An ultra-broadband spatially dispersed regenerative amplifier free from spatial chirp

An ultra-broadband Ti:sapphire regenerative amplifier based on spatially dispersed amplification is demonstrated experimentally. Departing from previous reports, a new design of the cavity gets the amplified pulse free from spatial chirp. Utilizing this new regenerative amplifier, chirped pulses with bandwidth (FWHM) of about 80 nm are obtained, and the bandwidth is limited only by that of the incident seed pulses.

The design of a controllable imaging device with the cold atomic medium

Under the circumstance of a Gaussian control field, the cold atomic medium with electromagnetically induced transparency (EIT) turns out to be the special medium with the quadratic index distribution which is controllable online. In our study, the optical system occupies a portion of the EIT medium which acts as an imaging device. With the help of the Collins formula, the analytic expression for the spatial distribution of the probe field in the cold atomic medium is obtained as well as the location of the imaging. The methods for improving the visibility of the imaging are proposed in this paper. Moreover, we also show that the shapes of the images on the output are strongly influenced by the intensity of the control field, which provides a potential optical processing method.

Design and evaluation of an optical switching node

[EN]For a good development of elastic optical networks, the design of flexible optical switching nodes is required. This work analyses the previously proposed flexible architectures and, based on the most appropriate, which is the Architecture on Demand (AoD), proposes a specific configuration of the node that includes spatial and spectral switching and the wavelength conversion functionality with a low blocking probability and the minimum amount of modules; the characteristics of the traffic that the designed node is able to cope with are specified in the last chapter. An evaluation of the designed node is also done, and, compared to the other architectures, it is shown that the Architecture on Demand gives better results than others and that it has a higher potential for future developments.

Design guidelines and characteristics of beam-shaping microstructure optical fibers

Microstructure optical fibers with flat-top fundamental mode are first proposed by introducing a low-index inner core into the core of index-guiding microstructure optical fibers. The design guidelines and characteristics of beam-shaping microstructure optical fibers are demonstrated. The interrelationships of inner-core index with laser wavelength, air hole diameter and size of inner core are investigated. The influence of the relative size of inner core on the spatial profile of the fundamental mode is demonstrated. Moreover, sensitivity of the flat-top fundamental mode profile from the slight change of the optimum inner-core index value is studied. Starting from these results we deduce that it is possible to fabricate beam-shaping microstructure fibers with nowadays technique. (C) 2005 Elsevier B.V. All rights reserved.

Community Turnover of Wood-Inhabiting Fungi across Hierarchical Spatial Scales

For efficient use of conservation resources it is important to determine how species diversity changes across spatial scales. In many poorly known species groups little is known about at which spatial scales the conservation efforts should be focused. Here we examined how the community turnover of wood-inhabiting fungi is realised at three hierarchical levels, and how much of community variation is explained by variation in resource composition and spatial proximity. The hierarchical study design consisted of management type (fixed factor), forest site (random factor, nested within management type) and study plots (randomly placed plots within each study site). To examine how species richness varied across the three hierarchical scales, randomized species accumulation curves and additive partitioning of species richness were applied. To analyse variation in wood-inhabiting species and dead wood composition at each scale, linear and Permanova modelling approaches were used. Wood-inhabiting fungal communities were dominated by rare and infrequent species. The similarity of fungal communities was higher within sites and within management categories than among sites or between the two management categories, and it decreased with increasing distance among the sampling plots and with decreasing similarity of dead wood resources. However, only a small part of community variation could be explained by these factors. The species present in managed forests were in a large extent a subset of those species present in natural forests. Our results suggest that in particular the protection of rare species requires a large total area. As managed forests have only little additional value complementing the diversity of natural forests, the conservation of natural forests is the key to ecologically effective conservation. As the dissimilarity of fungal communities increases with distance, the conserved natural forest sites should be broadly distributed in space, yet the individual conserved areas should be large enough to ensure local persistence.

Structural Synthesis of 3-DoF Spatial Fully Parallel Manipulators

In this paper, the architectures of three degrees of freedom (3-DoF) spatial, fully parallel manipulators (PMs), whose limbs are structurally identical, are obtained systematically. To do this, the methodology followed makes use of the concepts of the displacement group theory of rigid body motion. This theory works with so-called 'motion generators'. That is, every limb is a kinematic chain that produces a certain type of displacement in the mobile platform or end-effector. The laws of group algebra will determine the actual motion pattern of the end-effector. The structural synthesis is a combinatorial process of different kinematic chains' topologies employed in order to get all of the 3-DoF motion pattern possibilities in the end-effector of the fully parallel manipulator.

Design à mostra: o projeto de museus temáticos

O objetivo desse trabalho é compreender como o design é utilizado no espaço expositivo para construir contexto, conteúdo e linguagem. Entender quais estratégias são usadas para projetar ambientes atraentes à visitação em vista a proporcionar experiências coletivas e individuais, contemplativas, espaciais (imersivas), sensoriais e interativas. Para tal analisamos a mudança do papel dos museus ao longo do tempo e montamos um panorama das instituições museológicas no Brasil nas últimas décadas. Selecionamos padrões de exibição instituídos historicamente em termos mundiais, já que o Brasil sofreu enorme influência cultural da Europa e dos Estados Unidos. Estabelecemos uma base de conceitos que envolvem a linguagem do projeto de exposições e museus temáticos, considerando aspectos como formas de aprendizagem do público, comportamento deste em relação ao objeto exposto, produção de conteúdo, produção de sentido, escolha de linguagem, intencionalidade, construção de experiência, mediação e interface. Analisamos como estudo de caso, o projeto de dois museus temáticos contemporâneos, o Museu da Língua Portuguesa e o Museu do Futebol, com a intenção de construir uma crítica ao projeto espacial-visual, entendendo as relações estabelecidas entre os objetos (previamente existentes ou projetados produtos, textos, imagens, vídeos), a forma como eles são expostos e as características do local escolhido para abrigar a exposição.

Design à mostra: o projeto de museus temáticos

O objetivo desse trabalho é compreender como o design é utilizado no espaço expositivo para construir contexto, conteúdo e linguagem. Entender quais estratégias são usadas para projetar ambientes atraentes à visitação em vista a proporcionar experiências coletivas e individuais, contemplativas, espaciais (imersivas), sensoriais e interativas. Para tal analisamos a mudança do papel dos museus ao longo do tempo e montamos um panorama das instituições museológicas no Brasil nas últimas décadas. Selecionamos padrões de exibição instituídos historicamente em termos mundiais, já que o Brasil sofreu enorme influência cultural da Europa e dos Estados Unidos. Estabelecemos uma base de conceitos que envolvem a linguagem do projeto de exposições e museus temáticos, considerando aspectos como formas de aprendizagem do público, comportamento deste em relação ao objeto exposto, produção de conteúdo, produção de sentido, escolha de linguagem, intencionalidade, construção de experiência, mediação e interface. Analisamos como estudo de caso, o projeto de dois museus temáticos contemporâneos, o Museu da Língua Portuguesa e o Museu do Futebol, com a intenção de construir uma crítica ao projeto espacial-visual, entendendo as relações estabelecidas entre os objetos (previamente existentes ou projetados produtos, textos, imagens, vídeos), a forma como eles são expostos e as características do local escolhido para abrigar a exposição.

Spatial and temporal distribution and the potential for estuarine interactions between wild and hatchery chum salmon (Oncorhynchus keta) in Taku Inlet, Alaska

We investigated estuarine spatial and temporal overlap of wild and marked hatchery chum salmon (Oncorhynchus keta) fry; the latter included two distinct size groups released near the Taku River estuary (Taku Inlet) in Southeast Alaska (early May releases of ~ 1.9 g and late May releases of ~ 3.9 g wet weight). Our objectives were to compare abundance, body size, and condition of wild chum salmon fry and hatchery chum salmon fry raised under early and late rearing strategies in different habitats of Taku Inlet and to document environmental factors that could potentially explain the distribution, size, and abundance of these chum salmon fr y. We used a sampling design stratified into inner and outer inlet and neritic and littoral habitats. Hatchery fry were rare in the inner estuary in both years but outnumbered wild fry 20:1 in the outer estuary. Hatchery fry were significantly larger than wild fry in both littoral and neritic samples. Abundances of wild and hatchery fry were positively correlated in the outer inlet, indicating the formation of mixed schools of hatchery and wild fry. Spatial and temporal overlap was greatest between wild and early hatchery fry in the outer inlet in both habitats. The early hatchery release coincided with peak abundances of wild fry in the outer inlet, and the distribution of wild and early hatchery fry overlapped for about three weeks. Our results demonstrate that the timing of release of hatchery fry may affect interactions with wild fry.

Application of an acoustic–trawl survey design to improve estimates of rockfish biomass

Biomass estimates of several species of Alaskan rockfishes exhibit large interannual variations. Because rockfishes are long lived and relatively slow growing, large, short-term shifts in population abundance are not likely. We attribute the variations in biomass estimates to the high variability in the spatial distribution of rockfishes that is not well accounted for by the survey design currently used. We evaluated the performance of an experimental survey design, the Trawl and Acoustic Presence/Absence Survey (TAPAS), to reduce the variability in estimated biomass for Pacific ocean perch (Sebastes alutus). Analysis of archived acoustic backscatter data produced an acoustic threshold for delineating potential areas of high (“patch”) and low (“background”) catch per unit of effort (CPUE) in real time. In 2009, we conducted a 12-day TAPAS near Yakutat, Alaska. We completed 59 trawls at 19 patch stations and 40 background stations. The design performed well logistically, and Pacific ocean perch (POP) accounted for 55% of the 31 metric tons (t) of the catch from this survey. The resulting estimates of rockfish biomass were slightly less precise than estimates from simple random sampling. This difference in precision was due to the weak relationship of CPUE to mean volume backscattering and the relatively low variability of POP CPUE encountered. When the data were re-analyzed with a higher acoustic threshold than the one used in the field study, performance was slightly better with this revised design than with the original field design. The TAPAS design could be made more effective by establishing a stronger link between acoustic backscatter and CPUE and by deriving an acoustic threshold that allows better identification of backscatter as that from the target species.

Monitoring Hawaii’s marine protected areas: examining spatial and temporal trends using a seascape approach

Hawaii’s coastal marine resources have declined dramatically over the past 100 years due to multiple anthropogenic stressors including overfishing, coastal development, pollution, overuse, invasive species and climate change. It is now becoming evident that ecosystem-based management, in the form of marine protected areas (MPAs), is necessary to conserve biodiversity, maintain viable fisheries, and deliver a broad suite of ecosystem services. Over the past four decades, Hawaii has developed a system of MPAs to conserve and replenish marine resources around the state. These Marine Life Conservation Districts (MLCDs) vary in size, habitat quality, and management regimes, providing an excellent opportunity to test hypotheses concerning MPA design and function using multiple discreet sampling units. NOAA/NOS/NCCOS/Center for Coastal Monitoring and Assessment’s Biogeography Branch used digital benthic habitat maps coupled with comprehensive ecological studies between 2002 and 2004 to evaluate the efficacy of all existing MLCDs using a spatially-explicit stratified random sampling design. The results from this work have shown that areas fully protected from fishing had higher fish biomass, larger overall fish size, and higher biodiversity than adjacent areas of similar habitat quality. Other key findings demonstrated that top predators and other important fisheries species were more abundant and larger in the MPAs, illustrating the effectiveness of these closures in conserving these populations. Habitat complexity, protected area size and habitat diversity were the major factors in determining effectiveness among MPAs.

Biogeographic characterization of fish communities and associated benthic habitats within the Flower Garden Banks National Marine Sanctuary: sampling design and implementation of scuba surveys on the coral caps

The Flower Garden Banks National Marine Sanctuary (FGBNMS) is located in the northwestern Gulf of Mexico approximately 180 km south of Galveston, Texas. The sanctuary’s distance from shore combined with its depth (the coral caps reach to within approximately 17 m of the surface) result in limited exposure of this coral reef ecosystem to natural and human-induced impacts compared to other coral reefs of the western Atlantic. In spite of this, the sanctuary still confronts serious impacts including hurricanes events, recent outbreaks of coral disease, an increase in the frequency of coral bleaching and the massive Diadema antillarum die-off during the mid-1980s. Anthropogenic impacts include large vessel anchoring, commercial and recreational fishing, recreational scuba diving, and oil and gas related activities. The FGBNMS was designated in 1992 to help protect against some of these impacts. Basic monitoring and research efforts have been conducted on the banks since the 1970s. Early on, these efforts focused primarily on describing the benthic communities (corals, sponges) and providing qualitative characterizations of the fish community. Subsequently, more quantitative work has been conducted; however, it has been limited in spatial scope. To complement these efforts, the current study addresses the following two goals put forth by sanctuary management: 1) to develop a sampling design for monitoring benthic fish communities across the coral caps; and 2) to obtain a spatial and quantitative characterization of those communities and their associated habitats.

Optical learning in a smart spatial light modulator

A synaptic plane rendered by an array of smart pixels was described regarding its application as a complementary component for neural network implementation. The smart spatial light modulator featured auto-modification abilities. Thus, an optical system incorporating this device can show self-reliant optical learning. Furthermore, the optical system design, in the area of its optical interconnection scheme, is highly flexible since the independent weight-plane pixels eliminated the difficulty between weight update calculation and weight representation.

The silicon backplane design for an LCOS polarization-insensitive phase hologram SLM

Polarization-insensitivity is achieved in a reflective spatial light modulator by laying a quarter-wave plate (QWP) at the incident wavelength directly over the mirror pixels of a silicon backplane, and forming a nematle Fréedrickcz cell over the QWP to modulate the reflected phase. To achieve the highest drive voltage from the available silicon process, a switched voltage common front electrode design is described, with variable amplitude square wave drive to the pixels to maintain constant root-mean-square drive and minimize phase fluctuations during the dc balance refresh cycle. The silicon has been fabricated and liquid-crystal-on-silicon cells both with and without the QWP assembled; applications include optically transparent switches for optical networks, beam steering for add-drop multiplexers for wavelength-division- multiplexing telecommunications, television multicast, and holographic projection.