Effects of leveling agent on the uptake of reactive dyes by untreated and plasma-treated wool

Atmospheric-pressure plasma treatment of wool fabric produced a significantly higher level of adsorbed fiber-reactive dye when applied at 50 °C (pH 3.0–6.0) in the absence of any organic leveling agent. In addition, color yields indicated that dye was more uniformly adsorbed by the plasma-treated fabric compared with the untreated material. When untreated fabric was dyed in the presence of a leveling agent (Albegal B), the extent and levelness of dye sorption were enhanced. These enhancements were, however, relatively small on the plasma-treated wool compared with those on untreated wool. A ‘surface’ mechanism, similar to that proposed when plasma-treated wool is dyed in the absence of leveling agent, can explain the leveling ability of Albegal B under adsorption conditions. Increasing the dyebath temperature to 90 °C resulted in dye penetration of the fibers. Under these conditions, any enhancements of dye uptake produced by the plasma treatment, as well as the use of Albegal B, were relatively small, in contrast to the behavior at 50 °C. Improvements in the uniformity of dye sorption observed at 50 °C were, however, maintained at the higher temperature. It is concluded that the inability of reactive dyes to migrate (and so promote leveling and uniformity) once they have reacted with the fiber, means that differences in the uniformity of dye sorbed at 50 °C are still apparent at equilibrium.

Effects of plasma treatment of wool on the uptake of sulfonated dyes with different hydrophobic properties

A wool fabric has been subjected to an atmospheric-pressure treatment with a helium plasma for 30 seconds. X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry confirmed removal of the covalently-bound fatty acid layer (F-layer) from the surface of the wool fibers, resulting in exposure of the underlying, hydrophilic protein material. Dye uptake experiments were carried out at 50 ºC to evaluate the effects of plasma on the rate of dye uptake by the fiber surface, as well as give an indication of the adsorption characteristics in the early stages of a typical dyeing cycle. The dyes used were typical, sulfonated wool dyes with a range of hydrophobic characteristics, as determined by their partitioning behavior between water and n-butanol. No significant effects of plasma on the rate of dye adsorption were observed with relatively hydrophobic dyes. In contrast, the relatively hydrophilic dyes were adsorbed more rapidly (and uniformly) by the plasma-treated fabric. It was concluded that adsorption of hydrophobic dyes on plasma-treated wool was influenced by hydrophobic interactions, whereas electrostatic effects predominated for dyes of more hydrophilic character. On heating the dyebath to 90 ºC in order to achieve fiber penetration, no significant effect of the plasma treatment on the extent of uptake or levelness of a relatively hydrophilic dye was observed as equilibrium conditions were approached.

The effect of dyes on photo-induced chemiluminescence emission from polymers

Weak photo-induced chemiluminescence (PICL) emission is observed when polymers are exposed to UVA or visible light. The presence of dyes can either increase PICL intensity via Type I photosensitisation which generates polymer free radicals, or reduce it via photo-protection. PICL studies on the eight Blue Wool Standards (BWSs) that are used commercially as lightfastness standards show higher PICL intensity from the least photostable BWSs that use triphenylmethane dyes and lower intensity from more photostable BWSs using UVA and visible wavelengths. The relative PICL intensities do not correlate in a stepwise manner with lightfastness ratings of the BWSs. However dye/polymer combinations that emit high levels of PICL relative to the undyed material are unlikely to have acceptable lightfastness. The xanthene dyes fluorescein and eosin Y are more strongly photosensitising than triphenylmethane dyes on wool and both produce higher PICL emission than undyed wool when irradiated with visible light.

Effect of atmospheric plasma treatment on pad-dyeing of natural dyes on wool

Plasma treatment is an emerging surface modification technique that alters dye uptake of wool without using chemicals or water for pre-treatment. Padding is an established continuous dyeing technique known for its efficient use of water, time and energy. This study combined these two techniques for colouration of wool fabric using two natural dyes derived from the Acacia plant family. The investigation focused on the effects of plasma treatment and obtaining unique patterning effects. Helium (100%) and a mixture of helium and nitrogen (95%/5%) were used as the plasma gases under atmospheric conditions. Plasma treated wool fabric was padded with the above natural dyes. Copper sulphate and ferrous sulphate were applied on the dyed fabric as mordant yielding neutral shades of beige and grey respectively. Up to a 30% enhancement of dye adsorption on plasma treated wool substrate was observed as compared to untreated sample for both gases used. This higher adsorption indicates the hydrophilic character of the natural dyes used. Key performance parameters such as fastness to washing, rubbing and light were tested and found to be satisfactory. A single process tone-on-tone pattern was achieved by controlling the plasma exposure of treated area. This study concluded that a merger of natural dyes with modern plasma treatment and padding techniques for wool colouration was feasible.

Study on the dyeing properties of hemicyanine dyes. I. Acrylic fabrics

Three hemicyanine dyes were employed in dyeing acrylic fabrics following traditional cationic dyeing procedures. The influence of the substituting groups of the dye molecule on the sorption rate and sorption isotherms was analyzed. The results showed that those dyed acrylic fabrics using hemicyanine dyes had obvious fluorescent effect in the spectra range 550–750 nm. In addition, according to the EN-471 standard (2003), the chromaticity of dyed acrylic fabric was calculated to evaluate whether hemicyanine dye could meet the requirements of the fluorescent dye for high visibility warning clothing.

Template-free synthesis of functional 3D BN architecture for removal of dyes from water.

Three-dimensional (3D) architectures are of interest in applications in electronics, catalysis devices, sensors and adsorption materials. However, it is still a challenge to fabricate 3D BN architectures by a simple method. Here, we report the direct synthesis of 3D BN architectures by a simple thermal treatment process. A 3D BN architecture consists of an interconnected flexible network of nanosheets. The typical nitrogen adsorption/desorption results demonstrate that the specific surface area for the as-prepared samples is up to 1156 m(2) g(-1), and the total pore volume is about 1.17 cm(3) g(-1). The 3D BN architecture displays very high adsorption rates and large capacities for organic dyes in water without any other additives due to its low densities, high resistance to oxidation, good chemical inertness and high surface area. Importantly, 88% of the starting adsorption capacity is maintained after 15 cycles. These results indicate that the 3D BN architecture is potential environmental materials for water purification and treatment.

Degradation of organic dyes by P25-reduced graphene oxide: influence of inorganic salts and surfactants

Treatment of coloured effluent treatment is a major issue for the textile industry. In this study, catalyst P25-graphene was prepared and applied for degrading dye from an aqueous solution. Three types of dyes were selected to determine the feasibility of the catalyst for the dye degradation, including sulphonic, azoic, and fluorescent dyes. P25-graphene catalyst showed good ability to degrade all selected dyes. The influence of inorganic salts and surfactants on the photocatalytic degradation of rhodamine B using catalyst P25-graphene was also investigated. The degradation of rhodamine B was suppressed by the presence of NaCl, but the effect of Na2SO4 was negligible. The degradation of rhodamine B was significantly suppressed by all three types of surfactant, namely anionic, cationic and non-ionic surfactants. NMR technique was used to investigate the mechanisms associated with this suppression.

Bioremediation of Dyes in Textile Effluents by Aspergillus oryzae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ligninases production by Basidiomycetes strains on lignocellulosic agricultural residues and their application in the decolorization of synthetic dyes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)