315 resultados para descriptor


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Subjects read and recalled a series of five short stories in one of four plot and style combinations. The stories were written in one of two styles that consisted of opposing clause orders (i.e., independent-dependent vs. dependent-independent), tense forms (i.e., past vs. present), and descriptor forms (modifier modifier vs. modifier as a noun). The subjects incorporated both plot and style characteristics into their recalls. Other subjects, who, after five recalls, either generated a new story or listed the rules that had been followed by the stories read, included the marked forms of the characteristics they learned more often, except for tense. The subjects read and recalled four stories of the same plot and style and then read and recalled a fifth story of the same plot and style or of one of the other three plot/style combinations. Ability to switch style depended on both the characteristic and the markedness.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A video annotation system includes clips organization, feature description and pattern determination. This paper aims to present a system for basketball zone-defence detection. Particularly, a character-angle based descriptor for feature description is proposed. The well-performed experimental results in basketball zone-defence detection demonstrate that it is robust for both simulations and real-life cases, with less sensitivity to the distribution caused by local translation of subprime defenders. Such a framework can be easily applied to other team-work sports.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The degree of development and operability of the indicators for the Marine Strategy Framework Directive (MSFD) using Descriptor 1 (D1) Biological Diversity was assessed. To this end, an overview of the relevance and degree of operability of the underlying parameters across 20 European countries was compiled by analysing national directives, legislation, regulations, and publicly available reports. Marked differences were found between countries in the degree of ecological relevance as well as in the degree of implementation and operability of the parameters chosen to indicate biological diversity. The best scoring EU countries were France, Germany, Greece and Spain, while the worst scoring countries were Italy and Slovenia. No country achieved maximum scores for the implementation of MSFD D1. The non-EU countries Norway and Turkey score as highly as the top-scoring EU countries. On the positive side, the chosen parameters for D1 indicators were generally identified as being an ecologically relevant reflection of Biological Diversity. On the negative side however, less than half of the chosen parameters are currently operational. It appears that at a pan-European level, no consistent and harmonized approach currently exists for the description and assessment of marine biological diversity. The implementation of the MSFD Descriptor 1 for Europe as a whole can therefore at best be marked as moderately successful.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Morphometric study of modern ice masses is useful because many reconstructions of glaciers traditionally draw on their shape for guidance Here we analyse data derived from the surface profiles of 200 modern ice masses-valley glaciers icefields ice caps and ice sheets with length scales from 10º to 10³ km-from different parts of the world Four profile attributes are investigated relief span and two parameters C* and C that result from using Nye s (1952) theoretical parabola as a profile descriptor C* and C respectively measure each profile s aspect ratio and steepness and are found to decrease in size and variability with span This dependence quantifies the competing influences of unconstrained spreading behaviour of ice flow and bed topography on the profile shape of ice masses which becomes more parabolic as span Increases (with C* and C tending to low values of 2.5-3.3 m ½) The same data reveal coherent minimum bounds in C* and C for modern ice masses that we develop into two new methods of palaeo glacier reconstruction In the first method glacial limits are known from moraines and the bounds are used to constrain the lowest palaeo ice surface consistent with modern profiles We give an example of applying this method over a three-dimensional glacial landscape in Kamchatka In the second method we test the plausibility of existing reconstructions by comparing their C* and C against the modern minimum bounds Of the 86 published palaeo ice masses that we put to this test 88% are found to be plausible The search for other morphometric constraints will help us formalise glacier reconstructions and reduce their uncertainty and subjectiveness

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Burkholderia species RASC and Pseudomonas fluorescens were marked with lux genes, encoding for bioluminescence and used to assess the toxicity of mono-, di- and tri-chlorophenols by determining the decline in bioluminescence following exposure to the compounds in aqueous solution. Toxicity was expressed as a 50% effective concentration value (EC50, equating to the concentration of compound which caused a 50% decline in bioluminescence. Comparing the toxicity values of the compounds showed that, in general, increasing the degree of chlorination, increased toxicity. By carrying out forward multiple linear regressions with log10 EC50 values and physio-chemical descriptors, it was shown that molecular parameters describing the hydrogen bonding nature of a chlorophenol provided a better fit than regressions between toxicity data and log10 Kow alone. Utilising these descriptor variables in equations, it was shown that the toxicity of chlorophenols to the lux marked bacteria could be predicted from the compounds physio-chemical characteristics. By correlating lux marked RASC c2 and P. fluorescens EC50 values with toxicity values using Pimephales promelas (fathead minnow), Tetrahymena pyriformis (ciliate) and marine bacterium Vibriofischeri, it was apparent that lux marked RASC c2 correlated well with the freshwater aquatic species (P. promelas and T. pyriformis). This implied that for predictions of toxicity of organic xenobiotic compounds to higher organisms, lux marked RASC c2 could be utilised as a rapid surrogate.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Marine Strategy Framework Directive (MSFD) requires that European Union Member States achieve "Good Environmental Status" (GES) in respect of 11 Descriptors of the marine environment by 2020. Of those, Descriptor 4, which focuses on marine food webs, is perhaps the most challenging to implement since the identification of simple indicators able to assess the health of highly dynamic and complex interactions is difficult. Here, we present the proposed food web criteria/indicators and analyse their theoretical background and applicability in order to highlight both the current knowledge gaps and the difficulties associated with the assessment of GES. We conclude that the existing suite of indicators gives variable focus to the three important food web properties: structure, functioning and dynamics, and more emphasis should be given to the latter two and the general principles that relate these three properties. The development of food web indicators should be directed towards more integrative and process-based indicators with an emphasis on their responsiveness to multiple anthropogenic pressures. (C) 2013 Elsevier Ltd. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objectives: This study aims to determine pain frequency amongst care home residents with dementia, to investigate variables associated with pain, to explore analgesic use among residents and to seek residents' relatives' views on provision of care and management of pain by the care home. Methods: Structured face-to-face interviews were conducted with residents, nursing staff and relatives from nine dementia care homes in Northern Ireland, between May 2010 and March 2012. Demographic information was collected from participants, neuropsychiatric tests were used to assess residents' cognitive functioning, medication use was determined from care home records and residents' pain was assessed using a verbal descriptor scale. Relatives' views were sought on care provision and management of pain. Results: Forty-two residents, 16 nurses/care assistants and 35 relatives participated; the participation rate of residents was low (27.6%). Most residents were suffering moderate-severe dementia, and some residents (26.2%) were unable to provide a self-report of pain. A significantly higher proportion of relatives (57.1%) deemed residents to be experiencing pain at the time of the interview, compared with residents (23.8%, p = 0.005) and nurses/care assistants (42.9%, p = 0.035). Most residents (88.1%) were prescribed with analgesia; non-opioid analgesics were most commonly prescribed. High proportions of residents were prescribed with psychoactive medications. Antipsychotic drug use was associated with presence of pain (p = 0.046). Conclusions: This study has reinforced the challenge of assessing and managing pain in this resident population and highlighted issues to be addressed by long-term care providers and clinicians. Participation of people with dementia, and their families, in healthcare research needs to be improved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Few pain studies have made community-dwelling people with dementia (PWD) their focus. The aim of this study was to determine the prevalence of pain among this patient population and to explore medication use. Moreover, we sought to investigate patient and caregiver variables associated with the presence of pain. Community-dwelling PWD and their caregivers were recruited between May 2009 and July 2012 from outpatient memory clinics in Northern Ireland to take part in a face-to-face structured interview with a researcher. Patients' cognitive status and presence of depression were established. A full medication history was taken. Both patients and caregivers were asked to rate patients' pain, at the time of the interview and on an average day, using a 7-point verbal descriptor scale. From the 206 patients who were eligible to take part, 75 patient-caregiver dyads participated in the study (participation rate = 36.4%). The majority of patients (92.0%) had dementia classed as mild or moderate. Pain was commonly reported among the sample, with 57.3% of patients and 70.7% of caregivers reporting patient pain on an average day. Significant differences were found between patients' and caregivers' reports of pain. Two-fifths of patients (40.0%) were prescribed analgesia. Antipsychotic, hypnotic and anxiolytic drug use was low, whereas antidepressant drugs were prescribed more commonly. Presence of pain was unaffected by dementia severity; however, the use of prescribed analgesic medication was a significant predictor of the presence of pain in these patients, whether reported by the patient or their caregiver 'right now' or 'on an average day' (P < 0.001). Patient and caregiver recruitment was challenging, and remains a barrier to research in this area in the future.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Shoeprint evidence collected from crime scenes can play an important role in forensic investigations. Usually, the analysis of shoeprints is carried out manually and is based on human expertise and knowledge. As well as being error prone, such a manual process can also be time consuming; thus affecting the usability and suitability of shoeprint evidence in a court of law. Thus, an automatic system for classification and retrieval of shoeprints has the potential to be a valuable tool. This paper presents a solution for the automatic retrieval of shoeprints which is considerably more robust than existing solutions in the presence of geometric distortions such as scale, rotation and scale distortions. It addresses the issue of classifying partial shoeprints in the presence of rotation, scale and noise distortions and relies on the use of two local point-of-interest detectors whose matching scores are combined. In this work, multiscale Harris and Hessian detectors are used to select corners and blob-like structures in a scale-space representation for scale invariance, while Scale Invariant Feature Transform (SIFT) descriptor is employed to achieve rotation invariance. The proposed technique is based on combining the matching scores of the two detectors at the score level. Our evaluation has shown that it outperforms both detectors in most of our extended experiments when retrieving partial shoeprints with geometric distortions, and is clearly better than similar work published in the literature. We also demonstrate improved performance in the face of wear and tear. As matter of fact, whilst the proposed work outperforms similar algorithms in the literature, it is shown that achieving good retrieval performance is not constrained by acquiring a full print from a scene of crime as a partial print can still be used to attain comparable retrieval results to those of using the full print. This gives crime investigators more flexibility is choosing the parts of a print to search for in a database of footwear.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study examines the firm size distribution of US banks and credit unions. A truncated lognormal distribution describes the size distribution, measured using assets data, of a large population of small, community-based commercial banks. The size distribution of a smaller but increasingly dominant cohort of large banks, which operate a high-volume low-cost retail banking model, exhibits power-law behaviour. There is a progressive increase in skewness over time, and Zipf’s Law is rejected as a descriptor of the size distribution in the upper tail. By contrast, the asset size distribution of the population of credit unions conforms closely to the lognormal distribution.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Heterogeneous catalysis is of great importance both industrially and academically. Rational design of heterogeneous catalysts is highly desirable, and the computational screening and design method is one of the most promising approaches for rational design of heterogeneous catalysts. Herein, we review some attempts towards the rational catalyst design using density functional theory from our group. Some general relationships and theories on the activity and selectivity are covered, such as the Brønsted–Evans–Polanyi relation, volcano curves/surfaces, chemical potentials, optimal adsorption energy window and energy descriptor of selectivity. Furthermore, the relations of these relationships and theories to the rational design are discussed, and some examples of computational screening and design method are given.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In forensic investigations, it is common for forensic investigators to obtain a photograph of evidence left at the scene of crimes to aid them catch the culprit(s). Although, fingerprints are the most popular evidence that can be used, scene of crime officers claim that more than 30% of the evidence recovered from crime scenes originate from palms. Usually, palmprints evidence left at crime scenes are partial since very rarely full palmprints are obtained. In particular, partial palmprints do not exhibit a structured shape and often do not contain a reference point that can be used for their alignment to achieve efficient matching. This makes conventional matching methods based on alignment and minutiae pairing, as used in fingerprint recognition, to fail in partial palmprint recognition problems. In this paper a new partial-to-full palmprint recognition based on invariant minutiae descriptors is proposed where the partial palmprint’s minutiae are extracted and considered as the distinctive and discriminating features for each palmprint image. This is achieved by assigning to each minutiae a feature descriptor formed using the values of all the orientation histograms of the minutiae at hand. This allows for the descriptors to be rotation invariant and as such do not require any image alignment at the matching stage. The results obtained show that the proposed technique yields a recognition rate of 99.2%. The solution does give a high confidence to the judicial jury in their deliberations and decision.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dissertação de Mestrado, Gestão da Água e da Costa, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2010

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Ultrasonic, infrared, laser and other sensors are being applied in robotics. Although combinations of these have allowed robots to navigate, they are only suited for specific scenarios, depending on their limitations. Recent advances in computer vision are turning cameras into useful low-cost sensors that can operate in most types of environments. Cameras enable robots to detect obstacles, recognize objects, obtain visual odometry, detect and recognize people and gestures, among other possibilities. In this paper we present a completely biologically inspired vision system for robot navigation. It comprises stereo vision for obstacle detection, and object recognition for landmark-based navigation. We employ a novel keypoint descriptor which codes responses of cortical complex cells. We also present a biologically inspired saliency component, based on disparity and colour.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

La mise en registre 3D (opération parfois appelée alignement) est un processus de transformation d’ensembles de données 3D dans un même système de coordonnées afin d’en aligner les éléments communs. Deux ensembles de données alignés ensemble peuvent être les scans partiels des deux vues différentes d’un même objet. Ils peuvent aussi être deux modèles complets, générés à des moments différents, d’un même objet ou de deux objets distincts. En fonction des ensembles de données à traiter, les méthodes d’alignement sont classées en mise en registre rigide ou non-rigide. Dans le cas de la mise en registre rigide, les données sont généralement acquises à partir d’objets rigides. Le processus de mise en registre peut être accompli en trouvant une seule transformation rigide globale (rotation, translation) pour aligner l’ensemble de données source avec l’ensemble de données cible. Toutefois, dans le cas non-rigide, où les données sont acquises à partir d’objets déformables, le processus de mise en registre est plus difficile parce qu’il est important de trouver à la fois une transformation globale et des déformations locales. Dans cette thèse, trois méthodes sont proposées pour résoudre le problème de mise en registre non-rigide entre deux ensembles de données (représentées par des maillages triangulaires) acquises à partir d’objets déformables. La première méthode permet de mettre en registre deux surfaces se chevauchant partiellement. La méthode surmonte les limitations des méthodes antérieures pour trouver une grande déformation globale entre deux surfaces. Cependant, cette méthode est limitée aux petites déformations locales sur la surface afin de valider le descripteur utilisé. La seconde méthode est s’appuie sur le cadre de la première et est appliquée à des données pour lesquelles la déformation entre les deux surfaces est composée à la fois d’une grande déformation globale et de petites déformations locales. La troisième méthode, qui se base sur les deux autres méthodes, est proposée pour la mise en registre d’ensembles de données qui sont plus complexes. Bien que la qualité que elle fournit n’est pas aussi bonne que la seconde méthode, son temps de calcul est accéléré d’environ quatre fois parce que le nombre de paramètres optimisés est réduit de moitié. L’efficacité des trois méthodes repose sur des stratégies via lesquelles les correspondances sont déterminées correctement et le modèle de déformation est exploité judicieusement. Ces méthodes sont mises en oeuvre et comparées avec d’autres méthodes sur diverses données afin d’évaluer leur robustesse pour résoudre le problème de mise en registre non-rigide. Les méthodes proposées sont des solutions prometteuses qui peuvent être appliquées dans des applications telles que la mise en registre non-rigide de vues multiples, la reconstruction 3D dynamique, l’animation 3D ou la recherche de modèles 3D dans des banques de données.