Reconstructing the architectural evolution of volcanic islands from combined K/AR, morphologic, tectonic, and magnetic data. The Faial Island exemple (Azores)

The morpho-structural evolution of oceanic islands results from competition between volcano growth and partial destruction by mass-wasting processes. We present here a multi-disciplinary study of the successive stages of development of Faial (Azores) during the last 1 Myr. Using high-resolution digital elevation model (DEM), and new K/Ar, tectonic, and magnetic data, we reconstruct the rapidly evolving topography at successive stages, in response to complex interactions between volcanic construction and mass wasting, including the development of a graben. We show that: (1) sub-aerial evolution of the island first involved the rapid growth of a large elongated volcano at ca. 0.85 Ma, followed by its partial destruction over half a million years; (2) beginning about 360 ka a new small edifice grew on the NE of the island, and was subsequently cut by normal faults responsible for initiation of the graben; (3) after an apparent pause of ca. 250 kyr, the large Central Volcano (CV) developed on the western side of the island at ca 120 ka, accumulating a thick pile of lava flows in less than 20 kyr, which were partly channelized within the graben; (4) the period between 120 ka and 40 ka is marked by widespread deformation at the island scale, including westward propagation of faulting and associated erosion of the graben walls, which produced sedimentary deposits; subsequent growth of the CV at 40 ka was then constrained within the graben, with lava flowing onto the sediments up to the eastern shore; (5) the island evolution during the Holocene involves basaltic volcanic activity along the main southern faults and pyroclastic eruptions associated with the formation of a caldera volcano-tectonic depression. We conclude that the whole evolution of Faial Island has been characterized by successive short volcanic pulses probably controlled by brief episodes of regional deformation. Each pulse has been separated by considerable periods of volcanic inactivity during which the Faial graben gradually developed. We propose that the volume loss associated with sudden magma extraction from a shallow reservoir in different episodes triggered incremental downward graben movement, as observed historically, when immediate vertical collapse of up to 2 m was observed along the western segments of the graben at the end of the Capelinhos eruptive crises (1957-58).

Arithmetic-based binary-to-RNS converter modulo {2(n)+/- k} for jn-Bit dynamic range

In this brief, a read-only-memoryless structure for binary-to-residue number system (RNS) conversion modulo {2(n) +/- k} is proposed. This structure is based only on adders and constant multipliers. This brief is motivated by the existing {2(n) +/- k} binary-to-RNS converters, which are particular inefficient for larger values of n. The experimental results obtained for 4n and 8n bits of dynamic range suggest that the proposed conversion structures are able to significantly improve the forward conversion efficiency, with an AT metric improvement above 100%, regarding the related state of the art. Delay improvements of 2.17 times with only 5% area increase can be achieved if a proper selection of the {2(n) +/- k} moduli is performed.

Imagens da Técnica na Ficção Científica. A Obra de Philip K. Dick no Contexto Sociotécnico

Dissertação para obtenção do grau de Doutor em Ciências da Comunicação Especialidade de Comunicação e Cultura

Achieving K/DOQI Targets with Cinacalcet in Dialysis Patients with Secondary Hyperparathyroidism. A Portuguese Observational Study

Secondary hyperparathyroidism is a common complication of chronic kidney disease. The elevated serum intact parathyroid hormone, phosphorus, calcium and calcium x phosphorus product have been independently associated with an increased relative risk of mortality. The standard therapy for secondary hyperparathyroidism, including active vitamin D analogues and phosphate binders, is often insufficient to allow patients to achieve the recommended Kidney Disease Outcomes Quality Initiative targets for bone and mineral metabolism. Randomised controlled phase III clinical studies in chronic kidney disease patients with secondary hyperparathyroidism have shown that cinacalcet treatment increases the proportion of patients achieving the recommended Kidney Disease Outcomes Quality Initiative targets for intact parathyroid hormone, phosphorus, calcium and calcium x phosphorus product. Aims: This observational multicentre study aims to evaluate cinacalcet’s ability to achieve and maintain Kidney Disease Outcomes Quality Initiative targets in a population with secondary hyperparathyroidism on chronic haemodialysis in Portugal. Patients and Methods: Patients on chronic dialysis that received cinacalcet during a free sampling programme were enrolled. Retrospective and prospective monthly data were collected from 3 months before until 6 months after the beginning of cinacalcet treatment. Additional assessment included a 12 month evaluation of all parameters. Results: 140 dialysis patients with secondary hyperparathyroidism were enrolled, 60% male, mean age 57.4±14.1 years. The mean intact parathyroid hormone, calcium, phosphorus, and calcium x phosphorus product values at baseline were 751.7±498.8 pg/ml, 9.7±3.8 mg/dl, 5.5±1.5 mg/dl, and 52.7±25.3 mg2/dl2, respectively. After 6 months’ cinacalcet treatment, 26.2%, 53.6%, 59.3%, and 81.0% of the patients achieved the Kidney Disease Outcomes Quality Initiative recommended levels for intact parathyroid hormone, calcium, phosphorus, and calcium x phosphorus product, respectively. The mean dose of cinacalcet at 6 months was 57.1±29.7 mg/day. Conclusions: The use of cinacalcet in clinical practice is an effective option for the treatment of secondary hyperparathyroidism in chronic dialysis patients, allowing more patients to reach and maintain the Kidney Disease Outcomes Quality Initiative targets.

Ligand K-edge X-ray absorption spectroscopy and DFT calculations on [Fe3S4]0,+ clusters: delocalization, redox, and effect of the protein environment

Ligand K-edge XAS of an [Fe3S4]0 model complex is reported. The pre-edge can be resolved into contributions from the í2Ssulfide, í3Ssulfide, and Sthiolate ligands. The average ligand-metal bond covalencies obtained from these pre-edges are further distributed between Fe3+ and Fe2.5+ components using DFT calculations. The bridging ligand covalency in the [Fe2S2]+ subsite of the [Fe3S4]0 cluster is found to be significantly lower than its value in a reduced [Fe2S2] cluster (38% vs 61%, respectively). This lowered bridging ligand covalency reduces the superexchange coupling parameter J relative to its value in a reduced [Fe2S2]+ site (-146 cm-1 vs -360 cm-1, respectively). This decrease in J, along with estimates of the double exchange parameter B and vibronic coupling parameter ì2/k-, leads to an S ) 2 delocalized ground state in the [Fe3S4]0 cluster. The S K-edge XAS of the protein ferredoxin II (Fd II) from the D. gigas active site shows a decrease in covalency compared to the model complex, in the same oxidation state, which correlates with the number of H-bonding interactions to specific sulfur ligands present in the active site. The changes in ligand-metal bond covalencies upon redox compared with DFT calculations indicate that the redox reaction involves a two-electron change (one-electron ionization plus a spin change of a second electron) with significant electronic relaxation. The presence of the redox inactive Fe3+ center is found to decrease the barrier of the redox process in the [Fe3S4] cluster due to its strong antiferromagnetic coupling with the redox active Fe2S2 subsite.

Estudo da Variação de Kₒ com OCR em Areias

Dissertação para obtenção do Grau de Mestre em Engenharia Civil (Perfil de Estruturas e Geotecnia)

Formation of a stable cyano-bridged dinuclear iron cluster following oxidation of the superoxide reductases from Treponema pallidum and Desulfovibrio vulgaris with K(3)Fe(CN)(6)

Inorg. Chem., 2003, 42 (4), pp 938–940 DOI: 10.1021/ic0262886

Ineficácia do K-7505 (Ronnel) no tratamento da esquistossomíase mansônica

Quatro pacientes portadores de esquistossomose mansoni (três com a forma hepato-intestinal e um com a forma hepato-esplénica compensada) foram tratados com a substância K - 7505 ou Ronnel - 0,0 - dimetil - 0 - (2, 4, 5 - triclorofenil) - fosforotioato, avaliando-se o resultado do ensaio pela biopsia da mucosa retal (oograma) e o exame parasitológico das fezes pelo método de Hoffmann, Pons e Janer, quatorze dias após o término do tratamento. Conclui o autor que nas doses usadas o medicamento em aprêço é destituído de atividade esquistossomicida.

Cost-Effectiveness of Non-Vitamin K Antagonist Oral Anticoagulants for Atrial Fibrillation in Portugal

INTRODUCTION AND OBJECTIVES:Recently, three novel non-vitamin K antagonist oral anticoagulants received approval for reimbursement in Portugal for patients with non-valvular atrial fibrillation (AF). It is therefore important to evaluate the relative cost-effectiveness of these new oral anticoagulants in Portuguese AF patients. METHODS: A Markov model was used to analyze disease progression over a lifetime horizon. Relative efficacy data for stroke (ischemic and hemorrhagic), bleeding (intracranial, other major bleeding and clinically relevant non-major bleeding), myocardial infarction and treatment discontinuation were obtained by pairwise indirect comparisons between apixaban, dabigatran and rivaroxaban using warfarin as a common comparator. Data on resource use were obtained from the database of diagnosis-related groups and an expert panel. Model outputs included life years gained, quality-adjusted life years (QALYs), direct healthcare costs and incremental cost-effectiveness ratios (ICERs). RESULTS:Apixaban provided the most life years gained and QALYs. The ICERs of apixaban compared to warfarin and dabigatran were €5529/QALY and €9163/QALY, respectively. Apixaban was dominant over rivaroxaban (greater health gains and lower costs). The results were robust over a wide range of inputs in sensitivity analyses. Apixaban had a 70% probability of being cost-effective (at a threshold of €20 000/QALY) compared to all the other therapeutic options. CONCLUSIONS:Apixaban is a cost-effective alternative to warfarin and dabigatran and is dominant over rivaroxaban in AF patients from the perspective of the Portuguese national healthcare system. These conclusions are based on indirect comparisons, but despite this limitation, the information is useful for healthcare decision-makers.

Avaliação da eficiência de deltametrina (K-Othrine 50fw), em doses baixas, no controle de triatomíneos em São Sebastião do Umbuzeiro, Paraíba

Testamos a deltametrina (K-Othrine 50FW) no controle de triatomíneos em área de semi-árido, com cerca de 56,6% depositividade inicial no intradomicilio. Usamos, em 402 Unidades Domiciliares, 125, 75, 60 ou 50ml por bomba de 10 litros, equivalendo, se aplicados em 250 m², a 25, 15, 12 ou 10 mg/m². Os índices de invasão, colonização e cumulativo no intradomicilio e de positividade no peridomicílio foram muito baixos e similares nos quatro grupos, nos 15 meses de avaliação, indicando poderem as doses menores substituir a de 25 mg/m². Houve predominância de T. infestans, seguido de T. pseudomaculata, nas casas, e este predominou no peridomicílio, após a pulverização.

Avaliação da eficiência de deltametrina (K-othrine CE) no controle de Lutzomyia longipalpis (Diptera: Psychodidae), no município de Santa Rita, Paraíba, Brasil

Deltametrina em concentrado emulsionável foi aplicada em doses de 12,5, 25,0 e 50,0mg/m², em domicílios de área próxima do litoral da Paraíba, onde eram relatados casos esporádicos de leishmaniose visceral. Houve uma redução marcante nas populações de vários artrópodes, incluindo Lutzotnyia longipalpis. Este inseto, no entanto, foi encontrado novamente em contato com paredes tratadas, 14 e 21 dias após a pulverização. A análise estatística indicou controle significativo em apenas dois períodos de quatro semanas, com extrema irregularidade nas quantidades capturadas.

40 K Liquid Neon Energy Storage Unit

A thermal Energy Storage Unit (ESU) could be used to attenuate inherent temperature fluctuations of a cold finger, either from a cryocooler working or due to sudden income heat bursts. An ESU directly coupled to the cold source acts as a thermal buffer temporarily increasing its cooling capacity and providing a better thermal stability of the cold finger (“Power Booster mode”). The energy storage units presented here use an enthalpy reservoir based on the high latent heat of the liquid-vapour transition of neon in the temperature range 38 - 44 K to store up to 900 J, and that uses a 6 liters expansion volume at RT in order to work as a closed system. Experimental results in the power booster mode will be described: in this case, the liquid neon cell was directly coupled to the cold finger of the working cryocooler, its volume (12 cm3) allowing it to store 450 J at around 40 K. 10 W heat bursts were applied, leading to liquid evaporation, with quite reduced temperature changes. The liquid neon reservoir can also work as a temporary cold source to be used after stopping the cryocooler, allowing for a vibration-free environment. In this case the enthalpy reservoir implemented (24 cm3) was linked to the cryocooler cold finger through a gas gap heat switch for thermal coupling/decoupling of the cold finger. We will show that, by controlling the enthalpy reservoir’s pressure, 900 J can be stored at a constant temperature of 40 K as in a triple-point ESU.

40 K Neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices, implemented as a software,describes quite well the experimental results. Solutions to improve these devices are also proposed.

40 K neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices,implemented as a software, describes quite well the experimental results. Solutions to improve these devices are also proposed.

Toyota RAV4 model year marketing plan for the U.K

NSBE - UNL