Actinella species (Bacillariophyta) from an Amazon black water floodplain lake (Amazonas - Brazil)

The genus Actinella Lewis was studied using planktonic samples from a black water floodplain lake in Central Amazon region. For species identification the taxa were morphological and morphometricaly analyzed on base in light microscope (LM) and scanning electronic microscope (SEM). Five species were registered: Actinella brasiliensis Grunow, A. guianensis Grunow, A. gracile Kociolek, A. mirabilis (Eulenstein ex Grunow) Grunow and A. robusta Hustedt. A. gracile is reported for the first time for Amazon State and black water systems and it is firstly documented with SEM. In addition, a review of geographic distribution of Actinella species in Brazilian Amazon region is given.

Assessing the application of polypropylene multifilament yarns in brain phantoms

The currently available clinical imaging methods do not provide highly detailed information about location and severity of axonal injury or the expected recovery time of patients with traumatic brain injury [1]. High-Definition Fiber Tractography (HDFT) is a novel imaging modality that allows visualizing and quantifying, directly, the degree of axons damage, predicting functional deficits due to traumatic axonal injury and loss of cortical projections. This imaging modality is based on diffusion technology [2]. The inexistence of a phantom able to mimic properly the human brain hinders the possibility of testing, calibrating and validating these medical imaging techniques. Most research done in this area fails in key points, such as the size limit reproduced of the brain fibers and the quick and easy reproducibility of phantoms [3]. For that reason, it is necessary to develop similar structures matching the micron scale of axon tubes. Flexible textiles can play an important role since they allow producing controlled packing densities and crossing structures that match closely the human crossing patterns of the brain. To build a brain phantom, several parameters must be taken into account in what concerns to the materials selection, like hydrophobicity, density and fiber diameter, since these factors influence directly the values of fractional anisotropy. Fiber cross-section shape is other important parameter. Earlier studies showed that synthetic fibrous materials are a good choice for building a brain phantom [4]. The present work is integrated in a broader project that aims to develop a brain phantom made by fibrous materials to validate and calibrate HDFT. Due to the similarity between thousands of hollow multifilaments in a fibrous arrangement, like a yarn, and the axons, low twist polypropylene multifilament yarns were selected for this development. In this sense, extruded hollow filaments were analysed in scanning electron microscope to characterize their main dimensions and shape. In order to approximate the dimensional scale to human axons, five types of polypropylene yarns with different linear density (denier) were used, aiming to understand the effect of linear density on the filament inner and outer areas. Moreover, in order to achieve the required dimensions, the polypropylene filaments cross-section was diminished in a drawing stage of a filament extrusion line. Subsequently, tensile tests were performed to characterize the mechanical behaviour of hollow filaments and to evaluate the differences between stretched and non-stretched filaments. In general, an increase of the linear density causes the increase in the size of the filament cross section. With the increase of structure orientation of filaments, induced by stretching, breaking tenacity increases and elongation at break decreases. The production of hollow fibers, with the required characteristics, is one of the key steps to create a brain phantom that properly mimics the human brain that may be used for the validation and calibration of HDFT, an imaging approach that is expected to contribute significantly to the areas of brain related research.

Wear of PEEK-Ti6Al4V systems under micro-abrasion and linear sliding conditions

Dissertação de mestrado integrado em Engenharia Biomédica

Flexible thin-film lithium battery

Tese de Doutoramento Programa Doutoral em Engenharia Electrónica e Computadores.

Combustion of alternative biomass fuels in a domestic boiler and in a large-scale furnace

Programa Doutoral em Engenharia Mecânica.

Ultramorphology of the metapleural gland in three species of Atta (Hymenoptera, Formicidae)

Differences among the metapleural glands of four female castes of Atta bisphaerica Forel, 1908, A. capiguara Gonçalves, 1944 and A. sexdens rubropilosa Forel, 1908 were examined by scanning electron microscope. There were no differences in gland size between the same castes of these species, although the opening gland in A. sexdens rubropilosa had been twice as large as A. bisphaerica. The relative size and functional significance of the metapleural gland among different castes is discussed and similarities between these and the other Formicidae till now studied is presented.

Notes on the male genitalia of species of Ravinia and Chaetoravinia (Diptera: Sarcophagidae)

Based on scanning electron microscope (SEM) estudies, the male genitalia of three species of Ravinia and two species of Chaetoravinia (Diptera: Sarcophagidae, subtribe Raviniina) are described and compared.

Sexual distinction between 5th instar nymphs of six species of Triatominae (Hemiptera, Reduviidae)

The aim of this paper is to present the analysis of sexual morphological differences observed in 5th instar nymphs of the following species: Panstrongylus megistus; Rhodnius neglectus; Triatoma brasiliensis; T. infestans; T. matogrosensis and T. tibiamaculata. Male and female nymphs were examined and photographed with a Scanning Electron Microscope. The 9th segment dimensions of dorsal and ventral faces were determined through a Profile Projector. Results and statistical analysis showed significant differences: the 9th sternite is significantly broader in male than female nymphs, while in five species; tergites in female nymphs are broad and in male are narrow.

Ultrastructure of the egg of Muscina stabulans and Synthesiomyia nudiseta (Diptera: Muscidae)

The eggs of Muscina stabulans and Synthesiomyia nudiseta are morphologically described, based on scanning electron microscope (SEM).

Ultrastructure of the adults of Bunostomum phlebotomum (Nematoda: Ancylostomatidae)

The morphology of the male and female of Bunostomum phlebotomum are described based on scanning electron microscope (SEM) observations. The attachment of the worms to the small intestinal mucosa and during the copula were observed. Structures of the bucal capsule and genital organs were also studied.

Systematics of Triatoma sordida, T. guasayana and T. patagonica (Hemiptera, Reduviidae)

Because of the relative epidemiological significance of Triatoma sordida, T. guasayana and T. patagonica, and the need to resolve doubts about their taxonomic validity, we report here a detailed taxonomic comparison of the three species using multivariate analysis of morphometric measures combined with comparisons of their genitalia and antennal structures. From the 17 metric variables studied, the length of the second segment of the rostrum and the anteocular length provided a discrimination function able to separate without error T. sordida from T. guasayana and T. patagonica. The multivariate discriminant functions classified T. guasayana and T. patagonica with an error of 2.44%. Comparison of the male genitalia of T. guasayana and T. sordida showed that there are minor differences in the articulatory apparatus, the median process of the pygophore, the phallosome support and the vesica, with bigger differences in the endosomal process and the phallosome. However, the already described male genitalia of T. patagonica is very similar to that of T. sordida. Analysis of antennal structure by scanning electron microscope showed that sensilla distribution around the pedicel is slightly different in the three species and sensilla density is highest in T. sordida and lowest in T. patagonica. The study showed that the three species form a closely related group. The results confirm the earlier classification of sordida and guasayana as separate species, but they raise some doubts about the taxonomic status of T. patagonica.

Ultrastructure of the male terminalia of Cochliomyia hominivorax and C. macellaria

Cochliomyia hominivorax and C. macellaria are species that cause primary and secondary myiasis, respectively of medical and veterinary importance in the New World. The male terminalia of both insects show morphological differences that are now described from scanning electron microscope (SEM) observations.

The First Instar Larva of Lutzomyia longipalpis (Diptera: Phlebotomidae)

The morphology and chaetotaxy of the first instar larva of Lutzomyia (Lutzomyia) longipalpis are described based on observations made under scanning electron microscope. Because three-dimensional images were studied, some terminological changes are proposed to give a more realistic description of the positions of the setae. On the larval body, the pairs of setae have the following number: 9 on the head, 12 on the prothorax, 8 on the meso- and metathorax, 6 on the first to eighth abdominal segments, and 8 on the ninth abdominal segment

External Morphology of the Immature Stages of Metacuterebra apicalis

The second and third instar larvae, and the pupa of Metacuterebra apicalis (Guérin-Menevilli), are described based on light and scanning electron microscope observations

Preparació de puntes de tungstè per a microscòpia d'efecte túnel (STM)

Es presenten els resultats experimentals obtinguts durant l’estudi sistemàtic realitzat de la preparació electroquímica de puntes de tungstè per al Microscopi d’Efecte Túnel (STM), fent servir dos electròlits: KOH i NaOH. L’estudi sobre la morfologia, longitud de la punta i radi de curvatura de la punta en funció del voltatge aplicat i les concentracions de l’electròlit es descriu al capítol 3. La caracterització de les puntes es va dur a terme, per una part, mitjançant un microscòpic electrònic de rastreig (SEM) i per l’altre banda, amb el ús de les puntes obtingudes al STM. En resumen, els resultats mostren que ambdós electròlits permeten obtenir puntes que es poden fer servir amb èxit per l’obtenció d’imatges amb l’STM. Les millors puntes són aquelles que s’obtenen dins de rangs de concentracions d’electròlit baixes, entre valor de 10 a 15% en pes pel NaOH i entre 10 i 20% pel KOH i rangs de voltatge entre 3 a 7 V pel NaOH i 4 a 8 V pel KOH. S’observa que es requereixen temps d’atac electroquímic menors fent servir com a electròlit NaOH. S’estudia, en el capítol 4, el tractament que requereix la punta per tal d’eliminar les impureses de la seva superfície. Es realitzen diferents proves amb tres mètodes de neteja: (1) tractament químic, (2) bombardeig iònic i (3) tractament tèrmic de recuit. En el capítol 5 del projecte s’analitzen les imatges d’una mostra d’or, Au(110), d’estructura coneguda, amb el microscopi d’efecte túnel STM) del laboratori fent servir les puntes obtingudes sota les condicions considerades òptimes. El resultat confirma el bon comportament de les puntes obtingudes sota les condicions descrites en els capítols anteriors i establert una pauta a seguir per obtenir puntes d’una manera senzilla i reproduïble.