facing business today, the need to keep cost down and quality up is a matter of survival. One way in which wire manufacturers can meet this challenge is to possess a thorough understanding of deformation, friction and lubrication during the wire drawing process, and therefore to make good decisions regarding the selection and application of lubricants as well as the die design. Friction, lubrication and die design during wire drawing thus become the subject of this study. Although theoretical and experimental investigations have been being carried out ever since the establishment of wire drawing technology, many problems remain unsolved. It is therefore necessary to conduct further research on traditional and fundamental subjects such as the mechanics of deformation, friction, lubrication and die design in wire drawing. Drawing experiments were carried out on an existing bull-block under different cross-sectional area reductions, different speeds and different lubricants. The instrumentation to measure drawing load and drawing speed was set up and connected to the wire drawing machine, together with a data acquisition system. A die box connected to the existing die holder for using dry soap lubricant was designed and tested. The experimental results in terms of drawing stress vs percentage area reduction curves under different drawing conditions were analysed and compared. The effects on drawing stress of friction, lubrication, drawing speed and pressure die nozzle are discussed. In order to determine the flow stress of the material during deformation, tensile tests were performed on an Instron universal test machine, using the wires drawn under different area reductions. A polynomial function is used to correlate the flow stress of the material with the plastic strain, on which a general computer program has been written to find out the coefficients of the stress-strain function. The residual lubricant film on the steel wire after drawing was examined both radially and longitudinally using an SEM and optical microscope. The lubricant film on the drawn wire was clearly observed. Therefore, the micro-analysis by SEM provides a way of friction and lubrication assessment in wire drawing.

Quantum wire hybridized with a single-level impurity

We have studied low-temperature properties of interacting electrons in a one-dimensional quantum wire (Luttinger liquid) side-hybridized with a single-level impurity. The hybridization induces a backscattering of electrons in the wire which strongly affects its low-energy properties. Using a one-loop renormalization group approach valid for a weak electron-electron interaction, we have calculated a transmission coefficient through the wire, T(epsilon), and a local density of states, nu(epsilon) at low energies epsilon. In particular, we have found that the antiresonance in T(epsilon) has a generalized Breit-Wigner shape with the effective width Gamma(epsilon) which diverges at the Fermi level.

In situ diagnostics and prognostics of wire bonding faults in IGBT modules for electric vehicle drives

This paper presents a diagnostic and prognostic condition monitoring method for insulated-gate bipolar transistor (IGBT) power modules for use primarily in electric vehicle applications. The wire-bond-related failure, one of the most commonly observed packaging failures, is investigated by analytical and experimental methods using the on-state voltage drop as a failure indicator. A sophisticated test bench is developed to generate and apply the required current/power pulses to the device under test. The proposed method is capable of detecting small changes in the failure indicators of the IGBTs and freewheeling diodes and its effectiveness is validated experimentally. The novelty of the work lies in the accurate online testing capacity for diagnostics and prognostics of the power module with a focus on the wire bonding faults, by injecting external currents into the power unit during the idle time. Test results show that the IGBT may sustain a loss of half the bond wires before the impending fault becomes catastrophic. The measurement circuitry can be embedded in the IGBT drive circuits and the measurements can be performed in situ when the electric vehicle stops in stop-and-go, red light traffic conditions, or during routine servicing.

The design, implementation and production process of creating a viable series of Latin shows in Hollywood, Florida

The purpose of this research was to design and implement a Series of Latin Shows to be featured at the Satine Restaurant located in The Diplomat Hotel in Hollywood, Florida. Three shows were created: "Electro Tango," "Bossa Nova Jazz," and "Piel Canela Night" to help generate interest for not only the Satine Restaurant but also for the surrounding area. The artistic concept included big bands, costumes, dancers and a DJ. A production book was created and included the most important aspects of the individual shows such as budgets, costumes, and ground plans, to assure the success of each event. Careful analysis was done for the demographic area and a marketing plan was designed and implemented. The research and practical application of similar shows in the industry determined that the production of these particular shows, although costly, have a qualifiable chance to succeed in this venue.

Returning to an old question: What do television actors do when they act?

This article argues for acknowledging and exploring actors’ processes in critical considerations of television drama. Theatre studies boasts a tradition of research privileging the actor, including a century’s worth of actor-training manuals, academic works observing rehearsals and performances and actor accounts. However, such considerations within television studies are relatively nascent. Drawing upon continuing drama as a fertile case study for investigating the specificities of television acting, the article concludes that the only way to understand television acting is through the analysis of insights from actors themselves, in combination with the well-established practices of analysing the textual end products of television acting.

Raman Analysis of Dilute Aqueous Samples by Localized Evaporation of Submicroliter Droplets on the Tips of Superhydrophobic Copper Wires

Raman analysis of dilute aqueous solutions is normally prevented by their low signal levels. A very general method to increase the concentration to detectable levels is to evaporate droplets of the sample to dryness, creating solid deposits which are then Raman probed. Here, superhydrophobic (SHP) wires with hydrophilic tips have been used as supports for drying droplets, which have the advantage that the residue is automatically deposited at the tip. The SHP wires were readily prepared in minutes using electroless galvanic deposition of Ag onto copper wires followed by modification with a polyfluorothiol (3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluoro-1-decanethiol, HDFT). Cutting the coated wires with a scalpel revealed hydrophilic tips which could support droplets whose maximum size was determined by the wire diameter. Typically, 230 μm wires were used to support 0.6 μL droplets. Evaporation of dilute melamine droplets gave solid deposits which could be observed by scanning electron microscopy (SEM) and Raman spectroscopy. The limit of detection for melamine using a two stage evaporation procedure was 1 × 10^-6 mol dm^-3. The physical appearance of dried droplets of sucrose and glucose showed that the samples retained significant amounts of water, even under high vacuum. Nonetheless, the Raman detection limits of sucrose and glucose were 5 × 10^-4 and 2.5 × 10^-3 mol dm^-3, respectively, which is similar to the sensitivity reported for surface-enhanced Raman spectroscopy (SERS) detection of glucose. It was also possible to quantify the two sugars in mixtures at concentrations which were similar to those found in human blood through multivariate analysis.

Essay, The courts martial of the 1916 leaders

This website contains digital images of the 15 courtmartial files of the executed leaders. The originals, released to the public in 2001, are in the custody of The National Archives in London; the images are displayed under licence from TNA. The website has a searchable database relating to the files, which can also be browsed by name. There are also two essays, one by Dr. Fearghal McGarry on the general context of the trials, the other by Dr. Myles Dungan on their dubious legality. These are the basic records of one of the most eventful and fateful processes in modern Irish history.
Purchase of the digital images of these records was made possible by Universities Ireland, the umbrella body which promotes co-operation between all the universities on the Island of Ireland. The purchase forms part of their extensive Decade of Centenaries programme. Further details can be found at http://universitiesireland.ie/