Araucaria clonal forestry: types of cuttings and mother tree sex in field survival and growth.

Araucaria angustifolia é uma espécie nativa potencial para a silvicultura brasileira. No entanto, uma série de desafios e limitações técnicas ainda persistem, dificultando sua expansão silvicultural, dentre os quais se destaca a falta de tecnologias de clonagem de materiais genéticos superiores, bem como sua avaliação em condições de campo. Assim, objetivou-se avaliar a potencialidade da utilização de mudas de araucária oriundas de estaquia e de sementes para produção madeireira, por meio da avaliação da sobrevivência e crescimento a campo. Clones provenientes de matrizes masculinas e femininas, de diferentes tipos de estacas e mudas de sementes foram plantadas em espaçamento 3 x 3 m. O experimento foi conduzido em delineamento inteiramente casualizado, com três tratamentos e parcelas de uma planta (one tree plot). Clones do sexo feminino e de estacas contendo o ápice apresentaram maior crescimento em diâmetro à altura do peito (6,4 cm) e altura total (3,6 m) aos 74 meses após o plantio, seguidas das de sementes e demais clones, com resultados similares. Conclui-se que a estaquia é uma técnica potencial de produção de mudas de araucária para fins madeireiros e é favorecida pela utilização de estacas proveniente de matrizes femininas e com ápice.

Juniperus navicularis - a study of Portuguese population structure and fitness

Juniperus navicularis Gand. is a dioecious endemic conifer that constitutes the understory of seaside pine forests in Portugal, areas currently threatened by increasing urban expansion. The aim of this study is to assess the conservation status of previously known populations of this species located on its core area of distribution. The study was performed in south-west coast of Portugal. Three populations varying in size and pine density were analyzed. Number of individuals, population density, spatial distribution and individual characteristics of junipers were estimated. Female cone, seed characteristics and seed viability were also evaluated. Results suggest that J. navicularis populations are vulnerable because seminal recruitment is scarce, what may lead to a reduction of genetic variability due solely to vegetative propagation. This vulnerability seems to be strongly determined by climatic constraints toward increasing aridity. Ratio between male and female shrubs did not differ from 1:1 in any population. Deviations from 1:1 between mature and non-mature plants were found in all populations, denoting population ageing. Very low seed viability was observed. A major part of described Juniperus navicularis populations have disappeared through direct habitat loss to urban development, loss of fitness in drier and warmer locations and low seed viability. This study is the first to address J. navicularis conservation, and represents a valuable first step toward this species preservation.

Simplificação do processo de multiplicação in vitro da oliveira "Olea europaea L."

A oliveira tem sido multiplicada ao longo dos tempos por métodos convencionais de propagação vegetativa como a enxertia e a estacaria lenhosa e semilenhosa. No entanto, estes métodos revelam-se lentos ou ineficientes para determinadas cultivares. No caso da cv. ‘Galega Vulgar’, ainda com grande expressão no olival português, e de difícil enraizamento por estacaria semilenhosa, tem sido usada a micropropagação de modo a contornar essas limitações e assim obter um elevado número de plantas em curto período de tempo. O custo final de produção por este processo ainda é elevado, podendo comprometer a sua aplicação a nível comercial. Grande parte dos custos estão relacionados com a fase de enraizamento in vitro que carece de ambiente estéril e condições de assépsia para a sua execução. Com vista a uma redução de custos associados a esta fase de produção, pretendeu-se com este trabalho testar a viabilidade do enraizamento ex vitro, na ausência de condições de assépsia. Este método poderá permitir uma significativa redução da mão-de-obra, ao mesmo tempo que facilitará a aclimatização das plantas e a obtenção de um sistema radicular de melhor qualidade. Compararam-se as taxas de enraizamento in vitro (controlo), com as obtidas ex vitro. Foram utilizados explantes provenientes de dois clones da cv. ‘Galega Vulgar’, (cl. 1441 e cl. 2022) cultivados e mantidos in vitro há vários anos no Laboratório de Melhoramento e Biotecnologia da Universidade de Évora. Para além do clone foi avaliada a influência do tipo de estaca (basal e apical), da hormona de enraizamento (AIB e ANA), da sua concentração (540 e 3000 ppm) e ainda de dois substratos, Preformas Jiffy® e pastilhas de fibra coco. Os melhores resultados foram obtidos com o clone 1441 em pastilhas de fibra de coco prensada, com o uso de estacas basais. Quanto à auxina, não se observaram diferenças significativas entre a utilização de ANA na concentração de 540 ppm e AIB na concentração de 3000 ppm. A aclimatização das plantas foi conseguida com taxas elevadas de sucesso, independentemente do tratamento utilizado. Conclui-se que a aplicação do método de enraizamento ex vitro simplifica procedimentos e mantém taxas de enraizamento elevadas, conduzindo assim a uma efetiva redução de tempo e custos associados; Simplifying procedures for in vitro propagation of olive “Olea europaea L.” Abstract: The olive tree has been multiplied throughout the ages by conventional methods of vegetative propagation such as grafting and wood or softwood cuttings. These propagation methods are somehow inefficient for certain cultivars. For the CV. ‘Galega Vulgar‘, still with great expression in Portuguese olive orchards, propagation has been attempted by in vitro culture in order to circumvent these limitations and so obtain a large number of plants in short time period. The final production fees associated to this process are still high which may compromise its application to a commercial level. Most of this process fees are related to the in vitro rooting phase which lacks sterile and aseptic conditions for its implementation. Aiming to reduce the costs associated with this production phase, this work tested the feasibility of the ex vitro rooting in the absence of aseptic conditions, which can allow a significant reduction of the manpower involved and an easier plant acclimatization due to its transplant with a balled-root system. In vitro rooting rates (control) were compared with those obtained with the ex vitro experiments. Explants from two clones of the cv. ‘Galega Vulgar‘ (cl. 1441 and cl. 2022), grown and maintained in vitro for several years in the Laboratory of Biotechnology and Plant Breeding of the University of Évora, were used in the trials. In addition to the clone, the effect of the cutting type (basal and apical), the rooting hormone (AIB and ANA), their concentration (540 and 3000 ppm) and two substrates, Preformas Jiffy ® and pressed coco fiber pellets, were also evaluated. The best results were obtained with the clone 1441, when rooted in pressed coco fiber pellets, using basal cuttings. Under this conditions no significant differences were observed between the use of ANA at 540 ppm or AIB in the 3000 ppm. Acclimatization of plants was achieved with high rates of success, regardless of the treatment used. It can be concluded that the application of the ex vitro rooting method allows to maintain high rooting rates, contributing for an effective reduction of time and fees of the rooting process.

Tank cultivation of the red alga Palmaria palmata: Year-round induction of tetrasporangia, tetraspore release in darkness and mass cultivation of vegetative thalli

Field-collected tetrasporophytes of Palmaria palmata were tumbled in 300-L outdoor tanks from January to August at ambient daylength or in a constant short-day (SD) regime (8 h light per day), both at 10 or 15 degrees C. Tetrasporangia were massively induced after 2.5 months under SD conditions at 10 degrees C and completely lacking at 15 degrees C, both under SD or ambient daylength conditions, with a few tetrasporangia present at 10 degrees C and ambient daylength. Elongation rates of tagged tetrasporophytic thalli peaked from March to April in all four conditions, when the biomass densities in the outdoor tanks were close to 2.5 kg fresh weight m(-2). Under all four conditions, juvenile proliferations started to appear in June from the margins of the old fronds, and attained approximately 1 cm in length by the end of July. Approximately 80% of the tetraspores were released during the first three dark phases in a light/dark regime, and the remaining 20% during the light phases. A minimum of 10 min darkness was observed to trigger spore release. White light inhibited tetraspore release, while a similar number of spores were released in continuous red light or in the light/dark regime, although with no significant differences of spore release during subjective days and nights. Sporelings were successfully derived from the released tetraspores for mass propagation of the male gametophyte in 2000-L outdoor tanks in a greenhouse. Mass production of male gametophytic sporelings of P. palmata was completed two times by SD induction of tetrasporangia at 10 degrees C, release of spores in darkness and culturing the sporelings until they were ready to be propagated vegetatively in greenhouse tanks. One experiment lasted from January to October 2001, with spore release in June, and the second from September to April 2003, with spore release in January. These results may support the development of sustainable, year-round Palmaria farming. (c) 2005 Elsevier B.V. All rights reserved.

Propagation of Camptosema grandiflorum native to Brazil by seeds and cuttings

Camptosema grandiflorum Benth., belonging to Fabaceae, is a voluble climber plant native to Brazil. Plants bloom in autumn-winter, producing long and hanging inflorescences with showy red flowers, which are much visited by hummingbirds. The leaves are also attractive, composed by three leaflets. It can be propagated by seeds or cuttings, but both seed germination and cutting rooting percentages are very low. Thus, the objective of this work was to study the effect of different temperatures on seed germination and of different indolebutyric acid (IBA) concentrations on the rooting of cuttings of C. grandiflorum. The experiment was set up at the São Paulo State University, located in Jaboticabal, São Paulo State, Brazil. The germination study was conducted in an entirely randomized design with six different temperatures (constant at 20, 25, 30 and 35°C; and alternated at 20-30 and 25-35°C, with a photoperiod of 12 hours) and four replications of 25 seeds each, placed in plastic boxes with vermiculite. The percentage of germination and the speed germination index (SGI) were evaluated. An entirely randomized block design was adopted for the cutting rooting evaluation, with four IBA concentrations (0; 1,000; 2,000; and 3,000 mg kg-1) and five replications of ten cuttings each, comprising 200 cuttings. After 30 days from the beginning of the rooting experiment, data referring to rooting percentage, number and length of roots and dry weight of roots were collected. For the seed germination experiment, fastest germination and highest germination percentage (87%) were obtained when seeds were maintained under the constant temperature of 30°C. For the cutting experiment, the concentrations of 2,000 and 3,000 mg kg-1 of IBA promoted the highest rooting percentages (98.5 and 94.1%, respectively) and number of roots. There were no statistical differences among the IBA concentrations for length of roots and dry weight of roots.

Predication and propagation : a method for analyzing evaluative meanings in technology policy

In this article I outline and demonstrate a synthesis of the methods developed by Lemke (1998) and Martin (2000) for analyzing evaluations in English. I demonstrate the synthesis using examples from a 1.3-million-word technology policy corpus drawn from institutions at the local, state, national, and supranational levels. Lemke's (1998) critical model is organized around the broad 'evaluative dimensions' that are deployed to evaluate propositions and proposals in English. Martin's (2000) model is organized with a more overtly systemic-functional orientation around the concept of 'encoded feeling'. In applying both these models at different times, whilst recognizing their individual usefulness and complementarity, I found specific limitations that led me to work towards a synthesis of the two approaches. I also argue for the need to consider genre, media, and institutional aspects more explicitly when claiming intertextual and heteroglossic relations as the basis for inferred evaluations. A basic assertion made in this article is that the perceived Desirability of a process, person, circumstance, or thing is identical to its 'value'. But the Desirability of anything is a socially and thus historically conditioned attribution that requires significant amounts of institutional inculcation of other 'types' of value-appropriateness, importance, beauty, power, and so on. I therefore propose a method informed by critical discourse analysis (CDA) that sees evaluation as happening on at least four interdependent levels of abstraction.

Damage propagation in reinforced concrete frames under external blast loading

Iconic and significant buildings are the common target of bombings by terrorists causing large numbers of casualties and extensive property damage. Recent incidents were external bomb attacks on multi-storey buildings with reinforced concrete frames. Under a blast load circumstance, crucial damage initiates at low level storeys in a building and may then lead to a progressive collapse of whole or part of the structure. It is therefore important to identify the critical initial influence regions along the height, width and depth of the building exposed to blast effects and the structure response in order to assess the vulnerability of the structure to disproportionate and progressive collapse. This paper discusses the blast response and the propagation of its effects on a two dimensional reinforced concrete (RC) frame, designed to withstand normal gravity loads. The explicit finite element code, LS DYNA is used for the analysis. A complete RC portal frame seven storeys by six bays is modelled with reinforcement details and appropriate materials to simulate strain rate effects. Explosion loads derived from standard manuals are applied as idealized triangular pressures on the column faces of the numerical models. The analysis reports the influence of blast propagation as displacements and material yielding of the structural elements in the RC frame. The effected regions are identified and classified according to the load cases. This information can be used to determine the vulnerability of multi-storey RC buildings to various external explosion scenarios and designing buildings to resist blast loads.

Predication, propagation, and mediation SFL, CDA, and the inculcation of evaluative meaning systems

In this chapter I propose a theoretical framework for understanding the role of mediation processes in the inculcation, maintenance, and change of evaluative meaning systems, or axiologies, and how such a perspective can provide a useful and complementary dimension to analysis for SFL and CDA. I argue that an understanding of mediation—the movement of meaning across time and space—is essential for the analysis of meaning. Using two related texts as examples, I show how an understanding of mediation can aid SFL and CDA practitioners in the analysis of social change.

Predictions of angle dependent tortuosity and elasticity effects on sound propagation in cancellous bone

The anisotropic pore structure and elasticity of cancellous bone cause wave speeds and attenuation in cancellous bone to vary with angle. Previously published predictions of the variation in wave speed with angle are reviewed. Predictions that allow tortuosity to be angle dependent but assume isotropic elasticity compare well with available data on wave speeds at large angles but less well for small angles near the normal to the trabeculae. Claims for predictions that only include angle-dependence in elasticity are found to be misleading. Audio-frequency data obtained at audio-frequencies in air-filled bone replicas are used to derive an empirical expression for the angle-and porosity-dependence of tortuosity. Predictions that allow for either angle dependent tortuosity or angle dependent elasticity or both are compared with existing data for all angles and porosities.