Characterization of phase transformation behaviour and microstructural development of electroless Ni-B coating

Phase transformation behaviour of amorphous electroless Ni-B coating with a targeted composition of Ni-6wt% B is characterized in conjunction with microstructural development and hardness. Microscopic observations of the as-deposited coating display a novel microstructure which is already phase separated at multiple length scales. Spherical colonies of similar to 5 mu m consist of 2-3 mu m nodular regions which are surrounded by similar to 2-3 mu m region that contains fine bands ranging from 10 to 70 nm in width. The appearance of three crystalline phases in this binary system at different stages of heat treatment and the concomitant variation in hardness are shown to arise from nanoscale fluctuations in the as-deposited boron content from 4 to 8 wt%. High temperature annealing reveals continuous crystallization up to 430 degrees C, overlapping with the domain of B loss due to diffusion into the substrate. The implications of such a microstructure for optimal heat treatment procedures are discussed. (C) 2011 Elsevier B.V. All rights reserved.

Stress and texture development during sputtering of yttria, zirconia, and yttria stabilized zirconia films on Si substrates

Understanding and controlling growth stress is a requisite for integrating oxides with Si. Yttria stabilized zirconia (YSZ) is both an important functional oxide and a buffer layer material needed for integrating other functional oxides. Stress evolution during the growth of (100) and (111) oriented YSZ on Si (100) by radio frequency and reactive direct current sputtering has been investigated with an in-situ monitor and correlated with texture evolution. Films nucleated at rates <5 nm/min are found to be (111) oriented and grow predominantly under a compressive steady state stress. Films nucleated at rates >20 nm/min are found to be (100) oriented and grow under tension. A change in growth rate following the nucleation stage does not change the orientation. The value of the final steady state stress varies from -4.7 GPa to 0.3 GPa. The in-situ studies show that the steady state stress generation is a dynamic phenomenon occurring at the growth surface and not decided at film nucleation. The combination of stress evolution and texture evolution data shows that the adatom injection into the grain boundaries is the predominant source of compressive stress and grain boundary formation at the growth surface is the source of tensile stress. (C) 2012 American Institute of Physics. http://dx.doi.org/10.1063/1.4757924]

THE LEGACY OF GN RAMACHANDRAN AND THE DEVELOPMENT OF STRUCTURAL BIOLOGY IN INDIA

G.N. Ramachandran is among the founding fathers of structural molecular biology. He made pioneering contributions in computational biology, modelling and what we now call bioinformatics. The triple helical coiled coil structure of collagen proposed by him forms the basis of much of collagen research at the molecular level. The Ramachandran map remains the simplest descriptor and tool for validation of protein structures. He has left his imprint on almost all aspects of biomolecular conformation. His contributions in the area of theoretical crystallography have been outstanding. His legacy has provided inspiration for the further development of structural biology in India. After a pause, computational biology and bioinformatics are in a resurgent phase. One of the two schools established by Ramachandran pioneered the development of macromolecular crystallography, which has now grown into an important component of modern biological research in India. Macromolecular NMR studies in the country are presently gathering momentum. Structural biology in India is now poised to again approach heights of the kind that Ramachandran conquered more than a generation ago.

The legacy of G. N. Ramachandran and the development of structural biology in India

G. N. Ramachandran is among the founding fathers of structural molecular biology. He made pioneering contributions in computational biology, modelling and what we now call bioinformatics. The triple helical coiled coil structure of collagen proposed by him forms the basis of much of collagen research at the molecular level. The Ramachandran map remains the simplest descriptor and tool for validation of protein structures. He has left his imprint on almost all aspects of biomolecular conformation. His contributions in the area of theoretical crystallography have been outstanding. His legacy has provided inspiration for the further development of structural biology in India. After a pause, computational biology and bioinformatics are in a resurgent phase. One of the two schools established by Ramachandran pioneered the development of macromolecular crystallography, which has now grown into an important component of modern biological research in India. Macromolecular NMR studies in the country are presently gathering momentum. Structural biology in India is now poised to again approach heights of the kind that Ramachandran conquered more than a generation ago.

Workshop on Conceptual/Theoretical Studies and Model Development including the MODEL Task Team Report; BASS Team Report; REX Task Team Reports

A workshop was convened by the MODEL Task Team and held June 23-28, 1996, in Nemuro, Japan, to develop the modeling requirements of the PICES Climate Change and Carrying Capacity (CCCC) Program. It was attended by over 40 scientists from all member nations of PICES. The principal objectives of the workshop were to • review the roles and limitations of modeling for the CCCC program; • propose the level of modeling required; and • provide a plan for how to promote these modeling activities. Secondary activities at the workshop included organisational meetings of the Regional comparisons (REX) and Basin-scale experiment (BASS) Task Teams, and a symposium by Japan-GLOBEC on “Development and application of new technologies for measurement and modeling in marine ecosystems.” This report serves as a record of the proceedings of this workshop. (PDF contains 89 pages)

Facilitated advocacy: supporting farmers to have a voice in policy making and the development of service provision

Listening to people, especially those who are poor, and involving them in policy making and decisions about service delivery processes are logical steps in building better services and improving policies aimed at poverty alleviation. This case describes a facilitated advocacy that helped to negotiate and support a role for poor people who farm and fish, to contribute recommendations for changes in services and policies that impact on their lives. The national Government of India’s Department of Animal Husbandry and Dairying and the Indian Council for Agricultural Research, both in the capital Delhi, have been linking with farmers and fishers and state government officials in the eastern states of Jharkhand, Orissa and West Bengal, in partnership with the STREAM Initiative of the intergovernmental Network of Aquaculture Centers in Asia Pacific and with the support of the UK Government Department for International Development, Natural resources Systems Program supporting farmers to have a voice(13 p.)

People and Business Development (PBD): Learning to deliver learning effectively

In October 2010, PBD introduced its eQual Learning VLE (virtual learning environment) to provide an online knowledge resource for its students. During the project, the company learnt many lessons about how to deliver learning effectively. In the course of a year researching VLE platforms, looking for material, and remapping NVQ courses for new QCF qualifications, the company realised that it was more important to deliver engaging and relevant content, rather than boasting the most innovative technology.

National policy framework and strategy for fisheries and aquaculture development in Pakistan: final national workshop Islamabad, 30-31 Oct. 2006

The Final National Workshop was held from 30-31 October 2006 in Islamabad, Pakistan, with the objectives to:

Sexual Reproduction and Early Development in the Estuarine Sea Anemone, Nematostella vectensis Stephenson, 1935

This dissertation: 1) determines the factor(s) responsible for spawning induction in NematosteJla vectensis; 2) isolates, describes, and documents the source of jelly from egg masses of N. vectensis; and 3) describes N. vectensis' early development. Namatostella vectensis were maintained on a 7-day mussel feeding/water change regime over 159 days. Within 36 hours of mussel feeding/water change. 69.1% of females and 78.5% of males spawned reliably. Through manipulation of feeding, water change, oxygen and nitrogenous waste concentrations, spawning induction was found to be triggered by the oxygen concentration associated with water change, and not by feeding. Ammonia, anemones' major waste product, inhibited this induction in a concentration-dependent manner. Female N. vectensis release eggs in a persistent jellied egg mass which is unique among the Actiniaria. The major component of this egg mass jelly was a positive periodic acid-Schiffs staining, 39.5-40.5 kD glycoprotein. Antibodies developed in rabbits against this glycoprotein bound to jelly of intact egg masses and to granules (~ 2.8 IJm in diameter) present in female anemone mesenteries and their associated filaments. Antibodies did not label male tissues. Nematostella vecfensis embryos underwent first karyokinesis -60 minutes following the addition of sperm to eggs. Second nuclear division took place, followed by first cleavage, 90-120 minutes later. Each of the 4 blastomeres that resulted from first cleavage contained a single nucleus. Arrangement of these blastomeres ranged from radial to pseudospiral. Embryonic development was both asynchronous and holoblastic. Following formation of the 4-cell stage, 71% of embryos proceeded to cleave again to form an 8-cell stage. In each of the remaining 29% of embryos, a fusion of from 2-4 blastomeres resulted in 4 possible patterns which had no affect on either cleavage interval timing or subsequent development. The fusion event was not due to ooplasmic segregation. Blastomeres isolated from 4-celled embryos were regulative and developed into normal planula larvae and juvenile anemones that were 1/4 the size of those that developed from intact 4-celled embryos. Embryos exhibiting the fusion phenomenon were examined at the fine structural level. The fusion phenomenon resulted in formation of a secondary syncytium and was not a mere compaction of blastomeres.

Fishery management plans and the development of artisanal fisheries in Nigeria: a review

Management of natural resources all over the world is of paramount importance to their sustainability in developing countries like Nigeria, there is less emphasis on proper management especially of fishery and other aquatic resources due to lack of sensitization and enlightenment of the rural dwellers who are closer to such natural resources. The main thrust of this review is to examine the management plans for Nigerian freshwater bodies (rivers and lakes) and the impact of such plans on the artisanal fisheries development in Nigeria. From the on-shelf information gathered there is scarcity of information on the management of Nigerian freshwater body's information available indicates that there is the traditional fisheries management and the government legal approach in form of fisheries Laws and Regulations. However, these management techniques are poorly carried out since there is a poor follow-up. Appreciable impact of fisheries management introduced on Kanji Lake by the Nigerian-German Kanji Lake Fisheries Promotion Project (NGKLFPP) between 1993 and 2001 proves worthwhile as this introduced some management measures such as implementation of fisheries Laws and Regulations, the ban of obnoxious fishing methods, introduction of fishing license, constitution of a management unit and appointment of liaison fishermen. Within the operative years of the project a lot of success was achieved and it is recommended that the approach in Kainji should be replicated in other freshwater bodies in Nigeria to alleviate poverty in the rural poor fishing communities

Impact of Nigerian Agricultural Cooperative and Rural Development Bank (NACRDB) loan to artisanal fishermen in Lake Kainji

This study was conducted to assess the impact of Nigerian Agricultural, Co-operative and Rural Development Bank Loan on beneficiaries and non-beneficiaries fishermen in Lake Kainji. A total of fifty fishermen (25 beneficiaries and 25 non-beneficiaries) were randomly selected from five fishing villages along the lake basin. Data collected were scored and the percentages of the parameters were calculated appropriately. The types of loans disbursed to beneficiaries revealed that 52% was cash and 48% was in kind. The credit package ranged between N5, 000 to N150, 000 only. Only 48% of the loans granted were paid while the rest remained unpaid. The results obtained from the membership of fishermen Cooperative showed that 64% of beneficiaries were members while 36% were non-members. Also 36% of non-beneficiaries were members while 64% were not. The Common fishing gears used by the two categories of fishermen include gillnets longline, castnet and driftnets. Sixty percent of beneficiaries and 8% of non-beneficiaries fishermen were using canoe with outboard engines while the rest used canoes with paddles. Beneficiaries earned a higher income (N1, 000 to N9, 000) daily than non-beneficiaries (N1, 000 to N6, 000) daily from sales of fish caught. Major contrainsts to increased catch and income identified include inadequate capital, non- availability of fishing inputs, stealing of fishing gears, lack of access to credit facilities and menace of stump and water hyacinth in the lake. Lastly, recommendation were made for the bank management, government and other lending institutions on how to improve the livelihood of the Artisanal fishermen by increasing the loan usually granted

Poverty alleviation and rural development in Nigeria: a gender perspective

The paper examines the concept of the feminization of poverty and reviews the limited evidence on the extent of poverty among women. It then examines the arguments that poor women can be highly effective change agents for the eradication of poverty. However, all the women may be considered as instruments for eliminating poverty, lack of understanding an appreciation of the impact of their sex roles and of gender roles and stereotypes continue to prevent the realization of this potential. Therefore, the paper moves on to summarize the differences between sex and gender and examines how both women's sexes roles and the imp gender roles and stereotypes lead to the feminization of poverty and exclude women from the participation in development and programmes to eliminate poverty. The paper reviews the major approaches: women in development or WID, gender and development or GAD and extension of GAD known as mainstreaming. Finally, it considers the issue of poverty, women and gender in Nigeria. It also advances a number of recommendations on women and gender poverty and rural development for the consideration of policy-makers in Nigeria