Effect of conditioned medium of mesenchymal stem cells on the in vitro maturation and subsequent development of mouse oocyte

Mesenchymal stem cells (MSCs) secrete a variety of cytokines and growth factors in addition to self-renewal and multiple forms of differentiation. Some of these secreted bioactive factors could improve meiotic maturation in vitro and subsequent embryo developmental potential. The aim of the present study was to determine whether in vitro maturation (IVM) of mouse oocyte with or without cumulus cells could be improved by contact with conditioned medium (CM) of MSCs as well as the efficiency of CM to support follicular growth and oocyte maturation in the ovarian organ of mice cultured on soft agar. The developmental potential of matured oocyte was assessed by blastocyst formation after in vitro fertilization (IVF). Germinal vesicle stage oocytes with or without cumulus cells were subjected to IVM in either CM, Dulbecco's modified Eagle's medium (DMEM), α-minimum essential medium (α-MEM) or human tubal fluid (HTF). Approximately 120 oocytes were studied for each medium. CM produced a higher maturation rate (91.2%) than DMEM (54.7%), α-MEM (63.5%) and HTF (27.1%). Moreover, CM improved embryo development to blastocyst stage significantly more than DMEM and HTF (85 vs 7% and 41.7%, respectively) but there was no significant difference compared with α-MEM (85 vs 80.3%). The behavior of cortical granules of IVM oocytes cultured in CM revealed cytoplasmic maturation. Moreover, CM also supported preantral follicles growth well in organotypic culture on soft agar resulting in the maturation of 60% of them to developmentally competent oocytes. The production of estrogen progressively increased approximately 1-fold every other day during organ culture, while a dramatic 10-fold increase in progesterone was observed 17 h after human chorionic gonadotropin stimulus at the end of culture. Thus, CM is an effective medium for preantral follicle growth, oocyte maturation, and sequential embryo development.

Introducing the concept of critical Fo in batch heat processing

The determination of the sterilization value for low acid foods in retorts includes a critical evaluation of the factory's facilities and utilities, validation of the heat processing equipment (by heat distribution assays), and finally heat penetration assays with the product. The intensity of the heat process applied to the food can be expressed by the Fo value (sterilization value, in minutes, at a reference temperature of 121.1 °C, and a thermal index, z, of 10 °C, for Clostridium botulinum spores). For safety reasons, the lowest value for Fo is frequently adopted, being obtained in heat penetration assays as indicative of the minimum process intensity applied. This lowest Fo value should always be higher than the minimum Fo recommended for the food in question. However, the use of the Fo value for the coldest can fail to statistically explain all the practical occurrences in food heat treatment processes. Thus, as a result of intense experimental work, we aimed to develop a new focus to determine the lowest Fo value, which we renamed the critical Fo. The critical Fo is based on a statistical model for the interpretation of the results of heat penetration assays in packages, and it depends not only on the Fo values found at the coldest point of the package and the coldest point of the equipment, but also on the size of the batch of packages processed in the retort, the total processing time in the retort, and the time between CIPs of the retort. In the present study, we tried to explore the results of physical measurements used in the validation of food heat processes. Three examples of calculations were prepared to illustrate the methodology developed and to introduce the concept of critical Fo for the processing of canned food.

Computational fluid dynamics evaluation of liquid food thermal process in a brick shaped package

Food processes must ensure safety and high-quality products for a growing demand consumer creating the need for better knowledge of its unit operations. The Computational Fluid Dynamics (CFD) has been widely used for better understanding the food thermal processes, and it is one of the safest and most frequently used methods for food preservation. However, there is no single study in the literature describing thermal process of liquid foods in a brick shaped package. The present study evaluated such process and the influence of its orientation on the process lethality. It demonstrated the potential of using CFD to evaluate thermal processes of liquid foods and the importance of rheological characterization and convection in thermal processing of liquid foods. It also showed that packaging orientation does not result in different sterilization values during thermal process of the evaluated fluids in the brick shaped package.

Processing of chopped mussel meat in retort pouch

Abstract Chopped mussel meat packaged in retort pouches was processed in a laboratory-scale water immersion retort, adapted for processing under overpressure conditions. Retort temperature effects on product yield and on cook value were evaluated by setting the F0 at 7 min. The effects of different pre-treatments (salting and marination) on the characteristics of mussels were evaluated after processing at retort temperature of 118 °C and during a whole year of storage at 25 °C. The salted samples showed better yield during storage, while no differences were found for the other physicochemical parameters.

Sperm utilization patterns in Gryllus integer (orthoptera: gryllidae

Sperm competition is the competition for fertilizations between ejaculates, within a female, following multiple mating. There are four sperm utilization or precedence patterns: first male precedence, where the first male to mate fertilizes most of the eggs laid by a female; last male precedence, where the last male to mate fertilizes most of the eggs laid by a female; "all-or-none" pattern, where sperm from either male fertilizes all the eggs laid by a female but which male's sperm that is used is random; or sperm mixing, where sperm from each male is used equally in fertilizing eggs laid by a female. Intermediate utilization patterns are also possible. Sperm competition occurs in a wide variety of insect species as well as other animals. This study was undertaken to study sperm competition in the field cricket, Gryllus integer. Four experiments were conducted: a radiation and sterilization experiment, a diapause experiment, and 2 competition experiments. It was found that 7,000 rad of gamma radiation sterilized adult ~ integer males. There was no diapause in the laboratory in ~ integer eggs. In the first competition experiment, three groups of females were used: females mated with a normal male, then with a second normal male (NN group); females mated with a normal male, and then with a sterile male (NR group); and females mated with a sterile male, and then with a normal male (RN group). The results obtained from this experiment showed that the mean proportion of eggs hatched was significantly different between 3 groups of females, with the proportion hatched much greater in the NN group than in either the NR or RN groups. The pattern for the proportion of eggs hatched following a double mating most closely resembled a pattern expected if sperm mixing is occurring. Results obtained in the replicate competition experiment showed that the mean proportion of eggs hatched for the females in the NR group was significantly lower than the proportion hatched in the other two groups. This also supports a model of sperm mixing as a precedence pattern. Values calculated following Boorman and Parker (1976), for the proportion of eggs fertilized by the second male to mate following a double mating, were 0.57 in competition experiment 1 and 0.62 in the replicate. These values indicate that sperm mixing occurs in~ integer.

Étude des mécanismes d’inactivation des microorganismes suite à un traitement à l’ozone

Une partie du travail a mené a un dépôt de brevet.

Les politiques de stérilisation sexuelle au Canada et aux États-Unis : une pratique à l'intersection de rapports de genre, de race et de classe

Dans ce mémoire, l’objectif poursuivi sera d’éclairer les dynamiques de genre, de race, de classe, de nation et de handicap à travers le phénomène du contrôle des capacités reproductives des femmes. Dans un premier temps, j’essaierai de comprendre comment les passés coloniaux du Canada et des États-Unis ont structuré leur rapport à la reproduction et comment celle-ci est devenue un enjeu politique de premier plan au sein de l’idéologie eugéniste. Dans un deuxième temps, j’explorerai quel a été le rôle de la science dans la mise en place, en Occident, de systèmes experts capables de guider la société vers le Progrès. Ces réflexions me permettront de retracer quel a été le contexte d’émergence des lois sur la stérilisation sexuelle et quels discours de légitimation ont été mis de l’avant afin de justifier l’appropriation des capacités reproductives de certaines populations jugées « indésirables ». Ainsi, je poserai l’hypothèse que les valeurs et présupposés « scientifiques » racistes, sexistes et classistes sous-jacents à l’élaboration de ces lois ont mené à des stérilisations forcées de certains groupes minorisés, c’est-à-dire les femmes autochtones au Canada et les femmes noires aux États-Unis. Je tenterai alors d’évaluer si, effectivement, les politiques de stérilisation aux Canada et aux États-Unis ont été discriminatoires dans leur formulation et dans leur mise en application à l’égard de ces populations. Finalement, je mobiliserai les figures de la welfare queen et de la squaw afin de comprendre comment ces identités assignées ont permis de légitimer un traitement différencié à leur égard et comment elles structurent encore aujourd’hui leur rapport à la sexualité et à la reproduction.

Évaluation in vitro de la stérilisation au peroxyde d'hydrogène sur les propriétés biologiques de prothèses utilisées lors de stabilisation du genou chez le chien

Objectif—Comparer les effets de la stérilisation au plasma de gaz de peroxyde d’hydrogène (HPGP) à l’oxyde d’éthylène (EO) et à la vapeur (ST) sur les propriétés physico-chimiques et d’adhésion bactérienne de fils de nylon et de polyéthylène. Design expérimental—Etude in vitro. Matériel—Des brins non stérilisés, stérilisés au HPGP, à l’EO et ST; de fil nylon leader (FNL), de fil de nylon pêche (FNP) et de fil de polyéthylène (PE) ont été utilisés. Méthodes—Une analyse de surface au spectroscope photo-électronique à rayons X (XPS), une mesure de l’angle de contact, une analyse par microscopie à force atomique (AFM) et l’adhésion bactérienne de Staphylococcus intermedius et d’Escherichia Coli ont été testés sur les brins. Résultats—Une oxydation de la surface de tous les échantillons stérilisés a été observée quelque soit la méthode de stérilisation. La stérilisation a augmenté significativement l’angle de contact pour tous les types de fil quelque soit la méthode. La rugosité n’a pas été affectée significativement par la méthode de stérilisation pour le FNL et FNP. L’adhésion bactérienne a été affectée significativement par la méthode de stérilisation. Le PE a un angle de contact, une rugosité et une adhésion bactérienne significativement plus élevée que le FNL et FNP, peu importe la méthode de stérilisation. Conclusion—La stérilisation au HPGP constitue une alternative intéressante à la vapeur et l’EO. Le PE n’est peut être pas un matériel idéal par sa capacité d’adhésion bactérienne. De futures études sont nécessaires pour déterminer la signification clinique de ces trouvailles.

Étude de l'influence de la réassociation en surface des atomes N et O sur l'inactivation des spores bactériennes dans une post-décharge N2-O2 basse pression en flux

Le recours au plasma pour stériliser des dispositifs médicaux (DM) est un domaine de recherche ne datant véritablement que de la fin des années 1990. Les plasmas permettent, dans les conditions adéquates, de réaliser la stérilisation à basse température (≤ 65°C), tel qu’exigé par la présence de polymères dans les DM et ce contrairement aux procédés par chaleur, et aussi de façon non toxique, contrairement aux procédés chimiques comme, par exemple, l’oxyde d’éthylène (OEt). Les laboratoires du Groupe de physique des plasmas à l’Université de Montréal travaillent à l’élaboration d’un stérilisateur consistant plus particulièrement à employer les effluents d’une décharge N2-%O2 basse pression (2-8 Torrs) en flux, formant ce que l’on appelle une post-décharge en flux. Ce sont les atomes N et O de cette décharge qui viendront, dans les conditions appropriées, entrer en collisions dans la chambre de stérilisation pour y créer des molécules excitées NO*, engendrant ainsi l’émission d’une quantité appréciable de photons UV. Ceux-ci constituent, dans le cas présent, l’agent biocide qui va s’attaquer directement au bagage génétique du micro-organisme (bactéries, virus) que l’on souhaite inactiver. L’utilisation d’une lointaine post-décharge évite du même coup la présence des agents érosifs de la décharge, comme les ions et les métastables. L’un des problèmes de cette méthode de stérilisation est la réduction du nombre de molécules NO* créées par suite de la perte des atomes N et O, qui sont des radicaux connus pour interagir avec les surfaces, sur les parois des matériaux des DM que l’on souhaite stériliser. L’objectif principal de notre travail est de déterminer l’influence d’une telle perte en surface, dite aussi réassociation en surface, par l’introduction de matériaux comme le Téflon, l’acier inoxydable, l’aluminium et le cuivre sur le taux d’inactivation des spores bactériennes. Nous nous attendons à ce que la réassociation en surface de ces atomes occasionne ainsi une diminution de l’intensité UV et subséquemment, une réduction du taux d’inactivation. Par spectroscopie optique d’émission (SOE), nous avons déterminé les concentrations perdues de N et de O par la présence des matériaux dans le stérilisateur, ainsi que la diminution de l’émission UV en découlant. Nous avons observé que cette diminution des concentrations atomiques est d’autant plus importante que les surfaces sont catalytiques. Au cours de l’étude du phénomène de pertes sur les parois pour un mélange N2-%O2 nous avons constaté l’existence d’une compétition en surface entre les atomes N et O, dans laquelle les atomes d’oxygènes semblent dominer largement. Cela implique qu’au-delà d’un certain %O2 ajouté à la décharge N2, seuls les atomes O se réassocient en surface. Par ailleurs, l’analyse des courbes de survie bi-phasiques des micro-organismes a permis d’établir une étroite corrélation, par lien de cause à effet, entre la consommation des atomes N et O en surface et la diminution du taux d’inactivation des spores dans la première phase. En revanche, nous avons constaté que notre principal agent biocide (le rayonnement ultraviolet) est moins efficace dans la deuxième phase et, par conséquent, il n’a pas été possible d’établir un lien entre la diminution des concentrations et le taux d’inactivation de cette phase-là.

STANDARDIZATION OF PROCESS PARAMETERS FOR READY TO EAT FISH PRODUCTS IN INDIGENOUS POLYMER COATED TIN FREE STEEL CANS

In the present work, Indigenous polymer coated Tin Free Steel cans were analyzed fortheir suitability for thermal processing and storage of fish and fish products following standard methods. The raw materials used for the development of ready to eat thermally processed fish products were found to be of fresh condition. The values for various biochemical and microbiological parameters of the raw materials were well within the limits. Based on the analysis of commercial sterility, instrumental colour, texture, WB-shear force and sensory parameters, squid masala processed to F0 value of 8 min with a total process time of 38.5 min and cook value of 92 min was chosen as the optimum for squid masala in tin free steel cans while shrimp curry processed to F0 7 min with total process time of 44.0 min and cook value of 91.1 min was found to be ideal and was selected for storage study. Squid masala and shrimp curry thermally processed in indigenous polymer coated TFS cans were found to be acceptable even after one year of storage at room temperaturebased on the analysis of various sensory and biochemical parameters. Analysis of the Commission Internationale d’ Eclirage L*, a* and b* color values showed that the duration of exposure to heat treatment influenced the color parameters: the lightness (L*) and yellowness (b*)decreased, and the redness (a*) significantly increased with the increase in processing time or reduction in processing temperature.Instrumental analysis of texture showed that hardness-1 & 2 decreased with reduction in retort temperature while cohesiveness value did not show any appreciable change with decrease in temperature of processing. Other texture profile parameters like gumminess, springiness and chewiness decreased significantly with increase of processing time. W-B shear force values of mackerel meat processed at 130 °C were significantly higher than those processed at 121.1 and 115 °C. HTST processing of mackerel in brine helped in reducing the process time and improving the quality.The study also indicated that indigenous polymer coated TFS cans with easy openends can be a viable alternative to the conventional tin and aluminium cans. The industry can utilize these cans for processing ready to eat fish and shell fish products for both domestic and export markets. This will help in reviving the canning industry in India.

The impact of sterilisation on family relationships

The major objective of the researcher was to assess the gains or losses in relationship between spouses after sterilization of the wife. The second objective was to gauge the impact of sterilisation upon parent—child relationships. Factors that were responsible in motivating women to accept sterilization were subjected to enquiry with the conviction that the information would give insight into the inadequacies of the official Family Planning Programme, offering prospects for feasible and salutary changes. The report is arranged under six chapters. The first chapter, Introduction, has three parts. The global and natural dimension of the problem of population is considered in Part I; The Importance of the topic studied namely sterilisation is discussed in the second Part: and Part III explains the background and methodology %f the study. The second chapter is a description of tubecto~ mized women who were the respondents. Their personal and family data, economic, social, educational and demographic profilesform its contents. The direct and indirect influences that were-responsible to make women decide in favour of sterilization are dealt with in the Third chapter. The Fourth Chapter is an analysis of the interspouse relations pre and post—operatively and an assessment of gains and losses in the area subsequent to sterilisation. How children have benefitted physically and emotionally as a consequence of improved care/attention from parents post~operatively constitutes the analysis attempted in the Fifth chapter.

Studies on arbuscular mycorrhiza (AM) in the Alentejo (Portugal) using pea mutants resistant to AM fungi as a control tool for field conditions

The utilization and management of arbuscular mycorrhiza (AM) symbiosis may improve production and sustainability of the cropping system. For this purpose, native AM fungi (AMF) were sought and tested for their efficiency to increase plant growth by enhanced P uptake and by alleviation of drought stress. Pot experiments with safflower (Carthamus tinctorius) and pea (Pisum sativum) in five soils (mostly sandy loamy Luvisols) and field experiments with peas were carried out during three years at four different sites. Host plants were grown in heated soils inoculated with AMF or the respective heat sterilized inoculum. In the case of peas, mutants resistant to AMF colonization were used as non-mycorrhizal controls. The mycorrhizal impact on yields and its components, transpiration, and P and N uptake was studied in several experiments, partly under varying P and N levels and water supply. Screening of native AMF by most probable number bioassays was not very meaningful. Soil monoliths were placed in the open to simulate field conditions. Inoculation with a native AMF mix improved grain yield, shoot and leaf growth variables as compared to control. Exposed to drought, higher soil water depletion of mycorrhizal plants resulted in a haying-off effect. The growth response to this inoculum could not be significantly reproduced in a subsequent open air pot experiment at two levels of irrigation and P fertilization, however, safflower grew better at higher P and water supply by multiples. The water use efficiency concerning biomass was improved by the AMF inoculum in the two experiments. Transpiration rates were not significantly affected by AM but as a tendency were higher in non-mycorrhizal safflower. A fundamental methodological problem in mycorrhiza field research is providing an appropriate (negative) control for the experimental factor arbuscular mycorrhiza. Soil sterilization or fungicide treatment have undesirable side effects in field and greenhouse settings. Furthermore, artificial rooting, temperature and light conditions in pot experiments may interfere with the interpretation of mycorrhiza effects. Therefore, the myc- pea mutant P2 was tested as a non-mycorrhizal control in a bioassay to evaluate AMF under field conditions in comparison to the symbiotic isogenetic wild type of var. FRISSON as a new integrative approach. However, mutant P2 is also of nod- phenotype and therefore unable to fix N2. A 3-factorial experiment was carried out in a climate chamber at high NPK fertilization to examine the two isolines under non-symbiotic and symbiotic conditions. P2 achieved the same (or higher) biomass as wild type both under good and poor water supply. However, inoculation with the AMF Glomus manihot did not improve plant growth. Differences of grain and straw yields in field trials were large (up to 80 per cent) between those isogenetic pea lines mainly due to higher P uptake under P and water limited conditions. The lacking N2 fixation in mutants was compensated for by high mineral N supply as indicated by the high N status of the pea mutant plants. This finding was corroborated by the results of a major field experiment at three sites with two levels of N fertilization. The higher N rate did not affect grain or straw yields of the non-fixing mutants. Very efficient AMF were detected in a Ferric Luvisol on pasture land as revealed by yield levels of the evaluation crop and by functional vital staining of highly colonized roots. Generally, levels of grain yield were low, at between 40 and 980 kg ha-1. An additional pot trial was carried out to elucidate the strong mycorrhizal effect in the Ferric Luvisol. A triplication of the plant equivalent field P fertilization was necessary to compensate for the mycorrhizal benefit which was with five times higher grain yield very similar to that found in the field experiment. However, the yield differences between the two isolines were not always plausible as the evaluation variable because they were also found in (small) field test trials with apparently sufficient P and N supply and in a soil of almost no AMF potential. This similarly occurred for pea lines of var. SPARKLE and its non-fixing mycorrhizal (E135) and non-symbiotic (R25) isomutants, which were tested in order to exclude experimentally undesirable benefits by N2 fixation. In contrast to var. FRISSON, SPARKLE was not a suitable variety for Mediterranean field conditions. This raises suspicion putative genetic defects other than symbiotic ones may be effective under field conditions, which would conflict with the concept of an appropriate control. It was concluded that AMF resistant plants may help to overcome fundamental problems of present research on arbuscular mycorrhiza, but may create new ones.

Factores de riesgo asociados a embarazo ectópico

Introducción: El embarazo ectópico es la primera causa de mortalidad materna durante el primer trimestre del embarazo, y la realidad sociocultural de nuestro país indica que las mujeres están exponiéndose cada vez más a factores que aumentan el riesgo para embarazo ectópico. Se pretende evaluar la asociación de los factores de riesgo en una institución de cuarto nivel. Metodología: Se realizó un estudio de casos y controles, con un caso por cada dos controles, escogidos por medio de un muestreo aleatorio simple. Resultados: Se incluyó un total de 200 pacientes. Ambas poblaciones fueron comparables. La edad promedio de casos fue 29 años y de los controles 24.6 años; la mayoría estaban casadas o en unión libre. Con respecto a los factores de riesgo con resultados estadísticamente significativos (p 0,000) se encontró que existe un mayor riesgo de embarazo ectópico con edad entre 18-35 años, estrato socioeconómico bajo, presencia de ETS, estar casada, tener periodo intergenésico prolongado, haber tenido cirugías pélvicas previas, no usar anticonceptivos, tener endometriosis y tener antecedente de embarazo ectópico (p=0,000). El factor de riesgo más alto es el antecedente de un embarazo ectópico previo OR 66.2 IC95% 60.4 – 72.0 seguido de tener endometriosis con OR 20.2 IC95% 18.6 – 21.9. (p 0,000). Discusión: Los factores de riesgo para embarazo ectópico en el presente estudio son concordantes con otros descritos en la literatura. Es importante conocer a fondo los datos presentados para mejorar los índices de esta patología a nivel nacional.

Exploratory Study on Occupational Health Exposure to Chemical Agents, in a Public Hospital in Valencia, Venezuela. Preliminar Assessment

Descriptive study that identified chemical agents (AQ) use and training on risk management and waste disposal techniques in a public Hospital in Valencia. A questionnaire was answered by 48 workers. Information obtained was: personal data, occupational history, AQ used; knowledge of risk management and waste disposal. There were 16 occupations from 12 “High Risk” areas. “Adult emergency” was the one with more workers (11 individuals), followed by “sterilization” and “clinical laboratory” (7 each) and oncology (5). The remained areas had less than 8.3% workers. The most used anesthetic agents were: Halothane, Enfluorane and Isofluorane 4.17% each and main antineoplastics used were: Doxorubicin 16.67% and Paclitaxel, 5-Fluoracil and Etoposide, 8.33% each. The most mentioned substances were: alcohol (70.8%) and Chlorine (64.6%). None of the answers regarding knowledge of AQ’ risk management and waste disposal was satisfactory. Statistical associations between training and several variables such as age, time in their job and being or not a professional, resulted non-significant. The correlation between training and the knowledge of AQ’s management was significant (p < 0.001). Participants showed that their knowledge about chemical occupational risk factors they are exposed to is still insufficient. Therefore, this theme should be included in graduate course curricula. These results provide important data and will serve as a pilot research for the follow up Phase II study that will include clinical aspects and environmental and biological monitoring.

Estudio de cultivos celulares primarios derivados de Lucilia sericata (Diptera: Calliphoridae)

The main purpose of this study was to obtain primary cell cultures derived from Lucilia sericata (Diptera: Calliphoridae). Necrophagous this fly is used for determination of post-mortem interval and larval therapy. Since explants embryonated eggs were performed in various culture media (Grace Schneider, MM/VP12, DMEM, Grace/L-15 and L-15), supplemented with 20% fetal serum. Sterilization of the biological material was carried out by immersing it in formaldehyde and sodium hypochlorite solutions. The cell growth was initiated in the L-15, MM/VP12, and Schneider Grace/L-15 in an average time of 10 days after completion of planting by the proliferation of groups of colonies scattered on the surface of the boxes crops and also from the endings of larval fragments. The evolution of cell growth to the formation of monolayer semi-confluent was relatively fast, reaching at 3 weeks post-explant. Cellular morphology in cultured cells was heterogeneous, especially epithelioid forms, similar to nerve, giant and irregular. Comparison of the growth characteristics of these cell cultures with those obtained from other species of flies was more favorable in the evolution of those obtained from L. sericata, on the grounds that the cells are better adapted to the physical-chemical conditions of several culture media. This is the first report of a cell culture-fly family Calliphoridae.