Influence of constraining and confinement in the molecular mobility of low molecular weight materials

Dissertation presented to obtain a Ph.D. Degree in Chemical Physics

Síntese de sílicas mesoporosas contendo nanopartículas de TiO2 e adsorção de bases quinoidais

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Química e Bioquímica

Dielectric study of triton X100: a glass-forming liquid

Dissertação para obtenção do grau de mestre em Engenharia de Materiais

Polímeros electrocrómicos confinados em sistemas mesoporosos

Esta dissertação teve como principal objectivo a síntese de materiais híbridos constituídos por polímeros electrocrómicos incorporados em sílicas mesoporosas e nanotubos de carbono. Esses materiais foram utilizados na construção de dispositivos electrocrómicos que foram caracterizados por voltametria cíclica e espectroelectroquímica. Foram sintetizados os polímeros poli (3,4-(2-etilhexiloxi)-tiofeno (P1), poli (3,4-(2-etilhexiloxi)-tiofeno-co-(3,4-dimetoxi)-tiofeno (P2), poli (3,4-(etilenodioxi)-tiofeno (P3) e o polímero Poli (3-metil)-tiofeno (P4) de maneira a serem utilizados como modelo. Os polímeros foram caracterizados por 1H-RMN e/ou Infravermelho e análise elementar. Posteriormente foram impressos em eléctrodos de PET-ITO ou vidro-FTO, caracterizados e construídos dispositivos electrocrómicos de acordo com o know-how da empresa Ynvisible®. Os materiais híbridos foram sintetizados utilizando o método ship-in-a-bottle. O material híbrido H3 (PEDOT@MCM-41) foi obtido de maneira análoga ao polímero P3 (PEDOT) utilizando 10 equivalentes de catalisador após optimização. Este material híbrido foi depositado em eléctrodos de vidro-FTO, construídos dispositivos electrocrómicos e caracterizados de maneira a comparar com o polímeros previamente sintetizados. Comparando o desempenho do polímero com o seu respectivo híbrido é possível observar um aumento de eficiência de coloração do material híbrido relativamente ao dispositivo com o polímero livre. Os dispositivos do material H3, na experiência de durabilidade, mantiveram-se funcionais durante 10000 ciclos comparativamente a 2000 ciclos dos dispositivos com PEDOT. Na experiência de SEM do material híbrido H3 foi possível observar uma grande quantidade de polímero formada no exterior do material mesoporoso MCM-41. De maneira a minimizar essa quantidade de polímero foram delineadas algumas estratégias de síntese, uma delas pelo método de sublimação. Esta estratégia originou um material híbrido onde o polímero se situava maioritariamente nos poros da sílica MCM-41, mas não apresenta actividade electrocrómica. Ainda nesta dissertação, e com o objectivo de serem misturados com nanotubos de carbono foi sintetizado o polímero funcionalizado com pireno: poli ((3,4-etilenodioxi)-tiofeno-pireno-co-3,4-(2-etilhexiloxi)-tiofeno), utilizando uma proporção de 1:10 (P6.1) e na proporção 1:6 (P6.2) do monómero EDOT-Pireno em relação ao monómero (3,4-(2-etilhexiolxi)-tiofeno. Os polímeros foram caracterizados por 1H-RMN, UV-Vis e voltametria cíclica.

Micro- and mesoporous structures as drug delivery carriers for salicylic acid

The potential of salicylic acid (SA) encapsulated in porous materials as drug delivery carriers for cancer treatment was studied. Different porous structures, the microporous zeolite NaY, and the mesoporous SBA-15 and MCM-41 were used as hosts for the anti-inflammatory drug. Characterization with different techniques (FTIR, UV/vis, TGA, 1H NMR, and 13C CPMAS NMR) demonstrated the successful loading of SA into the porous hosts. The mesoporous structures showed to be very efficient to encapsulate the SA molecule. The obtained drug delivery systems (DDS) accommodated 0.74 mmol (341 mg/gZEO) in NaY and 1.07 mmol (493 mg/gZEO) to 1.23 mmol (566 mg/gZEO) for SBA-15 and MCM-41, respectively. Interactions between SA molecules and pore structures were identified. A fast and unrestricted liberation of SA at 10 min of the dissolution assay was achieved with 29.3, 46.6, and 50.1 µg/mL of SA from NaY, SBA-15, and MCM-41, respectively, in the in vitro drug release studies (PBS buffer pH 7.4, 37 °C). Kinetic modeling was used to determine the release patterns of the DDS. The porous structures and DDS were evaluated on Hs578T and MDA-MB-468 breast cancer cell lines viability. The porous structures are nontoxic to cancer cells. Cell viability reduction was only observed after the release of SA from MCM- 41 followed by SBA-15 in both breast cancer cell lines.

Transformacion de Productos Regionales mediante procesos catalíticos. Transformation of Regional products by catalytic processes.

En este proyecto se plantea la posibilidad de aumentar el valor agregado de compuestos abundantes en nuestro país (terpenos y glicerol) mediante reacciones de oxidación y transesterificación, reemplazando los procesos homogéneos existentes por procesos heterogéneos eco-compatibles. Para ello se desarrollarán catalizadores heterogéneos del tipo MCM-41 e hidroxidos de doble capa (HDC) que posean la función activa específica para estas reacciones bajo estudio.El limoneno, principal componente del aceite esencial de limón y los alfa- y beta- pinenos, presentes en el aceite de trementina, son materiales base ampliamente disponibles. Su oxifuncionalización catalítica, mediante reacciones de epoxidación u oxidación alilica, permite producir una gran variedad de productos como fragancias, agroquímicos, medicinas, etc. En tanto, se espera un marcado incremento en la disponibilidad de glicerol, subproducto de la producción de biodiesel. Mediante su transesterificación catalítica heterogénea es posible obtener selectivamente monoésteres, los cuales tienen importantes aplicaciones como emulsionantes o agentes de estabilización en la producción de fármacos, cosméticos y alimentos. El diseño y síntesis de los materiales catalíticos mencionados permitirá la obtención de productos químicos finos por métodos limpios con bajo impacto ambiental, atendiendo a los altos niveles de contaminación ambiental generados por los procesos homogéneos tradicionales.

Preparació i caracterització de materials mesoporosos en sistemes tensioactius

Estudi elaborat a partir d’una estada a la Universitat Nacional de Yokohama des de maig fins a mitjans de juny del 2006. S'ha estudiat el comportament fàssic i la preparació de sílica mesoporosa pels nous tensioactius fluorats d'estructura C8F17SO2(C3H7)N(C2H4O)nH (abreujat C8F17(EO)n. El tensioactiu C8F17(EO)n forma micel•les allargades i cristalls líquids en aigua, i per tant pot ser adequat per a la preparació de materials mesoporosos. Sílica mesoestructurada es va preparar pel mètode de precipitació per autoagregació cooperativa. Un estudi sistemàtic es va realitzar, investigant la influència de les concentracions de tensioactiu i precursor (TEOS), l’efecte del pH i de la longitud de cadena de poliòxid d’etilè. Els materials es van caracteritzar per raigs X a angle petit (SAXS), sorció de nitrògen i TEM. Els materials obtinguts presenten diàmetres de por petits i parets de por gruixudes. A més, aquests materials posseeixen altes superfícies específiques, que s’han obtingut emprant concentracions de tensioactiu petites, produint parets de por robustes sense microporositat significativa. La superfície específica es manté durant el procés de calcinació, malgrat un petit encongiment degut a l’entrecreuament de la sílica. Els materials de sílica obtinguts han mostrat ser significativament més robustos que altres materials similars descrits a la bibliografia, com la sílica MCM-41.

Adsorção de CO2 em peneiras moleculares micro e mesoporosas

Microporous molecular sieves of type Y, Beta, ZSM-5, ZSM-12 and ZSM-35, and mesoporous molecular sieves of type MCM-41 and MCM-48, and these sieves modified with triethanolamine and ethylenediamine were obtained and characterized by XRD, FTIR, TGA and nitrogen adsorption. The adsorption tests were performed by the gravimetric method under a stream of CO2 at ambient temperature and pressure. The adsorbents studied showed maximum adsorption capacity of carbon dioxide in the range of 13.1 to 85.5 mg of CO2 per gram of adsorbent.

Catálise básica usando sílica mesoporosa estabilizada por acrilatos encapsulados

The synthesis of new type of silicas, with structures akin to that of MCM-41, containing polyacrylate-encapsulated micelles in their mesopores is reported. Initially, the monomers were inserted in the aqueous micelles of cetyltrimethylammonium cations. MCM-41 was then prepared in this microemulsion. Finally, the polymerization of the acrylates was initiated by UVC radiation. The presence of monomers and polymers in the interior of micelles in aqueous media were characterized by IR spectroscopy and small-angle Xray scattering. The presence of this polymer increased the stability of these new materials in catalytic transesterification.

SÍNTESE E PROPRIEDADES DE SÍLICAS HÍBRIDAS CONTENDO SURFACTANTES CETILTRIALQUILAMÔNIO

This work presents the synthesis of silicas containing cetyltrialkylammoniun surfactants in their mesopores. Initially, the aqueous dispersions of these surfactants were characterized by small-angle X-ray scattering (SAXS). The hybrid silicas obtained from these dispersions were evaluated by X-ray diffractometry (XRD) and nitrogen physisorption. The XRD showed that, increasing the head size, there is a shift of the peak corresponding to the (100) diffraction plane to smaller 2θ angles, which indicates an increase in the silicas porous diameter. The increasing of the silicas porous diameter was confirmed by nitrogen physisorption. The base catalytic properties of these hybrid silicas were evaluated in the transesterification reaction showing that those containing the cations C16Et3+ and C16Pr3+ showed better performance.

α-Pinene oxide and verbenol oxide isomerizations over heterogeneous catalysts

Terpenes are a valuable natural resource for the production of fine chemicals. Turpentine, obtained from biomass and also as a side product of softwood industry, is rich in monoterpenes such as α-pinene and β-pinene, which are widely used as raw materials in the synthesis of flavors, fragrances and pharmaceutical compounds. The rearrangement of their epoxides has been thoroughly studied in recent years, as a method to obtain compounds which are further used in the fine chemical industry. The industrially most desired products of α-pinene oxide isomerization are campholenic aldehyde and trans-carveol. Campholenic aldehyde is an intermediate for the manufacture of sandalwood-like fragrances such as santalol. Trans-carveol is an expensive constituent of the Valencia orange essence oil used in perfume bases and food flavor composition. Furthermore it has been found to exhibit chemoprevention of mammary carcinogenesis. A wide range of iron and ceria supported catalysts were prepared, characterized and tested for α-pinene oxide isomerization in order to selective synthesis of above mentioned products. The highest catalytic activity in the preparation of campholenic aldehyde over iron modified catalysts using toluene as a solvent at 70 °C (total conversion of α-pinene oxide with a selectivity of 66 % to the desired aldehyde) was achieved in the presence of Fe-MCM-41. Furthermore, Fe-MCM-41 catalyst was successfully regenerated without deterioration of catalytic activity and selectivity. The most active catalysts in the synthesis of trans-carveol from α-pinene oxide over iron and ceria modified catalysts in N,N-dimethylacetamide as a solvent at 140 °C (total conversion of α-pinene oxide with selectivity 43 % to trans-carveol) were Fe-Beta-300 and Ce-Si-MCM-41. These catalysts were further tested for an analogous reaction, namely verbenol oxide isomerization. Verbenone is another natural organic compound which can be found in a variety of plants or synthesized by allylic oxidation of α-pinene. An interesting product which is synthesized from verbenone is (1R,2R,6S)-3-methyl-6-(prop-1-en-2-yl)cyclohex-3-ene-1,2-diol. It has been discovered that this diol possesses potent anti-Parkinson activity. The most effective way leading to desired diol starts from verbenone and includes three stages: epoxidation of verbenone to verbenone oxide, reduction of verbenone oxide and subsequent isomerization of obtained verbenol oxide, which is analogous to isomerization of α-pinene oxide. In the research focused on the last step of these synthesis, high selectivity (82 %) to desired diol was achieved in the isomerization of verbenol oxide at a conversion level of 96 % in N,N-dimethylacetamide at 140 °C using iron modified zeolite, Fe-Beta-300. This reaction displayed surprisingly high selectivity, which has not been achieved yet. The possibility of the reuse of heterogeneous catalysts without activity loss was demonstrated.

Transformation of carbon dioxide to diethyl carbonate over ceria and ceria-supported catalysts

Carbon dioxide is regarded, nowadays, as a primary anthropogenic greenhouse gas leading to global warming. Hence, chemical fixation of CO2 has attracted much attention as a possible way to manufacture useful chemicals. One of the most interesting approaches of CO2 transformations is the synthesis of organic carbonates. Since conventional production technologies of these compounds involve poisonous phosgene and carbon monoxide, there is a need to develop novel synthetic methods that would better match the principles of "Green Chemistry" towards protection of the environment and human health. Over the years, synthesis of dimethyl carbonate was under intensive investigation in the academia and industry. Therefore, this study was entirely directed towards equally important homologue of carbonic esters family namely diethyl carbonate (DEC). Novel synthesis method of DEC starting from ethanol and CO2 over heterogeneous catalysts based on ceria (CeO2) was studied in the batch reactor. However, the plausible drawback of the reaction is thermodynamic limitations. The calculated values revealed that the reaction is exothermic (ΔrHØ298K = ─ 16.6 J/ ) and does not occur spontaneously at rooms temperature (ΔrGØ 298K = 35.85 kJ/mol). Moreover, co-produced water easily shifts the reaction equilibrium towards reactants excluding achievement of high yields of the carbonate. Therefore, in-situ dehydration has been applied using butylene oxide as a chemical water trap. A 9-fold enhancement in the amount of DEC was observed upon introduction of butylene oxide to the reaction media in comparison to the synthetic method without any water removal. This result confirms that reaction equilibrium was shifted in favour of the desired product and thermodynamic boundaries of the reaction were suppressed by using butylene oxide as a water scavenger. In order to obtain insight into the reaction network, the kinetic experiments were performed over commercial cerium oxide. On the basis of the selectivity/conversion profile it could be concluded that the one-pot synthesis of diethyl carbonate from ethanol, CO2 and butylene oxide occurs via a consecutive route involving cyclic carbonate as an intermediate. Since commercial cerium oxide suffers from the deactivation problems already after first reaction cycle, in-house CeO2 was prepared applying room temperature precipitation technique. Variation of the synthesis parameters such as synthesis time, calcination temperature and pH of the reaction solution turned to have considerable influence on the physico-chemical and catalytic properties of CeO2. The increase of the synthesis time resulted in high specific surface area of cerium oxide and catalyst prepared within 50 h exhibited the highest amount of basic sites on its surface. Furthermore, synthesis under pH 11 yielded cerium oxide with the highest specific surface area, 139 m2/g, among all prepared catalysts. Moreover, CeO2─pH11 catalyst demonstrated the best catalytic activity and 2 mmol of DEC was produced at 180 oC and 9 MPa of the final reaction pressure. In addition, ceria-supported onto high specific surface area silicas MCM-41, SBA-15 and silica gel were synthesized and tested for the first time as catalysts in the synthesis of DEC. Deposition of cerium oxide on MCM-41 and SiO2 supports resulted in a substantial increase of the alkalinity of the carrier materials. Hexagonal SBA-15 modified with 20 wt % of ceria exhibited the second highest basicity in the series of supported catalysts. Evaluation of the catalytic activity of ceria-supported catalysts showed that reaction carried out over 20 wt % CeO2-SBA-15 generated the highest amount of DEC.

Lesiones Intraepiteliales de Alto Grado (LEIAG) en la población subsidiada, contributiva y pobre no asegurada en el municipio de Villavicencio, Colombia. 2008

Introducción: el Cáncer de cérvix en Colombia ocupa el primer lugar en mortalidad e incidencia. La mortalidad en el departamento del Meta durante el 2008 llegó a 65 casos, incrementándose en 15 casos con relación al año anterior. De esta cifra Villavicencio reportó 36 casos. Metodología: estudio descriptivo, de pacientes nuevos que reportaron biopsias LEIAG afiliados al régimen contributivo, subsidiado y población pobre no asegurada, en el municipio de Villavicencio durante el año 2008. De 471 registros, 189 biopsias fueron clasificadas LEIAG, datos de 71 pacientes fueron procesados en SPSS15. Resultados: por aseguramiento el 42% pertenece al contributivo, 41% al subsidiado, 12 % a la población pobre no asegurada y 5 % multiafiliados. El 88.7% de LEIAG se presentan entre 30-60 años. El 90.1% no asistió a programas de promoción y prevención. El 84% del contributivo, recibió reporte de citología entre 0-11 días. Contrastando con el 95% de la población pobre no asegurada 20-49 días. El 70.3% recibió reporte de biopsia entre 0 a 19 días. El 43.7% inició relaciones sexuales entre los 12-15 años. El 35.2% ha estado expuesta a fumigaciones. El 38% presentan antecedentes familiares de cáncer, predominando cérvix, seno y estómago. Discusión: riesgos como edad, relaciones sexuales tempranas, exposición a tóxicos, se encuentran en parámetros de literatura revisada. Demanda inducida y procesos de promoción y prevención son factores que deben fortalecer aseguradores, prestadores y ente territorial.

Filosofía : BUP : tercer curso : temas de lógica y metodología científica.

El ejemplar correspondiente al Documento 41/1 se publicó el año 1978 y el corriespondiente al Documento 41/2 en el año 1980

The trapping and decomposition of toxic gases such as hydrogen cyanide using modified mesoporous silicates

Selected silicas were modified with the covalently bound ligand 2,6-bis(benzoxazoyl)pyridine (BBOP), equilibrated with copper(II) nitrate, then challenged with toxic vapour containing HCN (8000 mg m(-3) at 80% relative humidity). The modified SBA-15 material (Cu-BBOP-SBA-15) had an improved breakthrough time for HCN (36 min at a flow rate of 30 cm(3) min(-1)) when compared to the other siliceous materials prepared in this study, equating to a hydrogen cyanide capacity of 58 mg g(-1), which is close to a reference activated carbon adsorbent (24 min at 50 cm(3) min(-1)) that can trap 64 mg g(-1). The enhanced performance observed with Cu-BBOP-SBA-15 has been related to the greater accessibility of the functional groups, arising from the ordered nature of the interconnected porous network and large mesopores of 5.5 nm within the material modified with the Cu(II)-BBOP complex. Modified MCM-41 and MCM-48 materials (Cu-BBOP-MCM-41 and Cu-BBOP-MCM-48) were found to have lower hydrogen cyanide capacities (38 and 32 mg g(-1) respectively) than the Cu-BBOP-SBA-15 material owing to the restricted size of the pores (2.2 and <2 nm respectively). The materials with poor nano-structured ordering were found to have low hydrogen cyanide capacities, between 11 and 19 mg g(-1), most likely owing to limited accessibility of the functional groups. (C) 2004 Elsevier Inc. All rights reserved.