Effectiveness of Low-Cost Planting Techniques for Improving Water Availability to Olea europaea Seedlings in Degraded Drylands

Reforestation projects in semiarid lands often yield poor results. Water scarcity, poor soil fertility, and structure strongly limit the survival and growth of planted seedlings in these areas. At two experimental semiarid sites, we evaluated a variety of low-cost planting techniques in order to increase water availability to plants. Treatments included various combinations of traditional planting holes; water-harvesting microcatchments; stone or plastic mulches; small waterproof sheets to increase water harvesting; dry wells; buried clay pots; and deep irrigation. Some of these treatments were also combined with addition of composted biosolids. Waterproof sheets significantly enhanced water harvesting (43%) and soil moisture in the planting hole (40%), especially for low-intensity rainfall events. Treatment effects on the survival and growth of Olea europaea seedlings varied between experimental sites. At the most water-limited site, clay pots, and dry wells improved seedling survival, while no treatment enhanced seedling growth. At the least water-stressed site, the application of composted sludge significantly improved seedling growth. We conclude that nutrient-mediated stress is subordinate to water stress in arid and semiarid environments, and we suggest modifications on the microsite scale to address these limiting conditions in Mediterranean drylands.

Low-cost batteries will not disrupt (all) energy utilities. CEPS Commentary, 5 October 2015

With the launch last April of an affordable lithium-ion home battery – the Powerwall – Tesla’s CEO Elon Musk is betting that batteries are going to become a mass market. This may very well become reality, but this commentary argues that one should not jump to the conclusion that this is the end of energy utilities. Similar to solar panels, batteries have high upfront costs. The massive deployment of solar was driven by dedicated policy support, in many cases without any kind of cost or volume control. There is no such thing for batteries. In the absence of financing programmes, the author finds that high upfront costs provide an unfavourable starting point for a disruptive development. But he notes that the fact that self-consumption of stored solar energy will soon pay for consumers represents a paradigm shift in the power industry, which should be seen as an opportunity, at least for first-movers.

Cost of tobacco-related diseases, including passive smoking, in Hong Kong

Background: Costs of tobacco-related disease can be useful evidence to support tobacco control. In Hong Kong we now have locally derived data on the risks of smoking, including passive smoking. Aim: To estimate the health-related costs of tobacco from both active and passive smoking. Methods: Using local data, we estimated active and passive smoking-attributable mortality, hospital admissions, outpatient, emergency and general practitioner visits for adults and children, use of nursing homes and domestic help, time lost from work due to illness and premature mortality in the productive years. Morbidity risk data were used where possible but otherwise estimates based on mortality risks were used. Utilisation was valued at unit costs or from survey data. Work time lost was valued at the median wage and an additional costing included a value of US$1.3 million for a life lost. Results: In the Hong Kong population of 6.5 million in 1998, the annual value of direct medical costs, long term care and productivity loss was US$532 million for active smoking and US$156 million for passive smoking; passive smoking accounted for 23% of the total costs. Adding the value of attributable lives lost brought the annual cost to US$9.4 billion. Conclusion: The health costs of tobacco use are high and represent a net loss to society. Passive smoking increases these costs by at least a quarter. This quantification of the costs of tobacco provides strong motivation for legislative action on smoke-free areas in the Asia Pacific Region and elsewhere.

Regulatory price performance, excess cost indexes and profitability:how effective is price cap regulation in the water industry?

In this study we apply an index number approach to allow for cross sectional comparisons of relative profitability, productivity and price performance of the regulated Water and Sewerage companies (WaSCs) in England and Wales during the years 1991-2008. In order to better analyse the impact of regulation on WaSC performance, we decompose actual economic profits into spatial multilateral Fisher productivity (TFP) index, the inverse of which is demonstrated to be a regulatory excess cost index that measures the deviation of a firm’s actual costs from benchmark costs, and a newly developed regulatory total price performance (TPP) index, which measures the excess of regulated revenues relative to benchmark costs. Increases (decreases) in regulatory price performance are indicative of the loosening (tightening) of price cap regulation. Moreover, we also show that the relationship between actual economic profitability, regulatory excess costs and regulatory price performance indices can be used to categorize regulatory price caps as “weak”, “powerful” or “catch-up promoting”. The results indicated that throughout the entire 1991-2008 period, price caps were never “powerful”, in the sense that they required less productive firms to immediately and fully catch-up to the most productive firm to regain economic profitability. More specifically, during the years 1991-2000 price caps were “weak” as prices were high enough for the firms to achieve economic profits despite their low productivity levels. However, after 2001 prices became “catch up promoting” as they required less productive companies to eliminate at least some excess costs in order to eliminate economic losses. Finally, we emphasize that as our results also clearly demonstrated a much closer alignment between allowed revenues and benchmark costs after 2001, Ofwat’s approach during this period was not only appropriate, but should also be continued in the 2009 price review.

Measurement of productivity and cost of the direct labour organisation within highways maintenance departments

The objective of this thesis is to investigate, through an empirical study, the different functions of the highways maintenance departments and to suggest methods by means of which road maintenance work could be carried out in a more efficient way by utilising its resources of men, material and plant to the utmost advantage. This is particularly important under the present circumstances of national financial difficulties which have resulted in continuous cuts in public expenditure. In order to achieve this objective, the researcher carried out a survey among several Highways Authorities by means of questionnaire and interview. The information so collected was analysed in order to understand the actual, practical situation within highways manintenance departments, and highlight any existing problems, and try to answer the question of how they could become more efficient. According to the results obtained by the questionnaire and the interview, and the analysis of these results, the researcher concludes that it is the management system where least has been done, and where problems exist and are most complex. The management of highways maintenance departments argue that the reasons for their problems include both financial and organisational difficulties, apart from the political aspect and nature of the activities undertaken. The researcher believes that this ought to necessitate improving the management's analytical tools and techniques in order to achieve the most effective way of performing each activity. To this end the researcher recommends several related procedures to be adopted by the management of the highways maintenance departments. These recommendations, arising from the study, involve the technical, practical and human aspects. These are essential factors of which management should be aware - and certainly should not neglect - in order to achieve its objectives of improved productivity in the highways maintenance departments.

Rapid testing for group B streptococcus during labour: a test accuracy study with evaluation of acceptability and cost-effectiveness

OBJECTIVE: To determine the accuracy, acceptability and cost-effectiveness of polymerase chain reaction (PCR) and optical immunoassay (OIA) rapid tests for maternal group B streptococcal (GBS) colonisation at labour. DESIGN: A test accuracy study was used to determine the accuracy of rapid tests for GBS colonisation of women in labour. Acceptability of testing to participants was evaluated through a questionnaire administered after delivery, and acceptability to staff through focus groups. A decision-analytic model was constructed to assess the cost-effectiveness of various screening strategies. SETTING: Two large obstetric units in the UK. PARTICIPANTS: Women booked for delivery at the participating units other than those electing for a Caesarean delivery. INTERVENTIONS: Vaginal and rectal swabs were obtained at the onset of labour and the results of vaginal and rectal PCR and OIA (index) tests were compared with the reference standard of enriched culture of combined vaginal and rectal swabs. MAIN OUTCOME MEASURES: The accuracy of the index tests, the relative accuracies of tests on vaginal and rectal swabs and whether test accuracy varied according to the presence or absence of maternal risk factors. RESULTS: PCR was significantly more accurate than OIA for the detection of maternal GBS colonisation. Combined vaginal or rectal swab index tests were more sensitive than either test considered individually [combined swab sensitivity for PCR 84% (95% CI 79-88%); vaginal swab 58% (52-64%); rectal swab 71% (66-76%)]. The highest sensitivity for PCR came at the cost of lower specificity [combined specificity 87% (95% CI 85-89%); vaginal swab 92% (90-94%); rectal swab 92% (90-93%)]. The sensitivity and specificity of rapid tests varied according to the presence or absence of maternal risk factors, but not consistently. PCR results were determinants of neonatal GBS colonisation, but maternal risk factors were not. Overall levels of acceptability for rapid testing amongst participants were high. Vaginal swabs were more acceptable than rectal swabs. South Asian women were least likely to have participated in the study and were less happy with the sampling procedure and with the prospect of rapid testing as part of routine care. Midwives were generally positive towards rapid testing but had concerns that it might lead to overtreatment and unnecessary interference in births. Modelling analysis revealed that the most cost-effective strategy was to provide routine intravenous antibiotic prophylaxis (IAP) to all women without screening. Removing this strategy, which is unlikely to be acceptable to most women and midwives, resulted in screening, based on a culture test at 35-37 weeks' gestation, with the provision of antibiotics to all women who screened positive being most cost-effective, assuming that all women in premature labour would receive IAP. The results were sensitive to very small increases in costs and changes in other assumptions. Screening using a rapid test was not cost-effective based on its current sensitivity, specificity and cost. CONCLUSIONS: Neither rapid test was sufficiently accurate to recommend it for routine use in clinical practice. IAP directed by screening with enriched culture at 35-37 weeks' gestation is likely to be the most acceptable cost-effective strategy, although it is premature to suggest the implementation of this strategy at present.

Improving the cost-effectiveness of photographic screening for diabetic macular oedema:a prospective, multi-centre, UK study

Background/aims: Retinal screening programmes in England and Scotland have similar photographic grading schemes for background (non-proliferative) and proliferative diabetic retinopathy, but diverge over maculopathy. We looked for the most cost-effective method of identifying diabetic macular oedema from retinal photographs including the role of automated grading and optical coherence tomography, a technology that directly visualises oedema. Methods: Patients from seven UK centres were recruited. The following features in at least one eye were required for enrolment: microaneurysms/dot haemorrhages or blot haemorrhages within one disc diameter, or exudates within one or two disc diameters of the centre of the macula. Subjects had optical coherence tomography and digital photography. Manual and automated grading schemes were evaluated. Costs and QALYs were modelled using microsimulation techniques. Results: 3540 patients were recruited, 3170 were analysed. For diabetic macular oedema, England's scheme had a sensitivity of 72.6% and specificity of 66.8%; Scotland 's had a sensitivity of 59.5% and specificity of 79.0%. When applying a ceiling ratio of £30 000 per quality adjusted life years (QALY) gained, Scotland's scheme was preferred. Assuming automated grading could be implemented without increasing grading costs, automation produced a greater number of QALYS for a lower cost than England's scheme, but was not cost effective, at the study's operating point, compared with Scotland's. The addition of optical coherence tomography, to each scheme, resulted in cost savings without reducing health benefits. Conclusions: Retinal screening programmes in the UK should reconsider the screening pathway to make best use of existing and new technologies.

Time, Cost, and Environmental Impact Analysis for Sustainable Design at Multiple Building Levels

Construction projects are complex endeavors that require the involvement of different professional disciplines in order to meet various project objectives that are often conflicting. The level of complexity and the multi-objective nature of construction projects lend themselves to collaborative design and construction such as integrated project delivery (IPD), in which relevant disciplines work together during project conception, design and construction. Traditionally, the main objectives of construction projects have been to build in the least amount of time with the lowest cost possible, thus the inherent and well-established relationship between cost and time has been the focus of many studies. The importance of being able to effectively model relationships among multiple objectives in building construction has been emphasized in a wide range of research. In general, the trade-off relationship between time and cost is well understood and there is ample research on the subject. However, despite sustainable building designs, relationships between time and environmental impact, as well as cost and environmental impact, have not been fully investigated. The objectives of this research were mainly to analyze and identify relationships of time, cost, and environmental impact, in terms of CO2 emissions, at different levels of a building: material level, component level, and building level, at the pre-use phase, including manufacturing and construction, and the relationships of life cycle cost and life cycle CO2 emissions at the usage phase. Additionally, this research aimed to develop a robust simulation-based multi-objective decision-support tool, called SimulEICon, which took construction data uncertainty into account, and was capable of incorporating life cycle assessment information to the decision-making process. The findings of this research supported the trade-off relationship between time and cost at different building levels. Moreover, the time and CO2 emissions relationship presented trade-off behavior at the pre-use phase. The results of the relationship between cost and CO2 emissions were interestingly proportional at the pre-use phase. The same pattern continually presented after the construction to the usage phase. Understanding the relationships between those objectives is a key in successfully planning and designing environmentally sustainable construction projects.

The cost of a minimum essential food basket in the Republic of Ireland: Study for six household types.

A Minimum Essential Standard of Living (MESL) is derived from a negotiated consensus on what people believe is a minimum standard. It is a standard of living that meets an individual’s or a household’s physical, psychological and social needs. This is calculated by identifying the goods and services required by different household types in order to meet their needs. While an MESL is based on needs, not wants, it is a standard of living below which nobody should be expected to live. This report focuses on food, one of the 16 elements of the Minimum Essential Standard of Living (MESL) data. It is based on a methodology called Consensual Budget Standards (CBS). The report is presented in the context of increasing concerns about the issue of food poverty in the Republic of Ireland (ROI) and an increase in the number of people reporting that they do not have enough money to buy food. Recent data from The Organisation for Economic Co-operation and Development (OECD) have shown that the number of people believing they cannot afford food doubled from 4.2% in 2008 to 9% in 2014. Data from Eurostat show that in 2013, food and non-alcoholic beverage prices in Ireland were 17% higher than the EU average. Moreover, research by Carney and Maitre, using data from the Survey on Income and Living Conditions (SILC), found that one in ten people are living in food poverty in Ireland. Food poverty is defined as the inability to have an adequate and nutritious diet due to issues of affordability and access to food. This has related effects on health, culture and social participation. The 2013 data from the Survey on Income and Living Conditions (SILC) show that 1.4 million people, almost 31% of the population, suffer from deprivation. This means that they are unable to afford two items from a list of 11 very basic items (of which one is not being able to eat a meal with meat, chicken, fish or a vegetarian equivalent every second day). The highest levels of deprivation are experienced by lone parents (63%), unemployed people (55%) and people not at work because of illness or disability (53%). The experience of the Vincentian Partnership for Social Justice (VPSJ) is that expenditure on food tends to be one of the least important considerations when households are dealing with competing demands on an inadequate income. A Minimum Essential Standard of Living (MESL) is derived from a negotiated consensus on what people believe is a minimum standard. It is a standard of living that meets an individual’s or a household’s physical, psychological and social needs. This is calculated by identifying the goods and services required by different household types in order to meet their needs. While an MESL is based on needs, not wants, it is a standard of living below which nobody should be expected to live. This report focuses on food, one of the 16 elements of the Minimum Essential Standard of Living (MESL) data. It is based on a methodology called Consensual Budget Standards (CBS). The report is presented in the context of increasing concerns about the issue of food poverty in the Republic of Ireland (ROI) and an increase in the number of people reporting that they do not have enough money to buy food. Recent data from The Organisation for Economic Co-operation and Development (OECD) have shown that the number of people believing they cannot afford food doubled from 4.2% in 2008 to 9% in 2014. Data from Eurostat show that in 2013, food and non-alcoholic beverage prices in Ireland were 17% higher than the EU average. Moreover, research by Carney and Maitre, using data from the Survey on Income and Living Conditions (SILC), found that one in ten people are living in food poverty in Ireland. Food poverty is defined as the inability to have an adequate and nutritious diet due to issues of affordability and access to food. This has related effects on health, culture and social participation. The 2013 data from the Survey on Income and Living Conditions (SILC) show that 1.4 million people, almost 31% of the population, suffer from deprivation. This means that they are unable to afford two items from a list of 11 very basic items (of which one is not being able to eat a meal with meat, chicken, fish or a vegetarian equivalent every second day). The highest levels of deprivation are experienced by lone parents (63%), unemployed people (55%) and people not at work because of illness or disability (53%). The experience of the Vincentian Partnership for Social Justice (VPSJ) is that expenditure on food tends to be one of the least important considerations when households are dealing with competing demands on an inadequate income. - See more at: http://www.safefood.eu/Publications/Research-reports/The-cost-of-a-healthy-food-basket.aspx#sthash.RiBpj5no.dpuf A Minimum Essential Standard of Living (MESL) is derived from a negotiated consensus on what people believe is a minimum standard. It is a standard of living that meets an individual’s or a household’s physical, psychological and social needs. This is calculated by identifying the goods and services required by different household types in order to meet their needs. While an MESL is based on needs, not wants, it is a standard of living below which nobody should be expected to live. This report focuses on food, one of the 16 elements of the Minimum Essential Standard of Living (MESL) data. It is based on a methodology called Consensual Budget Standards (CBS). The report is presented in the context of increasing concerns about the issue of food poverty in the Republic of Ireland (ROI) and an increase in the number of people reporting that they do not have enough money to buy food. Recent data from The Organisation for Economic Co-operation and Development (OECD) have shown that the number of people believing they cannot afford food doubled from 4.2% in 2008 to 9% in 2014. Data from Eurostat show that in 2013, food and non-alcoholic beverage prices in Ireland were 17% higher than the EU average. Moreover, research by Carney and Maitre, using data from the Survey on Income and Living Conditions (SILC), found that one in ten people are living in food poverty in Ireland. Food poverty is defined as the inability to have an adequate and nutritious diet due to issues of affordability and access to food. This has related effects on health, culture and social participation. The 2013 data from the Survey on Income and Living Conditions (SILC) show that 1.4 million people, almost 31% of the population, suffer from deprivation. This means that they are unable to afford two items from a list of 11 very basic items (of which one is not being able to eat a meal with meat, chicken, fish or a vegetarian equivalent every second day). The highest levels of deprivation are experienced by lone parents (63%), unemployed people (55%) and people not at work because of illness or disability (53%). The experience of the Vincentian Partnership for Social Justice (VPSJ) is that expenditure on food tends to be one of the least important considerations when households are dealing with competing demands on an inadequate income. - See more at: http://www.safefood.eu/Publications/Research-reports/The-cost-of-a-healthy-food-basket.aspx#sthash.RiBpj5no.dpuf A Minimum Essential Standard of Living (MESL) is derived from a negotiated consensus on what people believe is a minimum standard. It is a standard of living that meets an individual’s or a household’s physical, psychological and social needs. This is calculated by identifying the goods and services required by different household types in order to meet their needs. While an MESL is based on needs, not wants, it is a standard of living below which nobody should be expected to live. This report focuses on food, one of the 16 elements of the Minimum Essential Standard of Living (MESL) data. It is based on a methodology called Consensual Budget Standards (CBS). The report is presented in the context of increasing concerns about the issue of food poverty in the Republic of Ireland (ROI) and an increase in the number of people reporting that they do not have enough money to buy food. Recent data from The Organisation for Economic Co-operation and Development (OECD) have shown that the number of people believing they cannot afford food doubled from 4.2% in 2008 to 9% in 2014. Data from Eurostat show that in 2013, food and non-alcoholic beverage prices in Ireland were 17% higher than the EU average. Moreover, research by Carney and Maitre, using data from the Survey on Income and Living Conditions (SILC), found that one in ten people are living in food poverty in Ireland. Food poverty is defined as the inability to have an adequate and nutritious diet due to issues of affordability and access to food. This has related effects on health, culture and social participation. The 2013 data from the Survey on Income and Living Conditions (SILC) show that 1.4 million people, almost 31% of the population, suffer from deprivation. This means that they are unable to afford two items from a list of 11 very basic items (of which one is not being able to eat a meal with meat, chicken, fish or a vegetarian equivalent every second day). The highest levels of deprivation are experienced by lone parents (63%), unemployed people (55%) and people not at work because of illness or disability (53%). The experience of the Vincentian Partnership for Social Justice (VPSJ) is that expenditure on food tends to be one of the least important considerations when households are dealing with competing demands on an inadequate income. - See more at: http://www.safefood.eu/Publications/Research-reports/The-cost-of-a-healthy-food-basket.aspx#sthash.RiBpj5no.dpuf

A cost-efficiency and health benefit approach to improve urban air quality

When ambient air quality standards established in the EU Directive 2008/50/EC are exceeded, Member States are obliged to develop and implement Air Quality Plans (AQP) to improve air quality and health. Notwithstanding the achievements in emission reductions and air quality improvement, additional efforts need to be undertaken to improve air quality in a sustainable way - i.e. through a cost-efficiency approach. This work was developed in the scope of the recently concluded MAPLIA project "Moving from Air Pollution to Local Integrated Assessment", and focuses on the definition and assessment of emission abatement measures and their associated costs, air quality and health impacts and benefits by means of air quality modelling tools, health impact functions and cost-efficiency analysis. The MAPLIA system was applied to the Grande Porto urban area (Portugal), addressing PM10 and NOx as the most important pollutants in the region. Four different measures to reduce PM10 and NOx emissions were defined and characterized in terms of emissions and implementation costs, and combined into 15 emission scenarios, simulated by the TAPM air quality modelling tool. Air pollutant concentration fields were then used to estimate health benefits in terms of avoided costs (external costs), using dose-response health impact functions. Results revealed that, among the 15 scenarios analysed, the scenario including all 4 measures lead to a total net benefit of 0.3M€·y(-1). The largest net benefit is obtained for the scenario considering the conversion of 50% of open fire places into heat recovery wood stoves. Although the implementation costs of this measure are high, the benefits outweigh the costs. Research outcomes confirm that the MAPLIA system is useful for policy decision support on air quality improvement strategies, and could be applied to other urban areas where AQP need to be implemented and monitored.

Impact of cost sharing on utilization of primary health care Services: providers versus household perspectives

This study is set to match and compare results of the analysis of impacts of cost sharing on households with those on health-care providers in two selected districts in Tanzania. The setting is intended to establish and compare concurrently the impact of cost sharing on health-care utilization as viewed from both the providers and beneficiary households. The findings of the study indicate that quality of primary health care has improved as a result of the introduction of cost sharing. Attendance and hence utilization in health facilities has also increased. Mortality rate, at least for one district has not worsened. By implication then, cost sharing appears to have a positive impact on the provision of primary health care, except for a few cases that fail to consult because of the fees. An appropriately managed exemption facility is likely to eliminate the negative impact.

Haemophilus influenzae clinical isolates with plasmid pB1000 bearing blaROB-1: fitness cost and interspecies dissemination

Plasmid pB1000 is a mobilizable replicon bearing the bla(ROB-1) beta-lactamase gene that we have recently described in Haemophilus parasuis and Pasteurella multocida animal isolates. Here we report the presence of pB1000 and a derivative plasmid, pB1000', in four Haemophilus influenzae clinical isolates of human origin. Pulsed-field gel electrophoresis showed unrelated patterns in all strains, indicating that the existence of pB1000 in H. influenzae isolates is not the consequence of clonal dissemination. The replicon can be transferred both by transformation and by conjugation into H. influenzae, giving rise to recipients resistant to ampicillin and cefaclor (MICs, > or =64 microg/ml). Stability experiments showed that pB1000 is stable in H. influenzae without antimicrobial pressure for at least 60 generations. Competition experiments between isogenic H. influenzae strains with and without pB1000 revealed a competitive disadvantage of 9% per 10 generations for the transformant versus the recipient. The complete nucleotide sequences of nine pB1000 plasmids from human and animal isolates, as well as the epidemiological data, suggest that animal isolates belonging to the Pasteurellaceae act as an antimicrobial resistance reservoir for H. influenzae. Further, since P. multocida is the only member of this family that can colonize both humans and animals, we propose that P. multocida is the vehicle for the transport of pB1000 between animal- and human-adapted members of the Pasteurellaceae.

On the Cost of Using Happy Eyeballs for Transport Protocol Selection

Concerns have been raised in the past several years that introducing new transport protocols on the Internet has be- come increasingly difficult, not least because there is no agreed-upon way for a source end host to find out if a trans- port protocol is supported all the way to a destination peer. A solution to a similar problem—finding out support for IPv6—has been proposed and is currently being deployed: the Happy Eyeballs (HE) mechanism. HE has also been proposed as an efficient way for an application to select an appropriate transport protocol. Still, there are few, if any, performance evaluations of transport HE. This paper demonstrates that transport HE could indeed be a feasible solution to the transport support problem. The paper evaluates HE between TCP and SCTP using TLS encrypted and unencrypted traffic, and shows that although there is indeed a cost in terms of CPU load to introduce HE, the cost is rel- atively small, especially in comparison with the cost of using TLS encryption. Moreover, our results suggest that HE has a marginal impact on memory usage. Finally, by introduc- ing caching of previous connection attempts, the additional cost of transport HE could be significantly reduced. 

A finite-strain solid–shell using local Löwdin frames and least-squares strains

A finite-strain solid–shell element is proposed. It is based on least-squares in-plane assumed strains, assumed natural transverse shear and normal strains. The singular value decomposition (SVD) is used to define local (integration-point) orthogonal frames-of-reference solely from the Jacobian matrix. The complete finite-strain formulation is derived and tested. Assumed strains obtained from least-squares fitting are an alternative to the enhanced-assumed-strain (EAS) formulations and, in contrast with these, the result is an element satisfying the Patch test. There are no additional degrees-of-freedom, as it is the case with the enhanced-assumed-strain case, even by means of static condensation. Least-squares fitting produces invariant finite strain elements which are shear-locking free and amenable to be incorporated in large-scale codes. With that goal, we use automatically generated code produced by AceGen and Mathematica. All benchmarks show excellent results, similar to the best available shell and hybrid solid elements with significantly lower computational cost.

A finite-strain solid–shell using local Löwdin frames and least-squares strains

A finite-strain solid–shell element is proposed. It is based on least-squares in-plane assumed strains, assumed natural transverse shear and normal strains. The singular value decomposition (SVD) is used to define local (integration-point) orthogonal frames-of- reference solely from the Jacobian matrix. The complete finite-strain formulation is derived and tested. Assumed strains obtained from least-squares fitting are an alternative to the enhanced-assumed-strain (EAS) formulations and, in contrast with these, the result is an element satisfying the Patch test. There are no additional degrees-of-freedom, as it is the case with the enhanced- assumed-strain case, even by means of static condensation. Least-squares fitting produces invariant finite strain elements which are shear-locking free and amenable to be incorporated in large-scale codes. With that goal, we use automatically generated code produced by AceGen and Mathematica. All benchmarks show excellent results, similar to the best available shell and hybrid solid elements with significantly lower computational cost.