The Relative Efficiency of Automatic and Discretionary Industrial Aid

For the last two decades, the primary instruments for UK regional policy have been discretionary subsidies. Such aid is targeted at “additional” projects - projects that would not have been implemented without the subsidy - and the subsidy should be the minimum necessary for the project to proceed. Discretionary subsidies are thought to be more efficient than automatic subsidies, where many of the aided projects are non-additional and all projects receive the same subsidy rate. The present paper builds on Swales (1995) and Wren (2007a) to compare three subsidy schemes: an automatic scheme and two types of discretionary scheme, one with accurate appraisal and the other with appraisal error. These schemes are assessed on their expected welfare impacts. The particular focus is the reduction in welfare gain imposed by the interaction of appraisal error and the requirements for accountability. This is substantial and difficult to detect with conventional evaluation techniques.

Joint estimates of automatic and discretionary fiscal policy for the OECD

Official calculations of automatic stabilizers are seriously flawed since they rest on the assumption that the only element of social spending that reacts automatically to the cycle is unemployment compensation. This puts into question many estimates of discretionary fiscal policy. In response, we propose a simultaneous estimate of automatic and discretionary fiscal policy. This leads us, quite naturally, to a tripartite decomposition of the budget balance between revenues, social spending and other spending as a bare minimum. Our headline results for a panel of 20 OECD countries in 1981-2003 are .59 automatic stabilization in percentage-points of primary surplus balances. All of this stabilization remains following discretionary responses during contractions, but arguably only about 3/5 of it remains so in expansions while discretionary behavior cancels the rest. We pay a lot of attention to the impact of the Maastricht Treaty and the SGP on the EU members of our sample and to real time data.

Joint estimates of automatic and discretionary fiscal policy: the OECD 1981-2003

Official calculations of automatic stabilizers are seriously flawed since they rest on the assumption that the only element of social spending that reacts automatically to the cycle is unemployment compensation. This puts into question many estimates of discretionary fiscal policy. In response, we propose a simultaneous estimate of automatic and discretionary fiscal policy. This leads us, quite naturally, to a tripartite decomposition of the budget balance between revenues, social spending and other spending as a bare minimum. Our headline results for a panel of 20 OECD countries in 1981-2003 are .59 automatic stabilization in percentage-points of primary surplus balances. All of this stabilization remains following discretionary responses during contractions, but arguably only about 3/5 of it remains so in expansions while discretionary behavior cancels the rest. We pay a lot of attention to the impact of the Maastricht Treaty and the SGP on the EU members of our sample and to real time data.

Joint estimates of automatic and discretionary fiscal policy: the OECD 1981-2003

Official calculations of automatic stabilizers are seriously flawed since they rest on the assumption that the only element of social spending that reacts automatically to the cycle is unemployment compensation. This puts into question many estimates of discretionary fiscal policy. In response, we propose a simultaneous estimate of automatic and discretionary fiscal policy. This leads us, quite naturally, to a tripartite decomposition of the budget balance between revenues, social spending and other spending as a bare minimum. Our headline results for a panel of 20 OECD countries in 1981-2003 are .59 automatic stabilization in percentage-points of primary surplus balances. All of this stabilization remains following discretionary responses during contractions, but arguably only about 3/5 of it remains so in expansions while discretionary behavior cancels the rest. We pay a lot of attention to the impact of the Maastricht Treaty and the SGP on the EU members of our sample and to real time data.

Intraobserver and interobserver variability of ascending aorta diameter measurements as assessed by ECG-gated MDCT : automatic versus manual measurements : P15

Purpose: Revolutionary endovascular treatments are on the verge of being available for management of ascending aortic diseases. Morphometric measurements of the ascending aorta have already been done with ECG-gated MDCT to help such therapeutic development. However the reliability of these measurements remains unknown. The objective of this work was to compare the intraobserver and interobserver variability of CAD (computer aided diagnosis) versus manual measurements in the ascending aorta. Methods and materials: Twenty-six consecutive patients referred for ECG-gated CT thoracic angiography (64-row CT scanner) were evaluated. Measurements of the maximum and minimum ascending aorta diameters at mid-distance between the brachiocephalic artery and the aortic valve were obtained automatically with a commercially available CAD and manually by two observers separately. Both observers repeated the measurements during a different session at least one month after the first measurements. Intraclass coefficients as well the Bland and Altman method were used for comparison between measurements. Two-paired t-test was used to determine the significance of intraobserver and interobserver differences (alpha = 0.05). Results: There is a significant difference between CAD and manual measurements in the maximum diameter (p = 0.004) for the first observer, whereas the difference was significant for minimum diameter between the second observer and the CAD (p <0.001). Interobserver variability showed a weak agreement when measurements were done manually. Intraobserver variability was lower with the CAD compared to the manual measurements (limits of variability: from -0.7 to 0.9 mm for the former and from -1.2 to 1.3 mm for the latter). Conclusion: In order to improve reproductibility of measurements whenever needed, pre- and post-therapeutic management of the ascending aorta may benefit from follow-up done by a unique observer with the help of CAD.

Automatic front-crawl temporal phase detection using adaptive filtering of inertial signals

This study introduces a novel approach for automatic temporal phase detection and inter-arm coordination estimation in front-crawl swimming using inertial measurement units (IMUs). We examined the validity of our method by comparison against a video-based system. Three waterproofed IMUs (composed of 3D accelerometer, 3D gyroscope) were placed on both forearms and the sacrum of the swimmer. We used two underwater video cameras in side and frontal views as our reference system. Two independent operators performed the video analysis. To test our methodology, seven well-trained swimmers performed three 300 m trials in a 50 m indoor pool. Each trial was in a different coordination mode quantified by the index of coordination. We detected different phases of the arm stroke by employing orientation estimation techniques and a new adaptive change detection algorithm on inertial signals. The difference of 0.2 +/- 3.9% between our estimation and video-based system in assessment of the index of coordination was comparable to experienced operators' difference (1.1 +/- 3.6%). The 95% limits of agreement of the difference between the two systems in estimation of the temporal phases were always less than 7.9% of the cycle duration. The inertial system offers an automatic easy-to-use system with timely feedback for the study of swimming.

Aplicación para la gestión de un sistema de incidencias de un almacén robotizado

Aquest projecte té com objectiu fer un sistema d’incidències pel control d’un magatzem robotitzat i del cost que comporta la resolució d’aquestes. D’aquesta manera es pretén canviar un mètode de treball rudimentari, passant a un altre totalment estructurat que serveixi per millorar el actual. Per això s’ha creat una aplicació basada en la tecnologia JSF, què permet aconseguir els nostres objectius. L’aplicació inclou una base de dades feta en PostGres SQL on es guardarà tota la informació que s’utilitza en la nostra aplicació. En aquesta memòria s’ha volgut explicar quins han estat els diferents passos que es van donar per poder assolir tots els nostres objectius. En la primera part realitzem una introducció a la situació del problema que es vol solucionar i descriurem els objectius que en hem marcat. Seguidament s’analitzen els requeriments i es detalla com s’implementen les diferents parts de l’aplicació. Per acabar parlem sobre el procés de testing realitzat que ens assegura el correcte funcionament del programa. Resumint, el objectiu principal d’aquest projecte consisteix en crear una eina que a la vegada que facilita la feina dels treballadors del magatzem, serveixi per al control de tot el sistema de treball als directius de l’empresa.

Automatic DVB signal analyser

El problema de controlar les emissions de televisió digital a tota Europa pel desenvolupament de receptors robustos i fiables és cada vegada més significant, per això, sorgeix la necessitat d’automatitzar el procés d’anàlisi i control d’aquests senyals. Aquest projecte presenta el desenvolupament software d’una aplicació que vol solucionar una part d’aquest problema. L’aplicació s’encarrega d’analitzar, gestionar i capturar senyals de televisió digital. Aquest document fa una introducció a la matèria central que és la televisió digital i la informació que porten els senyals de televisió, concretament, la que es refereix a l’estàndard "Digital Video Broadcasting". A continuació d’aquesta part, l’escrit es concentra en l’explicació i descripció de les funcionalitats que necessita cobrir l'aplicació, així com introduir i explicar cada etapa d’un procés de desenvolupament software. Finalment, es resumeixen els avantatges de la creació d’aquest programa per l’automatització de l’anàlisi de senyal digital partint d’una optimització de recursos.

The Multiple-partners assignment game with heterogeneous sales and multi-unit demands: competitive equilibria

A multiple-partners assignment game with heterogeneous sales and multiunit demands consists of a set of sellers that own a given number of indivisible units of (potentially many different) goods and a set of buyers who value those units and want to buy at most an exogenously fixed number of units. We define a competitive equilibrium for this generalized assignment game and prove its existence by using only linear programming. In particular, we show how to compute equilibrium price vectors from the solutions of the dual linear program associated to the primal linear program defined to find optimal assignments. Using only linear programming tools, we also show (i) that the set of competitive equilibria (pairs of price vectors and assignments) has a Cartesian product structure: each equilibrium price vector is part of a competitive equilibrium with all optimal assignments, and vice versa; (ii) that the set of (restricted) equilibrium price vectors has a natural lattice structure; and (iii) how this structure is translated into the set of agents' utilities that are attainable at equilibrium.

On Cooperative solutions of a generalized assignment game: limit theorems to the set of competitive equilibria

We study two cooperative solutions of a market with indivisible goods modeled as a generalized assignment game: Set-wise stability and Core. We first establish that the Set-wise stable set is contained in the Core and it contains the non-empty set of competitive equilibrium payoffs. We then state and prove three limit results for replicated markets. First, the sequence of Cores of replicated markets converges to the set of competitive equilibrium payoffs when the number of replicas tends to infinity. Second, the Set-wise stable set of a two-fold replicated market already coincides with the set of competitive equilibrium payoffs. Third, for any number of replicas there is a market with a Core payoff that is not a competitive equilibrium payoff.

On the automatic application of inequality indexes in the analysis of the international distribution of environmental indicators

In recent years traditional inequality measures have been used to quite a considerable extent to examine the international distribution of environmental indicators. One of its main characteristics is that each one assigns different weights to the changes that occur in the different sections of the variable distribution and, consequently, the results they yield can potentially be very different. Hence, we suggest the appropriateness of using a range of well-recommended measures to achieve more robust results. We also provide an empirical test for the comparative behaviour of several suitable inequality measures and environmental indicators. Our findings support the hypothesis that in some cases there are differences among measures in both the sign of the evolution and its size. JEL codes: D39; Q43; Q56. Keywords: international environment factor distribution; Kaya factors; Inequality measurement

Pseudomarkets with priorities in large random assignment economies

I study large random assignment economies with a continuum of agents and a finite number of object types. I consider the existence of weak priorities discriminating among agents with respect to their rights concerning the final assignment. The respect for priorities ex ante (ex-ante stability) usually precludes ex-ante envy-freeness. Therefore I define a new concept of fairness, called no unjustified lower chances: priorities with respect to one object type cannot justify different achievable chances regarding another object type. This concept, which applies to the assignment mechanism rather than to the assignment itself, implies ex-ante envy-freeness among agents of the same priority type. I propose a variation of Hylland and Zeckhauser' (1979) pseudomarket that meets ex-ante stability, no unjustified lower chances and ex-ante efficiency among agents of the same priority type. Assuming enough richness in preferences and priorities, the converse is also true: any random assignment with these properties could be achieved through an equilibrium in a pseudomarket with priorities. If priorities are acyclical (the ordering of agents is the same for each object type), this pseudomarket achieves ex-ante efficient random assignments.

Intraobserver and interobserver variability of ascending aorta diameter as assessed with ECG-gated MDCT: automatic versus manual measurements

Purpose: Recently morphometric measurements of the ascending aorta have been done with ECG-gated MDCT to help the development of future endovascular therapies (TCT) [1]. However, the variability of these measurements remains unknown. It will be interesting to know the impact of CAD (computer aided diagnosis) with automated segmentation of the vessel and automatic measurements of diameter on the management of ascending aorta aneurysms. Methods and Materials: Thirty patients referred for ECG-gated CT thoracic angiography (64-row CT scanner) were evaluated. Measurements of the maximum and minimum ascending aorta diameters were obtained automatically with a commercially available CAD and semi-manually by two observers separately. The CAD algorithms segment the iv-enhanced lumen of the ascending aorta into perpendicular planes along the centreline. The CAD then determines the largest and the smallest diameters. Both observers repeated the automatic measurements and the semimanual measurements during a different session at least one month after the first measurements. The Bland and Altman method was used to study the inter/intraobserver variability. A Wilcoxon signed-rank test was also used to analyse differences between observers. Results: Interobserver variability for semi-manual measurements between the first and second observers was between 1.2 to 1.0 mm for maximal and minimal diameter, respectively. Intraobserver variability of each observer ranged from 0.8 to 1.2 mm, the lowest variability being produced by the more experienced observer. CAD variability could be as low as 0.3 mm, showing that it can perform better than human observers. However, when used in nonoptimal conditions (streak artefacts from contrast in the superior vena cava or weak lumen enhancement), CAD has a variability that can be as high as 0.9 mm, reaching variability of semi-manual measurements. Furthermore, there were significant differences between both observers for maximal and minimal diameter measurements (p<0.001). There was also a significant difference between the first observer and CAD for maximal diameter measurements with the former underestimating the diameter compared to the latter (p<0.001). As for minimal diameters, they were higher when measured by the second observer than when measured by CAD (p<0.001). Neither the difference of mean minimal diameter between the first observer and CAD nor the difference of mean maximal diameter between the second observer and CAD was significant (p=0.20 and 0.06, respectively). Conclusion: CAD algorithms can lessen the variability of diameter measurements in the follow-up of ascending aorta aneurysms. Nevertheless, in non-optimal conditions, it may be necessary to correct manually the measurements. Improvements of the algorithms will help to avoid such a situation.