Written in bones: Anthropological study of skeletal remains from middle age population of Leopoli Cencelle, (Viterbo)"

[en] Anthropological study of the human remains of a medieval cemetery in Leopoli-Cencelle in which the sex attribution, the estimation of age at death and the estimation of stature are taken into account.

Experimental study of temperatures during drilling of ex-vivo bovine bones

The thermal bone necrosis induced during a drilling process is a frequent and potential phenomenon, which contributes to post-operative problems. The frictional heat generated from the contact between the drill bit and the hole wall is unavoidable. However, understanding advanced techniques for acquiring reliable thermal data on bone drilling is important to ensure the quality of the drilled hole. The purpose of this study is to present two different experimental methods to analyse the drilling conditions that generate the lower temperatures, avoiding the occurrence of thermal bone necrosis. Ex-vivo bovine bones were used to simulate the drilling process considering the effect of drill bit diameter, drill speed and feed-rate. Different experiments were performed to assess the repeatability of the tests. The results identified the drill bit diameter as the most critical parameter for inducing higher temperatures in bone drilling.

Experimental study of temperatures during drilling of ex-vivo bovine bones

he thermal bone necrosis induced during a drilling process is a frequent and potential phenomenon, which contributes to post-operative problems. The frictional heat generated from the contact between the drill bit and the hole wall is unavoidable. However, understanding advanced techniques for acquiring reliable thermal data on bone drilling is important to ensure the quality of the drilled hole.

Thermal analysis in the drilling of solid rigid foam materials and ex-vivo bovine bones

Bone is a dynamic, highly vascularized tissue with a unique capacity to heal and regenerate without scarring. However, drilling remains a concern in several clinical procedures due to thermal damage of the bone and surrounding tissue. The success of this surgeries is dependent of many factors and also in temperature generation during the drilling bone. When an excessive heat is produced during the drilling, thermal necrosis can occur and the bone suffers injuries. Studies have shown that the increased temperature is directly related with the drilling parameters, particularly, the drill speed, feed-rate, applied force, the depth of cut, the geometry of the drill bit, the use or not of a cooling system and also the type of bone.

Processing and additive manufacturing of bones for the teaching of human anatomy

Traditionally, the teaching of human anatomy in health sciences has been based on the use of cadaveric material and bone parts for practical study. The bone materials get deteriorated and hardly mark the points of insertion of muscles. However, the advent of new technologies for 3D printing and creation of 3D anatomical models applied to teaching, has enabled to overcome these problems making teaching more dynamic, realistic and attractive. This paper presents some examples of the construction of three-dimensional models of bone samples, designed using 3D scanners for posterior printing with addition printers or polymer injection printers.

Scaphoid Fracture Nonunion: Correlation Of Radiographic Imaging, Proximal Fragment Histologic Viability Evaluation, And Estimation Of Viability At Surgery: Diagnosis Of Scaphoid Pseudarthrosis.

The purpose of this study was to correlate the pre-operative imaging, vascularity of the proximal pole, and histology of the proximal pole bone of established scaphoid fracture non-union. This was a prospective non-controlled experimental study. Patients were evaluated pre-operatively for necrosis of the proximal scaphoid fragment by radiography, computed tomography (CT) and magnetic resonance imaging (MRI). Vascular status of the proximal scaphoid was determined intra-operatively, demonstrating the presence or absence of puncate bone bleeding. Samples were harvested from the proximal scaphoid fragment and sent for pathological examination. We determined the association between the imaging and intra-operative examination and histological findings. We evaluated 19 male patients diagnosed with scaphoid nonunion. CT evaluation showed no correlation to scaphoid proximal fragment necrosis. MRI showed marked low signal intensity on T1-weighted images that confirmed the histological diagnosis of necrosis in the proximal scaphoid fragment in all patients. Intra-operative assessment showed that 90% of bones had absence of intra-operative puncate bone bleeding, which was confirmed necrosis by microscopic examination. In scaphoid nonunion MRI images with marked low signal intensity on T1-weighted images and the absence of intra-operative puncate bone bleeding are strong indicatives of osteonecrosis of the proximal fragment.

Análise transversal da estrutura óssea e parâmetros hematológicos em futebolistas profissionais = : Cross-sectional analysis of bone structure and hematological parameters in professional soccer players

Universidade Estadual de Campinas. Faculdade de Educação Física

Analise das alterações nos padrões de preensão palmar em pianistas

Universidade Estadual de Campinas . Faculdade de Educação Física

Clinical, microscopic and imaging findings associated to Mccune-Albright syndrome: report of two cases

McCune-Albright syndrome is characterized by the triad café-au-lait cutaneous spots, polyostotic fibrous dysplasia and endocrinopathies. This article presents two cases of McCune-Albright syndrome in a middle-aged woman and a young girl. Both patients presented café-au-lait spots on the face and other parts of the body and expansion of the mandible with radiopaque-radiolucent areas with ground-glass radiographic appearance, and were diagnosed as having fibrous dysplasia and endocrine disorders. The patient of Case 1 had fibrous dysplasia on the upper and lower limbs, thorax, face and cranium, early puberty, hyperglycemia, hyperthyroidism and high serum alkaline phosphatase levels. The patient of Case 2 presented lesions on the upper limbs and evident endocrine disorders. In both cases presented in this article, the initial exam was made because of the mandibular lesion. However, a diagnosis of fibrous dysplasia must lead to investigation of the involvement of other bones, characterizing polyostotic fibrous dysplasia, which is manifested in a number of diseases. An accurate differential diagnosis is mandatory to determine the best treatment approach for each case.

Influence of implant surfaces on osseointegration

The biological fixation between the dental implant surfaces and jaw bones should be considered a prerequisite for the long-term success of implant-supported prostheses. In this context, the implant surface modifications gained an important and decisive place in implant research over the last years. As the most investigated topic in, it aided the development of enhanced dental treatment modalities and the expansion of dental implant use. Nowadays, a large number of implant types with a great variety of surface properties and other features are commercially available and have to be treated with caution. Although surface modifications have been shown to enhance osseointegration at early implantation times, for example, the clinician should look for research evidence before selecting a dental implant for a specific use. This paper reviews the literature on dental implant surfaces by assessing in vitro and in vivo studies to show the current perspective of implant development. The review comprises quantitative and qualitative results on the analysis of bone-implant interface using micro and nano implant surface topographies. Furthermore, the perspective of incorporating biomimetic molecules (e.g.: peptides and bone morphogenetic proteins) to the implant surface and their effects on bone formation and remodeling around implants are discussed.

Electromyographic activity of masticatory muscles in women with osteoporosis

The purpose of this study was to analyze the electromyographic (EMG) activity and the maximal molar bite force in women diagnosed with osteoporosis in the maxillary and mandibular regions, considering the habits and conditions that lead to development of generalized skeletal bone loss, including on face bones, can disturb the functional harmony of the stomatognathic system. Twenty-seven women with mandibular and maxillary osteoporosis and 27 healthy controls volunteered to participate in the study. A 5-channel electromyographer was used. Muscle activity was evaluated by means of EMG recordings of the masticatory musculature (masseter and temporalis muscles, bilaterally) during the following clinical conditions: rest (5 s); right and left lateral excursions (5 s); protrusion (5 s); maximal dental clenching on Parafilm™ (4 s) and maximal voluntary contraction (4 s). This latter clinical condition was used as the normalization factor of the sample data. It was observed that individuals with osteoporosis presented greater EMG activity when maintaining mandible posture conditions and less activity during dental clenching and when obtaining maximal molar bite force. It may be concluded that facial osteoporosis can interfere on the patterns of masticatory muscle activation and maximal bite force of the stomatognathic system.

Carcinomas mamários de tipo basal: perfil clínico-patológico e evolutivo

OBJETIVO: Investigar a frequência de carcinomas mamários de fenótipo basal em uma série de tumores triplo-negativos (TTN), definidos pela negatividade para receptores de estrógeno (RE), de progesterona (RP) e HER2. MÉTODOS: Selecionamos 140 TTN, obtendo-se características clínico-patológicas e sobrevida. Microarranjo de tecido (2 cilindros de cada tumor) foi construído e submetido à imunoistoquímica para RE, RP, HER2, citoqueratinas (Cks) 5 e 14, EGFR, p63 e p53. Consideramos carcinomas de fenótipo basal os tumores negativos para RE, RP e HER2, e positivos para CK5. RESULTADOS: Encontramos 105 carcinomas de fenótipo basal entre 140 TTN (frequência=75%). A idade média das pacientes foi de 54,8 anos, sendo que 34,3% estavam na pré-menopausa. A maioria dos tumores foi classificada como carcinoma ductal invasor de alto grau. Os TTN exibiram positividade para CK5 (75,0%), CK14 (29%), EGFR (36,4%), p63 (28,6%) e p53 (67,1%). Estadiamento avançado da doença foi observado em 52 pacientes (50%), com diâmetro tumoral maior que 5 cm em 41 casos (39%) e metástases axilares em 61 casos (59,2%). Seguimento clínico foi obtido em 89 pacientes (média=51 meses). Destas, 45 pacientes (50,5%) evoluíram sem doença; 6 (6,7%) estavam vivas com doença e 38 (42,6%) morreram pelo câncer. Recidiva sistêmica ocorreu em 42 pacientes (47,1%), sendo pulmões, cérebro e ossos os principais sítios de metástases. As médias das sobrevidas global e livre de doença foram de 36 e 28 meses, respectivamente. CONCLUSÕES: Nosso estudo confirma comportamento clínico agressivo e elevada frequência dos carcinomas de fenótipo basal entre os TTN, semelhante ao descrito em casuísticas norte-americanas e europeias.

Trichomycterus dali: a new highly troglomorphic catfish (Silurifomes: Trichomycteridae) from Serra da Bodoquena, Mato Grosso do Sul State, Central Brazil

Trichomycterus dali, new species, is described from flooded limestone caves in Serra da Bodoquena karst area, State of Mato Grosso do Sul, Central Brazil. The new species is diagnosed by a unique character in the genus, the presence of conspicuous, ridge-like adipose folds lining dorsally throughout the body. Trichomycterus dali can be further distinguished readily from epigean congeners by the reduction of eyes and skin pigmentation (except for T. gorgona), and from remaining congeners (i.e., all hypogean plus T. gorgona) by the total loss of eyes, not visible externally (except for T. sandovali and T. spelaeus). Other diagnostic features includes very long barbels, especially the nasal (99.3-143.5% HL) and the maxillary (97.0-131.3% HL), pectoral-fin ray count reaching I,9 and a unique cranial fontanel with a conspicuous constriction on the meeting point of supraoccipital and the two frontal bones. The troglobitic status of the species is suggested by the presence of troglomorphisms on an advanced degree, especially the reduction of skin pigmentation, the total loss of eyes and the enlarged barbels. In addition, the presence of a well developed adipose fold in adults may indicate a distinctive adaptation acquired by neoteny to withstand the food scarce conditions of its hypogean habitat.

Stress distribution in the cervical region of an upper central incisor in a 3D finite element model

The aim of this study was to evaluate the stress distribution in the cervical region of a sound upper central incisor in two clinical situations, standard and maximum masticatory forces, by means of a 3D model with the highest possible level of fidelity to the anatomic dimensions. Two models with 331,887 linear tetrahedral elements that represent a sound upper central incisor with periodontal ligament, cortical and trabecular bones were loaded at 45º in relation to the tooth's long axis. All structures were considered to be homogeneous and isotropic, with the exception of the enamel (anisotropic). A standard masticatory force (100 N) was simulated on one of the models, while on the other one a maximum masticatory force was simulated (235.9 N). The software used were: PATRAN for pre- and post-processing and Nastran for processing. In the cementoenamel junction area, tensile forces reached 14.7 MPa in the 100 N model, and 40.2 MPa in the 235.9 N model, exceeding the enamel's tensile strength (16.7 MPa). The fact that the stress concentration in the amelodentinal junction exceeded the enamel's tensile strength under simulated conditions of maximum masticatory force suggests the possibility of the occurrence of non-carious cervical lesions such as abfractions.

Extensão máxima de retalho pediculado de omento maior através de túnel subcutâneo para ossos longos em cães

Há tempo sabe-se que o omento humano pode promover atividade angiogênica em estruturas adjacentes nas quais ele é aplicado. Na medicina veterinária, são poucas as pesquisas com retalho pediculado de omento maior como indutor angiogênico e imunogênico, porém suas propriedades de adesão e drenagem são bem conhecidas. Os objetivos deste estudo foram criar um retalho pediculado de omento maior, mensurar seu comprimento durante as etapas de criação e avaliar a possibilidade de alcance para ossos longos (fêmur, tíbia, úmero, rádio e ulna) através de túnel subcutâneo, visando a utilizá-lo futuramente como indutor angiogênico em focos de fratura, para aceleração da osteogênese e controle de infecções ósseas. Foram utilizados 30 cadáveres frescos de cães de todas as raças, com exceção dos condrodistróficos. Os resultados foram conclusivos e confirmaram a possibilidade de alcance do retalho de omento para ossos longos de cadáveres de cães em que todos os retalhos alcançaram a metáfise distal dos ossos avaliados. A média de comprimento do omento, em camada dupla, dos 30 animais avaliados foi de 30,87cm; da camada simples foi de 54,37cm e do retalho em L foi de 92,7cm. Com a extensão máxima do omento, foi possível alcançar as metáfises distais de todos os ossos propostos, com comprimento médio excedente de 29,87cm para fêmur, 20,73cm para tíbia/fíbula, 25,13cm para úmero e 16,27cm para rádio/ulna. As variáveis peso e retalho em L avaliadas estatisticamente de cada indivíduo apresentaram correlação positiva moderada. Concluiu-se que, em cadáveres de cães, é possível levar o retalho pediculado de omento maior através de túnel subcutâneo para metáfise distal de ossos longos e que, quanto maior o peso do animal, maior o comprimento do retalho em L.