Participatory modelling to support decision making in water management under uncertainty: Two comparative case studies in the Guadiana river basin, Spain.

A participatory modelling process has been conducted in two areas of the Guadiana river (the upper and the middle sub-basins), in Spain, with the aim of providing support for decision making in the water management field. The area has a semi-arid climate where irrigated agriculture plays a key role in the economic development of the region and accounts for around 90% of water use. Following the guidelines of the European Water Framework Directive, we promote stakeholder involvement in water management with the aim to achieve an improved understanding of the water system and to encourage the exchange of knowledge and views between stakeholders in order to help building a shared vision of the system. At the same time, the resulting models, which integrate the different sectors and views, provide some insight of the impacts that different management options and possible future scenarios could have. The methodology is based on a Bayesian network combined with an economic model and, in the middle Guadiana sub-basin, with a crop model. The resulting integrated modelling framework is used to simulate possible water policy, market and climate scenarios to find out the impacts of those scenarios on farm income and on the environment. At the end of the modelling process, an evaluation questionnaire was filled by participants in both sub-basins. Results show that this type of processes are found very helpful by stakeholders to improve the system understanding, to understand each others views and to reduce conflict when it exists. In addition, they found the model an extremely useful tool to support management. The graphical interface, the quantitative output and the explicit representation of uncertainty helped stakeholders to better understand the implications of the scenario tested. Finally, the combination of different types of models was also found very useful, as it allowed exploring in detail specific aspects of the water management problems.

Decision-Making Mechanism to Organize the Agenda of a Guide-Robot

One of the major challenges in evolutionary robotics is constituted by the need of the robot being able to make decisions on its own, in accordance with the multiple tasks programmed, optimizing its timings and power. In this paper, we present a new automatic decision making mechanism for a robot guide that allows the robot to make the best choice in order to reach its aims, performing its tasks in an optimal way. The election of which is the best alternative is based on a series of criteria and restrictions of the tasks to perform. The software developed in the project has been verified on the tour-guide robot Urbano. The most important aspect of this proposal is that the design uses learning as the means to optimize the quality in the decision making. The modeling of the quality index of the best choice to perform is made using fuzzy logic and it represents the beliefs of the robot, which continue to evolve in order to match the "external reality”. This fuzzy system is used to select the most appropriate set of tasks to perform during the day. With this tool, the tour guide-robot prepares its agenda daily, which satisfies the objectives and restrictions, and it identifies the best task to perform at each moment. This work is part of the ARABOT project of the Intelligent Control Research Group at the Universidad Politécnica de Madrid to create "awareness" in a robot guide.

Analysing the complexity of the model-based decision making processes within the industrial management context

PURPOSE The decision-making process plays a key role in organizations. Every decision-making process produces a final choice that may or may not prompt action. Recurrently, decision makers find themselves in the dichotomous question of following a traditional sequence decision-making process where the output of a decision is used as the input of the next stage of the decision, or following a joint decision-making approach where several decisions are taken simultaneously. The implication of the decision-making process will impact different players of the organization. The choice of the decision- making approach becomes difficult to find, even with the current literature and practitioners’ knowledge. The pursuit of better ways for making decisions has been a common goal for academics and practitioners. Management scientists use different techniques and approaches to improve different types of decisions. The purpose of this decision is to use the available resources as well as possible (data and techniques) to achieve the objectives of the organization. The developing and applying of models and concepts may be helpful to solve managerial problems faced every day in different companies. As a result of this research different decision models are presented to contribute to the body of knowledge of management science. The first models are focused on the manufacturing industry and the second part of the models on the health care industry. Despite these models being case specific, they serve the purpose of exemplifying that different approaches to the problems and could provide interesting results. Unfortunately, there is no universal recipe that could be applied to all the problems. Furthermore, the same model could deliver good results with certain data and bad results for other data. A framework to analyse the data before selecting the model to be used is presented and tested in the models developed to exemplify the ideas. METHODOLOGY As the first step of the research a systematic literature review on the joint decision is presented, as are the different opinions and suggestions of different scholars. For the next stage of the thesis, the decision-making process of more than 50 companies was analysed in companies from different sectors in the production planning area at the Job Shop level. The data was obtained using surveys and face-to-face interviews. The following part of the research into the decision-making process was held in two application fields that are highly relevant for our society; manufacturing and health care. The first step was to study the interactions and develop a mathematical model for the replenishment of the car assembly where the problem of “Vehicle routing problem and Inventory” were combined. The next step was to add the scheduling or car production (car sequencing) decision and use some metaheuristics such as ant colony and genetic algorithms to measure if the behaviour is kept up with different case size problems. A similar approach is presented in a production of semiconductors and aviation parts, where a hoist has to change from one station to another to deal with the work, and a jobs schedule has to be done. However, for this problem simulation was used for experimentation. In parallel, the scheduling of operating rooms was studied. Surgeries were allocated to surgeons and the scheduling of operating rooms was analysed. The first part of the research was done in a Teaching hospital, and for the second part the interaction of uncertainty was added. Once the previous problem had been analysed a general framework to characterize the instance was built. In the final chapter a general conclusion is presented. FINDINGS AND PRACTICAL IMPLICATIONS The first part of the contributions is an update of the decision-making literature review. Also an analysis of the possible savings resulting from a change in the decision process is made. Then, the results of the survey, which present a lack of consistency between what the managers believe and the reality of the integration of their decisions. In the next stage of the thesis, a contribution to the body of knowledge of the operation research, with the joint solution of the replenishment, sequencing and inventory problem in the assembly line is made, together with a parallel work with the operating rooms scheduling where different solutions approaches are presented. In addition to the contribution of the solving methods, with the use of different techniques, the main contribution is the framework that is proposed to pre-evaluate the problem before thinking of the techniques to solve it. However, there is no straightforward answer as to whether it is better to have joint or sequential solutions. Following the proposed framework with the evaluation of factors such as the flexibility of the answer, the number of actors, and the tightness of the data, give us important hints as to the most suitable direction to take to tackle the problem. RESEARCH LIMITATIONS AND AVENUES FOR FUTURE RESEARCH In the first part of the work it was really complicated to calculate the possible savings of different projects, since in many papers these quantities are not reported or the impact is based on non-quantifiable benefits. The other issue is the confidentiality of many projects where the data cannot be presented. For the car assembly line problem more computational power would allow us to solve bigger instances. For the operation research problem there was a lack of historical data to perform a parallel analysis in the teaching hospital. In order to keep testing the decision framework it is necessary to keep applying more case studies in order to generalize the results and make them more evident and less ambiguous. The health care field offers great opportunities since despite the recent awareness of the need to improve the decision-making process there are many opportunities to improve. Another big difference with the automotive industry is that the last improvements are not spread among all the actors. Therefore, in the future this research will focus more on the collaboration between academia and the health care sector.

Case-based reasoning to support decision making for managing drinking water quality events in distribution systems

Peer reviewed

Reactive, Slow and...Innovative? Decision-making Structures and Policy Outputs

Consensus democracies like Switzerland are generally known to have a low innovation capacity (Lijphart 1999). This is due to the high number of veto points such as perfect bicameralism or the popular referendum. These institutions provide actors opposing a policy with several opportunities to block potential policy change (Immergut 1990; Tsebelis 2002). In order to avoid a failure of a process because opposing actors activate veto points, decision-making processes in Switzerland tend to integrate a large number of actors with different - and often diverging - preferences (Kriesi and Trechsel 2008). Including a variety of actors in a decision-making process and taking into account their preferences implies important trade-offs. Integrating a large number of actors and accommodating their preferences takes time and carries the risk of resulting in lowest common denominator solutions. On the contrary, major innovative reforms usually fail or come only as a result of strong external pressures from either the international environment, economic turmoil or the public (Kriesi 1980: 635f.; Kriesi and Trechsel 2008; Sciarini 1994). Standard decision-making processes are therefore characterized as reactive, slow and capable of only marginal adjustments (Kriesi 1980; Kriesi and Trechsel 2008; Linder 2009; Sciarini 2006). This, in turn, may be at odds with the rapid developments of international politics, the flexibility of the private sector, or the speed of technological development.

Intelligent Automaticity in Moral Judgment and Decision-Making

Thesis (Ph.D.)--University of Washington, 2016-05

Precautionary principles: a jurisdiction-free framework for decision-making under risk

Fundamental principles of precaution are legal maxims that ask for preventive actions, perhaps as contingent interim measures while relevant information about causality and harm remains unavailable, to minimize the societal impact of potentially severe or irreversible outcomes. Such principles do not explain how to make choices or how to identify what is protective when incomplete and inconsistent scientific evidence of causation characterizes the potential hazards. Rather, they entrust lower jurisdictions, such as agencies or authorities, to make current decisions while recognizing that future information can contradict the scientific basis that supported the initial decision. After reviewing and synthesizing national and international legal aspects of precautionary principles, this paper addresses the key question: How can society manage potentially severe, irreversible or serious environmental outcomes when variability, uncertainty, and limited causal knowledge characterize their decision-making? A decision-analytic solution is outlined that focuses on risky decisions and accounts for prior states of information and scientific beliefs that can be updated as subsequent information becomes available. As a practical and established approach to causal reasoning and decision-making under risk, inherent to precautionary decision-making, these (Bayesian) methods help decision-makers and stakeholders because they formally account for probabilistic outcomes, new information, and are consistent and replicable. Rational choice of an action from among various alternatives-defined as a choice that makes preferred consequences more likely-requires accounting for costs, benefits and the change in risks associated with each candidate action. Decisions under any form of the precautionary principle reviewed must account for the contingent nature of scientific information, creating a link to the decision-analytic principle of expected value of information (VOI), to show the relevance of new information, relative to the initial ( and smaller) set of data on which the decision was based. We exemplify this seemingly simple situation using risk management of BSE. As an integral aspect of causal analysis under risk, the methods developed in this paper permit the addition of non-linear, hormetic dose-response models to the current set of regulatory defaults such as the linear, non-threshold models. This increase in the number of defaults is an important improvement because most of the variants of the precautionary principle require cost-benefit balancing. Specifically, increasing the set of causal defaults accounts for beneficial effects at very low doses. We also show and conclude that quantitative risk assessment dominates qualitative risk assessment, supporting the extension of the set of default causal models.

Referral to rehabilitation following traumatic brain injury: practitioners and the process of decision-making

The study aimed to examine the factors influencing referral to rehabilitation following traumatic brain injury (TBI) by using social problems theory as a conceptual model to focus on practitioners and the process of decision-making in two Australian hospitals. The research design involved semi-structured interviews with 18 practitioners and observations of 10 team meetings, and was part of a larger study on factors influencing referral to rehabilitation in the same settings. Analysis revealed that referral decisions were influenced primarily by practitioners' selection and their interpretation of clinical and non-clinical patient factors. Further, practitioners generally considered patient factors concurrently during an ongoing process of decision-making, with the combinations and interactions of these factors forming the basis for interpretations of problems and referral justifications. Key patient factors considered in referral decisions included functional and tracheostomy status, time since injury, age, family, place of residence and Indigenous status. However, rate and extent of progress, recovery potential, safety and burden of care, potential for independence and capacity to cope were five interpretative themes, which emerged as the justifications for referral decisions. The subsequent negotiation of referral based on patient factors was in turn shaped by the involvement of practitioners. While multi-disciplinary processes of decision-making were the norm, allied health professionals occupied a central role in referral to rehabilitation, and involvement of medical, nursing and allied health practitioners varied. Finally, the organizational pressures and resource constraints, combined with practitioners' assimilation of the broader efficiency agenda were central factors shaping referral. (C) 2004 Elsevier Ltd. All rights reserved.

Information giving and decision-making in patients with advanced cancer: A systematic review

Patients with advanced, non-curable cancer face difficult decisions on further treatment, where a small increase in survival time must be balanced against: the toxicity of the treatment. If patients want to be involved in these decisions, in keeping with current notions of autonomy and empowerment, they also require to be adequately informed both on the treatments proposed and on their own disease status and prognosis. A systematic review was performed on decision-making and information provision in patients with advanced cancer. Studies of interventions to improve information giving and encourage participation in decision-making were reviewed, including both randomised controlled trials and uncontrolled studies. Almost all patients expressed a desire for full information, but only about two-thirds wished to participate actively in decision-making. Higher educational level, younger age and female sex were predictive of a desire to participate in decision-making. Active decision-making was more common in patients with certain cancers (e.g. breast) than others (e.g. prostate). A number of simple interventions including question prompt sheets, audio-taping of consultations and patient decision aids have been shown to facilitate such involvement. (c) 2005 Elsevier Ltd. All rights reserved.

Occupational therapists' decision making in three therapy settings in Australia

Can a work setting with its organizational, cultural, and practical considerations influence the way occupational therapists make decisions regarding client interventions? There is currently a paucity of evidence available to answer this question. This study aimed to investigate the influence of work setting on therapists’ clinical reasoning in the management of clients with cerebral palsy and upper limb hypertonicity. Specifically the study aimed to examine therapists’ objective and stated policies, and their intervention decisions using Social Judgement Theory methodology. Participants were eighteen occupational therapists with more than five years experience with clients with cerebral palsy who were asked to make intervention decisions for clients represented by 90 case vignettes. They worked in three settings, hospitals (5), schools (6), and community (6). The results indicated that therapy settings did influence therapists’ decisions about intervention choices but not their objective and subjective policy decisions.

Bad apples in bad barrels revisited: Cognitive moral development, just world beliefs, rewards, and ethical decision-making

In this study, we test the interactive effect on ethical decision-making of (1) personal characteristics, and (2) personal expectancies based on perceptions of organizational rewards and punishments. Personal characteristics studied were cognitive moral development and belief in a just world. Using an in-basket simulation, we found that exposure to reward system information influenced managers' outcome expectancies. Further, outcome expectancies and belief in a just world interacted with managers' cognitive moral development to influence managers' ethical decision-making. In particular, low-cognitive moral development managers who expected that their organization condoned unethical behavior made less ethical decisions while high cognitive moral development managers became more ethical in this environment. Low cognitive moral development managers also behaved less ethically when their belief in a just world was high.

Collaborative decision-making processes for maintaining biodiversity: Two Australian case studies

There have been many models developed by scientists to assist decision-makers in making socio-economic and environmental decisions. It is now recognised that there is a shift in the dominant paradigm to making decisions with stakeholders, rather than making decisions for stakeholders. Our paper investigates two case studies where group model building has been undertaken for maintaining biodiversity in Australia. The first case study focuses on preservation and management of green spaces and biodiversity in metropolitan Melbourne under the umbrella of the Melbourne 2030 planning strategy. A geographical information system is used to collate a number of spatial datasets encompassing a range of cultural and natural assets data layers including: existing open spaces, waterways, threatened fauna and flora, ecological vegetation covers, registered cultural heritage sites, and existing land parcel zoning. Group model building is incorporated into the study through eliciting weightings and ratings of importance for each datasets from urban planners to formulate different urban green system scenarios. The second case study focuses on modelling ecoregions from spatial datasets for the state of Queensland. The modelling combines collaborative expert knowledge and a vast amount of environmental data to build biogeographical classifications of regions. An information elicitation process is used to capture expert knowledge of ecoregions as geographical descriptions, and to transform this into prior probability distributions that characterise regions in terms of environmental variables. This prior information is combined with measured data on the environmental variables within a Bayesian modelling technique to produce the final classified regions. We describe how linked views between descriptive information, mapping and statistical plots are used to decide upon representative regions that satisfy a number of criteria for biodiversity and conservation. This paper discusses the advantages and problems encountered when undertaking group model building. Future research will extend the group model building approach to include interested individuals and community groups.

Linking job insecurity to negative decision making: The mediating role of job tension

Job insecurity has increased markedly in the developed economies of the world (Gray, 2002). The effects of job insecurity on individual employees and on organisational outcomes, however, are controversial. For instance, Greenhalgh and Rosenblatt (1984) point out that job insecurity can result in increased work effort, while Dekker and Schaufeli, (1995) argue that insecurity leads to stress and decreased performance. In this paper, we outline a study examining the indirect impact of job insecurity on decision-making, via job-related tension. Based on a web survey involving 217 participants, we found that job insecurity indirectly increased the adoption of negative decision-making strategies by increasing employees’ level of job-related tension. Limitations and implications for theory and managers are also discussed.

Improving the economic decision making capability and viability of Chinese wool textile mills

The successful restructuring of Chinese industries is of immense importance not only for the continued development of China but also to the stability of the world economy. The transformation of the Chinese wool textile industry illustrates well the many problems and pressures currently facing most Chinese industries. The Chinese wool textile industry has undergone major upheaval and restructuring in its drive to modernize and take advantage of developments in world textile markets. Macro level ownership and administrative reforms are well advanced as is the uptake of new technology and equipment. However, the changing market and institutional environment also demands an increasing level of sophistication in mill management decisions including product selection, input procurement, product pricing, investment appraisal, cost analysis and proactive identification of new market and growth opportunities. This paper outlines a series of analyses that have been integrated into a decision-making model designed to assist mill managers with these decisions. Features of the model include a whole-of-mill approach, a design based on existing mill structures and information systems, and the capacity for the model to be tailored to individual mills. All of these features facilitate the adoption of the model by time and resource constrained managers seeking to maintain the viability of their enterprises in the face of extremely dynamic market conditions.

The influence of national culture on the level and outcome of IS decision making in the IS maintenance/redevelopment decision

Would the outcome of a Global multinational organization’s decision be the same if the same decision were to be made in different countries throughout the world? Within the same organization, we propose that national cultural differences can influence decision making in different countries and cultural clusters. While much work has been done on organizational cultural influences, this study examines the influence that national culture has on organizational decision making in respect to the evolution/redevelopment decision that organizations face when a system is believed to be entering the obsolescence phase. Building on findings from the Globe research program, we show by empirical testing of a theoretical model that national cultural dimensions are significantly associated with a) the outcome of the decision to enhance or re-develop a system, and b) the organizational level at which such decisions are made. This research is significant as a means to improve management decision making, particularly with regard to the enhancement versus re-development decision. The research suggests that a relatively uniform sub-culture exists across the global IS project level but that national cultural dimensions play a more important role in determining the organizational management level at which decisions are made.