Analysis of emergency braking performance with particular consideration of temperature effects on brakes

During vehicle deceleration due to braking there is friction between the lining surface and the brake drum or disc. In this process the kinetic energy of vehicle is turned into thermal energy that raises temperature of the components. The heating of the brake system in the course of braking is a great problem, because besides damaging the system, it may also affect the wheel and tire, which can cause accidents. In search of the best configuration that considers the true conditions of use, without passing the safety limits, models and formulations are presented with respect to the brake system, considering different braking conditions and kinds of brakes. Some modeling was analyzed using well-known methods. The flat plate model considering energy conservation was applied to a bus, using for this a computer program. The vehicle is simulated to undergo an emergency braking, considering the change of temperature on the lining-drum. The results include deceleration, braking efficiency, wheel resistance, normal reaction on the tires and the coefficient of adhesion. Some of the results were compared with dynamometer tests made by FRAS-LE and others were compared with track tests made by Mercedes-Benz. The convergence between the results and the tests is sufficient to validate the mathematical model. The computer program makes it possible to simulate the brake system performance in the vehicle. It assists the designer during the development phase and reduces track tests.

Suodattimen simulointi Aspen Plus simulointiohjelmistolla

Tässä työssä tutkittiin Aspen Plus-ohjelmiston soveltuvuutta suodattimen simulointiin. Tämän työn kirjallisuusosassa on esitelty eri suodatusmekanismit sekä joitain prosessisimulointiin soveltuvia ohjelmistoja lähdekirjallisuuden perusteella. Kokeellisessa osassa on tutkittu Aspen Plus-ohjelmiston soveltuvuutta suodattimen simuloimiseen. Simulointi suoritettiin käyttäen Aspenin suodatinmoduulin suunnittelumallia. Lähtökohtana käytettiin buchnersuppilolla ZnS-suspensiolle tehtyä koesuodatusta, jonka perusteella saatiin lähtöparametrien, kuten kakun- ja kankaan vastusten arvot. Simuloinnissa mitoitettiin samalle kapasiteetille rumpusuodatin, jonka suodatuspinta-alaa ja kiintoainekakun tilavuutta verrattiin koesuodatuksen vastaaviin arvoihin. Lisäksi vastaava simulointi suoritettiin filtration-and-separation.com sivuston omaa vakiopaineisen vakuumisuodattimen simulointiin tarkoitettua laskentapohjaa käyttäen, jonka tuloksia verrattiin myös Aspenilla saatuihin simulointituloksiin.

Mixing in rotating drums

Tämän diplomityön tarkoitus on parantaa meesauunin toiminnallista tehokkuutta tehostamalla lämmönsiirtoa. Lämmönsiirron parantamiseksi kehitetään erilaisia nostinratkaisuja. Kokeita suoritetaan käyttäen eri sekoitinratkaisuja ja erilaisia prosessiparametreja. Työn kirjallisuusosassa esitetään meesauuni sekä rumpumaisten uunien toiminta. Työssä selvitetään myös sekoituksen analysointiin käytettäviä tapoja ja laskukaavoja. Kirjallisuusosassa keskitytään myös rummussa tapahtuviin fysikaalisiin ilmiöihin sekä erilaisten fluidien reologiaan. Työn kokeellisessa osassa käytettiin LUT Kemiantekniikalla suunniteltua pilot -kokoluokan rumpu-uunia, jolla kokeitaan suoritettiin, käyttäen erilaisia sekoitinratkaisuja ja sekoitusprosessiparametreja. Kokeissa käytettiin myös eri viskositeetin omaavia materiaaleja. Valitut materiaalit olivat vesi, CMC (karboksimetyyliselluloosa) ja kiinteä meesa. Kokeiden tuloksena löydettiin nostinratkaisuja, joilla sekoittumista ja lämmönsiirtoa pystytään parantamaan sekä pidentämään viipymäaikaa.

Kuorimarummun kantokehän ja lohkon valmistuksen ja vaihdon kriittiset menestystekijät

TIIVISTELMÄ Lappeenrannan teknillinen yliopisto Teknillinen tiedekunta Konetekniikan koulutusohjelma Sami Suvanto Kuorimarummun kantokehän ja lohkon valmistuksen ja vaihdon kriittiset menestystekijät. Diplomityö 2014 64 sivua, 16 kuvaa, 5 taulukkoa, 1 liite Tarkastajat: Professori Jukka Martikainen DI Jari Junninen Hakusanat: kuorimo, kuorimarumpu, kantokehä, vaippalohko, hitsaus Keywords: wood room, debarking drum, support ring, drum shell, welding Sellutehtaiden puunkäsittelylaitoksilla kuorimarumpu on yksi tärkeimmistä prosessilaitteista. Kuorimarummun kantokehän tai lohkon vaihto on tyypillisesti koko puunkäsittelyn elinkaaren merkittävin korjausinvestointi. Markkinoilla on muutamia laitevalmistajia, jotka kilpailevat omien, sekä kilpailijoiden kuorimarumpujen korjausurakoista. Tässä diplomityössä selvitetään kuorimarummun kantokehän ja lohkonvaihtourakoiden kriittiset menestystekijät. Selvitys tehdään arvioimalla tekninen konstruktio, vaihtomenetelmät, sekä toimintamalli vaihtoprojektin suorittamisessa. Case tutkimukseen valittiin yksi kilpailijalle hävitty vaippalohkon vaihtotarjous, yksi kilpailijalle hävitty kantokehän vaihtotarjous, sekä yksi kantokehätoimitus. Työn tuloksena vahvuudet ja heikkoudet kuorimarummun kunnossapidossa tulivat esiin. Työn aikana löydettiin myös lukuisia kehitysideoita. Näitä ideoita viedään eteenpäin normaalina kehitystyönä.

Rumpusuotimen tuottavuuden kehittäminen

Tämä työ käsittelee imurumpusuotimen mekaanisen rakenteen kehittämistä. Työn tavoitteena on ollut tutkia ja kehittää imurumpusuotimen rakennetta siten, että sen valmistuksen kokonaiskustannukset pienentyisivät alkuperäiseen rakenteeseen verraten. Rakenteen kehittäminen aloitettiin tutkimalla käytössä olevien kolmen konstruktion eri osakokoonpanoja ja kokonaisuutta sekä vertailemalla niiden poikkeavuuksia keskenään ja etsimään modulaarisia yhteneväisyyksiä osakokoonpanojen kesken. Rakenteesta valittiin yksi osakokoonpano, jota kehitettiin järjestelmällisen suunnitteluprosessin menetelmin. Suunnitteluprosessissa rakenteelle on kehitetty useita vaihtoehtoisia ratkaisuja, joista yksi valittiin jatkokehittelyn kohteeksi. Valintaa varten alkuperäisen rumpusuotimen suorituskyky arviointiin ja sen perusteella arvioitiin uusien vaihtoehtojen suorituskykyä. Työn lopputuloksena on esitetty yksi vaihtoehtoinen konstruktio rummulle, jolla nykyisen rumpusuotimen tuottavuutta voidaan parantaa. Lisäksi työn aikana selvitettiin ulkopuolisen meesan irrottamismenetelmän käytettävyyttä testaten suomalaisella sellutehtaalla CPR imurumpusuotimella.

Pituusleikkureiden 3D-suunnittelun kehittäminen

Tämä diplomityö tehtiin Valmet Technologies Oy:n Järvenpään toimipisteelle. Työn tavoitteena oli tutkia miten pituusleikkureiden 3D-suunnittelua voidaan tehostaa hyödyntämällä uuden 3D-CAD -järjestelmän ominaisuuksia optimaalisesti. Työ koostuu teoriaosuudesta, haastattelututkimuksesta sekä käytännön osuudesta. Teoriaosuudessa perehdytään pituusleikkurin toimintaan ja rakenteeseen, 3D-suunnittelun teoriaan sekä CATIA-järjestelmään. Teoriaosuudessa etsitään myös uusia näkökulmia 3D-suunnitteluun. Haastattelututkimuksessa kartoitetaan nykyinen suunnitteluprosessi, suunnittelun kehitettäviä kohteita, sekä käytössä olevia suunnittelumenetelmiä, jotka ovat todettu toimiviksi. Haastattelututkimuksessa haastatellaan Valmet Technologies Oy:n Järvenpään toimipisteessä työskenteleviä pituusleikkureiden pääsuunnittelijoita sekä heidän esimiehiään. Lisäksi erillisten haastattelujen avulla kerätään kokemuksia CATIA V6 -ohjelmiston käytöstä sekä suunnitteluohjelmiston vaihtumisesta. Käytännön osuuden tavoitteena on arvioida pituusleikkurin parametroitujen mallirakenteiden siirtämiseen sekä korjauksiin kuluvia aikamääriä kyseisiin toimenpiteisiin tarvittavien resurssien määrittämiseksi. Käytännön osuudessa siirretään kaksi Valmet OptiWin Drum Compact -pituusleikkurin parametroitua osakokonaisuutta uuteen CAD-järjestelmään ja niille suoritetaan tarvittavat korjaustoimenpiteet Tutkimuksen tulosten perusteella yhteisen mallinnusmetodologian puuttuminen on merkittävin kehityskohde suunnittelun kehittämisessä. Lopuksi luotiin kehitysehdotukset sekä implementointisuunnitelma, joiden avulla pituusleikkureiden 3D-suunnittelua voidaan kehittää ja CATIA V6 -ohjelmisto voidaan ottaa käyttöön tehokkaasti.

Some Incidents and Circumstances

- The first part of the document traces Mr. Haile’s lineage. His father, James Haile was a farmer. His grandfather, Amos Haile was a sailor for the early part of his life. He was placed on a British man-of- war in about 1758. He escaped and settled in Putney. (p.1) - His father’s mother’s maiden name was Parker. His mother’s maiden name was Campbell. Her father was a captain in the Revolutionary Army. (p.2) - His earliest memories revolve around the death of his aunt and the funeral of General Washington (although he did not witness this). At the time, his father was a Lieutenant in a regiment militia of Light Dragoons who wore red coats. (p.3) - In 1804, an addition was added to the Haile house which necessitated that William was to stay home to help with the building. He continued to study and read on his own. He was particularly interested in Napoleon Bonaparte’s victories. In that same year he was sent to Fairfield Academy where Reverend Caleb Alexander was the principal. (p.4) - On June 1, 1812, William was appointed as an Ensign in the Infantry of the Army of the United States. He was put into the recruiting service at Nassau (20 miles east of Albany) where he remained until September. (p.4) - He was assigned to the 11th Regiment of the W.S. Infantry and directed to proceed to Plattsburgh to report to Colonel Isaac Clark. (p.7) - He was assigned to the company commanded by Captain Samuel H. Halley who was not in the best of health and often absent. For a good part of the time William was in charge of the company. (p.8) - The 11th Regiment was encamped beside the 15th Regiment commanded by Col. Zebulon Montgomery Pike [Pike’s Peak was named after him]. Col. Pike generously drilled and disciplined the 11th Regiment since their officers didn’t seem capable of doing so. (p.8) - The first brigade to which William’s regiment was attached to was commanded by Brigadier General Bloomfield of New Jersey. Brigadier Chandler of Maine commanded the second brigade. (p.9) - At the beginning of November, Major General Dearborn took command of the army. He had been a good officer in his time, but William refers to him as “old and inefficient” earning him the nickname “Granny Dearborn” (p.9) - On November 17th, 1812, General Dearborn moved north with his army. The troops ended up in Champlain. There was no fighting, only a skirmish between a party of men under Colonel Pike and a few British troops who he succeeded in capturing. (p.10) - The troops were moved to barracks for the winter. Colonel Pike’s troops were put into suitable barracks and kept healthy but another part of the army (including the 11th Regiment) were sent to a barracks of green lumber north of Burlington. Disease soon broke out in the damp barracks and the hundreds of deaths soon followed. One morning, William counted 22 bodies who had died the previous night. He puts a lot of this down to an inexperienced commanding officer, General Chandler. (p.11) - At the beginning of 1813, William was stationed as a recruiter on the shore of Shoreham across from Fort Ticonderoga. In February, he returned to Burlington with his recruits. In March he received an order from General Chandler to proceed to Whitehall and take charge of the stores and provisions. In April and May it was decided that his half of the regiment (the First Battalion) should march to Sackett’s Harbour, Lake Ontario. They arrived at Sackett’s Harbour about the 10th of June, a few days after the Battle of Sackett’s Harbour. (p.12) - He was camped near the site of Fort Oswego and got word to head back to Sackett’s Harbour. A storm overtook the schooner that he was on. (p.14) - William was involved in the Battle of Williamsburg (or Chrysler’s Farm) which he calls a “stupid and bungling affair on the part of our generals”.(p. 18) - General Covington was wounded and died a few days after the battle. (p.19) - William speaks of being ill. The troops were ordered to march to Buffalo, but he is able to go to his father’s house in Fairfield where his mother nursed him back to health (p.23) - Upon arrival at Buffalo, the “old fogy Generals” were replaced with younger, more efficient men. (p.25) - On page 27 he sums up a few facts: In 1812, the army was assembled on Lake Champlain with the intention of capturing Montreal, and then Quebec. That year, under General Dearborn the army marched as far as Champlain, then turned back and went into winter quarters. In 1813, the army was assembled at Sackett’s Harbour and that year the campaign ended at French Mills which was 70 or 80 miles from Montreal. In 1814, the army at Buffalo were some 400 miles from Montreal with still the same object in view. - He says that these facts make “a riddle – difficult to explain”. (p.27) - On the evening of July 2nd they embarked on the boats with the objective of capturing Fort Erie. The enemy were all made prisoners of war (p.27) - On July 4th they went to Street’s Creek, 2 miles above the Chippewa [Chippawa] River (p.28) - Page 29 is titled The Battle of Chippewa [Chippawa] - He speaks of 2 drummers who were fighting over the possession of a drum when a cannonball came along and took of both of their heads (p.29) - He proclaims that this was one of the “most brilliant battles of the war”. The battle was fought and won in less than an hour after they left their tents. He credits General Scott with this success and states that was due to his rapid orders and movements. (p.30) - The dead of the battle remained on the field during the night. He describes this as quite gloomy seeing friend and foe lying side by side. At daybreak they set to work digging trenches to bury the dead. (p.31) - Colonel Campbell was wounded and advised to have his leg amputated. He refused, and subsequently died. (p.32) - It is said that the British threw several of their dead into the river and they went over the Falls. (p.32) - His troops repaired the bridge over Chippawa which the enemy had partially destroyed and then pursued the British as far as Queenston Heights. (p.32) - On pages 33 and 34 he speaks about meeting an old friend of his, Philip Harter. - The account ends at Queenston Heights

Spectacle and the one-man band : technology, performing bodies, and imaginary spaces

L’étiquette « homme-orchestre » est apposée à une grande variété de musiciens qui se distinguent en jouant seuls une performance qui est normalement interprétée par plusieurs personnes. La diversité qu’a pu prendre au cours du temps cette forme n’est pas prise en compte par la culture populaire qui propose une image relativement constante de cette figure tel que vue dans les films Mary Poppins (1964) de Walt Disney et One-man Band (2005) de Pixar. Il s’agit d’un seul performeur vêtu d’un costume coloré avec une grosse caisse sur le dos, des cymbales entre les jambes, une guitare ou un autre instrument à cordes dans les mains et un petit instrument à vent fixé assez près de sa bouche pour lui permettre d’alterner le chant et le jeu instrumental. Cette thèse propose une analyse de l’homme-orchestre qui va au-delà de sa simple production musicale en situant le phénomène comme un genre spectaculaire qui transmet un contenu symbolique à travers une relation tripartite entre performance divertissante, spectateur et image. Le contenu symbolique est lié aux idées caractéristiques du Siècle des lumières tels que la liberté, l’individu et une relation avec la technologie. Il est aussi incarné simultanément par les performeurs et par la représentation de l’homme-orchestre dans l’imaginaire collectif. En même temps, chaque performance sert à réaffirmer l’image de l’homme-orchestre, une image qui par répétitions est devenue un lieu commun de la culture, existant au-delà d’un seul performeur ou d’une seule performance. L’aspect visuel de l’homme-orchestre joue un rôle important dans ce processus par une utilisation inattendue du corps, une relation causale entre corps, technologie et production musicale ainsi que par l’utilisation de vêtements colorés et d’accessoires non musicaux tels des marionnettes, des feux d’artifice ou des animaux vivants. Ces éléments spectaculaires divertissent les spectateurs, ce qui se traduit, entre autres, par un gain financier pour le performeur. Le divertissement a une fonction phatique qui facilite la communication du contenu symbolique.

Resonance Frequencies of Compact Microstrip Antenna

The arrow shaped microstrip antenna, which produces dual frequency dual polarisation operation with considera-ble size reduction compared to conventional patches has been reported [I]. These antennas provide greater area reduction and improved gain compared to drum shaped patches [2]. Prediction of the resonance frequency of drum shaped patches [3] and circular patches for broadband operation [4] are available in the literature. In this Letter, we propose empirical formulas for calculating the resonance frequencies of the arrow shaped microstrip antenna. These antennas can be employed for obtaining dual frequency with the same polarisation, bandwidth enhancement, circular polarisation etc. by varying its different parameters or by introducing slots. The proposed design equations provide an easier and simple way of predicting the resonant frequencies of these patches.

BROADBAND WIDE COVERAGE UNIPLANAR ANTENNA

The Present thesis deals with the numerical as well as experimental investigations conducted on the resonance and radiation characteristics of Drum shaped monopole antenna, Funnel shaped monopole antenna and the shorted coplanar antenna.An introduction to the over view of antennas, state of the art planar antenna technologies, different feeding techniques and introduction of coplanar waveguides have been discussed.

Simultaneous Drying and Separation of Composite Agricultural Material for Hay Processing

In composite agricultural materials such as grass, tee, medicinal plants; leaves and stems have a different drying time. By this behavior, after leaving the dryer, the stems may have greater moisture content than desired, while the leaves one minor, which can cause either the appearance of fungi or the collapse of the over-dried material. Taking into account that a lot of grass is dehydrated in forced air dryers, especially rotary drum dryers, this research was developed in order to establish conditions enabling to make a separation of the components during the drying process in order to provide a homogeneous product at the end. For this, a rotary dryer consisting of three concentric cylinders and a circular sieve aligned with the more internal cylinder was proposed; so that, once material enters into the dryer in the area of the inner cylinder, stems pass through sieve to the middle and then continue towards the external cylinder, while the leaves continue by the inner cylinder. For this project, a mixture of Ryegrass and White Clover was used. The characteristics of the components of a mixture were: Drying Rate in thin layer and in rotation, Bulk density, Projected Area, Terminal velocity, weight/Area Ratio, Flux through Rotary sieve. Three drying temperatures; 40°C, 60° C and 80° C, and three rotation speeds; 10 rpm, 20 rpm and 40 rpm were evaluated. It was found that the differences in drying time are the less at 80 °C when the dryer rotates at 40 rpm. Above this speed, the material adheres to the walls of the dryer or sieve and does not flow. According to the measurements of terminal velocity of stems and leaves of the components of the mixture, the speed of the air should be less than 1.5 m s-1 in the inner drum for the leaves and less than 4.5 m s-1 in middle and outer drums for stems, in such way that only the rotational movement of the dryer moves the material and achieves a greater residence time. In other hand, the best rotary sieve separation efficiencies were achieved when the material is dry, but the results are good in all the moisture contents. The best rotary speed of sieve is within the critical rotational speed, i.e. 20 rpm. However, the rotational speed of the dryer, including the sieve in line with the inner cylinder should be 10 rpm or less in order to achieve the greatest residence times of the material inside the dryer and the best agitation through the use of lifting flights. With a finite element analysis of a dryer prototype, using an air flow allowing speeds of air already stated, I was found that the best performance occurs when, through a cover, air enters the dryer front of the Middle cylinder and when the inner cylinder is formed in its entirety through a sieve. This way, air flows in almost equal amounts by both the middle and external cylinders, while part of the air in the Middle cylinder passes through the sieve towards the inner cylinder. With this, leaves do not adhere to the sieve and flow along drier, thanks to the rotating movement of the drums and the showering caused by the lifting flights. In these conditions, the differences in drying time are reduced to 60 minutes, but the residence time is higher for the stems than for leaves, therefore the components of the mixture of grass run out of the dryer with the same desired moisture content.

Análisis de la Cooperación Multilateral para la Gestión de biodiversidad en Instituciones Subregionales. Caso de Estudio: Estrategia regional para la conservación y uso Sostenible de recursos en el Amazonas (TCA) y Proyecto Facilitación de financiamiento para negocios de biodiversidad y apoyo al desarrollo de actividades del mercado en la Región Andina (CAN) 2000-2009

Este trabajo de investigación analiza la importancia de la cooperación internacional para la gestión de biodiversidad entregada por el Global Environmental Facilty-GEF, para la conservación y uso sostenible de la biodiversidad en la cuenca Andino-amazónica. Esto a través del estudio de los proyectos de alcance regional financiados a dos instituciones subregionales, el primero, “Estrategia Regional para la Conservación y Uso Sostenible de Recursos en el Amazonas” perteneciente al Tratado de Cooperación Amazónica-TCA, y el segundo, “Facilitación de Financiamiento para Negocios de Biodiversidad y Apoyo al Desarrollo de Actividades de Mercado en la Región Andina” presentado por la Banco de Desarrollo de América Latina-CAF.

Método de Batería Plinio Córdoba Valencia. Iniciativa para la salvaguardia del patrimonio cultural inmaterial y los tesoros humanos vivos de Colombia

Proyecto de Gestión Cultural que busca visibilizar la vida y obra del Maestro Plinio Córdoba Valencia, baterista y precursor del Jazz en Colombia, a través del diseño de su Método de Batería.

Modelling fatigue damage distribution to inform slip and cut policy for riser tensioner ropes

The paper describes a method whereby the distribution of fatigue damage along riser tensioner ropes is calculated, taking account of heave motion, set tension, system geometry, tidal range and rope specification. From these data the distribution of damage along the rope is calculated for a given time period using a Miner’s summation method. This information can then be used to help the operator decide on the length of rope to ‘slip and cut’ whereby a length from the end of the rope is removed and the rope moved through the system from a storage drum such that sections of rope that have already suffered significant fatigue damage are not moved to positions where there is another peak in the distribution. There are two main advantages to be gained by using the fatigue damage model. The first is that it shows the amount of fatigue damage accumulating at different points along the rope, enabling the most highly damaged section to be removed well before failure. The second is that it makes for greater efficiency, as damage can be spread more evenly along the rope over time, avoiding the need to scrap long sections of undamaged rope.