Pollution generation in the Carajas region of Brazil: An extended input -output approach

The economic development of any region involves some consequences to the environment. The choice of a socially optimal development plan must consider a measure of the strategy's environmental impact. This dissertation tackles this problem by examining environmental impacts of new production activities. The study uses the experience of the Carajás region in the north of Brazil. This region, which prior to the 1960's was an isolated outpost of the Amazon area, was integrated to the rest of the country with a non-sophisticated but strategic road system and eventually became the second largest iron ore mining area in the world. Finally, in the 1980's, the area was linked, by way of a railroad, to the nearest seaport along the Atlantic Ocean. The consequence of such changes was a burst of economic growth along the railroad Corridor and neighboring areas. In this work, a Social Accounting Matrix (SAM) is used to construct a 2-region (Corridor and surrounding area), fixed price, Computable General Equilibrium (CGE) Model to examine the relationship between production and pollution by measuring the different pollution effects of alternative growth strategies. SAMs are a very useful tool to examine the environmental impacts of development by linking production activities to measurable indices of natural resource degradation. The simulation results suggest that the strategies leading to faster economic growth in the short run are also those that lead to faster rates of environmental degradation. The simulations also show that the strategies that leads to faster rates of short run growth do so at the price of a rate of environmental depletion that is unsustainable from a long run perspective. These results, therefore, support the concern expressed by environmental economists and policy makers regarding the possible trade-offs between economic growth and environmental preservation. This stresses the need for a careful analysis of the environmental impacts of alternative growth strategies. ^

On the accuracy of nonsurvey regional input-output multipliers : An empirical study

Correct specification of the simple location quotients in regionalizing the national direct requirements table is essential to the accuracy of regional input-output multipliers. The purpose of this research is to examine the relative accuracy of these multipliers when earnings, employment, number of establishments, and payroll data specify the simple location quotients. For each specification type, I derive a column of total output multipliers and a column of total income multipliers. These multipliers are based on the 1987 benchmark input-output accounts of the U.S. economy and 1988-1992 state of Florida data. Error sign tests, and Standardized Mean Absolute Deviation (SMAD) statistics indicate that the output multiplier estimates overestimate the output multipliers published by the Department of Commerce-Bureau of Economic Analysis (BEA) for the state of Florida. In contrast, the income multiplier estimates underestimate the BEA's income multipliers. For a given multiplier type, the Spearman-rank correlation analysis shows that the multiplier estimates and the BEA multipliers have statistically different rank ordering of row elements. The above tests also find no significant different differences, both in size and ranking distributions, among the vectors of multiplier estimates.

Análisis input-output de encadenamientos productivos y sectores clave en la economía mexicana

Este artículo busca identificar las industrias clave de la economía mexicana. Para este propósito, se aplican las siguientes metodologías basadas en el análisis input-output: a) el método Chenery-Watabane (1958) para el cálculo de encadenamientos productivos directos; b) el método Rasmussen (1963) para el cálculo de encadenamientos productivos totales; c) el enfoque de demanda de Leontief (1985) para cuantificar los encadenamientos hacia atrás directos y totales; d) el enfoque de oferta de Ghosh (1958, 1968) para la cuantificación de los encadenamientos hacia delante directos y totales. Finalmente, los resultados de estas aplicaciones muestran que los sectores clave de México son las industrias de bienes intermedios y bienes de capital.

Matriz Input-Output da região Alentejo: Acerca da Distribuição de Rendimento (3º quadrante)

No número 18 do “Boletim Trimestral” apresentámos os principais resultados do estudo que elaborou a Matriz Input-Output da Região Alentejo (MIO-Alentejo). Com este texto prosseguimos o propósito de divulgação dos resultados e conclusões do projeto, mas adotando agora uma perspectiva mais focalizada. Em particular, interessa-nos de momento olhar para o processo de formação do valor acrescentado, ou, de forma equivalente, para a distribuição do rendimento gerado na produção, sob a forma de remuneração dos diferentes fatores produtivos (3º quadrante). Nos pontos 2, 3, e 4 apresentamos os resultados e, em conclusão, deixamos algumas considerações finais no ponto 5. Anexamos um glossário com uma breve descrição metodológica.

Demand and supply oriented input-output models: a linkage analysis for Portugal.

Doutoramento em Economia.

Linear functional observers with guaranteed ε-convergence for discrete time-delay systems with input/output disturbances

The problem of designing linear functional observers for discrete time-delay systems with unknown-but-bounded disturbances in both the plant and the output is considered for the first time in this paper. A novel approach to design a minimum-order observer is proposed to guarantee that the observer error is ϵ-convergent, which means that the estimate converges robustly within an ϵ-bound of the true state. Conditions for the existence of this observer are first derived. Then, by utilising an extended Lyapunov-Krasovskii functional and the free-weighting matrix technique, a sufficient condition for ϵ-convergence of the observer error system is given. This condition is presented in terms of linear matrix inequalities with two parameters needed to be tuned, so that it can be efficiently solved by incorporating a two-dimensional search method into convex optimisation algorithms to obtain the smallest possible value for ϵ. Three numerical examples, including the well-known single-link flexible joint robotic system, are given to illustrate the feasibility and effectiveness of our results.

Measuring output structures of multinational construction industries using the World Input‒Output Database

In the context of international movement towards trade liberalization, increasing technological progress, open competition and social development have impacted deeply on the construction industry in all economies. Using the World Input–Output Database (WIOD), a multinational comparison of the construction industry is estimated from 1995 to 2011 to provide accurate and valid information on the changing patterns of its output structure. The output coefficients for 37 countries and regions are formulated to allow for inter-industry comparisons and to identify the major components of construction output. Changes of output structure are then elaborated over time across countries and regions. The research findings presented in this paper would provide a framework for identifying the output structure of a nation's construction industry and its change trends at an international level, which may help policymakers and enterprises with the formulation of their future development strategies.

The Transformation Problem : an Aleternative Solution with an Identical Aggregate Profit Rate in the Labor value and the Monetary Space.

The aim of this paper is to demonstrate that, even if Marx's solution to the transformation problem can be modified, his basic conclusions remain valid. the proposed alternative solution which is presented hare is based on the constraint of a common general profit rate in both spaces and a money wage level which will be determined simultaneously with prices.

The Wage Rate and the Profit Rate in the Price of Production Equation: a New Solution to an Old Problem

The aim of this paper is to demonstrate that, even if Marx's solution to the transformation problem can be modified, his basic concusions remain valid.

The Transformation Problem : an Aleternative Solution with an Identical Aggregate Profit Rate in the Labor value and the Monetary Space.

The aim of this paper is to demonstrate that, even if Marx's solution to the transformation problem can be modified, his basic conclusions remain valid. the proposed alternative solution which is presented hare is based on the constraint of a common general profit rate in both spaces and a money wage level which will be determined simultaneously with prices.

Macroemesures in Computable General Equilibrium Models: a Probabilistic Treatment with an Application to Morocco.

With the help of an illustrative general equilibrium (CGE) model of the Moroccan Economy, we test for the significance of simulation results in the case where the exact macromesure is not known with certainty. This is done by computing lower and upper bounds for the simulation resukts, given a priori probabilities attached to three possible closures (Classical, Johansen, Keynesian). Our Conclusion is that, when there is uncertainty on closures several endogenous changes lack significance, which, in turn, limit the use of the model for policy prescriptions.

How Prescribed Policy Can Mislead when Data Are Defective: a Follow-Up to Srinivasan (1994) Using General Equilibrium.

We highlight an example of considerable bias in officially published input-output data (factor-income shares) by an LDC (Turkey), which many researchers use without question. We make use of an intertemporal general equilibrium model of trade and production to evaluate the dynamic gains for Turkey from currently debated trade policy options and compare the predictions using conservatively adjusted, rather than official, data on factor shares.

Can we really trust offshoring indices?

This paper argues that offshoring indices often measure something different than what we think they are. Using data from input-output tables of 21 European countries from 1995 to 2006 we decompose an offshoring index, distinguishing between a domestic (structural change) and an international component (imported inputs ratio). Regarding offshoring of business services, a large share of the index variation is driven by the domestic component. This is even more pronounced for overall service offshoring. In the case of material offshoring, by contrast, the international component drives the main variation of the indices. Our results therefore show that, regarding (business) services, the typical calculation of offshoring indices tends to over estimate the role of the imported inputs component, neglecting the role played by structural changes in the economy.

Global factor trade with differentiated factor prices and factor intensities

Relaxing the assumption of internationally identical factor intensity techniques in the HOV model creates two challenges. First, computing actual factor intensity techniques of different countries requires detailed input-output tables and factor usage data, which are not always available. Second, determinants of the factor intensity technique differences across countries need to be identified. This paper explores the role of relative factor price differences in the determination of factor intensity technique differences across countries and proposes an inferring method that infers factor intensity techniques of different countries based on relative factor price differences. The HOV model is then modified accordingly.

Commerce mondial des facteurs de production quand les prix des facteurs sont différenciés et les intensités dans l'intensité d'utilisation des facteurs différentes. Relaxer le postulat de techniques à intensité identique de facteurs de production d'un pays à l'autre dans un modèle Heckscher-Ohlin-Vanek (HOV) pose deux défis. D'abord, mesurer les intensités en facteurs des techniques en place dans les divers pays réclame des tableaux interindustriels détaillés et des données sur l'utilisation des facteurs qui ne sont pas toujours disponibles. Ensuite, il faut identifier les déterminants des différences d'intensités en facteurs des techniques d'un pays à l'autre. Ce mémoire explore le rôle des différences dans les prix relatifs des facteurs dans la détermination des différences d'intensité en facteurs d'un pays à l'autre, et propose une méthode qui permet d'inférer les différences d'intensité en facteurs des techniques des divers pays à partir des différences dans les prix relatifs des facteurs. Le modèle HOV est alors modifié en conséquence.

Extending construction linkage measures by the consideration of the impact of capital

Construction linkage is a well-established research field. However, a significant limitation in previous linkage research is that the flow of capital goods is not addressed. Using the OECD input-output tables, this research first generates a new input-output model considering capital as an intermediate factor. Using the new model, the construction linkages are recalculated and investigated in order to evaluate further the role of construction in national economies. The findings verify that traditional construction linkages were extremely underestimated in previous research. Furthermore, the effect of capital on construction shows a declining trend over the examined period. After considering the effect of capital, most values and rankings of backward and forward linkages show a decreasing trend, which confirms the declining role of the construction sector with economic maturity.