PIC mode simulation of solenoid collimation channel

A new SSC (Separated Sector Cyclotron)-Linac is being designed to serve as an injector for the SSC at the HIRFL (Heavy Ion Research Facility Lanzhou). The beam intensity at the LEBT (Low Energy Beam Transport) for the heavy ions after the selection is typically low and the space charge effects are inconspicuous. The space charge effects become obvious when the beam current increases to a few hundred microamperes. The emittance growth deriving from the space charge effects may be particularly troublesome for the following linac and cyclotron. An optical system containing three solenoids has been designed for the LEBT to limit the beam emittance and to avoid the unnecessary beam loss in the cyclotron, as well as for the purpose of immunizing the LEBT emittance growth due to the space charge effects. The results of the PIG (Particle-In-Cell) mode simulation illustrate that this channel could limit the beam emittance growth and increase the beam brightness.

The design of curved optical waveguides : analytical and numerical analysis

A model for understanding the formation and propagation of modes in curved optical waveguides is developed. A numerical method for the calculation of curved waveguide mode profiles and propagation constants in two dimensional waveguides is developed, implemented and tested. A numerical method for the analysis of propagation of modes in three dimensional curved optical waveguides is developed, implemented and tested. A technique for the design of curved waveguides with reduced transition loss is presented. A scheme for drawing these new waveguides and ensuring that they have constant width is also provided. Claims about the waveguide design technique are substantiated through numerical simulations.

Facet-embedded thin-film III-V edge-emitting lasers integrated with SU-8 waveguides on silicon.

A thin-film InGaAs/GaAs edge-emitting single-quantum-well laser has been integrated with a tapered multimode SU-8 waveguide onto an Si substrate. The SU-8 waveguide is passively aligned to the laser using mask-based photolithography, mimicking electrical interconnection in Si complementary metal-oxide semiconductor, and overlaps one facet of the thin-film laser for coupling power from the laser to the waveguide. Injected threshold current densities of 260A/cm(2) are measured with the reduced reflectivity of the embedded laser facet while improving single mode coupling efficiency, which is theoretically simulated to be 77%.

Guided waves in a fluid-loaded transversely isotropic place

Dispersion relations are obtained for the propagation of symmetric and antisymmetric modes in a free transversely isotropic plate. Dispersion curves are plotted for the first four symmetric modes for a magnesium plate immersed in water. The first mode is highly damped and switches over to the second mode when the normalized frequency exceeds 12.

Quasi-phasematching of harmonic generation via multimode beating in waveguides

A new scheme for quasi-phasematching high harmonic generation (HHG) in gases is proposed. In this, the rapid variation of the axial intensity resulting from excitation of more than one mode of a waveguide is used to achieve quasi phasematching. Numerical modeling demonstrates enhancement of the harmonic signal over that achieved for a single coherence length by factors > 10(4). (C) 2007 Optical Society of America

OPTIMIZATION OF THE SLOW-MODE PLASMON POLARITON IN LIGHT-EMITTING TUNNEL-JUNCTIONS

Light emitted from metal/oxide/metal tunnel junctions can originate from the slow-mode surface plasmon polariton supported in the oxide interface region. The effective radiative decay of this mode is constrained by competition with heavy intrinsic damping and by the need to scatter from very small scale surface roughness; the latter requirement arises from the mode's low phase velocity and the usual momentum conservation condition in the scattering process. Computational analysis of conventional devices shows that the desirable goals of decreased intrinsic damping and increased phase velocity are influenced, in order of priority, by the thickness and dielectric function of the oxide layer, the type of metal chosen for each conducting electrode, and temperature. Realizable devices supporting an optimized slow-mode plasmon polariton are suggested. Essentially these consist of thin metal electrodes separated by a dielectric layer which acts as a very thin (a few nm) electron tunneling barrier but a relatively thick (several 10's of nm) optically lossless region. (C) 1995 American Institute of Physics.

Dipolar emission in trench metal-insulator-metal waveguides for short-scale plasmonic communications: numerical optimization

Here we consider the numerical optimization of active surface plasmon polariton (SPP) trench waveguides suited for integration with luminescent polymers for use as highly localized SPP source devices in short-scale communication integrated circuits. The numerical analysis of the SPP modes within trench waveguide systems provides detailed information on the mode field components, effective indices, propagation lengths and mode areas. Such trench waveguide systems offer extremely high confinement with propagation on length scales appropriate to local interconnects, along with high efficiency coupling of dipolar emitters to waveguided plasmonic modes which can be close to 80%. The large Purcell factor exhibited in these structures will further lead to faster modulation capabilities along with an increased quantum yield beneficial for the proposed plasmon-emitting diode, a plasmonic analog of the light-emitting diode. The confinement of studied guided modes is on the order of 50 nm and the delay over the shorter 5 μm length scales will be on the order of 0.1 ps for the slowest propagating modes of the system, and significantly less for the faster modes.

Mode de vie, habitudes alimentaires et cancer du sein: Étude cas-témoins chez les Canadiennes-françaises non porteuses de mutations des gènes BRCA

Le cancer du sein (CS) est la deuxième cause de décès liés au cancer parmi les femmes dans la plupart des pays industrialisés. Les personnes qui ont le CS peuvent ne pas hériter des mutations causant le cancer de leurs parents. Ainsi, certaines cellules subissent des mutations qui mènent au cancer. Dans le cas de cancer héréditaire, les cellules tumorales contiennent généralement des mutations qui ne sont pas trouvées ailleurs dans l'organisme, mais peuvent maintenir des mutations qui vont répartir dans toutes les cellules. La genèse du CS est le résultat des mutations de gènes qui assurent la régulation de la prolifération cellulaire et la réparation de l’ADN. Deux gènes semblent particulièrement concernés par les mutations. Les gènes ‘Breast Cancer 1’ (BRCA1) et ‘Breast Cancer 2’ (BRCA2), sont impliqués dans la prédisposition génétique de CS. On estime que 5-10% des cas de cancer du sein sont attribuables à une prédisposition génétique. La plupart de ces cancers sont liés à une anomalie du gène BRCA1 ou BRCA2. Plusieurs études ont été menées chez les femmes atteintes de CS sporadique et quelques études se sont concentrées sur celles qui sont porteuses de mutations de BRCA. Alors, notre recherche a été entreprise afin de vérifier l’hypothèse d’une association entre le CS, le mode vie et les habitudes alimentaires chez les Canadiennes-françaises non porteuses des 6 mutations de BRCA les plus fréquentes parmi cette population. Nous avons mené une étude cas-témoins dans cette population. Quelque 280 femmes atteintes du cancer du sein et non-porteuses de mutations de BRCA, ont été recrutées en tant que cas. Les témoins étaient recrutés parmi les membres de la famille des cas (n=15) ou à partir d'autres familles atteintes de CS (n=265). Les participantes étaient de tous âges, recrutées à partir d’une étude de cohorte qui est actuellement en cours, menée par une équipe de chercheurs au Centre Hospitalier Universitaire de Montréal (CHUM) Hôtel-Dieu à Montréal. Les apports alimentaires ont été recueillis par un questionnaire de fréquence semi-quantitatif validé et administré par une nutritionniste, qui portait sur la période avant les deux ans précédant le premier diagnostic de CS pour les cas et la période avant les deux ans précédant l’entrevue téléphonique pour les témoins. Un questionnaire de base était administré par l’infirmière de recherche aux participantes afin de colliger des renseignements sociodémographiques et sur les facteurs de risque du CS. Une association positive et significative a été détectée entre l’âge (plus de 50 ans) auquel les sujets avaient atteint leur Indice de Masse Corporel (IMC) le plus élevé et le CS rapport de cotes (OR) =2,83; intervalle de confiance à 95% (IC95%) (2,34-2,91). De plus, une association positive a été détectée entre un gain de poids de >34 lbs comparativement à un gain de poids de ≤15 lbs, dès l’âge de 20 ans OR=1,68; IC95% (1,10-2,58). Un gain de poids de >24 lbs comparativement à un gain de poids de ≤9 lbs, dès l’âge de 30 ans a aussi montré une augmentation de risque de CS OR=1,96; IC95% (1,46-3,06). Une association positive a aussi été détecté entre, un gain de poids de >12 lbs comparativement à un gain de poids de ≤1 lb, dès l’âge de 40 ans OR=1,91; IC95% (1,53-2,66). Concernant le tabagisme, nous avons observé une association positive et significative reliée à la consommation de plus de 9 paquets-années OR = 1,59; IC95% (1,57-2,87). Il fut suggéré que l’activité physique modéré confère une protection contre le CS: une pratique de > 24,8 (‘metabolic equivalent’) MET-hrs par semaine par rapport à ≤10,7 MET-hrs par semaine, diminue le risque du CS de 52% OR = 0,48 ; IC95% (0,31-0,74). L’activité physique totale (entre 16,2 et 33,2 MET-hrs par semaine), a aussi montré une réduction de risque de CS de 43% OR = 0,57 ; IC95% (0,37-0,87). Toutefois, il n'y avait aucune association entre une activité physique vigoureuse et le risque de CS. L’analyse portant sur les macro- et micro-nutriments et les groupes alimentaires a montré qu’un apport en énergie totale de plus de 2057 Kcal par jour augmentait le risque de CS de 2,5 fois OR = 2,54; IC95% (1,67-3,84). En ce qui concerne la consommation de café, les participantes qui buvaient plus de 8 tasses de café par jour avaient un risque de CS augmenté de 40% OR = 1,40; IC95% (1,09-2,24). Les sujets ayant une consommation dépassant 9 g d’alcool (éthanol) par jour avaient également un risque élevé de 55% OR = 1,55; IC95% (1,02-2,37). De plus, une association positive et significative a été détectée entre le CS et la consommation de plus de deux bouteilles de bière par semaine OR = 1,34; IC95% (1,28-2,11), 10 onces de vin par semaine OR = 1,16; IC95% (1,08-2,58) ou 6 onces de spiritueux par semaine OR = 1,09; IC95% (1,02-2,08), respectivement. En résumé, les résultats de cette recherche supportent l’hypothèse selon laquelle le mode de vie et les habitudes alimentaires jouent un rôle important dans l’étiologie de CS chez les Canadiennes-françaises non porteuses de mutations de BRCA. Les résultats nous permettent de constater que le gain de poids et le tabagisme sont liés à des risques élevés de CS, tandis que l'activité physique modérée aide à réduire ce risque. De plus, nos résultats suggèrent qu’un apport énergétique total relativement élevé et une consommation élevée de café et d'alcool peuvent accroître le risque de ce cancer. Ce travail a permis de mettre l’accent sur une nouvelle direction de recherche, jusqu'à présent non investiguée. Les résultats de ce travail de recherche pourraient contribuer à recueillir de nouvelles informations et des conseils pouvant influencer et aider la population à modifier son mode de vie et ses habitudes alimentaires afin de diminuer le risque de cancer du sein.

An analytical study of the power distribution pattterns of silica waveguides with high paraboloic cylindrical deformation

An attempt is made to determine the relative power distribution in a step-index parabolic cylindrical waveguide (PCW) with high deformation across the direction of propagation. The guide is assumed to be made of silica. The scalar field approximation is employed for the analysis under which a vanishing refractive-index (RI) difference in the waveguide materials is considered. Further, no approximation for folds- is used in the analytical treatment. Due to the geometry of such waceguides, PCWs lose the well-defined modal discreteness, and a kind of mode bunching is observed instead, which becomes much more prominent in PCWs with high bends. However, with the increase in cross-sectional size, the mode-bunching tendency is slightly reduced. The general expressions for power in the guiding and nonguiding sections are obtained, and the fractional power patterns in all of the sections are presented for PCWs of various cross-sectional dimensions. It is observed that the confinement of power in the core section is increased for PCWs of larger cross-sectional size. Moreover, a fairly uniform distribution of power is seen over the modes having intermediate values of propagation constants

Investigation of the fracture mode for hard and soft wheat endosperm using the loading-unloading bending test

Investigation of the fracture mode for hard and soft wheat endosperm was aimed at gaining a better understanding of the fragmentation process. Fracture mechanical characterization was based on the three-point bending test which enables stable crack propagation to take place in small rectangular pieces of wheat endosperm. The crack length can be measured in situ by using an optical microscope with light illumination from the side of the specimen or from the back of the specimen. Two new techniques were developed and used to estimate the fracture toughness of wheat endosperm, a geometric approach and a compliance method. The geometric approach gave average fracture toughness values of 53.10 and 27.0 J m(-2) for hard and soft endosperm, respectively. Fracture toughness estimated using the compliance method gave values of 49.9 and 29.7 J m(-2) for hard and soft endosperm, respectively. Compressive properties of the endosperm in three mutually perpendicular axes revealed that the hard and soft endosperms are isotropic composites. Scanning electron microscopy (SEM) observation of the fracture surfaces and the energy-time curves of loading-unloading cycles revealed that there was a plastic flow during crack propagation for both the hard and soft endosperms, and confirmed that the fracture mode is significantly related to the adhesion level between starch granules and the protein matrix.

Evidence for the chaotic origin of Northern Annular Mode variability

Exponential spectra are found to characterize variability of the Northern Annular Mode (NAM) for periods less than 36 days. This corresponds to the observed rounding of the autocorrelation function at lags of a few days. The characteristic persistence timescales during winter and summer is found to be ∼5 days for these high frequencies. Beyond periods of 36 days the characteristic decorrelation timescale is ∼20 days during winter and ∼6 days in summer. We conclude that the NAM cannot be described by autoregressive models for high frequencies; the spectra are more consistent with low-order chaos. We also propose that the NAM exhibits regime behaviour, however the nature of this has yet to be identified.

A single director switching mode for monodomain liquid crystal elastomer

We report rotation of a single director in a nematic monodomain, acrylate based side-chain elastomer which was subjected to mechanical fields applied at angles in the range to the director, , present at the time of network formation. Time and spatially resolving wide angle X-ray scattering, together with polarised light microscopy measurements revealed a pronounced, almost discontinuous switching mode at a critical extension as the strain was applied at angles approaching to , whereas a more continuous rotation was seen when the strain was applied at more acute angles. This director reorientation was more or less uniform across the complete sample and was accompanied by a modest decrease in orientation parameter . At strains sufficient to induce switching there was some continuous distribution of director orientations with fluctuations of 10 although there was no evidence for any localised director inhomogenities such as domain formation. The observed deformation behaviour of these acrylate-based nematic monodomains was in accord with the predictions of a theory developed by Bladon et al., in that the complete set of data could be accounted for through a single parameter describing the chain anisotropy. The experimentally deduced chain anisotropy parameter was in broad agreement with that obtained from small-angle neutron scattering procedures, but was somewhat greater than that obtained by spontaneous shape changes at the nematic-isotropic transition.

Stratospheric variability and tropospheric annular‐mode timescales

Climate models tend to exhibit much too persistent Southern Annular Mode (SAM) circulation anomalies in summer, compared to observations. Theoretical arguments suggest this bias may lead to an overly strong model response to anthropogenic forcing during this season, which is of interest since the largest observed changes in Southern Hemisphere high‐latitude climate over the last few decades have occurred in summer, and are congruent with the SAM. The origin of this model bias is examined here in the case of the Canadian Middle Atmosphere Model, using a novel technique to quantify the influence of stratospheric variability on tropospheric annular‐mode timescales. Part of the model bias is shown to be attributable to the too‐late breakdown of the stratospheric polar vortex, which allows the tropospheric influence of stratospheric variability to extend into early summer. However, the analysis also reveals an enhanced summertime persistence of the model’s SAM that is unrelated to either stratospheric variability or the bias in model stratospheric climatology, and is thus of tropospheric origin. No such feature is evident in the Northern Hemisphere. The effect of stratospheric variability in lengthening tropospheric annular‐mode timescales is evident in both hemispheres. While in the Southern Hemisphere the effect is restricted to late‐spring/early summer, in the Northern Hemisphere it can occur throughout the winter‐spring season, with the seasonality of peak timescales exhibiting considerable variability between different 50 year sections of the same simulation.

Whistler mode wave growth and propagation in the prenoon magnetosphere

Pitch-angle scattering of electrons can limit the stably trapped particle flux in the magnetosphere and precipitate energetic electrons into the ionosphere. Whistler-mode waves generated by a temperature anisotropy can mediate this pitch-angle scattering over a wide range of radial distances and latitudes, but in order to correctly predict the phase-space diffusion, it is important to characterise the whistler-mode wave distributions that result from the instability. We use previously-published observations of number density, pitch-angle anisotropy and phase space density to model the plasma in the quiet pre-noon magnetosphere (defined as periods when AE<100nT). We investigate the global propagation and growth of whistler-mode waves by studying millions of growing ray paths and demonstrate that the wave distribution at any one location is a superposition of many waves at different points along their trajectories and with different histories. We show that for observed electron plasma properties, very few raypaths undergo magnetospheric reflection, most rays grow and decay within 30 degrees of the magnetic equator. The frequency range of the wave distribution at large L can be adequately described by the solutions of the local dispersion relation, but the range of wavenormal angle is different. The wave distribution is asymmetric with respect to the wavenormal angle. The numerical results suggest that it is important to determine the variation of magnetospheric parameters as a function of latitude, as well as local time and L-shell.

Hydrocoryne iemanja (Cnidaria), a new species of Hydrozoa with unusual mode of asexual reproduction

Hydrocoryne iemanja sp. nov. was found in an aquarium, growing on rhodoliths of coralline algae collected on the southeastern coast of Brazil (20 degrees 40`S 40 degrees 2`W). The colonies were reared through maturity in the laboratory. Each colony had up to 7 sessile, long and thin monomorphic zooids, very extensible and flexible, arising from a chitinous, hard dark-brown plate with minute spines. Medusae budded from near the basal part of hydrocaulus, and were released in immature condition, acquiring fully developed interradial gonads 5-7 days after release. Asexual reproduction by longitudinal fission was observed on the hydrocaulus of the polyps, both for those in normal condition and those with injuries. Fission started at the oral region, extending aborally, with a new hard plate formed in the basal part of hydrocaulus. When fission reached the new hard plate, the new polyp detached, becoming free and sinking to the bottom, starting a new colony. Detached polyps were morphologically indistinguishable from other polyps, being able to produce medusae. Mother and daughter polyps undertook subsequent fissions. This mode of longitudinal fission is distinct from other modes of longitudinal fission, a process known for a few species Of cnidarians. Further studies of this process may shed light on the understanding of the evolutionary pathways in Cnidaria and animals. Hydrocoryne iemanja sp. nov. is distinguishable from its two congeners by the distinct marginal tentacles of the medusae-short and with a median nematocyst knob-an unambiguous character useful even for the identification Of newly liberated medusae.