999 resultados para Tecidos - Transplantes
Resumo:
Em crustáceos, ainda não são conhecidas as fontes de aminoácidos e as rotas metabólicas envolvidas no controle da concentração intracelular de aminoácidos. Os experimentos deste trabalho tiveram como objetivo investigar se o estresse osmótico provoca alterações intrínsecas sobre o metabolismo de aminoácidos nos tecidos de C. granulatus submetidos a estresse agudo in vitro. Medimos a síntese e a mobilização de proteínas, a captação de aminoácidos e a produção de 14CO2 a partir de 14C-leucina no hepatopâncreas, músculo mandibular e brânquias anteriores e posteriores submetidos a estresse hipo e hiperosmótico agudo, in vitro. O controle da síntese de proteínas parece estar envolvido no ajuste metabólico da concentração intracelular de aminoácidos no hepatopâncreas, músculo mandibular e brânquias submetidos à alteração osmótica aguda, in vitro. Por outro lado, durante o estresse hiposmótico agudo, in vitro, a diminuição na captação de aminoácidos via sistema A e o aumento na oxidação total de 14C-L-leucina foram usados como mecanismos para reduzir as concentrações intracelulares de aminoácidos nas brânquias posteriores e anteriores, respectivamente. A captação de aminoácidos e a mobilização de 14C-proteina não foram mecanismos usados para aumentar a concentração intracelular de aminoácidos em todos os tecidos estudados.
Resumo:
A acidemia metilmalônica é uma desordem metabólica hereditária caracterizada bioquimicamente pelo acúmulo tecidual de ácido metilmalônico (MMA) e clinicamente por deterioração neurológica progressiva e falência renal. Os avanços no tratamento dessa doença alcançados nos últimos anos possibilitaram uma diminuição significativa na mortalidade dos mesmos. Entretanto, a morbidade continua alta, pois a maioria dos pacientes afetados por acidemia metilmalônica, mesmo recebendo o melhor tratamento disponível no momento, apresenta graus variáveis de comprometimento do sistema nervoso central refletido em retardo mental e atraso no desenvolvimento psicomotor. No presente estudo investigamos os efeitos in vivo da administração crônica do MMA em ratos Wistar durante o seu desenvolvimento (do 5º ao 28º dia de vida pós-natal) sobre o comportamento dos mesmos na tarefa do labirinto aquático de Morris. A tarefa foi realizada após um período de recuperação dos animais de 30 dias com o intuito de verificar dano neurológico permanente ou de longa duração nos animais. O labirinto aquático de Morris é uma tarefa bastante útil para a avaliação de aprendizado e memória espaciais. O protocolo da tarefa foi ligeiramente modificado para servir ao propósito de nosso trabalho, ou seja, o de avaliar o efeito da administração crônica de drogas sobre o comportamento de ratos. Verificamos que a administração crônica de MMA não provocou efeito no peso corporal, velocidade de natação e na fase de aquisição da tarefa. Porém, o tratamento prejudicou o desempenho dos animais no treino reverso, o que é condizente com comportamento perseverativo. Também avaliamos o efeito do ácido ascórbico, que foi administrado isoladamente ou em combinação com o MMA para testarmos se o estresse oxidativo poderia estar relacionado com as alterações comportamentais observadas no grupo tratado com MMA. Observamos que este antioxidante preveniu as alterações comportamentais provocadas pelo MMA, indicando que o estresse oxidativo pode estar envolvido com o efeito encontrado. Passamos então a avaliar o efeito in vitro do MMA sobre parâmetros de estresse oxidativo, mais especificamente na técnica de dosagem de substâncias reativas ao ácido tiobarbitúrico (TBA-RS), que é um parâmetro de lipoperoxidação, e sobre o potencial antioxidante total do tecido (TRAP) e a reatividade antioxidante do tecido (TAR), que são parâmetros de defesas antioxidantes teciduais. O MMA na concentração de 2,5 mM aumentou a lipoperoxidação in vitro em homogeneizado de estriado e hipocampo de ratos e diminuiu o TRAP e o TAR em homogeneizado de estriado de ratos. Tais resultados indicam fortemente que o MMA induz estresse oxidativo. Finalmente investigamos o efeito in vitro do MMA sobre a atividade enzimática dos complexos da cadeia respiratória em várias estruturas cerebrais e em órgãos periféricos em ratos de 30 dias de vida no sentido de melhor esclarecer os mecanismos fisiopatológicos dos danos teciduais desta doença. Verificamos que o MMA causou uma inibição significativa da atividade do complexo II da cadeia respiratória em estriado e hipocampo quando baixas concentrações de sucinato foram utilizadas no meio de incubação. Além disso, verificamos que este efeito inibitório do MMA sobre o complexo II ocorreu somente após exposição do homogeneizado ao ácido por pelo menos 10 minutos, além do que esta inibição não foi prevenida pela co-incubação com o inibidor da óxido nítrico sintetase Nω- nitro-L-argininametilester (L-NAME) ou por uma associação de catalase e superóxido dismutase. Estes resultados sugerem que as espécies reativas de oxigênio e nitrogênio mais comuns não estão envolvidas neste efeito, tornando improvável que a inibição do complexo II da cadeia respiratória seja mediada por estresse oxidativo. O MMA também causou uma inibição do complexo II-III em estriado, hipocampo, rim, fígado e coração; e inibiu o complexo I-III em fígado e rim. O complexo IV não foi afetado pela incubação com o ácido em nenhuma das estruturas testadas. Portanto, tomados em seu conjunto, estes resultados indicam que o MMA bloqueia a cadeia respiratória. Os resultados de nosso trabalho indicam que a administração crônica de MMA em ratos em desenvolvimento provocou alterações comportamentais de longa duração provavelmente mediadas por radicais livres, pois tais alterações foram prevenidas pelo antioxidante ácido ascórbico. O MMA também induziu estresse oxidativo in vitro em estriado e hipocampo e inibiu de forma diferenciada os complexos da cadeia respiratória nos tecidos estudados, sendo que as estruturas mais vulneráveis a esta ação foram o estriado e o hipocampo. Finalmente, nossos resultados sugerem que antioxidantes podem ajudar a prevenir, ou pelo menos atenuar, os danos teciduais provocados pelo MMA na acidemia metilmalônica.
Resumo:
This work reports the influence of the poly (ethylene terephthalate) textile surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min. Other parameters, such as working gas composition and treatment time, were modified as the following: to the O2 plasma modified samples only the treatment time was changed (10, 20, 30, 40, 50 and 60 minutes). To the plasma with O2 and N2 only the chemical concentrations were changed. Through Capillary tests (vertical) an increase in textile wettability was observed as well as its influence on aging time and its consequence on wettability. The surface functional groups created after plasma treatments were investigated using X-ray Photoelectron Spectroscopy (XPS). The surface topography was examined by scanning electron microscope (SEM)
Resumo:
As most current studies, reinforced plastics have been, in recent years, a viable alternative in building structural elements of medium and large, since the lightness accompanied by high performance possible. The design of hybrid polymer composites (combination of different types of reinforcements) may enable structural applications thereof, facing the most severe service conditions. Within this class of composite materials, reinforced the underlying tissues hybrid high performance are taking space when your application requires high load bearing and high rigidity. The objective of this research work is to study the challenges in designing these fabrics bring these materials as to its mechanical characterization and fracture mechanisms involved. Some parameters associated with the process and / or form of hybridization stand out as influential factors in the final performance of the material such as the presence of anisotropy, so the fabric weave, the process of making the same, normative geometry of the specimens, among others. This sense, four laminates were developed based hybrid reinforcement fabrics involving AS4 carbon fiber, kevlar and glass 49-E as the matrix epoxy vinyl ester resin (DERAKANE 411-350). All laminates were formed each with four layers of reinforcements. Depending on the hybrid fabric, all the influencing factors mentioned above have been studied for laminates. All laminates were manufactured industrially used being the lamination process manual (hand-lay-up). All mechanical characterization and study of the mechanism of fracture (fracture mechanics) was developed for laminates subjected to uniaxial tensile test, bending in three and uniaxial compression. The analysis of fracture mechanisms were held involving the macroscopic, optical microscopy and scanning electron microscopy
Resumo:
In this study, it has been investigated the influence of silver film deposition onto 100% polyester woven and non-woven, on the survival of Escherichia coli and Staphylococcus aureus in contact with these surfaces. The treatment was performedin a chamber containing the working gas at low pressure (~ 10-2 mbar). Some process parameters such as as voltage: 470 V; pressure: 10-2 mbar; current : 0.40 A and gas flow: 6 and 10 cm3/min were kept constant. For the treatments with purêargon plasma using a flow of 6 and 10 cm3/min, different treatment times were evaluated, such as, 10 , 20, 30, 40, 50 and 60 minutes. Contact angle (sessile drop), measurements were used to determine the surface tension of the treated fabrics and its influence on the bacteria grow as weel as the possibilities of a biofilm formation. The formation of a silver film, as well as the amount of this element was verified byEDX technique. The topography was observed through scanning electron microscopy (SEM) to determine the size of silver grains formed on the surfaces of the fabric and assess homogeneity of treatment. The X-ray diffraction (XRD) was used to analyze the structure of silver film deposition. The woven fabric treatments enabled the formation of silver particulate films with particle size larger than the non-woven fabrics. With respect to bacterial growth, all fabrics were shown to be bactericidal for Staphylococcus aureus (S. aureus), while for the Escherichia coli (E. coli), the best results were found for the non-woven fabric (TNT) treated with a flow of 10 cm3/min to both bacteria
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The experience of transplantation is a very serious situation from the clinical standpoint. Therefore, there must be some subjective and social breakdown in people who have been undergone such a procedure. Recent product of modernity, the transplanted is someone who owns his recover to the scientific advances of contemporary society and a deceased donor. This paper aims at examine the implications, from the changes in patterns of behavior and thought that occur after the experience of an extreme and critical situation, as the process of illness and its consequent transplant surgery. The symbolism of the heart suggests that some social impressions about the organ itself are also reflected in how the transplanted interprets the experience of this type of procedure. So investigating how the changes occurred throughout the process interfere in the re-insertion of these people to social life, after his recovery, is the purpose of this work. The concept of habitus coined by Pierre Bourdieu will be used to measure conceptually how this experience (clinical, modern and symbolic) fits in the contemporary discussion of sociology
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Despite of the technological advances that favor the transplant process, there are issues of effectiveness of care necessary for the maintenance of potential organ donors with brain death, which contribute to the no realization of transplants of organs and tissues of these patients. It is presupposed that the problems could be related to perceptions and understandings that the professionals of the units of internment have about the care required by the diagnosis of brain death. The aim of this study was to understand the meaning of the nursing care of the potential organ donor with brain death to the nursing staff. Descriptive study with qualitative approach guided by Action Science Theory and the critic-reflexive research methodology accomplished with five nurses and 19 nursing technicians from Operative Rehabilitation Center in a public hospital at Natal / RN, Brazil, between March and May 2013. Data were collected through semi-structured interviews with individual reflection about the care and through group interview, after approval by the Ethics and Research Committee, CAAE No.: 04255612.7.0000.5537. The analysis was performed in a thematic way according to Bardin. During the group meeting the participants were driven in a discussion about the need for change and how to perform them. The results indicate that the professionals actions are consistent with those required for maintenance of potential organ donors, although the material and human resources are not adequate. That situation leads the professionals to develop a meaning of care as one labor more, demanding more than they can give. They express beliefs and feelings concerning the hope that their care brings a greater good that is to save lives. The reflection for a possible change of action was difficult to accomplish due to professionals not to be able to self evaluate, what lead to direct your changes suggestions for other team members. It is concluded that the care provided to these patients is a difficult care, evidenced by suffering both death situation of the person cared and pain of their families, as the dehumanizing conditions of work, helping themselves to keep distance from patients to not suffer so much. The knowledge impregnated in their act, are scientific, ethical, aesthetic and personal kind with a predominance of the scientific followed by the personal. The study was also relevant to the practice of nursing in maintaining the potential donor, in that it allowed the identification of the knowledge used by nurses in their care practice and the meaning understanding of the professionals on the care provided, as a good action that brings satisfaction when the transplanting is executed. Other experiences are suggested with the critic-reflexive research methodology, both in research as in teaching nursing
Resumo:
O experimento foi realizado com o objetivo de avaliar o efeito da idade sobre o potencial de degradação dos diferentes tecidos da lâmina foliar e do colmo de capim-braquiária (Brachiaria decumbens), capim-gordura (Melinis minutiflora) e capim-tifton 85 (Cynodon sp). Foram amostradas a 7ª (capim-braquiária e capim-gordura) e a 11ª (capim-tifton 85) lâminas foliares, no dia da exposição da lígula e 20 dias após. Por meio de observações ao microscópio foram estimadas a extensão da digestão in vitro dos tecidos da lâmina e do colmo e a redução na espessura da parede de células do esclerênquima do colmo. Lâminas foliares e segmentos de colmos jovens apresentaram maiores áreas digeridas. Permaneceram intactos os tecidos com células de parede espessada e lignificada, a bainha parenquimática dos feixes, o esclerênquima, o xilema e a epiderme do colmo. Tecidos com células de parede delgada, normalmente não-lignificada, o mesofilo, o floema e o parênquima, desapareceram completamente. O avanço na idade reduziu a digestão do mesofilo, em lâminas de capim-braquiária e capim-gordura, e do parênquima em colmos, principalmente de capim-gordura. A epiderme na lâmina foliar foi parcialmente digerida, independentemente da idade e da espécie. Embora aparentemente intactas, células esclerenquimáticas do colmo sofreram redução da espessura da parede com a incubação em líquido ruminal. A porcentagem de redução variou de 7 a 37% e a taxa de redução da espessura de 0,007 a 0,018 µm/h.
Resumo:
There are a number of damaging mechanisms that various materials can suffer in service. However, when working with polymer composite materials, this is something that requires analysis, especially when exposed to adverse environmental conditions. Thus, the objective of the present thesis is the study of the direct influence of environmental aging and the form of hybridization of the reinforcement woven on the structural stability, surfacedegradation and fracture process of polymer composites laminates. For this, the development of two polymer composite laminates was necessary, where one of them was reinforced with a bi-directional woven with hybrid strandsofkevlar-49/glass-Efibers, and the other also with a bi-directionalwoven, however with weft and warpformed of alternating strandsof Kevlar-49 fibers and glass-E fiber The reinforcementwoven are industrially manufactured. Both laminates use a polyester resin as a matrixand are made up of four layers each. All laminates were industrially prepared by the hand lay-up method of manufacturing. To do this, test specimens were manufactured of the respective laminates and submitted to environmental aging accelerated through the aging chamber. They were exposed to alternating cycles of UV radiation and moisture (heated steam) for a standard defined period. At the end of the exposure period the specimens were subjected to mechanical tests of uniaxial tensile and bending in three points and to the characterizationsof the fracture and surface deterioration. In addition, they were submitted to a structural degradation assessment by the measurement of mass variation technique (MMVT) and the measurement of thickness variation technique (MTVT), this last technique being developed in this thesis. At the end of the analysis it was observed that the form of hybridization of the reinforcement woven and the aging process directly influence with losses or gain in mechanical properties, with losses in the structural degradation and in the formation and propagation of damage mechanism of the developedcomposite laminates
Resumo:
The utilization of synthetic fibers for plastic reinforcement is more and more frequent and this growing interest requires that their mechanic behavior under the most variable conditions of structural applications be known. The use of such materials in the open and exposed to the elements is one of them. In this case, it becomes extremely necessary to study their mechanical properties (strength, stiffness) and the mechanism of fracture by which the environment aging them out. In order to do that, the material must be submitted to hot steam and ultraviolet radiation exposure cycles, according to periods of time determined by the norms. This study proposal deals with the investigation of accelerated environmental aging in two laminated polymeric composites reinforced by hybrid woven made up of synthetic fibers. The configurations of the laminated composites are defined as: one laminate reinforced with hybrid woven of glass fibers/E and Kevlar fibers/49 (LHVK) and the other laminate is reinforced with hybrid tissue of glass fibers/E and of carbon fibers AS4 (LHVC). The woven are plane and bidirectional. Both laminates are impregnated with a thermofix resin called Derakane 470-300 Epoxy Vinyl-Ester and they form a total of four layers. The laminates were industrially manufactured and were made through the process of hand-lay-up. Comparative analyses were carried out between their mechanical properties by submitting specimen to uniaxial loading tractions and three-point flexion. The specimen were tested both from their original state, that is, without being environmentally aging out, and after environmental aging. This last state was reached by using the environmental aging chamber
Resumo:
Materials known as technical textiles can be defined as structures designed and developed to meet specific functional requirements of various industry sectors, which is the case in automotive and aerospace industries, and other specific applications. Therefore, the purpose of this work presents the development and manufacture of polymer composite with isophthalic polyester resin. The reinforcement of the composite structure is a technical textile fabric made from high performance fibers, aramid (Kevlar 49) and glass fiber E. The fabrics are manufactured by the same method, with the aim of improving the tensile strength of the resulting polymer composite material. The fabrics, we developed some low grammage technical textile structures in laboratory scale and differentiated-composition type aramid (100%), hybrid 1 aramid fiber / glass (65/35%) and hybrid 2 aramid fiber / glass (85/15% ) for use as a reinforcing element in composite materials with unsaturated isophthalic polyester matrix. The polymer composites produced were tested in uniaxial tensile fracture surface and it´s evaluated by SEM. The purpose of this work characterize the performance of polymer composites prepared, identifying changes and based on resistance to strain corresponding to the mechanical behavior. The objectives are to verify the capability of using this reinforcement structure, along with the use of high performance fibers and resin in terms of workability and mechanical strength; verify the adherence of the fiber to the matrix and the fracture surface by electron microscopy scanning and determination of tensile strength by tensile test. The results indicate that, in a comparative study to the response of uniaxial tensile test for tensile strength of the composites and the efficiency of the low percentage of reinforcement element, being a technical textile fabric structure that features characteristic of lightness and low weight added in polymer composites
Resumo:
Os polímeros biodegradáveis, como o poliácido láctico (PLA) apesar de consolidado nos campos farmacêuticos, médico e biomédico como biomateriais úteis para aplicações variadas, porém, depende da necessidade de funcionalizar a sua superfície estudando suas propriedades tais como hidrofilidade e hidrofobicidade favorecendo a interação do polímero com os materiais de aplicação farmacêutica, médica e biomédica. Este trabalho tem como objetivo produzir um material com características diferentes em cada um de seus lados, sendo um lado hidrofílico e o outro hidrofóbico. O substrato têxtil utilizado neste estudo foi um tecido de malha de composição 100% PLA que é biodegradável e biocompatível, o que possibilita sua aplicação na área biomédica. Para modificação superficial foi utilizado o tratamento a plasma de baixa pressão. A técnica de modificação de superfície por plasma foi escolhida por ser uma tecnologia limpa, anticorrosiva e não tóxica ao contrario de muitos processos químicos convencionais utilizados na indústria têxtil, além disso, não afeta as propriedades de massa do substrato. Neste estudo, um lado da superfície do substrato foi tratado com plasma oxigênio, argônio e nitrogênio, para o trabalho de melhoria da hidrofilidade da superfície e metano para a hidrofobicidade da amostra. A espectroscopia de emissão ótica (OEE) foi utilizada para fazer o diagnóstico das espécies do plasma durante o tratamento. Após o tratamento a plasma as amostras foram caracterizadas por medidas de ângulo de contato, microscopia eletrônica de varredura (MEV), Espectroscopia de fotoelétrons de raios-X (XPS), Infravermelho com Transformada de Fourier (FTIR) de reflexão total atenuada (ATR), medidas da área de espalhamento do líquido e arraste vertical. Onde foi caracterizado o aumento e diminuição da molhabilidade das amostras tratadas por plasma bem como as variáveis que contribuíram para tal efeito. O tratamento das amostras de PLA com O2 + CH4 apresenta comportamento hidrofílico no lado tratado com O2, apresentando aumento de rugosidade e grupos funcionais e no lado tratado com CH4, apresentando a formação de um filme polimérico formado sobre a superfície da amostra. O tratamento com N2 + CH4 apresenta comportamento hidrofóbico, porém com variações no fluxo do CH4 tem-se um controle da molhabilidade na superfície das amostras, podendo ir de hidrofóbico a hidrofílico, neste tratamento as amostras apresentaram pequenas diferenças de molhabilidade entre os lados tratados com plasma de N2 e com plasma de CH4