两种银莲花属植物的化学成分研究

本学位论文由5 章组成。第1 章报道了两头尖中三萜皂苷类化合物的全扫描电喷雾多级质谱分析及银莲花素A 的电喷雾质谱裂解规律；第2 和3 章报道了两种银莲花属药用植物化学成分的研究结果；第4 章报道了银莲花素A 的化学结构修饰及其对一种蛋白酪氨酸磷酸酯酶（PTP-1B）的抑制活性；第5 章综述了电喷雾质谱在皂苷类化合物结构鉴定中的应用进展。 第1 章报道了运用全扫描电喷雾多级质谱对两头尖中三萜皂苷类化合物的快速定性检测，共检测出18 个准分子离子峰，根据多级质谱数据并结合文献报道，对其中的15 个准分子离子峰进行了归属，并区分了一些同分异构体；更有意思的是，发现了3 个未见文献报道的三萜皂苷类化合物。根据它们的多级质谱数据，对其结构分别进行了初步解析。本章同时对银莲花素A 特殊的质谱裂解途径通过衍生物制备及其质谱分析进行了确认。 第2 和3 章，分别报道了两头尖和打破碗花花中水溶性多糖苷的分离纯化和结构鉴定。采用D101 大孔树脂和反复硅胶柱层析等分离手段，从两头尖水溶性部分分离得到8 个三萜皂苷类化合物，通过红外、电喷雾质谱和核磁共振等现代谱学方法，并结合传统的化学手段鉴定了它们的结构，其中4 个化合物为新化合物，分别命名为多被银莲花皂苷19、多被银莲花皂苷20、多被银莲花皂苷21和多被银莲花皂苷22。从打破碗花花水溶性部位分离得到6 个三萜皂苷类化合物，通过现代谱学手段，并结合传统的化学方法对它们进行了鉴定，其中1 个为新化合物，命名为打破碗花花苷H。 第4 章报道了以银莲花素A 及其同系物为先导化合物，进行化学结构修饰并对修饰产物进行广泛的生物活性筛选，发现在银莲花素A 及其同系物的结构中引入一些酸性基团后，其生物活性发生了变化，一些修饰产物显示出很强的PTP-1B 抑制作用，提示这些化合物有可能用于治疗II 型糖尿病。 第5 章综述了电喷雾多级质谱用于皂苷类化合物结构鉴定的研究进展。 This dissertation composes of five chapters. The first chapter elaborates the detection and qualification of the triterpenoidal saponins in Anemone raddeana by positive and negative full scan ESI-MSn. This part also reports the special fragmentation pathway of Raddeanin A by ESI-MS/MS. The second and third chapters present the phytochemical investigation of two medicinal plants from Anemone. The fourth part dwells on the structure modification of Raddeanin A and their inhibitory activity against PTP-1B. The last part is a review on the progress in the application of ESI-MSn in the structure identification of saponins. The first chapter reports the application of full scan ESI-MSn for fast analysis of triterpenoid saponins in Anemone raddeana. Eighteen quasi- molecular ion peaks were detected in the positive full scan ESI-MS and fifteen of them were identified by analysis of their tandem mass spectral data in the negative ion mode. Several isomers were differentiated. More interesting, three unreported triterpenoid saponins in this medicinal plant were detected and their structures were deduced according to the dissociation pathway of the known triterpenoidal saponins. This chapter also confirms the special fragmentation pathway of Raddeanin A by its derivative and the mass spectral analysis. The second and third chapters expatiate on the isolation and identification of the chemical constituents from A. raddeana and A. hupehensis. Eight compounds were isolated from the roots and stems of A. raddeana by methanol extraction and repeated column chromatography (including D101 and silica gel), and their structures were determined on the basis of IR, ESI-MS, NMR and chemical methods (including acid hydrolysis and alkaline saponification). Among them, four are new triterpenoid saponins and named as Raddeanoside R19, Raddeanoside R20, Raddeanoside R21 and Raddeanoside R22. Six compounds were isolated from the whole plants of A. hupehensis by the same methods as above, and their structures were also determined with the same way. One of them was confirmed to be new triterpenoid saponins and named as hupehensis saponin H. In the fourth chapter, in order to look for new active compounds, the structure of Raddeanin A and its analogs were modified. It was found that the modified products exhibited obvious inhibitory activity against PTP-1B when several acid groups were introduced. The fifth chapter summarizes the progress on the application of ESI-MSn in the structure identification of saponins.

原子吸收光谱法测定膜荚黄芪不同器官矿质元素含量

应用混合酸HNO3-HClO4(4∶1)在常压微沸条件下对膜荚黄芪根系及茎叶样品进行消解,采用原子吸收光谱法测定了膜荚黄芪不同器官即根及茎叶中五种人体必需矿质元素K,Fe,Zn,Mn和Cu含量,并对结果进行了统计分析与比较。该方法标准曲线相关系数为0.997 3~0.999 9,加标回收率为92.88%~109.25%,相对标准偏差(RSD,n=5)为0.393 5%~3.175 2%。方法简单,结果可靠。结果显示,膜荚黄芪根及茎叶中5种矿质元素含量顺序均为K>Fe>Zn>Mn>Cu。膜荚黄芪不同器官矿质元素含量不同,根中富含Fe,Zn,Cu元素,根内Fe含量是茎叶的1.54倍。茎叶中也含有丰富的矿质元素,特别是K和Mn元素。茎叶中K含量是根的1.63倍,这与黄芪的药效相符合。试验结果将为研究矿质元素在黄芪植株中的分布以及矿质元素含量与黄芪药效相关性提供理论依据。

Reversed micellar solubilization extraction and separation of thorium(IV) from rare earth(III) by primary amine N1923 in ionic liquid

The extraction behavior of thorium(IV) sulfate by primary amine N1923 in imidazolium-based ionic liquid (IL) namely 1-octyl-3-methylimidazolium hexafluorophosphate ([C(8)mim]PF6) was systematically studied in this paper. Results showed that the extraction behavior was quite different from that using conventional solvent as diluent. A reversed micellar solubilization extraction mechanism was proposed for the extraction of thorium(IV) by N1923/[C(8)mim]PF6 via slope analysis method and polarized optical microscopy (POM)/transmission electron microscopy (TEM) observation. The salt-out agent, Na2SO4, was demonstrated to prompt this extraction mechanism.

Extraction and recovery of cerium(IV) along with fluorine(I) from bastnasite leaching liquor by DEHEHP in [C(8)mim]PF6

BACKGROUND: Ionic liquids (ILs) as environmentally benign solvents have been widely studied in the application of solvent extraction. However, few applications have been successfully industrialized because of the difficult stripping of metal ions or the loss of components of the ILs. More work needs to be done to investigate the extraction behaviour of IL-based extraction systems. In this work, the extraction behaviour of Ce(IV), Th(IV) and some trivalent rare earth (RE) nitrates by di(2-ethylhexyl) 2-ethylhexylphosphonate (DEHEHP) in the IL, 1-methyl-3-octylimidazolium hexafluorophosphate ([C(8)mim]PF6), was investigated and compared with that in the n-heptane system. In particular, the effect of F(I) on the extraction mechanism for Ce(IV) and its separation from Th(IV) was investigated. Otherwise, the recovery efficiency of Ce(IV) and F(I) from a practical bastnasite leach liquor was examined using IL based extraction.

Extraction kinetics of Sc(III), Y(III), La(III) and Gd(III) from chloride medium by Cyanex 302 in heptane using the constant interfacial cell with laminar flow

The extraction kinetics of Sc, Y, La and Gd(III) from the hydrochloric acid medium using Cyanex 302 (hereafter HL) in heptane solution have been measured by the constant interfacial cell with laminar flow. Reaction regions are explored at liquid-liquid interface. Extraction regimes are deduced to be diffusion-controlled for Sc(Ill) and mixed controlled for Y, La and Gd(Ill). Extraction mechanisms are discussed according to the dimeric model of Cyanex 302 in non-polar solution. From the temperature dependence of rate measurement, the values of E-a, Delta H-+/-, Delta S-+/- and Delta G(300)(+/-) are calculated and it is found that the absolute values of these parameters keep crescent trend for Sc, Y, La and Gd(III). At the same time, it is found that it can easily achieve the mutual separation among the Sc, Y and La(III) with kinetics extraction methods.

Effects R3+ on the photoluminescent properties of Ca2R8(SiO4)(6)O-2 : A (R = Y, La, Gd; A= Eu3+, Tb3+) phosphor films prepared by the sol-gel process

Using CaCO3, metal oxides (all dissolved by nitric acid) and tetraethoxysilane Si(OC2H5)(4) (TEOS) as the main starting materials, Ca2R8(SiO4)(6)O-2:A (R = Y, La, Gd; A = EU3+, Tb3+) phosphor films have been dip-coated on quartz glass substrates through the sol-gel process. X-ray diffraction (XRD), atomic force microscope (AFM), scanning electron microscope (SEM) and photoluminescence (PL) spectra as well as lifetimes were used to characterize the resulting films. The results of XRD indicated that the 1000 degreesC annealed films are isomorphous and crystallize with the silicate oxyapatite structure. AFM and SEM studies revealed that the phosphor films consisted of homogeneous particles ranging from 30 to 90 nm, with an average thickness of 1.30 mum. The Eu3+ and Tb3+ show similar spectral properties independent of R 3, in the films due to their isomorphous crystal structures. However, both the emission intensity and lifetimes of Eu3+ and Tb3+ in Ca2R8(SiO4)(6)O-2 (R = Y, La, Gd) films decrease in the sequence of R = Gd > R = Y > R = La, which have been explained in accordance with the crystal structures.

Interfacial behavior of DEHEHP and the kinetics of cerium(IV) extraction in nitrate media

The effects of diluents, temperature, acidity, and ionic strength of the aqueous phase on the interfacial properties of DEHEHP have been extensively investigated using the Du Nouy ring method. In addition, the effect of cerium(IV) concentration loaded in the organic phase on the interfacial tension has also been studied. With the increase of DEHEHP concentration, the value of interfacial tension (gamma) decreases in the studied system, which shows that DEHEHP has interfacial activity as a kind of surfactant. The surface excess at the saturated interface (Gamma(max)) and the minimum bulk concentration of the extractant necessary to saturate the interface (C-min) under the different conditions are calculated according to two adsorption equations such as the Gibbs and Szyszkowski functions to be presented in comprehensive tables and figures. The relationship between the interfacial activity of DEHEHP and cerium(IV) extraction kinetics by DEHEHP has been discussed by considering different factors such as the effects of diluents and temperature. However, the interfacial activity parameter of extractant only is a qualitative parameter, but cannot provide strong enough evidence to quantitatively explain the relationship between extraction kinetics and interfacial properties of an extractant.

A new hydrometallurgical process for extracting rare earths from apatite using solvent extraction with P-350

In this paper, a new process is proposed to recover rare earths from nitric acid leaching of apatite without interfering with the normal route for fertilizer production using solvent extraction with dimethyl heptyl methyl phosphonate CH3P(O)(OC8H17)(2) (P-350, B). In the present work, the leaching conditions are studied. In selected condition, apatite was dissolved in 20% (v/v) nitric acid solution at 60-70 degrees C while agitating. The most suitable acidity for extraction is 0.4 M HNO3. More than 98% of rare earths in apatite can be recovered using countercurrent extraction process with six stages when phase ratio = 0.5, and defluorination is unnecessary. The influences of phase ratio, stage number, acidity and salting-out agent on extractabilities Of P-350 are studied. The results show that rare earths can be separated with P-350 from Ca, P, Fe and other impurities. Mixed rare earth oxides (REO) of which purity is more than 95% with yield over 98% can be obtained.

Synergistic extraction of rare earths(III) from chloride medium with mixtures of 1-phenyl-3-methyl-4-benzoyl-pyrazalone-5 and di-(2-ethylhexyl)-2-ethylhexylphosphonate

The synergistic effect of 1-phenyl-3-methyl-4-benzoyl-pyrazalone-5 (HPMBP, HA) and di-(2ethylhexyl)-2-ethylhexylphosphonate (DEHEHP, B) in the extraction of rare earths (RE) from chloride solutions has been investigated. Under the experimental conditions used, there was no detectable extraction when DEHEHP was used as a single extractant while the amount of RE(III) extracted by HPMBP alone was also low. But mixtures of the two extractants at a certain ratio had very high extractability for all the RE (III). For example, the synergistic enhancement coefficient was calculated to be 9.35 for Y3+, and taking Yb3+ and Y3+ as examples, RE3+ is extracted as RE(OH)A(2).B. The stoichiometry, extraction constants and thermodynamic functions such as Gibbs free energy change Delta G (-17.06kJmol(-1)), enthalpy change Delta H (-35.08kjmol(-1)) and entropy change Delta S (-60.47JK(-1)mol(-1)) for Y3+ at 298 K were determined. The separation factors (SF) for adjacent pairs of rare earths were calculated. Studies show that the binary extraction system not only enhances the extraction efficiency of RE(III) but also improves the selectivity, especially between La(III) and the other rare earth elements.

Kinetics of cerium(IV) extraction with DEHEHP from HNO3-HF medium using a constant interfacial cell with laminar flow

Studies of the extraction kinetics of cerium(IV) into n-heptane solutions of di(2-ethylhexyl)-2-ethylhexyl phosphonate DEHEHP from HNO3-HF solutions have been carried out using a constant interfacial cell with laminar flow. The experimental hydrodynamic conditions were chosen so that the contribution of diffusion to the measured rate of reaction was minimized. The data were analyzed in terms of pseudo-first order constants. The effects of the stirring rate, specific interfacial area, and temperature on the extraction rate showed that the most probable reaction zone is in the aqueous homogeneous phase. The results were compared with those of the system without HF. It was concluded that the presence of HF decreases the extraction rate of cerium. The addition of HF increases the activation energy for the forward reaction from 21.2 to 55.3 kJ/mol and for the reverse process from 57.9 to 79.0 kJ/mol. According to the experimental data correlated as a function of the concentration of the relevant species involved in the extraction reaction, the corresponding rate equation was deduced as follows:-d[Ce]/dt = k[Ce] center dot B-0.62 center dot HF-0.58 center dot [NO3-](0.57)

Coating carbon nanotubes with europium oxide

Carbon nanotubes (CNTS) coating with europium oxide by a simple method is reported in this letter for the first time. The CNTS were refluxed in a solution of nitric acid containing europium nitrate, and the pH value was subsequently ajusted with ammonia solution. At last, the mixture was filtered and annealed. The TEM micrograph showed that the CNTS were covered with a uniform thin layer with thickness of about 15 nm. The XRD results revealed that the CNTS were coated with europium oxide.

Determination of mercury with a flow injection quartz tube atomic absorption spectrometry

A method was developed for the determination of micro mercury in the soil, plants and the traditional Chinese medicine using flow injection quartz tube-atomic absorption spectrometry. The effect of the factors such as acidity,. the carrier solution, the flow rate of reductive solution and argon gas, etc. on the determination was studied. When vanadic oxide, nitric acid and sulfuric acid were used to decompose the sample reliable result could be obtained. The characteristic mass of the method is 59 pg, the detection limit is 0.028 mug/L, RSD is < 3.9% and the recovery is in the range of 94% &SIM; 102%.

Three-phase extraction study of Cyanex 923-n-heptane/Ce4+-H2SO4 system

Phase behavior of the extraction system, Cyanex 923-heptane/Ce4+-H2SO4 has been studied and compared with Cyanex 923-heptane/H2SO4 System. Cerium(IV) is mainly extracted into the third phase, and its concentration in the third phase first increases with the increasing aqueous acid concentration, reaches maximum and then decreases. At higher acidity, cerium(IV) is hardly extracted in the third phase. The phase behavior and change of the contents of acid and water are similar to those in the acid system. The acid concentration increases with increase of the aqueous acid in the whole extraction region while the water content first decreases with it and then increases after the third phase formation. The third phase has a characteristic lamellar structure formed by the aggregates of Cyanex 923 (.) (H2SO4)(2) (.) H2O as those in the case of acid system. The third phase loaded Ce(IV) has been used to prepare ultrafine CeO2 powder conveniently by precipitation with oxalic acid, and powders with size mostly smaller than 100 nm can be obtained.

Chlorohydrin water swellable rubber compatibilized by an amphiphilic craft copolymer. I. Synthesis and characterization of compatibilizer PVA-g-PBA

The graft copolymerization of butyl acrylate onto poly(vinyl alcohol) with eerie ammonium nitrate as redox initiator in a aqueous medium has been investigated. The formation of graft copolymer was confirmed by means of IR, scanning electron microscopy (SEM), and wide-angle X-ray diffraction (WAXD). The percentage of mononer conversion and percentage of grafting varied with concentrations of initiator, nitric acid, monomer, macromolecular backbone (X-n = 1750, M = 80 000), reaction temperature and reaction time. Some inorganic salts and organic solvents have a great influence upon grafting. The reaction mechanism has been explored, and rate equations for the reaction are established. (C) 2000 John Wiley & Sons, Inc.

Preparation and properties of nanocrystalline Yb2O3

Nanocrystalline Yb2O3 of various particle sizes was prepared using sol-gel method. XRD analysis shows that the prepared nanocrystalline Yb2O3 is cubic in structure with space group Ia3. TEM photographs indicate that Yb2O3 nanoparticles are basically spherical in shape. Calculation of crystallite size indicates that the average crystallite size of Yb2O3 increases with increasing calcination temperature, but the average crystal lattice distortion rate decreases with increasing calcination temperature and crystallite size. This result shows that the smaller the crystallite size, the bigger the crystal lattice distortion, and the worse crystal growth. Solubility test of Yb2O3 in nitric acid shows that the surface activity of Yb2O3 increases with decreasing crystallite size. Fourier Transform Infrared Spectrometer (FTIR) spectra reveal that nanocrystalline Yb2O3 has higher surface activity; than that of ordinary Yb2O3. Absorbance intensity of Yb-O bond of nanocrystalline Yb2O3 is weaker than that of ordinary Yb2O3, and the absorbance of Yb-O bond of nanocrystalline Yb2O3 is small blue-shifted.