Correction to Variations of Ice Bed Coupling Beneath and Beyond Ice Streams: The Force Balance

A geometrical force balance that links stresses to ice bed coupling along a flow band of an ice sheet was developed in 1988 for longitudinal tension in ice streams and published 4 years later. It remains a work in progress. Now gravitational forces balanced by forces producing tensile, compressive, basal shear, and side shear stresses are all linked to ice bed coupling by the floating fraction phi of ice that produces the concave surface of ice streams. These lead inexorably to a simple formula showing how phi varies along these flow bands where surface and bed topography are known: phi = h(O)/h(I) with h(O) being ice thickness h(I) at x = 0 for x horizontal and positive upslope from grounded ice margins. This captures the basic fact in glaciology: the height of ice depends on how strongly ice couples to the bed. It shows how far a high convex ice sheet (phi = 0) has gone in collapsing into a low flat ice shelf (phi = 1). Here phi captures ice bed coupling under an ice stream and h(O) captures ice bed coupling beyond ice streams.

Variations of Ice Bed Coupling Beneath and Beyond Ice Streams: The Force Balance

A geometrical force balance that links stresses to ice bed coupling along a flow band of an ice sheet was developed in 1988 for longitudinal tension in ice streams and published 4 years later. It remains a work in progress. Now gravitational forces balanced by forces producing tensile, compressive, basal shear, and side shear stresses are all linked to ice bed coupling by the floating fraction phi of ice that produces the concave surface of ice streams. These lead inexorably to a simple formula showing how phi varies along these flow bands where surface and bed topography are known: phi = h(O)/h(I) with h(O) being ice thickness h(I) at x = 0 for x horizontal and positive upslope from grounded ice margins. This captures the basic fact in glaciology: the height of ice depends on how strongly ice couples to the bed. It shows how far a high convex ice sheet (phi = 0) has gone in collapsing into a low flat ice shelf (phi = 1). Here phi captures ice bed coupling under an ice stream and h(O) captures ice bed coupling beyond ice streams.

The role of controlled attention and selective encoding for kindergarteners' learning

Selectivity in encoding, aspects of attentional control and their contribution to learning performance were explored in a sample of preschoolers. While the children are performing a learning task, their encoding of relevant and attention towards irrelevant information was recorded through an eye-tracking device. Recognition of target items was used as measure of learning outcome, and individual differences in resistance to interference and inhibition of attention to task-irrelevant stimuli (i.e. distractibility) were used as measures of executive control of attention. Results indicated well-developed selectivity during encoding in young children. Recognition performance was related to selective encoding and aspects of attentional control, explaining individual differences in learning. Copyright © 2011 John Wiley & Sons, Ltd.

Reactivity to Accelerometer Measurement of Children and Adolescents

PURPOSE: Awareness of being monitored can influence participants' habitual physical activity (PA) behavior. This reactivity effect may threaten the validity of PA assessment. Reports on reactivity when measuring the PA of children and adolescents have been inconsistent. The aim of this study was to investigate whether PA outcomes measured by accelerometer devices differ from measurement day to measurement day and whether the day of the week and the day on which measurement started influence these differences. METHODS: Accelerometer data (counts per minute [cpm]) of children and adolescents (n = 2081) pooled from eight studies in Switzerland with at least 10 h of daily valid recording were investigated for effects of measurement day, day of the week, and start day using mixed linear regression. RESULTS: The first measurement day was the most active day. Counts per minute were significantly higher than on the second to the sixth day, but not on the seventh day. Differences in the age-adjusted means between the first and consecutive days ranged from 23 to 45 cpm (3.6%-7.1%). In preschoolchildren, the differences almost reached 10%. The start day significantly influenced PA outcome measures. CONCLUSIONS: Reactivity to accelerometer measurement of PA is likely to be present to an extent of approximately 5% on the first day and may introduce a relevant bias to accelerometer-based studies. In preschoolchildren, the effects are larger than those in elementary and secondary schoolchildren. As the day of the week and the start day significantly influence PA estimates, researchers should plan for at least one familiarization day in school-age children and randomly assign start days.

Reactivation of encoding-related brain activity during memory retrieval

Neuronal models predict that retrieval of specific event information reactivates brain regions that were active during encoding of this information. Consistent with this prediction, this positron-emission tomography study showed that remembering that visual words had been paired with sounds at encoding activated some of the auditory brain regions that were engaged during encoding. After word-sound encoding, activation of auditory brain regions was also observed during visual word recognition when there was no demand to retrieve auditory information. Collectively, these observations suggest that information about the auditory components of multisensory event information is stored in auditory responsive cortex and reactivated at retrieval, in keeping with classical ideas about “redintegration,” that is, the power of part of an encoded stimulus complex to evoke the whole experience.

Spectral BRDF-based determination of proper measurement geometries to characterize color shift of special effect coatings

A reduced set of measurement geometries allows the spectral reflectance of special effect coatings to be predicted for any other geometry. A physical model based on flake-related parameters has been used to determine nonredundant measurement geometries for the complete description of the spectral bidirectional reflectance distribution function (BRDF). The analysis of experimental spectral BRDF was carried out by means of principal component analysis. From this analysis, a set of nine measurement geometries was proposed to characterize special effect coatings. It was shown that, for two different special effect coatings, these geometries provide a good prediction of their complete color shift.

Development of a magnetic resonance compatible wrist device for the analysis of movement encoding in the brain

Tese de mestrado integrado em Engenharia Biomédica e Biofísica, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2016

Standards and tests for the measurement of the efficiency of schools and school systems,

cont. VI. The application of standard measurements to school administration. [By] D.C. Bliss. VII. A half-year's progress in the achievement of one school system. A. The progress as measured by the Thorndike visual vocabulary test. B. The progress as measured by the Courtis tests, series B. [By] H.G. Childs. VIII. Courtis tests in arithmetic: value to superintendents and teacher. [By] S.A. Courtis. IX. Use of standard tests at Salt Lake City, Utah. [By] E. P. Cubberley. X. Reading. [By] C.H. Judd. XI. Studies by the Bureau of research and efficiency of Kansas City, Mo. [By] George Melcher. XII. The effects of efficiency tests in reading on a city school system. [By] E.E. Oberholtzer. XIII. Investigation of spelling in the schools of Oakland, Cal. [By] J.B. Sears. XIV. Standard tests as aids in the classification and promotion of pupils. [By] Daniel Starch. XV. The use of mental tests in the school. [By] G.M. Whipple.

Water chemistry controls on minor elemental concentrations and strontium isotopic compositions of freshwater biogenic carbonate in northeastern Washington streams

Tracking the movement of migratory freshwater fish is essential to those invested in rebuilding declining fish populations. Using strontium isotopic signatures to match calcified fish tissues to streams where fish spawn is a useful method of tracking migratory fish where physical tracking methods such as radio, acoustic, or external tags, have proven unsuccessful. In this study, we develop tools to practice this method of tracking fish in Lake Roosevelt and its upstream tributaries in Washington State by analyzing the elemental concentrations and 87Sr/86Sr ratios of water samples, and mussel shell samples. This study evaluates whether mussel shells act as an appropriate proxy for water chemistry by comparing the 87Sr/86Sr isotope ratios of water samples to the 87Sr/86Sr isotope ratios of mussel shells sampled from the same, or nearby, locations. We compare concentrations of Ba, Ca, Cd, Cu, Fe, Mg, Pb, Sr, and U in the water and mussel shell samples to determine the feasibility of using mussel shells as a proxy for water chemistry. If it is determined that the concentrations of these elements in mussel shells reflect that of the surrounding water composition, the elemental composition of mussel shells can be compared to that of calcified tissues in fish, such as otoliths, to infer the location of the natal stream. We report analyses of water and mussel shell samples collected from Lake Roosevelt, Sanpoil River, Spokane River, Colville River, Kettle River, Pend Oreille River, Kootenay River, and Columbia River in Washington State. Each of these rivers is a tributary to Lake Roosevelt, and each flows through different geologic units. We hypothesize that the differences in the rock units of each stream’s watershed are reflected in the elemental concentrations and strontium isotopic ratios of water in each stream and in the lake. We also hypothesize that the composition of the mussel shells will match the composition of the water samples, therefore allowing us to use the mussel shells as a proxy for local water chemistry. Additionally, we hypothesize that the composition of the mussel shells will vary by location, and that we will be able to then infer where a fish is from by matching the composition of the fish in question to the mussels we have analyzed. We found that 87Sr/86Sr values for water and mussel hinge samples collected from tributaries east of Lake Roosevelt are significantly higher than the 87Sr/86Sr values for samples collected from tributaries west of Lake Roosevelt with averages of 0.7235 and 0.7089, respectively. The average 87Sr/86Sr ratios for water and mussel hinge samples collected within Lake Roosevelt is 0.7158, which is between the averages for samples collected east and west of the lake. Generally, older rocks are exposed on the east side of the lake, and younger rocks on the west side of the lake, so our 87Sr/86Sr values support the hypothesis that geologic units are a primary control on water chemistry, and that tributary compositions mix to form an average weighed by flow in Lake Roosevelt. The 87Sr/86Sr values for water and mussel shell samples collected from the same locations have a strong, positive linear correlation, suggesting that mussel shell 87Sr/86Sr ratios reflect the 87Sr/86Sr ratios of the ambient water. With these data, we can distinguish between different streams and the lake, but cannot distinguish between samples from within the same stream or within Lake Roosevelt. The Sr:Ca and Fe:Ca ratios of water samples show positive correlations with mussel shell compositions, with R2 values of 0.82 and 0.52, respectively. Ratios of Mg, Ba, Cu, Cd, Pb, and U to Ca showed little or no positive correlation between water and mussel shell samples. The elemental concentration data collected for this study do not demonstrate whether a correlation between elemental ratios in water samples and elemental ratios in mussel shell samples collected from the same location exists. Positive Sr:Ca and Fe:Ca correlations for water versus mussel shell samples indicate that perhaps for some elements, the composition of mussel shells are representative of the composition of ambient water. Using elemental concentration ratios to complement 87Sr/86Sr isotopic data may enhance our ability to identify correlations between water and mussel shell samples, and ultimately between mussel shell and otolith samples. The hinge part of a mussel shell may be used as a proxy for local water composition because the mussel shell composition reflects that of the local ambient water. The hinge of the mussel has the same composition as the whole mussel shell. We measured variation of 87Sr/86Sr ratios in the water among different streams and Lake Roosevelt. The 87Sr/86Sr values for samples collected in tributaries east of Lake Roosevelt, which erode older rocks, are higher for mussel shell and water samples than the average 87Sr/86Sr values for mussel shell and water samples collected in tributaries west of Lake Roosevelt, which flow through younger rocks.

Random error in willingness to pay measurement: A multiple indicators, latent variable approach to the reliability of contingent values

The reliability of measurement refers to unsystematic error in observed responses. Investigations of the prevalence of random error in stated estimates of willingness to pay (WTP) are important to an understanding of why tests of validity in CV can fail. However, published reliability studies have tended to adopt empirical methods that have practical and conceptual limitations when applied to WTP responses. This contention is supported in a review of contingent valuation reliability studies that demonstrate important limitations of existing approaches to WTP reliability. It is argued that empirical assessments of the reliability of contingent values may be better dealt with by using multiple indicators to measure the latent WTP distribution. This latent variable approach is demonstrated with data obtained from a WTP study for stormwater pollution abatement. Attitude variables were employed as a way of assessing the reliability of open-ended WTP (with benchmarked payment cards) for stormwater pollution abatement. The results indicated that participants' decisions to pay were reliably measured, but not the magnitude of the WTP bids. This finding highlights the need to better discern what is actually being measured in VVTP studies, (C) 2003 Elsevier B.V. All rights reserved.

Meaning-based quality-of-life measurement: A way forward in conceptualizing and measuring client outcomes?

Despite current imperatives to measure client outcomes, social workers have expressed frustration with the ability of traditional forms of quantitative methods to engage with complexity, individuality and meaning. This paper argues that the inclusion of a meaning-based as opposed to a function-based approach to quality of life (QOL) may offer a quantitative means of measurement that is congruent with social-work values and practice.

Performance measurement of intensive care services in hospitals:The case of Barbados

The Intensive Care Unit (ICU) being one of those vital areas of a hospital providing clinical care, the quality of service rendered must be monitored and measured quantitatively. It is, therefore, essential to know the performance of an ICU, in order to identify any deficits and enable the service providers to improve the quality of service. Although there have been many attempts to do this with the help of illness severity scoring systems, the relative lack of success using these methods has led to the search for a form of measurement, which would encompass all the different aspects of an ICU in a holistic manner. The Analytic Hierarchy Process (AHP), a multiple-attribute, decision-making technique is utilised in this study to evolve a system to measure the performance of ICU services reliably. This tool has been applied to a surgical ICU in Barbados; we recommend AHP as a valuable tool to quantify the performance of an ICU. Copyright © 2004 Inderscience Enterprises Ltd.

Influence of the generated power, measurement bandwidth, and noise level on intensity statistics of a quasi-CW Raman fiber laser

In the present paper we numerically study instrumental impact on statistical properties of quasi-CW Raman fiber laser using a simple model of multimode laser radiation. Effects, that have the most influence, are limited electrical bandwidth of measurement equipment and noise. To check this influence, we developed a simple model of the multimode quasi- CW generation with exponential statistics (i.e. uncorrelated modes). We found that the area near zero intensity in probability density function (PDF) is strongly affected by both factors, for example both lead to formation of a negative wing of intensity distribution. But far wing slope of PDF is not affected by noise and, for moderate mismatch between optical and electrical bandwidth, is only slightly affected by bandwidth limitation. The generation spectrum often becomes broader at higher power in experiments, so the spectral/electrical bandwidth mismatch factor increases over the power that can lead to artificial dependence of the PDF slope over the power. It was also found that both effects influence the ACF background level: noise impact decreases it, while limited bandwidth leads to its increase. © (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Review of industrial temperature measurement technologies and research priorities for the thermal characterisation of the factories of the future

As the largest source of dimensional measurement uncertainty, addressing the challenges of thermal variation is vital to ensure product and equipment integrity in the factories of the future. While it is possible to closely control room temperature, this is often not practical or economical to realise in all cases where inspection is required. This article reviews recent progress and trends in seven key commercially available industrial temperature measurement sensor technologies primarily in the range of 0 °C–50 °C for invasive, semi-invasive and non-invasive measurement. These sensors will ultimately be used to measure and model thermal variation in the assembly, test and integration environment. The intended applications for these technologies are presented alongside some consideration of measurement uncertainty requirements with regard to the thermal expansion of common materials. Research priorities are identified and discussed for each of the technologies as well as temperature measurement at large. Future developments are briefly discussed to provide some insight into which direction the development and application of temperature measurement technologies are likely to head.

Theory of hybrid computational and physical measurement-based integration of thermal and dimensional measurement

In dimensional metrology, often the largest source of uncertainty of measurement is thermal variation. Dimensional measurements are currently scaled linearly, using ambient temperature measurements and coefficients of thermal expansion, to ideal metrology conditions at 20˚C. This scaling is particularly difficult to implement with confidence in large volumes as the temperature is unlikely to be uniform, resulting in thermal gradients. A number of well-established computational methods are used in the design phase of product development for the prediction of thermal and gravitational effects, which could be used to a greater extent in metrology. This paper outlines the theory of how physical measurements of dimension and temperature can be combined more comprehensively throughout the product lifecycle, from design through to the manufacturing phase. The Hybrid Metrology concept is also introduced: an approach to metrology, which promises to improve product and equipment integrity in future manufacturing environments. The Hybrid Metrology System combines various state of the art physical dimensional and temperature measurement techniques with established computational methods to better predict thermal and gravitational effects.