Immunohistochemical detection of Clostridia species in paraffin-embedded tissues of experimentally inoculated guinea pigs

Blackleg is caused by Clostridium chauvoei, whereas malignant oedema is caused by C. chauvoei, C. septicum, C. sordellii, C. perfringens type A, and/or C. novyi type A. Anti-C. chauvoei, anti-C. septicum, anti-C. sordellii and anti-C. novyi type A polyclonal antibodies were produced in rabbits and purified in a column of DEAE-cellulose. Aliquots of the antisera were conjugated with fluorescein isothiocyanate and the remaining was used for the streptavidin biotin peroxidase technique (SBPT). SBPT was standardized to detect C. chauvoei, C. septicum, C. sordellii and C. novyi type A in formalin-fixed, paraffin-embedded tissues of guinea pigs. SBPT was compared to a fluorescent antibody technique (FAT). Sections and smears of muscle from inoculation area (MIA), heart, liver, spleen and kidney, were obtained for both SBPT and FAT. Cross-reactions between the different Clostridial species were not observed. C. chauvoei and C. septicum were detected in all specimens from the animals inoculated with these microorganisms, while only sections of muscle obtained from all the animals inoculated with C. sordellii and C. novyi type A were positive. The same results observed by the SBPT, were obtained on tissue smears of these microorganisms stained by the FAT. The results indicate that SBPT is suitable for detection of C. chauvoei, C. septicum, C. sordellii and C. novyi type A in formalin-fixed, paraffin-embedded tissues of guinea pigs.

Nested-PCR for the detection of Mycoplasma hyopneumoniae in bronchial alveolar swabs, frozen tissues and formalin-fixed paraffin-embedded swine lung samples: comparative evaluation with immunohistochemical findings and histological features

The diagnosis of Mycoplasma hyopneumoniae infection is often performed through histopathology, immunohistochemistry (IHC) and polymerase chain reaction (PCR) or a combination of these techniques. PCR can be performed on samples using several conservation methods, including swabs, frozen tissue or formalin-fixed and paraffin-embedded (FFPE) tissue. However, the formalin fixation process often inhibits DNA amplification. To evaluate whether M. hyopneumoniae DNA could be recovered from FFPE tissues, 15 lungs with cranioventral consolidation lesions were collected in a slaughterhouse from swine bred in herds with respiratory disease. Bronchial swabs and fresh lung tissue were collected, and a fragment of the corresponding lung section was placed in neutral buffered formalin for 48 hours. A PCR assay was performed to compare FFPE tissue samples with samples that were only refrigerated (bronchial swabs) or frozen (tissue pieces). M. hyopneumoniae was detected by PCR in all 15 samples of the swab and frozen tissue, while it was detected in only 11 of the 15 FFPE samples. Histological features of M. hyopneumoniae infection were presented in 11 cases and 7 of these samples stained positive in IHC. Concordance between the histological features and detection results was observed in 13 of the FFPE tissue samples. PCR was the most sensitive technique. Comparison of different sample conservation methods indicated that it is possible to detect M. hyopneumoniae from FFPE tissue. It is important to conduct further research using archived material because the efficiency of PCR could be compromised under these conditions.

Cost-benefit analysis of using test automation in the development of embedded software

The goal of this thesis is to make a case study of test automation’s profitability in the development of embedded software in a real industrial setting. The cost-benefit analysis is done by considering the costs and benefits test automation causes to software development, before the software is released to customers. The potential benefits of test automation regarding software quality after customer release were not estimated. Test automation is a significant investment which often requires dedicated resources. When done accordingly, the investment in test automation can produce major cost savings by reducing the need for manual testing effort, especially if the software is developed with an agile development framework. It can reduce the cost of avoidable rework of software development, as test automation enables the detection of construction time defects in the earliest possible moment. Test automation also has many pitfalls such as test maintainability and testability of the software, and if those areas are neglected, the investment in test automation may become worthless or it may even produce negative results. The results of this thesis suggest that test automation is very profitable at the company under study.

Project Management Tools in Agile Embedded Systems Development

Agile methods have become increasingly popular in the field of software engineering. While agile methods are now generally considered applicable to software projects of many different kinds, they have not been widely adopted in embedded systems development. This is partly due to the natural constraints that are present in embedded systems development (e.g. hardware–software interdependencies) that challenge the utilization of agile values, principles and practices. The research in agile embedded systems development has been very limited, and this thesis tackles an even less researched theme related to it: the suitability of different project management tools in agile embedded systems development. The thesis covers the basic aspects of many different agile tool types from physical tools, such as task boards and cards, to web-based agile tools that offer all-round solutions for application lifecycle management. In addition to these two extremities, there is also a wide range of lighter agile tools that focus on the core agile practices, such as backlog management. Also other non-agile tools, such as bug trackers, can be used to support agile development, for instance, with plug-ins. To investigate the special tool requirements in agile embedded development, the author observed tool related issues and solutions in a case study involving three different companies operating in the field of embedded systems development. All three companies had a distinct situation in the beginning of the case and thus the tool solutions varied from a backlog spreadsheet built from scratch to plug-in development for an already existing agile software tool. Detailed reports are presented of all three tool cases. Based on the knowledge gathered from agile tools and the case study experiences, it is concluded that there are tool related issues in the pilot phase, such as backlog management and user motivation. These can be overcome in various ways epending on the type of a team in question. Finally, five principles are formed to give guidelines for tool selection and usage in agile embedded systems development.

Design of a Traction Motor With Tooth-Coil Windings and Embedded Magnets

Traction motor design significantly differs from industrial machine design. The starting point is the load cycle instead of the steady-state rated operation point. The speed of the motor varies from zero to very high speeds. At low speeds, heavy overloading is used for starting, and the field-weakening region also plays an important role. Finding a suitable fieldweakening point is one of the important design targets. At the lowest speeds, a high torque output is desired, and all current reserves of the supplying converter unit are used to achieve the torque. In this paper, a 110-kW 2.5-p.u. starting torque and a maximum 2.5-p.u. speed permanent-magnet traction motor will be studied. The field-weakening point is altered by varying the number of winding turns of machine. One design is selected for prototyping. Theoretical results are verified by measurements.

Guidelines for small embedded system companies aiming to enter the space industry

This guide summarizes useful information about the European Space Agency (ESA), the European space industry, the ECSS standards and product assurance for small and medium enterprises that are aiming to enter the industry. Additionally, the applicability of agile development in space projects is discussed.

Embedded Service Bus for Internet of Things Interoperability

Internet of Things (IoT) technologies are developing rapidly, and therefore there exist several standards of interconnection protocols and platforms. The existence of heterogeneous protocols and platforms has become a critical challenge for IoT system developers. To mitigate this challenge, few alliances and organizations have taken the initiative to build a framework that helps to integrate application silos. Some of these frameworks focus only on a specific domain like home automation. However, the resource constraints in the large proportion of connected devices make it difficult to build an interoperable system using such frameworks. Therefore, a general purpose, lightweight interoperability framework that can be used for a range of devices is required. To tackle the heterogeneous nature, this work introduces an embedded, distributed and lightweight service bus, Lightweight IoT Service bus Architecture (LISA), which fits inside the network stack of a small real-time operating system for constrained nodes. LISA provides a uniform application programming interface for an IoT system on a range of devices with variable resource constraints. It hides platform and protocol variations underneath it, thus facilitating interoperability in IoT implementations. LISA is inspired by the Network on Terminal Architecture, a service centric open architecture by Nokia Research Center. Unlike many other interoperability frameworks, LISA is designed specifically for resource constrained nodes and it provides essential features of a service bus for easy service oriented architecture implementation. The presented architecture utilizes an intermediate computing layer, a Fog layer, between the small nodes and the cloud, thereby facilitating the federation of constrained nodes into subnetworks. As a result of a modular and distributed design, the part of LISA running in the Fog layer handles the heavy lifting to assist the lightweight portion of LISA inside the resource constrained nodes. Furthermore, LISA introduces a new networking paradigm, Node Centric Networking, to route messages across protocol boundaries to facilitate interoperability. This thesis presents a concept implementation of the architecture and creates a foundation for future extension towards a comprehensive interoperability framework for IoT.

Trust Embedded Open Innovation: Human-Centricity in the Financial

Globalization and interconnectedness in the worldwide sphere have changed the existing and prevailing modus operandi of organizations around the globe and have challenged existing practices along with the business as usual mindset. There are no rules in terms of creating a competitive advantage and positioning within an unstable, constantly changing and volatile globalized business environment. The financial industry, the locomotive or the flagship industry of global economy, especially, within the aftermath of the financial crisis, has reached a certain point trying to recover and redefine its strategic orientation and positioning within the global business arena. Innovation has always been a trend and a buzzword and by many has been considered as the ultimate answer to any kind of problem. The mantra Innovate or Die has been prevailing in any organizational entity in a, sometimes, ruthless endeavour to develop cutting-edge products and services and capture a landmark position in the market. The emerging shift from a closed to an open innovation paradigm has been considered as new operational mechanism within the management and leadership of the company of the future. To that respect, open innovation has been experiencing a tremendous growth research trajectory by putting forward a new way of exchanging and using surplus knowledge in order to sustain innovation within organizations and in the level of industry. In the abovementioned reality, there seems to be something missing: the human element. This research, by going beyond the traditional narratives for open innovation, aims at making an innovative theoretical and managerial contribution developed and grounded on the on-going discussion regarding the individual and organizational barriers to open innovation within the financial industry. By functioning across disciplines and researching out to primary data, it debunks the myth that open innovation is solely a knowledge inflow and outflow mechanism and sheds light to the understanding on the why and the how organizational open innovation works by enlightening the broader dynamics and underlying principles of this fascinating paradigm. Little attention has been given to the role of the human element, the foundational pre-requisite of trust encapsulated within the precise and fundamental nature of organizing for open innovation, the organizational capabilities, the individual profiles of open innovation leaders, the definition of open innovation in the realms of the financial industry, the strategic intent of the financial industry and the need for nurturing a societal impact for human development. To that respect, this research introduces the trust-embedded approach to open innovation as a new insightful way of organizing for open innovation. It unveils the peculiarities of the corporate and individual spheres that act as a catalyst towards the creation of productive open innovation activities. The incentive of this research captures the fundamental question revolving around the need for financial institutions to recognise the importance for organizing for open innovation. The overarching question is why and how to create a corporate culture of openness in the financial industry, an organizational environment that can help open innovation excel. This research shares novel and cutting edge outcomes and propositions both under the prism of theory and practice. The trust-embedded open innovation paradigm captures the norms and narratives around the way of leading open innovation within the 21st century by cultivating a human-centricity mindset that leads to the creation of human organizations, leaving behind the dehumanization mindset currently prevailing within the financial industry.

Control of a line robot system with Embedded Linux

Many, if not all, aspects of our everyday lives are related to computers and control. Microprocessors and wireless communications are involved in our lives. Embedded systems are an attracting field because they combine three key factors, small size, low power consumption and high computing capabilities. The aim of this thesis is to study how Linux communicates with the hardware, to answer the question if it is possible to use an operating system like Debian for embedded systems and finally, to build a Mechatronic real time application. In the thesis a presentation of Linux and the Xenomai real time patch is given, the bootloader and communication with the hardware is analyzed. BeagleBone the evaluation board is presented along with the application project consisted of a robot cart with a driver circuit, a line sensor reading a black line and two Xbee antennas. It makes use of Xenomai threads, the real time kernel. According to the obtained results, Linux is able to operate as a real time operating system. The issue of future research is the area of embedded Linux is also discussed.

Phonon spectra and thermal properties of some fcc metals using embedded-atom potentials /

By employing the embedded-atom potentials of Mei et ai.[l], we have calculated the dynamical matrices and phonon dispersion curves for six fee metals (Cu,Ag,Au,Ni,Pd and Pt). We have also investigated, within the quasiharmonic approximation, some other thermal properties of these metals which depend on the phonon density of states, such as the temperature dependence of lattice constant, coefficient of linear thermal expansion, isothermal and adiabatic bulk moduli, heat capacities at constant volume and constant pressure, Griineisen parameter and Debye temperature. The computed results are compared with the experimental findings wherever possible. The comparison shows a generally good agreement between the theoretical values and experimental data for all properties except the discrepancies of phonon frequencies and Debye temperature for Pd, Pt and Au. Further, we modify the parameters of this model for Pd and Pt and obtain the phonon dispersion curves which is in good agreement with experimental data.

A framework for understanding the factors that influence spectators' recall and recognition of embedded sponsorship stimuli

Now, more than ever, sponsors of athletic events demand to see evidence of a commercial return, such as enhanced brand awareness, for their investment of cash or non-cash resources (Lough et aI., 2000). The most common way to measure the impact of perimeter signage (Le., any billboard or sign that displays a company's brand name and/or logo and which surrounds the playing area) on spectators' awareness of event sponsors has been through the use of brand name recall and recognition tests (Shilbury & Berriman, 1996). Recall testing requires spectators to list all of the sponsors they can remember seeing at, for example, an athletic event, strictly from memory and without any help (Cuneen & Hannan, 1993). With recognition testing, spectators are required to identify sponsors from a prepared list which include "dummy" brand names (i.e., sponsors that are present in the list but which do not actually sponsor the event). In order to determine whether sponsors' brand awareness objectives are being met, it is important for sport and recreation marketers to understand what influences a spectator's ability to remember (Le., recall and/or recognize) the brand names of companies who advertise on perimeter signage. The purpose this study was to examine the factors that influence spectators' recall and recognition of embedded sponsorship stimuli (i.e., company brand names on perimeter signage surrounding the play area) at a Canadian University's men's basketball game and football game. These factors included the number of games spectators attended over the course of the season (i.e., repeated exposure to sponsorship stimuli), spectators' level of involvement with the event, and spectators' level of involvement with the advertisements (i.e., perimeter signage). This study also examined the differences between recall and recognition as a means of measuring spectators' awareness of sponsors, and attempted to determine if there are sport differences in spectators' recall and recognition of perimeter signage. Upon leaving the football stadium or gymnasium, spectators were approached, at random, by trained research assistants located at each exit and asked to complete a brief survey questionnaire. Respondents completed the survey on-site. A total of 358 completed surveys were collected from spectators who attended the football (N = 277) and basketball (N = 81) games. The data suggest that football and basketball respondents recognized more sponsors' brand names than they recalled. In addition, football respondents who were highly involved with the event (i.e., those individuals who viewed attending the events as fun, interesting and exciting) attended more games over the course of the season and had significantly higher brand name recognition of sponsors who advertised on perimeter signage than those individuals with low involvement with the athletic event. Football respondents who were highly involved with the sponsors' advertisements (i.e., those individuals who viewed sponsors' perimeter signage as appealing, valuable and important) had significantly higher brand name recall of event sponsors than those individuals with low involvement with these sponsors' advertisements. Repeated exposure to perimeter signage did not have a significant influence on football or basketball respondents' recall or recognition of sponsors. Finally, the data revealed that football respondents had significantly higher recall of sponsors' brand names than basketball respondents. Conversely, basketball respondents had significantly higher recognition of sponsors' brand names than did football respondents.

The Lived Experience of Nursing Students With Formative Assessment Formally Embedded in Clinical Courses: A Transcendental Phenomenological Study

The potential of formative assessment (FA) for informing learning in classroom-based nursing courses is clearly established in the literature; however, research on FA in clinical courses remains scarce. This inquiry explored the lived experience of nursing students using transcendental phenomenology and described the phenomenon of being assessed in clinical courses. The research question guiding the study was: How is the phenomenon of assessment experienced by nursing students when FA is formally embedded in clinical courses? Inherent in this question were the following issues: (a) the meaning of clinical experiences for nursing students, (b) the meaning of being assessed through FA, and (c) what it is like to be assessed when FA is formally embedded within clinical experiences. The noematic themes that illuminated the whatness of the participants’ experience were (a) enabled cognitive activity, (b) useful feedback, (c) freedom to be, (d) enhanced focus, (e) stress moderator, and (f) respectful mentorship. The noetic themes associated with how the phenomenon was experienced were related to bodyhood, temporality, spatiality, and relationship to others. The results suggest a fundamental paradigm shift from traditional nursing education to a more pervasive integration of FA in clinical courses so that students have time to learn before being graded on their practice. Furthermore, this inquiry and the literature consulted provide evidence that using cognitive science theory to inform and reform clinical nursing education is a timely option to address the repeated calls from nursing leaders to modernize nursing education. This inquiry contributes to reduce our reliance on assumptions derived from research on FA in nursing classrooms and provides evidence based on the reality of using formative assessment in clinical courses. Recommendations for future research are presented.

SCIL processor : a common intermediate language processor for embedded systems

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Studies on the Development and Control of Desiccation cracks in compacted clay liner soils

The present study aimed at critically looking at the current practice of the installation of compacted clay liner using bentonite enhanced sand (BES). The application of bentonite is currently the most accepted practice for lining purposes. The ideal bentonite sand combination, which satisfies the liner requirements is 20% bentonite and 80% sand, was selected as one of the liner materials for the investigation of development of desiccation cracks. Locally available sundried marine clay and its combination with bentonite were also included in the study. The desiccation tests on liner materials were conducted for wet/dry cycles to simulate the seasonal variations. Digital image processing techniques were used to measure the crack intensity factor (CIF), a useful and effective parameter for quantification of desiccation cracking. The repeatability of the tests could be well established, as the variation in CIF values of identical samples had a very narrow range of 0 to 2%. The studies on the development of desiccation cracks showed that the CIF of bentonite enhanced sand mixture (BES) was 18.09%, 39.75% and 21.22% for the first, second and third cycles respectively, while it was only 9.83%, 7.52% and 4.58% respectively for sun dried marine clay (SMC). Thus the locally available, alternate liner material suggested, viz SMC, is far superior to BES, when subjected to alternate wet/dry cycles. Further, the improvement of these liner materials when amended with randomly distributed fibre reinforcements was also investigated. Three types of fibres ,namely nylon fibre, polypropylene monofilament and polypropylene fibre mesh were used for the study of fibre amended BES and SMC.The influence of these amendments on the properties of the above liner materials is also studied. The results showed that there is definite improvement in the properties of the liner materials when it is reinforced with discrete random fibres. The study also proved that the desiccation cracks could be controlled with the help of fibre reinforcement.