Experiences with control of evaporators using extensive vapour bleeding

FOR SUGAR factories with cogeneration plants major changes to the process stations have been undertaken to reduce the consumption of exhaust steam from the turbines and maximise the generated power. In many cases the process steam consumption has been reduced from greater than 52% on cane to ~40% on cane. The main changes have been to install additional evaporation area at the front of the set, operate the pan stages on vapour from No 1 or No 2 effects and undertake juice heating using vapour bleed from evaporators as far down the set as the penultimate stage. Operationally, one of the main challenges has been to develop a control system for the evaporators that addresses the objectives of juice processing rate (throughput) and steam economy, while producing syrup consistently at the required brix and providing an adequate and consistent vapour pressure for the pan stage operations. The cyclic demand for vapour by batch pans causes process disturbances through the evaporator set and these must be regulated in an effective manner to satisfy the above list of objectives for the evaporator station. The impact of the cyclic pan stage vapour demand has been modelled to define the impact on juice rate, steam economy, syrup brix and head space pressures in the evaporators. Experiences with the control schemes used at Pioneer and Rocky Point Mills are discussed. For each factory the paper provides information on (a) the control system used, the philosophy behind the control system and experiences in reaching the current system for control (b) the performance of the control system to handle the disturbances imposed by the pan stage and operate within other constraints of the factory (c) deficiencies in the current system and plans for further improvements. Other processing changes to boost the performance of the evaporators are also discussed.

A meshfree particle based model for microscale shrinkage mechanisms of food materials in drying conditions

Cells are the fundamental building block of plant based food materials and many of the food processing born structural changes can fundamentally be derived as a function of the deformations of the cellular structure. In food dehydration the bulk level changes in porosity, density and shrinkage can be better explained using cellular level deformations initiated by the moisture removal from the cellular fluid. A novel approach is used in this research to model the cell fluid with Smoothed Particle Hydrodynamics (SPH) and cell walls with Discrete Element Methods (DEM), that are fundamentally known to be robust in treating complex fluid and solid mechanics. High Performance Computing (HPC) is used for the computations due to its computing advantages. Comparing with the deficiencies of the state of the art drying models, the current model is found to be robust in replicating drying mechanics of plant based food materials in microscale.

Legislative impact on the mortgagee’s exercise of power of sale : the need for rationalisation

Throughout Australia, regulation of the power of sale is highly inconsistent. In response to the uncertain nature of the mortgagee’s duty at common law, many legislatures have intervened. As a result, there has been a proliferation of statutory formula conferring varying degrees of protection on mortgagors. The differences in approach indicate a lack of consensus as to the best method of regulation. This article exposes the extent of the inconsistency and provides a comparative assessment of the various provisions with reference to the policy concerns that underpin legislative intervention. The article identifies a number of deficiencies associated with existing provisions and concludes that mortgagees and mortgagors alike would benefit from improved clarity and consistency. To that end, the article proposes a model provision that seeks to address the deficiencies identified.

Absent interiors

Anuradha Mathur and Dilip da Cunha theorise in their work on cities and flooding that it is not the floodwaters that threaten lives and homes, the real cause of danger in natural disaster is the fixity of modern civilisation. Their work traces the fluidity of the boundaries between 'dry' and 'wet' land challenging the deficiencies of traditional cartography in representing the extents of bodies of water. Mathur and da Cunha propose a process of unthinking to address the redevelopment of communities in the aftermath of natural disaster. By documenting the path of floodwaters in non-Euclidean space they propose a more appropriate response to flooding. This research focuses on the documentation of flooding in the interior of dwellings, which is an extreme condition of damage by external conditions in an environment designed to protect from these very elements. Because the floodwaters don't discriminate between the interior and the exterior, they move between structures with disregard for the systems of space we have in place. With the rapid clean up that follows flood damage, little material evidence is left for post mortem examination. This is especially the case for the flood damaged interior, piles of materials susceptible to the elements, furniture, joinery and personal objects line curbsides awaiting disposal. There is a missed opportunity in examining the interior in the after math of flood, in the way that Mathur and Dilip investigate floods and the design of cities, the flooded interior proffers an undersigned interior to study. In the absence of intact flood damaged interior, this research relies on two artists' documentation of the flooded interior. The first case study is the mimetic scenographic interiors of a flood-damaged office exhibited in the Bangkok art gallery by the group _Proxy in 2011. The second case study is Robert Polidori's photographic exhibition in New Orleans, described by Julianna Preston as, 'a series of interiors undetected by satellite imaging or storm radar. More telling, more dramatic, more unnerving, more alarming, they force a disturbance of what is familiar'.

Understanding the quantitative skill base on introductory statistics : a case study from business statistics

Basic mathematical skills are critical to a student’s ability to successfully undertake an introductory statistics course. Yet in business education this vitally important area of mathematics and statistics education is under-researched. The question therefore arises as to what level of mathematical skill a typical business studies student will possess as they enter the tertiary environment, and whether there are any common deficiencies that we can identify with a view to tackling the problem. This paper will focus on a study designed to measure the level of mathematical ability of first year business students. The results provide timely insight into a growing problem faced by many tertiary educators in this field.

Effectiveness of a puppet show on iodine knowledge, attitudes and behaviour of elementary students and the indirect effects on their parents and households in Ho Chi Minh City : a pilot study

Deficiencies in iodine levels have been shown to seriously affect a child’s intellectual development and learning capacity.1 In South-East Asia, iodine deficiency remains a major public health concern. Approximately 30% of the region’s population of 503.6 million have insufficient iodine intake, and only 61% of households have access to iodized salt.1 For this reason, it is necessary to initiate effective, community-based health promotion activities that are targeted toward populations of various ages. A puppet show is one imaginative and entertaining method of health education that has been advocated for use in communicating positive health behaviours to children.2e5 The authors undertook a literature review and found no studies assessing the effectiveness of a puppet show to teach an iodine education programme...

OHS Regulation for a Changing World of Work

This volume assesses the legacy of the Robens Report, the intellectual foundation of modern OHS law and practice in Australia and many other countries, following the Report’s 30th anniversary. The authors confront the challenges facing OHS regulators and stakeholders in a new and different world dominated by service industries and globalisation rather than manufacturing industries and protection. They explore new models of OHS regulation that take account of gaps and deficiencies in the current arrangements. The authors bring international expertise from the United Kingdom, New Zealand and Scandinavia as well as Australia. They focus on the kinds of regulatory strategies, including both OHS law and enforcement policy, that are most likely to produce good OHS outcomes in this changing world of work. Particular topics examined are: The type, mix, content and coverage of OHS standards, Systematic OHS management and the development of organisational capability, Strategies for effective worker participation and representation, Models for achieving small business compliance, Regulatory responses to changes in work organisation, Responsive enforcement and adapted inspection, and Restorative justice.

Rethinking OHS Enforcement

The authors confront the challenges facing OHS regulators and stakeholders in a new and different world dominated by service industries and globalisation rather than manufacturing industries and protection. They explore new models of OHS regulation that take account of gaps and deficiencies in the current arrangements.

OHS inspectors and psychosocial risk factors: Evidence from Australia

Legislation giving prominence to psychosocial risk factors at work has changed the role of government occupational health and safety (OHS) inspectors in many countries. Yet little is known about how inspectorates have responded to these changes. Between 2003 and 2007 an Australian study was undertaken on OHS standards, entailing detailed documentary analysis, interviews with 36 inspectorate managers and 89 inspectors, and observations made when researchers accompanied inspectors on 120 typical workplace visits. Our study found that general duty provisions in OHS legislation clearly incorporated psychosocial hazards and inspectorates had introduced guidance material, pursued campaigns and increased interventions in this area. However, the regulatory framework remained narrow (focused on bullying/harassment, occupational violence and work stress) and workplace visits revealed psychosocial hazards as a marginal area of inspectorate activity. These findings were reinforced in interviews. While aware of psychosocial hazards inspectors often saw the issue as problematic due to limited training, resourcing constraints, deficiencies in regulation and fears of victimisation amongst workers. In order to address these problems a number of changes are required that recognize the distinctiveness of psychosocial hazards including their ‘invisibility’. Notable here are revisions to regulation (both general duty provisions and specific codes), the development of comprehensive guidance and assessment tools to be used by inspectors, greater use of procedural enforcement, and enhanced inspectorate resourcing and training. There is also a need to recognize complex inter-linkages between psychosocial hazards and the industrial relations context.

Statutory occupational health and safety workplace arrangements for the modern labour market

Over the past 20 years there has been a significant refashioning of the labour market within Australia and other industrialised countries. This paper examines the implications of the growth of more flexible work arrangements for mechanisms designed to facilitate worker involvement in occupational health and safety at the workplace—a pivotal feature of post-Robens OHS legislation in Australia. It is argued that the growth of subcontracting, casual and home-based work has undermined both coverage and the effectiveness of these provisions, especially in a context where union membership and influence has also been declining. Looking at international experience, the paper examines a number of ways of remedying these deficiencies.

Antimicrobial stewardship activities : a survey of Queensland hospitals

Objective: In 2011, the Australian Commission on Safety and Quality in Health Care (ACSQHC) recommended that all hospitals in Australia must have an Antimicrobial Stewardship (AMS) program by 2013. Nevertheless, little is known about current AMS activities. This study aimed to determine the AMS activities currently undertaken, and to identify gaps, barriers to implementation and opportunities for improvement in Queensland hospitals. Methods: The AMS activities of 26 facilities from 15 hospital and health services in Queensland were surveyed during June 2012 to address strategies for effective AMS: implementing clinical guidelines, formulary restriction, reviewing antimicrobial prescribing, auditing antimicrobial use and selective reporting of susceptibility results. Results: The response rate was 62%. Nineteen percent had an AMS team (a dedicated multidisciplinary team consisting of a medically trained staff member and a pharmacist). All facilities had access to an electronic version of Therapeutic Guidelines: Antibiotic, with a further 50% developing local guidelines for antimicrobials. One-third of facilities had additional restrictions. Eighty-eight percent had advice for restricted antimicrobials from in-house infectious disease physicians or clinical microbiologists. Antimicrobials were monitored with feedback given to prescribers at point of care by 76% of facilities. Deficiencies reported as barriers to establishing AMS programs included: pharmacy resources, financial support by hospital management, and training and education in antimicrobial use. Conclusions: Several areas for improvement were identified: reviewing antimicrobial prescribing with feedback to the prescriber, auditing, and training and education in antimicrobial use. There also appears to be a lack of resources to support AMS programs in some facilities. What is known about the topic? The ACSQHC has recommended that all hospitals implement an AMS program by 2013 as a requirement of Standard 3 (Preventing and Controlling Healthcare-Associated Infections) of the National Safety and Quality Health Service Standards. The intent of AMS is to ensure appropriate prescribing of antimicrobials as part of the broader systems within a health service organisation to prevent and manage healthcare-associated infections, and improve patient safety and quality of care. This criterion also aligns closely with Standard 4: Medication Safety. Despite this recommendation, little is known about what AMS activities are undertaken in these facilities and what additional resources would be required in order to meet these national standards. What does the paper add? This is the first survey that has been conducted of public hospital and health services in Queensland, a large decentralised state in Australia. This paper describes what AMS activities are currently being undertaken, identifies practice gaps, barriers to implementation and opportunities for improvement in Queensland hospitals. What are the implications for practitioners? Several areas for improvement such as reviewing antimicrobial prescribing with feedback to the prescriber, auditing, and training and education in antimicrobial use have been identified. In addition, there appears to be a lack of resources to support AMS programs in some facilities.

Wellbeing as a process of accrual : beyond subjectivity and beyond the moment

Although the notion of wellbeing is popular in contemporary literature, it is variously interpreted and has no common definition. Such inconsistencies in definition have particular relevance when considering wellbeing programs designed for children. By developing a broader conceptualisation of wellbeing and its key elements, the range of programs and services developed in the name of wellbeing will achieve a more consistent cross-disciplinary focus to ensure that the needs of the individual, including children, can more accurately be addressed. This paper presents a new perspective on conceptualising wellbeing. The authors argue that conceptualising wellbeing as an accrued process has particular relevance for both adults and children. A definition for accrued wellbeing is presented in an attempt to address some of the current deficiencies in existing understandings of an already complicated construct. The potential for the ideas presented when considering wellbeing as a process of accrual may have further application when considered beyond childhood.

Process variability of pollutant build-up on urban road surfaces

Knowledge of the pollutant build-up process is a key requirement for developing stormwater pollution mitigation strategies. In this context, process variability is a concept which needs to be understood in-depth. Analysis of particulate build-up on three road surfaces in an urban catchment confirmed that particles <150µm and >150µm have characteristically different build-up patterns, and these patterns are consistent over different field conditions. Three theoretical build-up patterns were developed based on the size-fractionated particulate build-up patterns, and these patterns explain the variability in particle behavior and the variation in particle-bound pollutant load and composition over the antecedent dry period. Behavioral variability of particles <150µm was found to exert the most significant influence on the build-up process variability. As characterization of process variability is particularly important in stormwater quality modeling, it is recommended that the influence of behavioral variability of particles <150µm on pollutant build-up should be specifically addressed. This would eliminate model deficiencies in the replication of the build-up process and facilitate the accounting of the inherent process uncertainty, and thereby enhance the water quality predictions.

Not learning from the past: Adaptive governance challenges for Australian natural resource management

Australia’s governance arrangements for NRM have evolved considerably over the last thirty years. The impact of changes in governance on NRM planning and delivery requires assessment. We undertake a multi-method program evaluation using adaptive governance principles as an analytical frame and apply this to Queensland to assess the impacts of governance change on NRM planning and governance outcomes. Data to inform our analysis includes: 1) a systematic review of sixteen audits/evaluations of Australian NRM over a fifteen-year period; 2) a review of Queensland’s first generation NRM Plans; and 3) outputs from a Queensland workshop on NRM planning. NRM has progressed from a bottom-up grassroots movement into a collaborative regional NRM model that has been centralised by the Australian Government. We found that while some adaptive governance challenges have been addressed, others remained unresolved. Results show that collaboration and elements of multi-level governance under the regional model were positive moves, but also that NRM arrangements contained structural deficiencies across multiple governance levels in relation to public involvement in decision-making and knowledge production for problem responsiveness. These problems for adaptive governance have been exacerbated since 2008. We conclude that the adaptive governance framework for NRM needs urgent attention so that important environmental management problems can be addressed.

A comparative risk assessment of burden of disease and injury attributable to 67 risk factors and risk factor clusters in 21 regions, 1990–2010: A systematic analysis for the Global Burden of Disease Study 2010

BACKGROUND Quantification of the disease burden caused by different risks informs prevention by providing an account of health loss different to that provided by a disease-by-disease analysis. No complete revision of global disease burden caused by risk factors has been done since a comparative risk assessment in 2000, and no previous analysis has assessed changes in burden attributable to risk factors over time. METHODS We estimated deaths and disability-adjusted life years (DALYs; sum of years lived with disability [YLD] and years of life lost [YLL]) attributable to the independent effects of 67 risk factors and clusters of risk factors for 21 regions in 1990 and 2010. We estimated exposure distributions for each year, region, sex, and age group, and relative risks per unit of exposure by systematically reviewing and synthesising published and unpublished data. We used these estimates, together with estimates of cause-specific deaths and DALYs from the Global Burden of Disease Study 2010, to calculate the burden attributable to each risk factor exposure compared with the theoretical-minimum-risk exposure. We incorporated uncertainty in disease burden, relative risks, and exposures into our estimates of attributable burden. FINDINGS In 2010, the three leading risk factors for global disease burden were high blood pressure (7·0% [95% uncertainty interval 6·2-7·7] of global DALYs), tobacco smoking including second-hand smoke (6·3% [5·5-7·0]), and alcohol use (5·5% [5·0-5·9]). In 1990, the leading risks were childhood underweight (7·9% [6·8-9·4]), household air pollution from solid fuels (HAP; 7·0% [5·6-8·3]), and tobacco smoking including second-hand smoke (6·1% [5·4-6·8]). Dietary risk factors and physical inactivity collectively accounted for 10·0% (95% UI 9·2-10·8) of global DALYs in 2010, with the most prominent dietary risks being diets low in fruits and those high in sodium. Several risks that primarily affect childhood communicable diseases, including unimproved water and sanitation and childhood micronutrient deficiencies, fell in rank between 1990 and 2010, with unimproved water and sanitation accounting for 0·9% (0·4-1·6) of global DALYs in 2010. However, in most of sub-Saharan Africa childhood underweight, HAP, and non-exclusive and discontinued breastfeeding were the leading risks in 2010, while HAP was the leading risk in south Asia. The leading risk factor in Eastern Europe, most of Latin America, and southern sub-Saharan Africa in 2010 was alcohol use; in most of Asia, North Africa and Middle East, and central Europe it was high blood pressure. Despite declines, tobacco smoking including second-hand smoke remained the leading risk in high-income north America and western Europe. High body-mass index has increased globally and it is the leading risk in Australasia and southern Latin America, and also ranks high in other high-income regions, North Africa and Middle East, and Oceania. INTERPRETATION Worldwide, the contribution of different risk factors to disease burden has changed substantially, with a shift away from risks for communicable diseases in children towards those for non-communicable diseases in adults. These changes are related to the ageing population, decreased mortality among children younger than 5 years, changes in cause-of-death composition, and changes in risk factor exposures. New evidence has led to changes in the magnitude of key risks including unimproved water and sanitation, vitamin A and zinc deficiencies, and ambient particulate matter pollution. The extent to which the epidemiological shift has occurred and what the leading risks currently are varies greatly across regions. In much of sub-Saharan Africa, the leading risks are still those associated with poverty and those that affect children.