Detailed measurements of spike formation in an axial compressor

This paper presents new experimental measurements of spike-type stall inception. The measurements were carried out in the single stage Deverson compressor at the Whittle Laboratory. The primary objective was to characterize the flow field in the tip clearance gap during stall inception using sufficient instrumentation to give high spatial and temporal resolution. Measurements were recorded using arrays of unsteady pressure transducers over the rotor tips and hot-wires in the tip gap. Prestall ensemble averaged velocity and pressure maps were obtained as well as pressure contours of the stall event. In order to study the transient inception process in greater detail, vector maps were built up from hundreds of stalling events using a triggering system based on the stalling event itself. The results show an embryonic disturbance starting within the blade passage and leading to the formation of a clear spike. The origins of the spike and its relation to the tip leakage vortex are discussed. It has also been shown that before stall, the flow in the blade passage which is most likely to stall is generally more unsteady, from revolution to revolution, than the other passages in the annulus. © 2014 by ASME.

Digital elevation models and GIS for watershed modelling and flood prediction-A case study of Accra Ghana

Geographical Information Systems (GIS) and Digital Elevation Models (DEM) can be used to perform many geospatial and hydrological modelling including drainage and watershed delineation, flood prediction and physical development studies of urban and rural settlements. This paper explores the use of contour data and planimetric features extracted from topographic maps to derive digital elevation models (DEMs) for watershed delineation and flood impact analysis (for emergency preparedness) of part of Accra, Ghana in a GIS environment. In the study two categories of DEMs were developed with 5 m contour and planimetric topographic data; bare earth DEM and built environment DEM. These derived DEMs were used as terrain inputs for performing spatial analysis and obtaining derivative products. The generated DEMs were used to delineate drainage patterns and watershed of the study area using ArcGIS desktop and its ArcHydro extension tool from Environmental Systems Research Institute (ESRI). A vector-based approach was used to derive inundation areas at various flood levels. The DEM of built-up areas was used as inputs for determining properties which will be inundated in a flood event and subsequently generating flood inundation maps. The resulting inundation maps show that about 80% areas which have perennially experienced extensive flooding in the city falls within the predicted flood extent. This approach can therefore provide a simplified means of predicting the extent of inundation during flood events for emergency action especially in less developed economies where sophisticated technologies and expertise are hard to come by. © 2009 Springer Netherlands.

Efficient parametric uncertainty analysis within the hybrid Finite Element/Statistical Energy Analysis method

This paper is concerned with the development of efficient algorithms for propagating parametric uncertainty within the context of the hybrid Finite Element/Statistical Energy Analysis (FE/SEA) approach to the analysis of complex vibro-acoustic systems. This approach models the system as a combination of SEA subsystems and FE components; it is assumed that the FE components have fully deterministic properties, while the SEA subsystems have a high degree of randomness. The method has been recently generalised by allowing the FE components to possess parametric uncertainty, leading to two ensembles of uncertainty: a non-parametric one (SEA subsystems) and a parametric one (FE components). The SEA subsystems ensemble is dealt with analytically, while the effect of the additional FE components ensemble can be dealt with by Monte Carlo Simulations. However, this approach can be computationally intensive when applied to complex engineering systems having many uncertain parameters. Two different strategies are proposed: (i) the combination of the hybrid FE/SEA method with the First Order Reliability Method which allows the probability of the non-parametric ensemble average of a response variable exceeding a barrier to be calculated and (ii) the combination of the hybrid FE/SEA method with Laplace's method which allows the evaluation of the probability of a response variable exceeding a limit value. The proposed approaches are illustrated using two built-up plate systems with uncertain properties and the results are validated against direct integration, Monte Carlo simulations of the FE and of the hybrid FE/SEA models. © 2013 Elsevier Ltd.

Digital Elevation Models and GIS for watershed modelling and flood prediction - A case study of Accra Ghana

Geographical Information Systems (GIS) and Digital Elevation Models (DEM) can be used to perform many geospatial and hydrological modelling including drainage and watershed delineation, flood prediction and physical development studies of urban and rural settlements. This paper explores the use of contour data and planimetric features extracted from topographic maps to derive digital elevation models (DEMs) for watershed delineation and flood impact analysis (for emergency preparedness) of part of Accra, Ghana in a GIS environment. In the study two categories of DEMs were developed with 5 m contour and planimetric topographic data; bare earth DEM and built environment DEM. These derived DEMs were used as terrain inputs for performing spatial analysis and obtaining derivative products. The generated DEMs were used to delineate drainage patterns and watershed of the study area using ArcGIS desktop and its ArcHydro extension tool from Environmental Systems Research Institute (ESRI). A vector-based approach was used to derive inundation areas at various flood levels. The DEM of built-up areas was used as inputs for determining properties which will be inundated in a flood event and subsequently generating flood inundation maps. The resulting inundation maps show that about 80% areas which have perennially experienced extensive flooding in the city falls within the predicted flood extent. This approach can therefore provide a simplified means of predicting the extent of inundation during flood events for emergency action especially in less developed economies where sophisticated technologies and expertise are hard to come by. © Springer Science + Business Media B.V. 2009.

Crosstalk analysis of a fiber laser sensor array system based on digital phase-generated carrier scheme

A detailed study on analyzing the crosstalk in a wavelength division multiplexed fiber laser sensor array system based on a digital phase generated carrier interferometric interrogation scheme is reported. The crosstalk effects induced by the limited optical channel isolation of a dense wavelength division demultiplexer (DWDM) are presented, and the necessary channel isolation to keep the crosstalk negligible to the output signal was calculated via Bessel function expansion and demonstrated by a two serial fiber laser sensors system. Finally, a three-element fiber laser sensor array system with a 50-dB channel-isolation DWDM was built up. Experimental results demonstrated that there was no measurable crosstalk between the output channels.

沈阳城市森林结构与净化生态效益研究

城市森林的结构和功能一直是城市森林生态学研究的一个重要内容。但至今仍缺乏一种有效的结构分析及效益量化手段，尤其是生态效益价值的量化比较困难，缺乏具体的数量指标。本研究以沈阳建成区为研究对象，第一次将目前国际上通用的CITYgreen模型应用到中国城市的森林结构及效益评价研究中，是一种方法上的突破。以CITYgreen3.0版本为基本运行界面，采用林业调查与GIS技术相结合的方法，对沈阳市建成区（二环以内）城市森林结构及净化生态效益进行了量化分析，得到如下主要结论：（1）城市森林组成成分单一，单一成分优势过于明显（2）城市森林结构在树木个体数量上以低矮、小胸径树木为骨架，整体健康水平低（3）城市森林分布不均、布局不合理（4）绿化状况较从前有显著提高，现有城市森林将在10年后开始逐渐发展为相对合理的结构布局（5）对不同污染物的净化效应有明显的区别，SO2的吸收量严重不足（6）CITYgreen模型是一种有效的效益量化工具，经过修改的模型适合于中国城市森林。

基于ITS 序列和matK 基因序列的中国药用石斛及其混伪品的分子鉴定

为了从分子水平对中国药用石斛及其混伪品进行鉴定，本文选取了核rDNA ITS 序列和叶绿体DNA 的matK 基因序列进行研究。采用改良的CTAB 法提取石斛的基因组DNA，PCR 产物直接测序法对17 种（共32 份）药用石斛的核糖体内转录间隔区ITS 全序列进行测定，克隆测序法对12 种（共22 份）药用石斛的叶绿体的matK 基因序列进行测定，运用BioEd it，MEGA4.0 等生物软件分析了石斛属植物的rDNA ITS 序列及叶绿体的matK 基因序列的特征，比较了石斛属间、种间、种内不同居群（品种）间的序列碱基差异及遗传距离，应用邻接法构建分子系统树。主要研究结果如下： （1）建立了17 种（共32 份）药用石斛rDNA ITS 区碱基全序列数据库，其中，ITS1 的长度为228~234 bp，GC 含量为45.7%~53.0%，变异位点167 个，占总位点67.34%，信息位点106 个，占总位点42.74%，ITS2 长度为241~247 bp，GC含量为44.8%~55.7%，变异位点165 个，占总位点66.27%，信息位点115 个，占总位点46.18%。 （2）建立了12 种（共22 份）药用石斛的叶绿体matK 基因全序列数据库，叶绿体matK 基因长1410 bp，变异位点51 个，信息位点11 个。除了存在碱基替换的遗传变异外，还存在碱基的插入和缺失。 （3）通过ITS 序列比较分析了各材料间的遗传距离和碱基差异，属间的遗传距离为0.295，石斛种间的平均遗传距离为0.142，碱基相差2~156 个，种内各居群间的平均遗传距离为0.002，碱基相差1~2 个。属间的遗传距离大于种间的遗传距离，种间的遗传距离大于种内不同居群（品种）间的遗传距离。 （4）根据分析石斛叶绿体的matK 基因序列得到，外类群（密花石豆兰）与石斛属间最小遗传距离为0.027，石斛种间的平均遗传距离为0.008，种间最大的遗传距离0.014， 最小的遗传距离为0.003，碱基相差8~20 个。种内不同居群（品种）遗传距离为0.001，相差1~5 个碱基。 （5）利用17 种石斛的全序列数据库及遗传分析软件，通过对待检种rDNA I TS区进行序列测定，成功地对10 个待检种进行了鉴定，并且在原植物开花后得到了验证。 （6）运用12 种石斛的matK 基因全序列数据库及遗传分析软件，成功地对4个待检种进行了鉴定，同样在原植物开花后得到了验证。 （7）本文利用石斛的核糖体内转录间隔区ITS 序列和叶绿体的matK 基因序列数据库分别构建了NJ 树，外类群与石斛属间石斛种间以及种内不同居群（品种）间均能在NJ 树中明显分化开来，二者构建的分子系统树一致，为石斛的分子鉴定提供了依据。 In order to identify Chinese Herba Dendrobii and its adulterant species on molecular level, we studied the sequences of rDNA ITS and chloroplast matK gene. Genomic DNA of Dendrobium was extracted using the modified cetyltrimethyl ammonium bromide (CTAB) method. The PCR products of the rDNA ITS sequences of Dendrobium (32 materia ls) were purified and then sequenced. The PCR products of chloroplast matK gene of Dendrobium (22 materia ls) were purified, cloned and then sequenced. The characteristic of the sequences and the genetic dista nce were compared between Bulbophyllum odoratissimum and Dendrobium, Dendrobium interspecies, and different populations. Phylogenetic trees were constructed using the NJ method by the biology softwares including BioEd it, MEGA4.0 etc. The ma in results as follows: (1) It was built up that the database of rDNA ITS sequences of 17 species of Herba Dendrobii (32 materia ls). The ITS1 was 228~234 bp, the GC content accounting for 45.7%~53.0%. Its variable sites were 167, accounting for 67.34%. The Parsim-Informative positions were 106, accounting for 42.74%. The ITS2 was 241~247 bp, the GC accounting for 44.8%~55.7%. The variable sites were 165, accounting for 66.27%. The Parsim-Informative positions were 115, accounting for 46.18%. (2) The database of the chloroplast matK gene sequences was built up, which contained 12 species of Herba Dendrobii (22 materia ls). The matK gene sequences were about 1410bp in length. There were 51 variable sites and 11 Parsim-Informative sites. And there were nucleotides insertions and deletions in some species , in addition to the nucleotides substitutions. (3) The rDNA ITS sequences were compared and analyzed by the biology softwares. The genetic dista nce between Bulbophyllum odoratissimum and Dendrobium was 0.295. The avera ge genetic dista nce was 0.142 between Dendrobium species, and there were 2~156 variable nucleotides. The avera ge genetic dista nce between different populations was 0.002, and there were 2~156 variable nucleotides. The genetic dista nce between Bulbophyllum odoratissimum and Dendrobium was greater tha n that of Denrobium interspecies. Meanwhile, the genetic dista nce between Denrobium species was also greater tha n that of different populations (variaties). (4) The characteristics of the chloroplast matK gene sequences were obtained after analyzing by the biology softwares. The minima l genetic dista nce was 0.027 between Bulbophyllum odoratissimum and Dendrobium . The ma xima l genetic dista nce was 0.014 between Dendrobium species, and there were 20 variable nucleotides. The minima l genetic dista nce between populations was 0.003, and there were 8 variable nucleotides.The genetic dista nce between populations was 0.001, and there were 1~5 variable nucleotides. (5) The molecular Phylogeny tree was constructed on the database of rDNA ITS the sequences of 17 species of Herba Dendrobii using the biology softwares. Then we authenticated 10 materia ls on molecular level. What’s more, they had been proved when these pla nts flowered. (6) The molecular Phylogeny tree was built up on the database of chloroplast matK gene sequences of 12 species of Herba Dendrobii with the biology softwares.Then 4 materia ls were authenticated on molecular level. Moreover, they had also been proved when these pla nts were in flower. (7) The Phylogenetic trees were separately constructed on the sequences of rDNA ITS and chloroplast matK gene B. odoratissimum and Dendrobium all could be distinguished on the Phylogenetic trees. Meanwhile, the Phylogenetic trees based on two groups of sequences were coincident. rDNA ITS and matK gene sequence could be used as molecular markers for authentication of Herba Dendrobii.

沈阳市建成区行道树的结构与功能研究

In the case of Shenyang, the structure and function of street trees in built-up area was studied. With the typical method of community sampling survey, the relative quantitative index, vertical distribution,and horizontal distribution were analysed. With CITY GREEN software, we analyzed the benefits of pollutants removal, and achieved some quantitative result. The results showed that the structure and function of street trees in Shenyang is becoming simple gradually. The regional difference is obvious and the benefits are not in balance, caused by unreasonable structure.

Spatial patterns and driving forces of land use change in China during the early 21st century

Land use and land cover change as the core of coupled human-environment systems has become a potential field of land change science (LCS) in the study of global environmental change. Based on remotely sensed data of land use change with a spatial resolution of 1 km x 1 km on national scale among every 5 years, this paper designed a new dynamic regionalization according to the comprehensive characteristics of land use change including regional differentiation, physical, economic, and macro-policy factors as well. Spatial pattern of land use change and its driving forces were investigated in China in the early 21st century. To sum up, land use change pattern of this period was characterized by rapid changes in the whole country. Over the agricultural zones, e.g., Huang-Huai-Hai Plain, the southeast coastal areas and Sichuan Basin, a great proportion of fine arable land were engrossed owing to considerable expansion of the built-up and residential areas, resulting in decrease of paddy land area in southern China. The development of oasis agriculture in Northwest China and the reclamation in Northeast China led to a slight increase in arable land area in northern China. Due to the "Grain for Green" policy, forest area was significantly increased in the middle and western developing regions, where the vegetation coverage was substantially enlarged, likewise. This paper argued the main driving forces as the implementation of the strategy on land use and regional development, such as policies of "Western Development", "Revitalization of Northeast", coupled with rapidly economic development during this period.

Impacts of LUCC processes on potential land productivity in China in the 1990s

Using meteorological data and RS dynamic land-use observation data set, the potential land productivity that is limited by solar radiation and temperature is estimated and the impacts of recent LUCC processes on it are analyzed in this paper. The results show that the influence of LUCC processes on potential land productivity change has extensive and unbalanced characteristics. It generally reduces the productivity in South China and increases it in North China, and the overall effect is increasing the total productivity by 26.22 million tons. The farmland reclamation and original farmlands losses are the primary causes that led potential land productivity to change. The reclamation mostly distributed in arable-pasture and arable-forest transitional zones and oasises in northwestern China has made total productivity increase by 83.35 million tons, accounting for 3.50% of the overall output. The losses of original farmlands driven by built-up areas invading and occupying arable land are mostly distributed in the regions which have rapid economic development, e.g. Huang-Huai-Hai plain, Yangtze River delta, Zhujiang delta, central part of Gansu, southeast coastal region, southeast of Sichuan Basin and Urumqi-Shihezi. It has led the total productivity to decrease 57.13 million tons, which is 2.40% of the overall output.

Study on spatial pattern of land-use change in China during 1995-2000

It is more and more acknowledged that land-use/cover dynamic change has become a key subject urgently to be dealt with in the study of global environmental change. Supported by the Landsat TM digital images, spatial patterns and temporal variation of land-use change during 1995 -2000 are studied in the paper. According to the land-use dynamic degree model, supported by the 1km GRID data of land-use change and the comprehensive characters of physical, economic and social features, a dynamic regionalization of land-use change is designed to disclose the spatial pattern of land-use change processes. Generally speaking, in the traditional agricultural zones, e.g., Huang-Huai-Hai Plains, Yangtze River Delta and Sichuan Basin, the built-up and residential areas occupy a great proportion of arable land, and in the interlock area of farming and pasturing of northern China and the oases agricultural zones, the reclamation I of arable land is conspicuously driven by changes of production conditions, economic benefits and climatic conditions. The implementation of "returning arable land into woodland or grassland" policies has won initial success in some areas, but it is too early to say that the trend of deforestation has been effectively reversed across China. In this paper, the division of dynamic regionalization of land-use change is designed, for the sake of revealing the temporal and spatial features of land-use change and laying the foundation for the study of regional scale land-use changes. Moreover, an integrated study, including studies of spatial pattern and temporal process of land-use change, is carried out in this paper, which is an interesting try on the comparative studies of spatial pattern on change process and the change process of spatial pattern of land-use change.

STUDY ON THE SPATIAL PATTERNS OF LAND-USE CHANGE AND ANALYSES OF DRIVING FORCES IN NORTHEASTERN CHINA DURING 1990-2000

Land-use change is an important aspect of global environment change. It is, in a sense, the direct result of human activities influencing our physical environment. Supported by the dynamic serving system of national resources, including both the environment database and GIS technology, this paper analyzed the land-use change in northeastern China in the past ten years (1990 - 2000). It divides northeastern China into five land-use zones based on the dynamic degree (DD) of land-use: woodland/grassland - arable land conversion zone, dry land - paddy field conversion zone, urban expansion zone, interlocked zone of farming and pasturing, and reclamation and abandoned zone. In the past ten years, land-use change of northeastern China can be generalized as follows: increase of cropland area was obvious, paddy field and dry land increased by 74. 9 and 276. 0 thousand ha respectively; urban area expanded rapidly, area of town and rural residence increased by 76. 8 thousand ha; area of forest and grassland decreased sharply with the amount of 1399. 0 and 1521. 3 thousand ha respectively; area of water body and unused land increased by 148. 4 and 513. 9 thousand ha respectively. Besides a comprehensive analysis of the spatial patterns of land use, this paper also discusses the driving forces in each land-use dynamic zones. The study shows that some key biophysical factors affect conspicuously the conversion of different land- use types. In this paper, the relationships between land- use conversion and DEM, accnmlated temperature(>= 10 degrees C) and precipitation were analysed and represented. We conclude that the land- use changes in northeast China resulted from the change of macro social and economic factors and local physical elements. Rapid population growth and management changes, in some sense, can explain the shaping of woodland/grassland - cropland conversion zone. The conversion from dry land to paddy field in the dry land - paddy field conversion zone, apart from the physical elements change promoting the expansion of paddy field, results from two reasons: one is that the implementation of market-economy in China has given farmers the right to decide what they plant and how they plant their crops, the other factor is originated partially from the change of dietary habit with the social and economic development. The conversion from paddy field to dry land is caused primarily by the shortfall of irrigation water, which in turn is caused by poor water allocation managed by local governments. The shaping of the reclamation and abandoned zone is partially due to the lack of environment protection consciousness among pioneer settlers. The reason for the conversion from grassland to cropland is the relatively higher profits of fanning than that of pasturing in the interlocked zone of farming and pasturing. In northeastern China, the rapid expansion of built-up areas results from two factors: the first is its small number of towns; the second comes from the huge potential for expansion of existing towns and cities. It is noticeable that urban expansion in the northeastern China is characterized by gentle topographic relief and low population density. Physiognomy, transportation and economy exert great influences on the urban expansion.

Assembly of the highest connectivity Wells-Dawson polyoxometalate coordination polymer: the use of organic ligand flexibility

Through tuning the length of flexible bis(triazole) ligands and different metal ion coordination geometries, four Wells-Dawson polyoxoanion-based hybrid compounds, [Cu-6(btp)(3)(P2W18O62)] center dot 3H(2)O (1) (btp = 1,3-bis(1,2,4-triazol-1-yl)propane), [Cu-6(btb)(3)((P2W18O62) center dot 2H(2)O (2), [Cu-3(btb)(6)(P2W18O62)] center dot 6H(2)O (btb = 1,4-bis(1,2,4-triazol-1-yl)butane) (3), and [Cu-3(btx)(5.5)((P2W18O62) center dot 4H(2)O (btx = 1,6-bis(1,2,4-triazol-1-yl)hexane) (4), were synthesized and structurally characterized. in compound 1, the metal-organic motif exhibits a ladder-like chain, which is further fused by the ennead-dentate [P2W18O62](6-) anions to construct a 3D structure. In compound 2, the metal-organic motif exhibits an interesting Cu-btb grid layer, and the ennead-dentate polyoxoanions are sandwiched by two Cu-btb layers to construct a 3D structure

[H2N (C2H4)(2)NH2](4) (H3O) [(PMo2Mo6V4O40)-Mo-V-V-VI-O-IV ((VO)-O-IV)(2)] center dot H2O: A new highly reduced, bicapped pseudo-Keggin vanadylpoly-molybdophosphate

A new vandylpolymolybdophosphate, [H2N(C2H4)(2)NH2](4)-(H3O)[(PMo2Mo6V4O40)-Mo-V-V-VI-O-IV((VO)-O-IV)(2)].H2O, was hydrothermally synthesized and structurally characterized by elemental analyses, IR, UV-vis, XPS, ESR spectra, mid singe crystal X-ray diffraction analysis. The compound contains an unusual highly reduced pseudo-Keggin type polyoxoanion with nine negative charges and exhibits an interesting phosphorus-centered alternate layer arrangement of molybdenum and vanadium oxides.

Characterization of organic-inorganic multilayer films by cyclic voltammetry, UV-Vis spectrometry, X-ray photoelectron spectroscopy, small-angle X-ray diffraction and electrochemical impedance spectroscopy

We have employed several techniques, including cyclic voltammetry, UV-Vis spectrometry, small-angle X-ray diffraction, X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy, to characterize the formation processes and interfacial features of ultrathin multilayer films of silicotungstate and a cationic redox polymer on cysteamine-coated Au electrodes self-assembled monolayers. All of these techniques confirm that the multilayer films are built up stepwise as well as uniformly in a layer-by-layer fashion. In particular, the electrochemical impedance spectroscopy is successfully used to monitor the multilayer deposition processes. It has been proved that the electrochemical impedance spectroscopy is a very useful technique in characterization of multilayer films because it provides valuable information about the interfacial impedance features.