Different methods of cutting fluid application on turning of a difficult-to-machine steel

Different methods of cutting fluid application are used on turning of a difficult-tomachine steel (SAE EV-8). A semi-synthetic cutting fluid was applied using a conventional method, minimum quantity of cutting fluid (MQCF), and pulverization. By the minimum quantity method was also applied a lubricant of vegetable oil (MQL). Thereafter, a cutting fluid jet under high pressure (3.0 MPa) was singly applied in the following regions: chip-tool interface; top surface of the chip; and tool-workpiece contact. Two other methods were used: an interflow between conventional application and chip-tool interface jet and, finally, three jets simultaneously applied. In order to carry out these tests, it was necessary to set up a high pressure system using a piston pump for generating a cutting fluid jet, a Venturi for fluid application (MQCF and MQL), and a nozzle for cutting fluid pulverization. The output variables analyzed included tool life, surface roughness, cutting tool temperature, cutting force, chip form, chip compression rate and machined specimen microstructure. It can be observed that the tool life increases and the cutting force decreases with the application of cutting fluid jet, mainly when it is directed to the chip-tool interface. Excluding the methods involving jet fluid, the conventional method seems to be more efficient than other methods of low pressure. © (2013) Trans Tech Publications, Switzerland.

Bioactive substance contents and antioxidant capacity of the lipid fraction of Annona crassiflora Mart. seeds

Annona crassiflora Mart. is a typical fruit of the Brazilian cerrado, considered to be a species of economic interest, mainly for its use in cooking, which is widespread among the inhabitants of that region, and can be found in many typical local dishes, especially sweets, jellies, liqueurs, soft drinks, ice creams and juices. Thus, the objective of this study was to determine the bioactive substance contents and the antioxidant capacity of the lipid fraction of A. crassiflora Mart. seeds in the interest of better identifying the quality of this raw material from the Brazilian cerrado. After the receipt of the fruits, the seeds were removed manually and, then, the lipid fraction was obtained by cold extraction with chloroform:methanol:water (2:1:0.8, v/v/v) and analyzed for the composition of phytosterols, tocopherols, fatty acids, total carotenoids, antioxidant activity and oxidative stability index. The lipid fraction showed significant quantity of bioactive substances, especially phytosterols, tocopherols and unsaturated fatty acids, as well as significant antioxidant capacity and oxidative stability, influenced by the content of phytosterols and the composition of fatty acids present in the analyzed fraction. © 2012 Elsevier B.V.

Spray Nozzles, Pressures, Additives and Stirring Time on Viability and Pathogenicity of Entomopathogenic Nematodes (Nematoda: Rhabditida) for Greenhouses

The objective of this study was to evaluate different strategies for the application of entomopathogenic nematodes (EPN). Three different models of spray nozzles with air induction (AI 11003, TTI 11003 and AD-IA 11004), three spray pressures (207, 413 and 720 kPa), four different additives for tank mixtures (cane molasses, mineral oil, vegetable oil and glycerin) and the influence of tank mixture stirring time were all evaluated for their effect on EPN (Steinernema feltiae) viability and pathogenicity. The different nozzles, at pressures of up to 620 kPa, were found to be compatible with S. feltiae. Vegetable oil, mineral oil and molasses were found to be compatible adjuvants for S. feltiae, and stirring in a motorized backpack sprayer for 30 minutes did not impact the viability or pathogenicity of this nematode. Appropriate techniques for the application of nematodes with backpack sprayers are discussed. © 2013 Moreira et al.

Physicochemical and bioactive properties of Hymenaea courbaril L. pulp and seed lipid fraction

This study aimed to assess the nutritional composition of the fruit and the physicochemical and bioactive properties of jatoba (Hymenaea courbaril L.) pulp and seed oils. The lipid content of both fractions was below 6%. There was a significant presence of minerals, especially, sodium, potassium and phosphorus. The main macronutrient in pulp and seed was crude fiber, and considerable amounts of Vitamin C, 51.87 and 121.45. mg/100. g respectively, were found. The physicochemical properties demonstrated the good quality of the oils. The oxidative stability index was influenced by the composition of fatty acids reaching a value of 45.97. h for the jatoba pulp oil. The most abundant bioactive compounds were α-tocopherol (886.37 and 993.63. mg/kg) and β-sitosterol (61.83 and 91.09. mg/kg) for pulp and seed oils, respectively. Among the unsaturated fatty acids in the pulp, the oleic (46.09%) and linolenic acid (14.54%) stood out. The pulp and seed oils can be considered a valuable source for new industrial, cosmetic and pharmaceutical products. © 2013 Elsevier B.V.

Estimativa da área e capacidade de retenção foliar de calda em citros

This work was done to determine the maximum amount of liquid that the citrus leaves can hold back and compare alternative methods for estimating leaf area with the standard method of integrating electronic image. The alternative methods were leaf mirroring on paper and leaf digitalization and imagine analyzes. The spray retention capacity was evaluated with mitecide sprayed with cyhexatin (Sipcatin 500 CS) plus the treatments: combination of two adjuvants (mineral oil - Assist and vegetable oil - Veget'Oil) and two concentrations (10 and 15 mL of adjuvant L-1). The methods for estimating leaf area assessed do not differ between them. The maximum retention of liquids for the leaf occurred when vegetable oil in the application was used.

Ação de óleos essenciais no controle de sigatoka-negra (Mycosphaerella fijiensis) Morelet de bananeiras (Musa sp)

Pós-graduação em Ciências Biológicas (Botânica) - IBB

Biodesel de mamona em trator: desempenho em função do período de armazenamento e da proporção biodiesel/diesel em condição de preparo de solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Impacto da prática da atividade física e do consumo de dieta hiperlipídica em modelo experimental

Pós-graduação em Alimentos e Nutrição - FCFAR

Quantificação do ar incluído e espectro de gotas de pontas de pulverização em aplicações com adjuvantes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo das características de tamanho de gotas de bicos de pulverização de energia centrífuga e hidráulica na cultura do algodoeiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Biodegradação de biodiesel de origem animal

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Biodegradação e avaliação fitotoxicológica do diesel e do biodiesel

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Desempenho e medidas corporais de tourinhos da raça Nelore alimentados com cana-de-açúcar e diferentes fontes de óleo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Atividade do inseticida Spinetoram no controle da traça-do-tomateiro, Tuta absoluta (Meyrick,1917) (Lepidoptera: Gelechiidae), na cultura do tomate

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação da deriva da mistura 2,4-D e glyphosate com diferentes pontas de pulverização e adjuvantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)