New oil modified acrylic polymer for pH sensitive drug release:experimental results and statistical analysis

We report results of an experimental study, complemented by detailed statistical analysis of the experimental data, on the development of a more effective control method of drug delivery using a pH sensitive acrylic polymer. New copolymers based on acrylic acid and fatty acid are constructed from dodecyl castor oil and a tercopolymer based on methyl methacrylate, acrylic acid and acryl amide were prepared using this new approach. Water swelling characteristics of fatty acid, acrylic acid copolymer and tercopolymer respectively in acid and alkali solutions have been studied by a step-change method. The antibiotic drug cephalosporin and paracetamol have also been incorporated into the polymer blend through dissolution with the release of the antibiotic drug being evaluated in bacterial stain media and buffer solution. Our results show that the rate of release of paracetamol getss affected by the pH factor and also by the nature of polymer blend. Our experimental data have later been statistically analyzed to quantify the precise nature of polymer decay rates on the pH density of the relevant polymer solvents. The time evolution of the polymer decay rates indicate a marked transition from a linear to a strictly non-linear regime depending on the whether the chosen sample is a general copolymer (linear) or a tercopolymer (non-linear). Non-linear data extrapolation techniques have been used to make probabilistic predictions about the variation in weight percentages of retained polymers at all future times, thereby quantifying the degree of efficacy of the new method of drug delivery.

Quantifying Aflatoxin B1 in peanut oil using fabricating fluorescence probes based on upconversion nanoparticles

Rare earth doped upconversion nanoparticles convert near-infrared excitation light into visible emission light. Compared to organic fluorophores and semiconducting nanoparticles, upconversion nanoparticles (UCNPs) offer high photochemical stability, sharp emission bandwidths, and large anti-Stokes shifts. Along with the significant light penetration depth and the absence of autofluorescence in biological samples under infrared excitation, these UCNPs have attracted more and more attention on toxin detection and biological labelling. Herein, the fluorescence probe based on UCNPs was developed for quantifying Aflatoxin B₁ (AFB₁) in peanut oil. Based on a specific immunity format, the detection limit for AFB₁ under optimal conditions was obtained as low as 0.2 ng·ml^{- 1}, and in the effective detection range 0.2 to 100 ng·ml^{- 1}, good relationship between fluorescence intensity and AFB₁ concentration was achieved under the linear ratios up to 0.90. Moreover, to check the feasibility of these probes on AFB₁ measurements in peanut oil, recovery tests have been carried out. A good accuracy rating (93.8%) was obtained in this study. Results showed that the nanoparticles can be successfully applied for sensing AFB₁ in peanut oil.

Controlling fly strike and louse infections in sheep with tea tree oil

This study aimed to assess the effect of tea tree oil based formulations against two major ectoparasitic diseases in the sheep industry, flystrike and louse infestation, and to provide data to assist the assessment of the commercial feasibility of development of tea tree oil based ectoparasiticides. The results demonstrate insecticidal effects against both sheep lice and blowflies and repellent effects against adult flies and maggots. Dipping sheep in a Tea Tree Oil based formulation appeared to completely eradicate lice and suggests its potential use in sheep dipping formulations. Repellent and insecticidal effects against sheep blowflies, together with previously reported anti-microbial and wound healing properties, suggest significant benefits from the inclusion of tea tree oil in flystrike and wound treatment formulations. These effects occurred at concentrations of Tea Tree Oil that suggest the commercial viability of development of Tea Tree Oil based formulations for sheep parasite control and wound treatment and a potential new market for Tea Tree Oil.

Avaliação das propriedades físico-químicas do biodiesel de soja, algodão e mamona e da mistura de biodiesel de soja e algodão

Uma das maiores atividades humanas que gera impacto ao meio ambiente é o setor de transportes automotores, especialmente veículos que utilizam óleo diesel mineral como forma de combustível. Independente do conforto ou objetivos que levem a utilização deste tipo de transporte, estes produzem emissões que contém diversos tipos de poluentes atmosféricos. A substituição de óleo diesel mineral pelo biodiesel vegetal, vem se apresentando como uma alternativa para este setor, especialmente para o Brasil, que com base em sua imensa biodiversidade com plantas oleaginosas deverá se constituir em um dos maoires produtores mundiais de biodiesel vegetal. Este trabalho apresenta um estudo comparativo entre três tipos de oleaginosas (soja, algodão e mamona) e uma msitura binária v/v soja e algodão. Os resultados obtidos neste estudo foram comparados as especificações definidas pelas normas: Brasileira (RANP 07/2008), Européia (EN/14214) e Americana (ASTM D-6751). Entre todas as amostras estudadas, o óleo de mamona não atende algumas propiedades físico-químicas das normas em questão. As amostras de biodiesel de soja e algodão, individualmente e combinadas, com caracteristicas, aplicações, zoneamento agroclimático e sazonalidade de produção regionalmente diferente apresentam propiedades físico-químicas semelhantes, podendo ser considerada uma fonte renovavél de energia.

Avaliação Econômica do Biodiesel no Brasil: Investigando a Competitividade e Eficiência do Sistema Produtivo a partir da MAP.

O presente trabalho tem por finalidade realizar uma análise econômica dos possíveis impactos gerados na economia brasileira pelo Programa Nacional de Produção e Uso do Biodiesel (PNPB) e pela Lei N 11.097, que define percentuais mínimos obrigatórios de adição de biodiesel ao óleo diesel. Para atingir tal objetivo, apresenta-se uma avaliação econômica por meio do método de investigação conhecido como Matriz de Análise de Política (MAP). O emprego deste instrumental proporciona uma avaliação em termos de competitividade e eficiência do sistema de produção com base em um estudo comparativo da cadeia produtiva de biodiesel selecionando duas matérias-primas a soja e a mamona. Neste sentido, inicialmente investiga-se a cadeia produtiva do biodiesel no Brasil para diagnosticar as vantagens no que tange a escala de produção, a escolha de matérias-primas, bem como o custo de oportunidade, método de comercialização e distribuição e também a questão tributária. Os resultados da analise econômica revelaram que o emprego do óleo de soja para geração do biodiesel apresenta maior rentabilidade privada e social indicando ser mais competitivo e eficiente frente ao sistema produtivo que emprega o óleo de mamona. Os resultados da pesquisa evidenciando não apenas os aspectos econômicos como os sócio-ambientais favoráveis ao PNPB mostrando que o Brasil tem todas as condições para tornar-se um grande produtor de biodiesel.

Avaliação econômica do biodiesel no Brasil: investigando a competitividade e eficiência do sistema produtivo a partir da MAP

O presente trabalho realiza uma análise econômica dos possíveis impactos gerados na economia brasileira pelo Programa Nacional de Produção e Uso do Biodiesel (PNPB) e pela Lei N 11.097/2005, que define percentuais mínimos obrigatórios de adição de biodiesel ao óleo diesel. Para atingir tal objetivo, apresenta-se uma avaliação econômica por meio de um método de investigação conhecido como Matriz de Análise de Política (MAP). Este instrumental permite uma avaliação em termos de competitividade e eficiência do sistema produtivo de biodiesel com base em um estudo comparativo da cadeia produtiva de biodiesel selecionando duas matérias-primas a soja e a mamona. Neste sentido, inicialmente investiga-se a cadeia produtiva do biodiesel no Brasil para diagnosticar as vantagens no que tange a escala de produção, a escolha de matérias-primas, bem como o custo de oportunidade, método de comercialização e distribuição e também a questão tributária. Por fim são apresentados os resultados da pesquisa evidenciando que os dois sistemas são rentáveis, competitivos e eficientes, no entanto, maiores ganhos, em termos de uso dos recursos disponíveis e de custos de produção podem ser obtidos no sistema de produção do biodiesel a partir da soja. O lucro maior apresentado para a produção de biodiesel da soja permite confirmar a preferência por este sistema de produção dada sua maior rentabilidade.

Delamination of oil paints from acrylic grounds

Many modern artists paint in oil or oil-modified alkyd paints over acrylic grounds. In some cases the oil based paints do not remain adhered to the ground. In a set of composite samples of oil or alkyd paints, over acrylic grounds, naturally aged for nine years, some of the samples delaminated. Samples were analyzed with X-ray fluorescence (XRF), inductively coupled plasma (ICP), Fourier transform infrared - attenuated total reflectance (FTIR-ATR), scanning electron microscopy (SEM), pyrolysis gas-chromatography mass-spectrometry (PY-GC/MS), laser desorption/ionization mass-spectrometry (LDI-MS), atomic force microscopy (AFM) and other methods, in order to find what the delaminating ones have in common. In addition, two examples of severely delaminating paintings were examined, to confirm the results from the laboratory-prepared samples. Results indicate the main cause of delamination is metal soaps in the oil paint and particularly zinc soaps. There is some evidence that metal soaps were more concentrated at the interface between the layers and this disrupted the adhesion. The ground is a minor consideration as well, rougher grounds providing better adhesion than smooth ones.

A Study on the Use of Coconut Oil as Plasticiser in Natural Rubber Compounds

Mechanical properties and thermal degradation characteristics of natural rubber compounds captaining coconut oil were compared with that of a control compound containing naphthenic oil. Cure time was marginally lower in the case of coconut oil mixes, probably due to the presence of free fatty acids. Tensile strength , tear strength, resilience and abrasion resistance were better than the naphthenic oil-based compounds . Compression set and hardness were marginally inferior The coconut oil mixes had a crosslink density comparable to that of the reference compound. Thermal studies showed that the temperature of initiation of degradation was increased by 10°C and the temperature at which the peak rate of degradation occured was increased by 7°C. The peak rate of degradation was compa rable to the control compound.

Saturated salt solutions for humidity control and the survival of dry powder and oil formulations of Beauveria bassiana conidia

Oil-based formulated conidia sprayed on steel plates and conidia powder (control) of Beauveria bassiana isolate IMI 386243 were stored at temperatures from 10 to 40 degrees C in desiccators over saturated salt solutions providing relative humidities from 32 to 88%, or in hermetic storage at 40 degrees C, and moisture contents in equilibrium with 33 or 77% relative humidity. The negative semi-logarithmic relation (P < 0.005) between conidia longevity (at 40 degrees C) and equilibrium relative humidity did not differ (P > 0.25) between formulated conidia and conidia powder. Despite this, certain saturated salts provided consistently greater longevity (NaCl) and others consistently shorter longevity (KCl) for formulated conidia compared to conidia powder. These results, analysis of previous data, and comparison with hermetic storage, indicate that storage of conidia over saturated salt solutions provides inconsistent responses to environment and so may be problematic for bio-pesticide research. In hermetic storage, oil formulation was not deleterious to longevity and in the more moist environment enhanced survival periods. (c) 2005 Elsevier Inc. All rights reserved.

Use of water-miscible retinyl palmitate as markers of chylomicrons gives earlier peak response of plasma retinyl esters compared with oil-soluble retinyl palmitate

Delayed peak response of plasma retinyl esters (RE) relative to plasma triacylglycerols (TAG) and apolipoprotein (Apo) B-48 responses following a fat load supplemented with vitamin A raised doubts about the use of vitamin A to label dietary-derived lipids and lipoproteins. The present study compared the use of water-miscible and oil-soluble retinyl palmitate (RP) as markers of dietary-derived lipoproteins in healthy subjects along with the measurements of postprandial plasma TAG and ApoB-48 responses to investigate whether the delayed peak response observed was due to delayed intestinal output of RE from oil-based solutions. Nine healthy female subjects were given a standard test meal containing a dose (112 mg) of RP in either water-miscible or oil-soluble form in random order, on two separate occasions after a 12 h overnight fast. The results showed that the mean plasma RE concentrations reached a peak significantly later than mean plasma TAG and ApoB-48 concentrations when oil-soluble RP was consumed, whereas plasma RE peaked earlier relative to plasma TAG and ApoB-48 responses when water-miscible RP was used. The results suggested a more rapid absorption with a significantly higher and earlier peak response of plasma RE when water-miscible RP was consumed. This was in contrast to the delayed initial appearance and later sustained higher concentrations of plasma RE during the late postprandial period when oil-soluble RP was consumed. The RE response to the water-miscible RP showed better concordance with plasma TAG response than that of oil-soluble RP.

Anti-inflammatory effect of parenteral fish oil lipid emulsion on human activated mononuclear leukocytes

Background & aim: To compare the effect of fish oil-based (FO) lipid emulsions (LE) for parenteral administration with standard LE and a new FO containing LE composed of four different oils on the antigen presentation and inflammatory variables. Methods: Phytohemagglutinin (PHA) activated human mononuclear leukocytes were cultured with different LE - Control: without LE; SO: soybean oil; SO/FO: soybean and FO (4:1); MCT/SO: medium chain triglycerides and SO (1:1); MCT/SO/FO: MCT/SO and FO (4:1) and SMOF: a new LE containing FO. Cytokine production was evaluated by ELISA, the expression of antigen-presenting and co-stimulatory surface molecules were analyzed by flow cytometry and lymphocyte proliferation was assessed by H(3)-Thymidine incorporation, after tetanus toxoid-induced activation. Results: All LE decreased the HLA-DR and increased CD28 and CD152 expression on monocytes/macrophages and lymphocytes surface (p < 0.05). SO/FO and MCT/SO/FO decreased lymphocyte proliferation (p<0.05). All LE decreased IL-2 product ion, but this effect was enhanced with MCT/SO/FO and SMOF (p < 0.05). MCT/SOTO decreased IL-6 and increased IL-10, whereas SO had the opposite effect (p < 0.05). Conclusion: FO LE inhibited lymphocyte proliferation and had an anti-inflammatory effect. These effects seem to be enhanced when FO is mixed with MCT/SO. SMOF had a neutral impact on lymphocyte proliferation and IL-6 and IL-10 production.

Fish oil replacement in rainbow trout diets and total dietary PUFA content : II) Effects on fatty acid metabolism and in vivo fatty acid bioconversion

This study aimed to gain a better understanding of the metabolic fate of dietary fatty acids in rainbow trout, with a specific focus on the effect of varying total C18 PUFA level. Fish were fed a control fish oil based diet or one of five experimental fish oil deprived diets formulated with a constant 1/1 ratio of 18:3n-3/18:2n-6 and varying total C18 PUFA levels for a period of 7 weeks. The transcriptional changes of the Δ-6 desaturase and elongase enzymes in direct comparison to in vivo fatty acid bioconversion, estimated using the whole-body fatty acid balance method, were analysed. The main findings were that i) the efficiency of Δ-6 desaturase was negatively affected by C18 PUFA availability, but the total apparent in vivo enzyme activity was directly proportional to C18 PUFA substrate availability; ii) Δ-6 desaturase had a greater affinity towards n-3PUFA than n-6PUFA; iii) excessive C18 PUFA substrate availability could limit the availability of Δ-6 desaturase to act on C24 fatty acid; iv) the elimination of dietary n-3LC-PUFA (enzyme products) up-regulated the transcription rate of Δ-6 desaturase; but v) the total apparent in vivo enzyme activity was directly and positively affected by substrate availability, and not product presence/absence nor the extent of the enzyme transcription rate.

Short-term food deprivation before a fish oil finishing strategy improves the deposition of n-3 LC-PUFA, but not the washing-out of C18 PUFA in rainbow trout

This study aimed to test the hypothesis that the efficiency of a finishing period can be improved by reducing the initial fat content of fish fillets, by means of a period of food deprivation. Two groups of rainbow trout (Oncorhynchus mykiss) were fed for an 18-week grow-out period on a vegetable oil-based diet (VO) or a fish oil-based diet (FO). VO fed fish were then split into two sub groups: one (VO/FO) was shifted to the FO diet for 8 weeks, whilst the other (UF/FO) was deprived of food (unfed) for 2 weeks and then fed the FO diet for the remaining 6 weeks. The control treatment (FO/FO) was represented by fish continuously fed FO. The subsequent reduction of total fat in the UF/FO treatment was then responsible for a much faster recovery towards a FO-like fatty acid profile, validating the proposed hypothesis. However, the modification of the fatty acid composition of fish fillets during the feed withholding period, coupled with the postponement of the finishing diet, resulted in only minor beneficial effects of this strategy, and the loss of potential weight gain. However, the n-3 LC-PUFA content in UF/VO fish fillets was significantly higher than fish subjected to the VO/FO treatment.

Fish oil replacement in current aquaculture feed : is cholesterol a hidden treasure for fish nutrition?

Teleost fish, as with all vertebrates, are capable of synthesizing cholesterol and as such have no dietary requirement for it. Thus, limited research has addressed the potential effects of dietary cholesterol in fish, even if fish meal and fish oil are increasingly replaced by vegetable alternatives in modern aquafeeds, resulting in progressively reduced dietary cholesterol content. The objective of this study was to determine if dietary cholesterol fortification in a vegetable oil-based diet can manifest any effects on growth and feed utilization performance in the salmonid fish, the rainbow trout. In addition, given a series of studies in mammals have shown that dietary cholesterol can directly affect the fatty acid metabolism, the apparent in vivo fatty acid metabolism of fish fed the experimental diets was assessed. Triplicate groups of juvenile fish were fed one of two identical vegetable oil-based diets, with additional cholesterol fortification (high cholesterol, H-Chol) or without (low cholesterol, L-Chol), for 12 weeks. No effects were observed on growth and feed efficiency, however, in fish fed H-Col no biosynthesis of cholesterol, and a remarkably decreased apparent in vivo fatty acid b-oxidation were recorded, whilst in LChol fed fish, cholesterol was abundantly biosynthesised and an increased apparent in vivo fatty acid b-oxidation was observed. Only minor effects were observed on the activity of stearyl-CoA desaturase, but a significant increase was observed for both the transcription rate in liver and the apparent in vivo activity of the fatty acid D-6 desaturase and elongase, with increasing dietary cholesterol. This study showed that the possible effects of reduced dietary cholesterol in current aquafeeds can be significant and warrant future investigations.

Obtenção de álcool alílico (PROP-2-EN-1-OL) a partir da glicerina derivada do biodiesel de óleo de mamona

In this work, biodiesel was produced from castor oil that was a byproduct glycerin. The molar ratio between oil and alcohol, as well as the use of (KOH) catalyst to provide the chemical reaction is based on literature. The best results were obtained using 1 mol of castor oil (260g) to 3 moles of methyl alcohol (138g), using 1.0% KOH as catalyst at a temperature of 260 ° C and shaken at 120 rpm. The oil used was commercially available, the process involves the reaction of transesterification of a vegetable oil with methyl alcohol. The product of this reaction is an ester, biodiesel being the main product and the glycerin by-product which has undergone treatment for use as raw material for the production of allyl alcohol. The great advantage of the use of glycerin to obtain allyl alcohol is that its use eliminates the large amount of waste of the biodiesel and various forms of insult to the environment. The reactions for the formation of allyl alcohol was conducted from formic acid and glycerin in a ratio 1/1, at a temperature of 260oC in a heater blanket, being sprayed by a spiral condenser for a period of 2 hours and the product obtained contains mostly the allylic alcohol .. The monitoring of reactions was performed by UV-Visible Spectrophotometer: FTIR Fourier transform, the analysis showed that these changes occur spectrometer indicating the formation of the product allylic alcohol (prop-2-en-1-ol) in the presence of water, This alcohol was appointed Alcohol GL. The absorption bands confirms that the reaction was observed in (υ C = C) 1470 -1600 cm -1 and (υ CO), 3610-3670 attributed to C = C groups and OH respectively. The thermal analysis was carried out in a thermogravimetric analyzer SDT Q600, where the mass and temperature are displayed against time, that allows checking the approximate rate of heating. The innovative methodology developed in the laboratory (LABTAM, UFRN), was able to treat the glycerine produced by transesterification of castor oil and used as raw material for production of allyl alcohol, with a yield of 80%, of alcohol, the same is of great importance in the manufacture of polymers, pharmaceuticals, organic compounds, herbicides, pesticides and other chemicals