Normalized wall index specific and MRI-based stress analysis of atherosclerotic carotid plaques: A study comparing acutely symptomatic and asymptomatic patients

Background: Biomechanical stresses play an important role in determining plaque stability. Quantification of these simulated stresses can be potentially used to assess plaque vulnerability and differentiate different patient groups. Methods and Results: 54 asymptomatic and 45 acutely symptomatic patients underwent in vivo multicontrast magnetic resonance imaging (MRI) of the carotid arteries. Plaque geometry used for finite element analysis was derived from in vivo MRI at the sites of maximum and minimum plaque burden. In total, 198 slices were used for the computational simulations. A pre-shrink technique was used to refine the simulation. Maximum principle stress at the vulnerable plaque sites (ie, critical stress) was extracted for the selected slices and a comparison was performed between the 2 groups. Critical stress in the slice with maximum plaque burden is significantly higher in acutely symptomatic patients as compared to asymptomatic patients (median, inter quartile range: 198.0 kPa (119.8-359.0 kPa) vs 138.4 kPa (83.8-242.6 kPa), P=0.04). No significant difference was found in the slice with minimum plaque burden between the 2 groups (196.7 kPa (133.3-282.7 kPa) vs 182.4 kPa (117.2-310.6 kPa), P=0.82). Conclusions: Acutely symptomatic carotid plaques have significantly high biomechanical stresses than asymptomatic plaques. This might be potentially useful for establishing a biomechanical risk stratification criteria based on plaque burden in future studies.

Computed wall stress may predict the growth of abdominal aortic aneurysm

Growth rate of abdominal aortic aneurysm (AAA) is thought to be an important indicator of the potential risk of rupture. Wall stress is also thought to be a trigger for its rupture. However, stress change during the expansion of an AAA is unclear. Forty-four patients with AAAs were included in this longitudinal follow-up study. They were assessed by serial abdominal ultrasonography and computerized tomography (CT) scans if a critical size was reached or a rapid expansion occurred. Patient-specific 3-dimensional AAA geometries were reconstructed from the follow-up CT images. Structural analysis was performed to calculate the wall stresses of the AAA models at both baseline and final visit. A non-linear large-strain finite element method was used to compute the wall stress distribution. The average growth rate was 0.66cm/year (range 0-1.32 cm/year). A significantly positive correlation between shoulder tress at baseline and growth rate was found (r=0.342; p=0.02). A higher shoulder stress is associated with a rapidly expanding AAA. Therefore, it may be useful for estimating the growth expansion of AAAs and further risk stratification of patients with AAAs.

Impact of calcification and intraluminal thrombus on the computed wall stresses of abdominal aortic aneurysm

Background: Increased biomechanical stresses within the abdominal aortic aneurysm (AAA) wall contribute to its rupture. Calcification and intraluminal thrombus can be commonly found in AAAs, but the relationship between calcification/intraluminal thrombus and AAA wall stress is not completely described. Methods: Patient-specific three-dimensional AAA geometries were reconstructed from computed tomographic images of 20 patients. Structural analysis was performed to calculate the wall stresses of the 20 AAA models and their altered models when calcification or intraluminal thrombus was not considered. A nonlinear large-strain finite element method was used to compute the wall stress distribution. The relationships between wall stresses and volumes of calcification and intraluminal thrombus were sought. Results: Maximum stress was not correlated with the percentage of calcification, and was negatively correlated with the percentage of intraluminal thrombus (r = -0.56; P = .011). Exclusion of calcification from analysis led to a significant decrease in maximum stress by a median of 14% (range, 2%-27%; P < .01). When intraluminal thrombus was eliminated, maximum stress increased significantly by a median of 24% (range, 5%-43%; P < .01). Conclusion: The presence of calcification increases AAA peak wall stress, suggesting that calcification decrease the biomechanical stability of AAA. In contrast, intraluminal thrombus reduces the maximum stress in AAA. Calcification and intraluminal thrombus should both be considered in the evaluation of wall stress for risk assessment of AAA rupture.

The impact of wall shear stress and pressure drop on the stability of the atherosclerotic plaque

Rupture of vulnerable atheromatous plaque in the carotid and coronary arteries often leads to stroke and heart attack respectively. The mechanism of blood flow and plaque rupture in stenotic arteries is still not fully understood. A three dimensional rigid wall model was solved under steady state conditions and unsteady conditions by assuming a time-varying inlet velocity profile to investigate the relative importance of axial forces and pressure drops in arteries with asymmetric stenosis. Flow-structure interactions were investigated for the same geometry and the results were compared with those retrieved with the corresponding 2D cross-section structural models. The Navier-Stokes equations were used as the governing equations for the fluid. The tube wall was assumed hyperelastic, homogeneous, isotropic and incompressible. The analysis showed that the three dimensional behavior of velocity, pressure and wall shear stress is in general very different from that predicted by cross-section models. Pressure drop across the stenosis was found to be much higher than shear stress. Therefore, pressure may be the more important mechanical trigger for plaque rupture other than shear stress, although shear stress is closely related to plaque formation and progression.

Natural convection from a vertical cone in a porous medium due to the combined effects of heat and mass diffusion with non-uniform wall temperature/concentration or heat/mass flux and suction/injection

An analysis has been carried out to study the non-Darcy natural convention flow of Newtonian fluids on a vertical cone embedded in a saturated porous medium with power-law variation of the wall temperature/concentration or heat/mass flux and suction/injection with the streamwise distance x. Both non-similar and self-similar solutions have been obtained. The effects of non-Darcy parameter, ratio of the buoyancy forces due to mass and heat diffusion, variation of wall temperature/concentration or heat/mass flux and suction/injection on the Nusselt and Sherwood numbers have been studied.

Three Sides of a Wall : Obstacles and Border States in Paul Auster's Novels

Tutkielmani käsittelee yhdysvaltalaisen kirjailijan Paul Austerin (s. 1947) romaanituotannossa esiintyviä esteitä ja rajatiloja. Erityisesti olen kiinnostunut siitä, miten Auster liittää nämä "marginaalitilat" amerikkalaiseen vapauden ja laajentumisen ideologiaan sekä kieleen ja kirjoittamiseen. Austerin romaaneissa esteiden ja rajatilojen käsittely voidaan jakaa kolmeen vaiheeseen. Ensimmäisessä vaiheessa henkilöt ovat vahvojen esteiden rajoittamia tai rakentavat niitä itse. Rajoittuneisuus ei kuitenkaan aina tunnu häiritsevän heitä - itse asiassa monet päähenkilöistä tuntevat itsensä onnellisiksi tai vähintäänkin tyytyväisiksi joutuessaan esteen takia pysähdyttämään vapaan liikkeensä. Toisessa vaiheessa henkilöt pyrkivät ylittämään tai rikkomaan esteen päästäkseen toiselle puolelle. Kuten amerikkalaiset esi-isänsä aikoinaan, he etsivät rajatonta, laajaa ja tyhjää tilaa - "suurta tuntematonta" valloitettavakseen. Tällaisen tilan kohdatessaan he joutuvat kuitenkin usein epävarmuuden valtaan. Kolmas vaihe on tutkielmani kannalta tärkein: välitila, josta käytän työssäni nimitystä "in-betweenity". Tähän vaiheeseen päästään kulkemalla ensin kahden muun vaiheen kautta. Juuri tietoisuus näistä kahdesta muusta vaiheesta synnyttää tämän kolmannen tilan, eräänlaisen rajatilan, jossa tajutaan sekä esteiden että esteettömyyden tärkeys. Tämä välitila on Austerille tyypillinen tila, joka kertoo paitsi amerikkalaisen unelman paradoksaalisuudesta myös (kaunokirjallisen) kielenkäytön prosessista. Monet Austerin kirjojen muurin rakentajista tai purkajista voidaan nähdä kirjailijahahmoina, joiden omituinen suhde esteisiin ja rajoihin kumpuaa juuri siitä rajatilasta, jonka asukkaita he kielentaiteilijoina väistämättä ovat. Tällaisen tilan/tilattomuuden kuvaaminen tekee Austerista oman postmodernin aikamme tärkeän kirjailijan - kirjailijan, joka sen sijaan, että pyrkisi eroon paradokseista, sijoittaa hahmonsa niiden sisään. Rajoihin ja esteisiin liittyvä problematiikka ei kuitenkaan ole pelkästään nykyajan ongelma vaan kysymys, joka ihmisen toisaalta rajoja kaipaavan toisaalta rajattomuutta kaipaavan luonteen vuoksi säilyy aina ajankohtaisena. Avainsanat: Paul Auster, este, muuri, raja, Yhdysvallat

Fire resistance of light gauge steel frame wall systems lined with gypsum plasterboards

Light gauge steel frame (LSF) wall systems are increasingly used in residential and commercial buildings as load bearing and non-load bearing elements. Conventionally, the fire resistance ratings of such building elements are determined using approximate prescriptive methods based on limited standard fire tests. However, recent studies have shown that in some instances real building fire time-temperature curves could be more severe than the standard fire curve, in terms of maximum temperature and rate of temperature rise. This has caused problems for safe evacuation and rescue activities, and in some instances has also lead to the collapse of buildings earlier than the prescribed fire resistance. Therefore a detailed research study into the performance of LSF wall systems under both standard fire and realistic fire conditions was undertaken using full scale fire tests to understand the fire performance of different LSF wall configurations. Both load bearing and non-load bearing full scale fire tests were performed on LSF walls configurations which included single layer, double layer, externally insulated wall panels made up of different steel sections and thicknesses of gypsum plasterboards. The non-load bearing fire test results were utilized to understand the factors affecting the fire resistance of LSF walls, while loading bearing fire test results led to development of simplified methods to predict the fire resistance ratings of load bearing LSF walls exposed to both standard and realistic design fires. This paper presents the results of full scale experimental study and highlights the effects of standard and realistic fire conditions on fire performance of LSF walls.

Wall Shear Fluctuations in a Turbulent Boundary Layer

IN the last two decades, the instantaneous structure of a turbulent boundary layer has been examined by many in an effort to understand the dynamics of the flow. Distinct and well-defined flow patterns that seem to have great relevance to the turbulence production mechanism have been observed in the wall region.1'2 The flow near the wall is intermittent with periodic eruptions of the fluid, a phenomenon generally termed "bursting process." Earlier investigations in this field were limited to liquid flows at low speeds and the entire flowpattern was observed using flow visualization techniques.Study was later extended to boundary-layer flows in windtunnels at higher speeds and Reynolds numbers using hot-wiresignals for the analysis of the bursting phenomenon.

Martin Buber seated on wall outdoors at breakfast time; Berne Portraits Men

Digital Image

Group portrait at the farewell banquet for Dr. William Antopol from the laboratory staff of Mount Sinai Hospital; Ken's Chop House, New York city Portraits Groups

Digital Image

Portrait of William and Charlotte Engel Levison Portraits Couples

Digital Image

Dr. William Levison working at a desk Portraits Men

Digital Image

Portrait of Dr. William Levison Portraits Men

Digital Image