Definição de requisitos de software baseada numa arquitetura de modelagem de negócios

Não é uma tarefa fácil definir requisitos para os sistemas de software que darão suporte a um negócio, dada a dinâmica de mudanças nos processos. O levantamento de requisitos tem sido feito de forma empírica, sem o apoio de métodos sistematizados que garantam o desenvolvimento baseado nos reais objetivos do negócio. A engenharia de software carece de métodos que tornem mais ordenadas e metódicas as etapas de modelagem de negócios e de levantamento de requisitos de um sistema. Neste artigo é apresentada uma metodologia de desenvolvimento de software resultante da incorporação de atividades propostas para modelagem de negócios e levantamento de requisitos, baseadas em uma arquitetura de modelagem de negócios. Essas atividades tornam o desenvolvimento de software mais sistemático e alinhado aos objetivos da organização, e podem ser incorporadas em qualquer metodologia de desenvolvimento baseada no UP (Unified Process - Processo Unificado).

Integrating open source codes for solid modeling and automatic mesh generation in FEM applications

The applications of the Finite Element Method (FEM) for three-dimensional domains are already well documented in the framework of Computational Electromagnetics. However, despite the power and reliability of this technique for solving partial differential equations, there are only a few examples of open source codes available and dedicated to the solid modeling and automatic constrained tetrahedralization, which are the most time consuming steps in a typical three-dimensional FEM simulation. Besides, these open source codes are usually developed separately by distinct software teams, and even under conflicting specifications. In this paper, we describe an experiment of open source code integration for solid modeling and automatic mesh generation. The integration strategy and techniques are discussed, and examples and performance results are given, specially for complicated and irregular volumes which are not simply connected. © 2011 IEEE.

Simulation of dynamic pinion course using Runge-Kutta's method and impact modeling

Once defined the relationship between the Starter Motor components and their functions, it is possible to develop a mathematical model capable to predict the Starter behavior during operation. One important aspect is the engagement system behavior. The development of a mathematical tool capable of predicting it is a valuable step in order to reduce the design time, cost and engineering efforts. A mathematical model, represented by differential equations, can be developed using physics laws, evaluating force balance and energy flow through the systems degrees of freedom. Another important physical aspect to be considered in this modeling is the impact conditions (particularly on the pinion and ring-gear contact). This work is a report of those equations application on available mathematical software and the resolution of those equations by Runge-Kutta's numerical integration method, in order to build an accessible engineering tool. Copyright © 2011 SAE International.

Electrical Power Distribution System modeling with VHDL-AMS for the construction of a Real-Time Digital Simulator using FPGAS devices

This paper presents a distribution feeder simulation using VHDL-AMS, considering the standard IEEE 13 node test feeder admitted as an example. In an electronic spreadsheet all calculations are performed in order to develop the modeling in VHDL-AMS. The simulation results are compared in relation to the results from the well knowing MatLab/Simulink environment, in order to verify the feasibility of the VHDL-AMS modeling for a standard electrical distribution feeder, using the software SystemVision™. This paper aims to present the first major developments for a future Real-Time Digital Simulator applied to Electrical Power Distribution Systems. © 2012 IEEE.

Free tools and strategies for the generation of 3D finite element meshes: Modeling of the cardiac structures

The Finite Element Method is a well-known technique, being extensively applied in different areas. Studies using the Finite Element Method (FEM) are targeted to improve cardiac ablation procedures. For such simulations, the finite element meshes should consider the size and histological features of the target structures. However, it is possible to verify that some methods or tools used to generate meshes of human body structures are still limited, due to nondetailed models, nontrivial preprocessing, or mainly limitation in the use condition. In this paper, alternatives are demonstrated to solid modeling and automatic generation of highly refined tetrahedral meshes, with quality compatible with other studies focused on mesh generation. The innovations presented here are strategies to integrate Open Source Software (OSS). The chosen techniques and strategies are presented and discussed, considering cardiac structures as a first application context. © 2013 E. Pavarino et al.

Construção,modelagem e controle de um pêndulo invertido com CLP e software scada

Pós-graduação em Engenharia Elétrica - FEIS

Modelo para análise de negociação em projetos de sistemas em uma fábrica de software baseado em pontos de caso de uso.

A Modelagem de Sistemas vêm sendo cada vez mais aplicada nos meios de produção para as mais diversas finalidades, incluindo a área de Projeto de Sistemas, com o intuito de definir o número de pessoas na equipe, analisar o esforço, o tamanho do software e os custos totais do projeto. Este trabalho tem por finalidade desenvolver um modelo de apoio à análise baseado em Pontos de Caso de Uso (PCU). Para isso, utiliza-se de vários métodos de pesquisa entre elas a pesquisa exploratória e de laboratório para criar um modelo de apoio para a análise.

Gestão de riscos baseada no conhecimento: modelo conceitual para empresas de desenvolvimento de software

Pós-graduação em Engenharia Mecânica - FEG

Modeling of piezoelectric energy harvesting considering the dependence of the rectifier circuit

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modelagem do transporte de sedimentos na alta Bacia do Córrego Cachoeirinha (Rio Claro, SP) através do software Soil and Water Assessment Tool (SWAT)

This study aimed to simulate and evaluate the sediment transport in Upper Basin Stream Cachoeirinha in Rio Claro, SP, and compare the results with previous studies performed in the same basin. The modeling software used in this study was Soil and Water Assessment Tool (SWAT), which is a very comprehensive tool that discusses many physical processes. In this work, the hydrosedimentological processes were treated, aiming to understand the sediment production and transport. The Basin Stream Cachoeirinha has an area with predominantly agricultural use, especially sugar cane. The database for inclusion in software was constructed from the following elements: climatic, topographical, soil type and use and land cover of the area, also including the parameters of Modified Universal Soil Loss Equation (MUSLE). The analysis was conducted for a period of 16 years (1994-2010), which is the range of data available from CEAPLA. The results were analyzed in terms of annual runoff and sediment yield. The average sediment delivery in the simulation was 0.94 t/ha/year, while the maximum annual contribution was 7.28 t/ha/year

Projeto mecânico de um modelo para túnel de vento e validação de seus componentes à partir de simulações em software de elementos finitos

The objective of this study was to develop a model that allows testing in the wind tunnel at high angles of attack and validates its most critical components by analyzing the results of simulations in finite element software. During the project this structure suffered major loads identified during the flight conditions and, from these, we calculated the stresses in critical regions defined as the parts of the model that have higher failure probabilities. All aspects associated with Load methods, mesh refining and stress analysis were taken into account in this approach. The selection of the analysis software was based on project needs, seeking greater ease of modeling and simulation. We opted for the software ANSYS® since the entire project is being developed in CAD platforms enabling a friendly integration between software's modeling and analysis

Mapeamento de ontologias empresariais para modelos de processos de negócio em BPMN, com aplicação em processos de software

Pós-graduação em Ciência da Computação - IBILCE

Modeling architecture and reference models for the ERF5 project

The adoption of ERPs systems by small and middle-sized companies may not be possible due to their cost. At the same time, when adapting ERP to the company's particular needs, the user keeps depending on the system's sellers due to the lack of access and knowledge of the respective code. Free and open-source software may promote advantages to the enterprises, however, for its adoption it is necessary the development of techniques and tools in order to facilitate its deployment and code maintenance. This article emphasizes the importance of defining modeling architectures and reference models for the development and maintenance of open-source ERPs, in special the ERP5 project.

Aplicação do software Autodesk™ inventor na elaboração do projeto de um redutor de velocidades

Through a current and practical approach, this work aims to demonstrate how a speed reducer would behave in a real situation, but using a digital environment. Therefore, first, it was made the modeling of each component of the reducer, driven by gears. Completed the modeling of the components, it was possible to realize the connection between them and thus characterize the work as a speed reducer; and using properly sized and shaped reducer, we could finally demonstrate the operation of the same, the very Autodesk Inventor ™ 2014 environment

Avaliação do software Autodesk Revit 2016 para quantificação por meio da modelagem da informação da construção

The building budgeting quickly and accurately is a challenge faced by the companies in the sector. The cost estimation process is performed from the quantity takeoff and this process of quantification, historically, through the analysis of the project, scope of work and project information contained in 2D design, text files and spreadsheets. This method, in many cases, present itself flawed, influencing the making management decisions, once it is closely coupled to time and cost management. In this scenario, this work intends to make a critical analysis of conventional process of quantity takeoff, from the quantification through 2D designs, and with the use of the software Autodesk Revit 2016, which uses the concepts of building information modeling for automated quantity takeoff of 3D model construction. It is noted that the 3D modeling process should be aligned with the goals of budgeting. The use of BIM technology programs provides several benefits compared to traditional quantity takeoff process, representing gains in productivity, transparency and assertiveness