Anti-obese activity of Butea monosperma (Lam) bark extract in experimentally induced obese rats

To study the efficacy of ethanolic extract of B. monosperma bark in cafeteria and atherogenic diet fed rats and monosodium glutamate (MSG) obese rats, different doses (200, 400 and 800 mg/kg) of ethanolic extract of B. monosperma bark showed dose dependent decrease in body weight, daily food intake, glucose, lipids, internal organs' weight and fat pad weight in cafeteria and atherogenic diet fed rats and monosodium glutamate obese rats. The results suggested that B. monosperma has significant anti-obese activity.

Functional analysis of ultra high information rates conveyed by rat vibrissal primary afferents

Sensory receptors determine the type and the quantity of information available for perception. Here, we quantified and characterized the information transferred by primary afferents in the rat whisker system using neural system identification. Quantification of ``how much'' information is conveyed by primary afferents, using the direct method (DM), a classical information theoretic tool, revealed that primary afferents transfer huge amounts of information (up to 529 bits/s). Information theoretic analysis of instantaneous spike-triggered kinematic stimulus features was used to gain functional insight on ``what'' is coded by primary afferents. Amongst the kinematic variables tested-position, velocity, and acceleration-primary afferent spikes encoded velocity best. The other two variables contributed to information transfer, but only if combined with velocity. We further revealed three additional characteristics that play a role in information transfer by primary afferents. Firstly, primary afferent spikes show preference for well separated multiple stimuli (i.e., well separated sets of combinations of the three instantaneous kinematic variables). Secondly, neurons are sensitive to short strips of the stimulus trajectory (up to 10 ms pre-spike time), and thirdly, they show spike patterns (precise doublet and triplet spiking). In order to deal with these complexities, we used a flexible probabilistic neuron model fitting mixtures of Gaussians to the spike triggered stimulus distributions, which quantitatively captured the contribution of the mentioned features and allowed us to achieve a full functional analysis of the total information rate indicated by the DM. We found that instantaneous position, velocity, and acceleration explained about 50% of the total information rate. Adding a 10 ms pre-spike interval of stimulus trajectory achieved 80-90%. The final 10-20% were found to be due to non-linear coding by spike bursts.

A general methodology for calculating mixed mode stress intensity factors and fracture toughness of solder joints with interfacial cracks

Solder joints in electronic packages undergo thermo-mechanical cycling, resulting in nucleation of micro-cracks, especially at the solder/bond-pad interface, which may lead to fracture of the joints. The fracture toughness of a solder joint depends on material properties, process conditions and service history, as well as strain rate and mode-mixity. This paper reports on a methodology for determining the mixed-mode fracture toughness of solder joints with an interfacial starter-crack, using a modified compact mixed mode (CMM) specimen containing an adhesive joint. Expressions for stress intensity factor (K) and strain energy release rate (G) are developed, using a combination of experiments and finite element (FE) analysis. In this methodology, crack length dependent geometry factors to convert for the modified CMM sample are first obtained via the crack-tip opening displacement (CTOD)-based linear extrapolation method to calculate the under far-field mode I and II conditions (f(1a) and f(2a)), (ii) generation of a master-plot to determine a(c), and (iii) computation of K and G to analyze the fracture behavior of joints. The developed methodology was verified using J-integral calculations, and was also used to calculate experimental fracture toughness values of a few lead-free solder-Cu joints. (C) 2014 Elsevier Ltd. All rights reserved.

Manipulating Crystallographic Texture of Sn Coatings by Optimization of Electrodeposition Process Conditions to Suppress Growth of Whiskers

The effects of two major electrodeposition process conditions, electrolyte bath temperature and current density, on the microstructure and crystallographic texture of pure tin coatings on brass and, ultimately, on the extent of whisker formation have been examined. The grain size of the deposited coatings increased with increasing electrolyte bath temperature and current density, which significantly affected the dominant texture: (211) or (420) was the dominant texture at low current densities whereas, depending on deposition temperature, (200) or (220) became the dominant texture at high current densities. After deposition, coatings were subjected to different environmental conditions, for example isothermal aging (room temperature, 50A degrees C, or 150A degrees C) for up to 90 days and thermal cycling between -25A degrees C and 85A degrees C for 100 cycles, and whisker growth was studied. The Sn coatings with low Miller index planes, for example (200) and (220), and with moderate aging temperature were more prone to whiskering than coating with high Miller index planes, for example (420), and high aging temperature. A processing route involving the optimum combination of current density and deposition temperature is proposed for suppressing whisker growth.

A pseudo-plastic engagement effect on the toughening of discontinuous fiber-reinforced brittle composites

In brittle composites, such as whisker reinforced ceramics, the sliding of reinforcing fibers against the frictional resistance of matrix is of a pseudo-plastic deformation mechanism. High aspect-ratio whiskers possess larger pseudo-plastic deformation ability but are usually sparse, while, low aspect-ratio ones were distributed widely in the matrix and show low pseudo-plastic deformation ability (engagement effect), also. A comparative investigation was carried out in present study based on a multi-scale network model. The results indicate that the effect of low aspect-ratio whiskers is of most importance. Improving the engagement coefficient by raising the compactness of material seems a more practical way for optimization of discontinuous fiber-reinforced brittle composites in the present technological condition.

短纤维/晶须增强金属基复合材料的弹塑性本构关系

研究了短纤维/晶须增强金属基复合材料在弹塑性变形中的应变分布, 得到了增强体与基体应变的统计规律, 提出了短纤维/晶须增强金属基复合材料的材料模型, 导出了相应的弹塑性本构关系, 预测了硼酸铝晶须增强Al基([AlBO]_w/Al)复合材料单轴拉伸应力应变关系, 结果与实验吻合良好.

Models for acoustic propagation through turbofan exhaust flows-lined ducts

Turbomachinery noise radiating into the rearward arc is an important problem. This noise is scattered by the trailing edges of the nacelle and the jet exhaust, and interacts with the shear layers between the external flow, bypass stream and jet, en route to the far field. In the past a range of relevant model problems involving semi-infinite cylinders have been solved. However, one limitation of these previous solutions is that they do not allow for the jet nozzle protruding a finite distance beyond the end of the nacelle (or in certain configurations being buried a finite distance upstream). With this in mind, we have used the matrix Wiener-Hopf technique to allow precisely this finite nacelle-jet nozzle separation to be included. We have previously reported results for the case of hard-walled ducts, which requires factorisation of a 2 × 2 matrix. In this paper we extend this work by allowing one of the duct walls, in this case the outer wall of the jet pipe, to be acoustically lined. This results in the need to factorise a 3 × 3 matrix, which is completed by use of a combination of pole-removal and Pad́e approximant techniques. Sample results are presented, investigating in particular the effects of exit plane stagger and liner impedance. Here we take the mean flow to be zero, but extension to nonzero Mach numbers in the core and bypass flow has also been completed. Copyright © 2009 by Nigel Peake & Ben Veitch.

Self-aligned, gated arrays of individual nanotube and nanowire emitters

We demonstrate the production of integrated-gate nanocathodes which have a single carbon nanotube or silicon nanowire/whisker per gate aperture. The fabrication is based on a technologically scalable, self-alignment process in which a single lithographic step is used to define the gate, insulator, and emitter. The nanotube-based gated nanocathode array has a low turn-on voltage of 25 V and a peak current of 5 μA at 46 V, with a gate current of 10 nA (i.e., 99% transparency). These low operating voltage cathodes are potentially useful as electron sources for field emission displays or miniaturizing electron-based instrumentation.

A finite-element analysis of viscoelastically damped sandwich plates

A finite element analysis associated with an asymptotic solution method for the harmonic flexural vibration of viscoelastically damped unsymmetrical sandwich plates is given. The element formulation is based on generalization of the discrete Kirchhoff theory (DKT) element formulation. The results obtained with the first order approximation of the asymptotic solution presented here are the same as those obtained by means of the modal strain energy (MSE) method. By taking more terms of the asymptotic solution, with successive calculations and use of the Padé approximants method, accuracy can be improved. The finite element computation has been verified by comparison with an analytical exact solution for rectangular plates with simply supported edges. Results for the same plates with clamped edges are also presented.

Thermal Residual Stresses in SiCw/Al Composite

<正> The SiCw/6061Al composites were fabricated by squeeze casting method. Varia-tions of thermal residual stresses with quenching temperature, cooling manner, aging time and thethermal-cold cycle process in thin specimens,and the distributions of thermal residual stresses alongthe distances from the surface and changes with heating temperatnres in thick specimens were stud-ied by means of X-ray diffraction (XRD). The effects of residual stresses on the mierostructure, di-mensional stability and age-hardening behavior were studied by SEM, TEM observations, and tensiletest. The results showed that there existed macrostress, microstress and thermal mismatch stress inSiCw/Al compo-site,and the presence of microstress and thermal mismatch stress has no influenceon the measurement of macrostress, but the macrostress can affect the measured value of thermalmismatch stress. Thermal res dual stress induced during the composite fabrication process, will be further in-creased when the composite were subjected to the e

Efeitos da associação da ovariectomia com uma dieta hiperlipídica sobre alterações no metabolismo lipídico, remodelamento e redistribuição do tecido adiposo e sobre os marcadores inflamatórios em camundongas C57BL/6

A menopausa está associada a algumas alterações metabólicas como a obesidade, dislipidemia e inflamação, entre outras anomalias presentes na síndrome metabólica humana. Uma dieta hiperlipídica ou high-fat (HF) associada à menopausa piora tais alterações, aumentando ainda mais o risco de doença cardiovascular. A hipótese de que uma dieta HF agrava as complicações relacionadas à ovariectomia foi testada. Foram avaliadas fêmeas C57BL/6 ovariectomizadas (OVX) ou com operação SHAM e alimentados com ração padrão ou Standard Chow (SC, 10% de gordura) ou uma dieta HF (60% de gordura) por 18 semanas. A eficiência alimentar (EA), massa corporal (MC), distribuição regional das massas de gordura e a morfometria dos adipócitos foram estudados. As análises de sangue (colesterol total, CT, triglicerídeos, TG, citocinas e adipocinas) foram realizadas. Camundongas OVX-HF apresentaram maior EA e maior MC do que os demais grupos (P<0,05). A gordura visceral (ovariana e retroperitoneal) e a gordura subcutânea (gordura inguinal) tiveram o mesmo padrão de distribuição entre os grupos SHAM-SC, SHAM-HF e OVX-SC, mas o grupo OVX-HF apresentou um padrão diferente de acúmulo de gordura - muito maior do que no rupo SHAM-SC. A associação da ovariectomia com a dieta HF aumentou significativamente o diâmetro dos adipócitos dos animais OVX-HF em comparação aos SHAM-HF (P<0,0001) e também agravou a elevação dos níveis de CT, TG e de leptina nas camundongas OVX-HF, em relação aos OVX-SC (P<0,0001). Os níveis de adiponectina foram maiores nas camundongas OVX-SC comparados com as das camundongas SHAM-SC e OVX-HF (P<0,001). A associação da ovariectomia com a dieta HF agravou o aumento dos níveis séricos de leptina em camundongas OVX-HF, em relação aos OVX-SC (P<0,005). TNF-alfa não foi diferente entre os grupos, mas a IL-6 foi significativamente maior nas camundongas OVX-HF comparados a ambos os grupos SHAM-HF e OVX-SC (P<0,0001). Concluindo, a ingestão de uma dieta hiperlipídica por camundongas ovariectomizadas, leva ao aumento do acúmulo e redistribuição inadequada de gordura, à piora dos níveis de citocinas e adipocinas, assim como à desordem metabólica, o que aumenta os fatores de risco para doenças cardiovasculares.

Agonistas PPAR (Rosiglitazona, Bezafibrato e Fenofibrato) e alterações bioquímicas e estruturais em órgãos-alvo de camundongos C57BL/6 alimentados com dieta hiperlipídica rica em sacarose

Este trabalho teve o objetivo de estudar o efeito de medicamentos com diferentes ações agonista PPAR (rosiglitazona, fenofibrato e bezafibrato) sobre o perfil lipídico, glicídico e alterações na massa corporal e morfologia do tecido adiposo e pancreático em modelo de diabetes e sobrepeso induzido por dieta. Camundongos C57BL/6 (2 meses de idade) foram alimentados com dieta padrão (SC, n=10) ou dieta hiperlipídica rica em sacarose (HFHS, n=40) por 6 semanas. Logo após, os animais HFHS foram subdividos em: HFHS não tratado e HFHS tratado com rosiglitazona (HFHS-Ro), fenofibrato (HFHS-Fe) ou bezafibrato (HFHS-Bz) (5 semanas). Os camundongos alimentados com dieta HFHS apresentaram maior glicemia e insulina de jejum (+33% e +138%, respectivamente), intolerância à glicose, resistência à insulina, aumento da massa corporal (MC) (+20%) e adiposidade, hipertrofia de adipócitos e redução da imunocoloração para adiponectina no tecido adiposo. No pâncreas houve aumento da massa (+28%), acúmulo de gordura (+700%), hipertrofia da ilhota (+38%) e redução da imunocoloração para GLUT-2 (-60%). A rosiglitazona diminuiu a glicemia e insulina de jejum, porém induziu o ganho de MC e hipertrofia cardíaca. O fenofibrato estabilizou a MC, enquanto o bezafibrato levou a perda de MC. Apenas o bezafibrato impediu a hipertrofia da ilhota. A imunocoloração para GLUT-2 foi aumentada por todos os medicamentos, e não houve alterações na imunocoloração para o PPARα. Sinais morfológicos de pancreatite foram vistos no grupo HFHS-Fe, apesar dos níveis normais de amilase e lipase séricos. A rosiglitazona exacerbou a infiltração intrapancreática de gordura (+75% vs. HFHS), e o bezafibrato aumento a imunocoloração para o PPARβ/δ nas ilhotas pancreáticas. Em conclusão, o bezafibrato apresentou um efeito mais amplo sobre as alterações metabólicas, morfológicas e biométricas decorrentes da dieta HFHS, sugerindo que a inibição das três isoformas do PPAR seria melhor do que a inibição de apenas uma isoforma. A rosiglitazona exacerbou o ganho de MC, a infiltração de gordura no pâncreas e induziu hipertrofia cardíaca, assim, é necessário cautela ao prescrever este medicamento a um paciente obeso.

Efeitos benéficos do tratamento com óleo de peixe em camundongos c57bl/6 alimentados com dieta hiperlipídica e rica em sacarose

Avaliar os efeitos benéficos do tratamento com óleo de peixe sobre mudanças metabólicas e morfológicas no pâncreas e tecido adiposo de camundongos C57BL/6 alimentados com dieta rica em lipídeos e sacarose (HLS).Camundongos machos da linhagem C57BL/6, foram alimentados com dieta padrão (P) ou dieta HLS. Aos 3 meses de idade, os camundongos do grupo HLS foram separados em grupo não-tratado (HLS) ou grupo tratado com óleo de peixe (HLS-Px, 1,5g/kg/dia). Aos 4 meses de idade os animais foram sacrificados. O grupo HLS apresentou aumento da massa corporal (MC) e no acúmulo do tecido adiposo total, porém o grupo HLS-Px apresentou menor MC e massa de tecido adiposo comparado ao grupo HLS. As concentrações de glicose plasmática e insulina não foram afetadas entre os grupos, no entanto os grupos HLS e HLS-Px apresentaram maior HOMA-IR. Os grupos HLS e HLS-Px apresentaram maiores concentrações plasmáticas do colesterol total e LDL-C, porém o grupo HLS-Px apresentou maior concentração plasmática do HDL-C e redução da concentração de triglicerídeos. Os adipócitos do grupo HLS apresentaram maior diâmetro quando comparado aos grupos controle e HLS-Px. A massa do pâncreas foi menor no grupo HLS-Px e as ilhotas pancreáticas apresentaram maior diâmetro no grupo HLS, quando comparado ao grupo controle. A expressão de insulina, glucagon e GLUT-2 mostrou-se forte em todas as ilhotas pancreáticas do grupo controle, mas o grupo HLS apresentou fraca expressão para o GLUT-2. Entretanto, HLS-Px apresentou maior expressão do GLUT-2. O tratamento com óleo de peixe foi capaz de reduzir o ganho de massa corporal e a concentração de triglicerídeos, assim como reduzir o acúmulo de tecido adiposo,hipertrofia dos adipócitos, das ilhotas pancreáticas, assim como prevenir a redução do GLUT-2 em camundongos C57BL/6.

Motion simulation of annular polishing

Based on the Coulomb friction model, the frictional motion model of workpiece relating to the polishing pad was presented in annular polishing. By the dynamic analysis software, the model was simulated and analysed. The conclusions from the results were that the workpiece did not rotate steadily. When the angular velocity of ring and the direction were the same as that of the polishing pad, the angular velocity of workpiece hoicked at the beginning and at the later stage were the same as that of the polishing pad before contacting with the ring. The angular velocity of workpiece vibrated at the moment of contacting with the ring. After that the angular velocity of workpiece increased gradually and fluctuated at a given value, while the angular velocity of ring decreased gradually and also fluctuated at a given value. Since the contact between the workpiece and the ring was linear, their linear velocities and directions should be the same. But the angular velocity of workpiece was larger than that of the polishing pad on the condition that the radius of the workpiece was less than that of the ring. This did not agree with the pure translation principle and the workpiece surface could not be flat, either. Consequently, it needed to be controlled with the angular velocity of ring and the radii of the ring and the workpiece, besides friction to make the angular velocity of workpiece equal to that of the polishing pad for obtaining fine surface flatness of the workpiece. Copyright © 2007 Inderscience Enterprises Ltd.}

环形抛光中工件形状对抛光速度的影响

本文基于库仑摩擦模型，模拟了不同形状的工件在环形抛光的运动。从结果可知，（1）如果工作环处于自由转动状态，工件的角速度在环形抛光中比抛光盘的角速度大；（2）可通过控制工作环的角速度使工件和抛光盘的角速度同步。工作环的角速度依赖于工作环和工件的半径、抛光盘－工件和抛光盘－工作环的摩擦系数，以及抛光盘的角速度；（3）有尖角的工件与工作环的接触处于不连续状态，导致二者的接触状态发生变化和工件角速度的波动。