Inibição do vírus da hepatite C utilizando siRNAs direcionados para o genoma viral e proteínas celulares Hsps

Pós-graduação em Microbiologia - IBILCE

Avaliação da temperatura ambiente de criação e da reutilização da cama no desempenho e na qualidade da carne de frango

Pós-graduação em Zootecnia - FCAV

Expressão e imunidade das Heat Shock Proteins (HSP) em gestantes portadoras de diabete e hiperglicemia gestacional leve

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Comportamento térmico de coberturas em camadas duplas e estudo da substituição da cama por piso plástico na qualidade do ar, desempenho e índice de lesões em frangos de corte

Pós-graduação em Zootecnia - FCAV

Modelagem e otimização por metodologia de superfícies de resposta: um estudo em arames de aço SAE 9254 para molas automobilísticas

Pós-graduação em Engenharia Mecânica - FEG

Estudo da fragilização ao revenido em aço liga de 2,25CR-1MO através do ensaio de indentificação instrumentada

2,25Cr-1Mo alloy steels are widely used in petrochemical plant equipments working in high temperature conditions because of their good mechanical proprieties in these conditions. Although, when exposed for a long time at high temperature, in the rage of 343 °C to 593 °C, may present the temper embrittlement phenomenon. The component named stripper of assembly converter of fluid catalytic cracking unit (UFCC) of studied plant is manufactured using this material, which is subject to temper embrittlement. The phenomenon of temper embrittlement refers to progressive lose of toughness, making the material brittle. With embrittlement, equipaments manufactured with this material are under risks to suffer brittle fracture in the cool down and start-up situations of them, which can cause catastrophic failures. By this reason, this research studies presence of temper ebrittlement phenomenon on this material. To verify the toughness of the material is conventionally used charpy V-notch test. However, this test requires the removing of samples of the material to make specimens. This fact becomes critical when talk about structural components of an equipment. So, this research also studies a non-destructive test that can be executes in-situ, known as instrumented indentation, as an alternative detection of the phenomenon at the component stripper, by comparative of the mechanical proprieties obtained by conventional tests in similar samples

Análise do comportamento térmico de paredes de madeira

This study consists in the observation and evaluation of the thermal behavior and distribution of wood composite walls, MDF – Medium Density Fiberboard, HDF – High Density Fiberboard, OSB – Oriented Strand Board and EGP – Edge Glued Panel. This study had the objective to present the experimental thermal behavior and to verify which one fit the thermal comfort standards for human labor For this work, was developed a thermal chamber, with one interchangeable side, so the wall prototypes would fit for each experiment. We studied walls made of MDF, HDF, OSB and EGP, which one had its own distinct behavior due to the panel construction. The EGP wall had shown the most reliable material for this usage at high temperatures. With this work, it was demonstrated the importance of choice for the right material and construction method for wooden composite walls, because if they were scaled poorly, the people exposed to them would be uncomfortable by the proportionate environment, and the costs for a resizing would be too high

Lean six sigma como estratégia para o aumento de eficiência em laminação de alumínio

This study aims to assess the implementation of Lean Six Sigma in the preparation of plates and hot lamination process for a company of aluminum rolled products, to improve the quality, productivity and process efficiency. As a basis for achieving these goals, the DMAIC methodology and various quality tools such as Cause Effect Diagram, Process Flow, SIPOC, Pareto, FMEA and Control Chart were used, trying to propose improvements to processes and increase their efficiency. The results were significant and were the basis for the continuation of a continuous improvement project throughout the factory

Estudo do envelhecimento da liga AA 7075 encruada

Aluminum alloys are widely used in industry, because they combine different mechanical properties according to the alloying elements used in addition to thermal and mechanical treatments performed, resulting in materials with good weight/resistance relation. The 7XXX series alloys are worked heat treatable alloys commonly used in the aerospace industry, especially due to their high mechanical properties obtained after aging heat treatment, which increases the interest around 7075 alloy. Some studies with alloys which can be aged show that it is possible that cold word processes affect the results of aging. Thus, this study was intended to verify the influence of the aging process of AA 7075 alloy. There were three routes of aging with specimens previously treated thermally. In the first route T6 treatment was performed with a annealed specimen and other in solid solution. The second was the natural aging in a annealed specimen. In the last route was done aging by steps with a annealed specimen and other in solid solution with the intention to reduce the effects of natural aging. The results show that the routes 1 and 3 had similar hardness for all the samples, showing that the validity of Route 3 as an alternative and also the hardening did not affect the hardness at the end of the process, significantly reducing the time required for the highest hardness. Finally, natural aging was less effective in increasing hardness

Processo de fabricação de tarugos pelo método HotTop de ligas de alumínio da série 6XXX e as não conformidades desse processamento

The goal of this work is to report some problems that occur in the in the production of aluminum billets (series 6XXX) produced by the hot top process in the Alcoa aluminum Inc. The aluminum fabrication process is described from its first stage, since the mining until the reduction, smelting and treatment of the metal. One of the plant’s final product, are billets for clients that produce profiles by extrusion. The product’s final quality highly depends on the whole production process. Therefore it’s necessary to use good practices in the treatment of the metal, follow up its fabrication and control its thermal treatment, in order to meet the required standards to satisfy the clients. The billet’s production method and its variables will be detailed through temperature and casting speed, cone of water flow, cooling rate, duration of thermal treatment, degassing and metal “in line “filtering, in other words when it’s still found in its liquid state. The non-conformities of the process were studied by metallographic analysis, both macrostutural and microstructural that will be described and discussed in this work

Abrigo emergencial temporário

Não disponível

Análise do conforto térmico da cidade de Mirandópolis/SP em seus espaços abertos

Mirandópolis/SP appeared in 1934 from the railroad “the Brazil Northwest”, that there it served one of the points of its stretch that had as main function to drain the agricultural production northwestern native of São Paulo of that time. The installation of the town happened absent of concerns with initial urbanístico planning, thus modifying its natural landscape and modifying characteristic ambient without compensatory measures aiming at a future expansion of the urban mesh. Fact this that still causes today consequences the quality of life of the people and also the observed thermal comfort later. Ahead of this, the present work had for objective to identify through measurements of temperature and relative humidity of the city of Mirandópolis/SP the differences that in the fabric urban they corroborate for a comfort situation or thermal discomfort to the outdoors in accordance with the Diagram Bioclimático de Olgyay the collection of data was made throughout the month of July of 2011 involving the attainment of information of Temperature and relative humidity of air and questionnaire applied to the passer-bys in the act of the measurements. Also approaching the different thermal dynamic of the zones of housing in relation to the Urban Cannyon that develops the commerce as predominant activity. This research sample that, although a city to be small, the quality of life of its inhabitants is not only guaranteed by the transport or that its thermal comfort reveals inside homogeneous of the urban perimeter, but that it has yes heterogeneidade in the scope of the urban climate in these spaces

CABARET Casa Noturna e Restaurante

O presente trabalho consiste na elaboração de um projeto de uma casa noturna e restaurante, com uma temática, na cidade de Presidente Prudente. Ele é caracterizado por tratar-se de questões relativas à Arquitetura e Urbanismo, envolvendo os confortos ambientais, especialmente o acústico, e sua implantação em uma cidade média com uma grande população universitária, e que polariza várias cidades da sua região. Além disso, a construção de tal edificação tem como objetivo impulsionar o setor e contribuir para a consolidação do circuito de lazer noturno na cidade. O projeto apresenta dois serviços diferenciados que, no entanto se complementam – os serviços alimentícios e a danceteria. Em um primeiro momento mostram-se integrados, mas podendo funcionar separadamente. Levando em consideração a efemeridade e o dinamismo deste tipo de empreendimento, busca-se, através da arquitetura, solucionar os problemas técnicos referentes à acústica; buscando também atender os anseios e desejos de seus frequentadores, criando espaços de convívio e proporcionando diferentes sensações

Estudo de casos de seleção dos materiais e processos para a fabricação de fuselagens

This work proposes a study on the materials selections and processes for the manufacture of aircraft and showing a methodology to reduce the manufacturing cost. The DFMA can be understood as a methodology that aims at reducing manufacturing and assembly costs and coupled with the increase of product quality through design simplifications. The most commonly material used in the manufacture of aircraft is aluminum alloys due to these possess great structural strength, good elasticity, and being stainless having a low specific weight (about 1/3 that of steel), reducing the weight of the aircraft. A case study in which an operation in the process of verifying the quality was generating unnecessary costs time / man for the company was also developed. The problem solution was simple, just removing the attachment process. It was found that the DFMA methodology is extremely important for the simplification of processes and projects, contributing to the reduction of manufacturing costs of aircraft

Estudo da variação do limite de resistência à tração ao longo da bobina de vergalhão de alumínio 1350 AA

Therebar of aluminum 1350 AA produced by CBA are used inthe manufacture of wires and cables for electric power transmission, which marketshows increasingly favorableto aluminum due to itslow densityand high electrical conductivity, but to ensure that this materialmeets all specifications of projectsfor electricity transmission, it must have homogeneity in the chemicaland mechanicalproperties.One of the points of improvement in the process of rod production isreducing the high variation of the limitof tensile strengthalong the coils, therefore, this work seeks a better understanding of the factors that significantly influence the mechanical properties of rebar, specifically assessing the influence oftemperatureat the output of the coils, which can cause a recovery effect on the material andif thereare relevantdifferences between the two modes of rebar production: auto and manual.Samples of six coils have been specifically produced forthis study, which weresubsequently subjected to different annealing temperatures for one hour and ten minutes, similar to what occurs in the output of the coil from the machine. The tensile tests showed that aluminum 1350 AA is significantly influenced by temperature, whose behavior was very similar to that presented in the literature. It was found that the phenomenon of recovery occurred more significantly at high temperatures. Through the optical electron microscope Zeiss, 18 surface maps were made with 100x magnification for each sample in different conditions and the images were analyzed using entropy and fractal dimension, aiming to relate the condition of surface hardening on mechanical property of the samples in that condition. The results showed that these methods can be applied, provided they do not have any kind of imperfection on the surface, once they can influence the results. The study concluded that a more efficient cooling is required in ... (Complete abstract click electronic access below)