Dynamics of sweeping through an instability: Passage-time statistics for colored noise

A calculation of passage-time statistics is reported for the laser switch-on problem, under the influence of colored noise, when the net gain is continuously swept from below to above threshold. Cases of fast and slow sweeping are considered. In the weak-noise limit, asymptotic results are given for small and large correlation times of the noise. The mean first passage time increases with the correlation time of the noise. This effect is more important for fast sweeping than for slow sweeping.

Mana / Paul Gad [acc. mandolines et p]. Stone affro tis thallassass : yalo… yalo… / Paul Gad, chant [acc. choeur et instr.]

[Traditions. Europe. Grèce]

Experimental Macadam Stone Base Des Moines County, HR-175, Construction Report, 1977

In today's era of advanced methods, it is interesting that a centuries-old Roman road-building concept can be the most attractive alternative available. The need for a less expensive road base construction method is very apparent, especially to the county engineer faced with maintaining quality lower traffic volume farm-to-market roads. The revival of the Macadam stone base is one possible solution. Des Moines County believed a Macadam road had excellent possibilities for their particular needs. They proposed a research project designed to eliminate some of the unknown factors of Macadam stone base construction. It is the intent of this research project to develop standardized design procedures and serve as an aid for others in constructing a Macadam base roadway. The Iowa Department of Transportation has published special provisions for the construction of Macadam stone bases that were adopted as the guideline specifications for the research project.

Reinforced Earth and Stone Columns for Weak Subsoil Conditions, HR-510, 1980

Reinforced Earth is a French development that has been used in the United States for approximately ten years. Virbro-Replacement, more commonly referred to as stone columns, is an outgrowth of deep densification of cohesionless soils originally developed in Germany. Reinforced Earth has applicability when wall height is greater than about twelve feet and deep seated foundation failure is not a concern. Stone columns are applicable when soft, cohesive subsoil conditions are encountered and bearing capacity and shearing resistance must be increased. The conditions in Sioux City on Wesley Way can be summarized as: (1) restricted right of way, (2) fill height in excess of 25 feet creating unstable conditions, (3) adjacent structures that could not be removed. After analyzing alternatives, it was decided that Reinforced Earth walls constructed on top of stone columns were the most practical approach.

Evaluation de deux structures à bas seuil de la ville de Lausanne : Le Passage et le Point d'eau

[Table des matières] 1. Méthodes d'évaluation. 2. Le Passage et le Point d'eau. 2.1. Historique et objectifs. 2.2. Etapes de la mise en route. 3.1. Professionnels salariés. 3.2. Bénévoles professionnels. 3.3. Bénévoles d'accueil. 4.1. Activités de la structure. 4.2. Accueil (animations, repas, collations). 4.3. L'offre socio-éducative. 4.4. L'offre sanitaire. 4.5. La distribution du matériel stérile. 5.1. Prestations d'hygiène. 5.2. Soins somatiques. 5.3. Activité sportive. 6.1. Profil des usagers. 6.2. Indicateurs socio-démographiques et d'intégration sociale. 6.3. Etat de santé perçu. 6.4. Fréquentation du réseau (dispositif bas seuil et autre) et de Point d'eau. 7. Consommation de drogues illégales. 8. Fréquentation de la structure. 9.1. Méthodes d'évaluation utilisées. 9.2. Evaluation du Passage et du Point d'eau.

Fish passage assessment at the most downstream barrier of the Ebro River (NE Iberian Peninsula)

Fish passage at artificial barriers is necessary for the conservation of healthy fish stocks. The first barrier that migratory fish encounter when ascending the Ebro River is the Xerta Weir, where a pool-type fishway was constructed in 2008. From 2007 to 2010, boat electrofishing surveys were conducted in the Ebro River downstream of the Xerta Weir to assess the potential pool of species that could use the fishway. Nine native and 12 exotic species were captured, the latter comprising 62 % of the relative abundance and 70 % of the biomass. A combination of video recording, electrofishing and trapping was used to assess the effectiveness of the fishway in facilitating the passage of fish. Eight species were detected using the fishway, of which five were native (Liza ramada, Anguilla anguilla, Barbus graellsii, Gobio lozanoi and Salaria fluviatilis) and three exotic (Alburnus alburnus, Cyprinus carpio and Rutilus rutilus). Only L. ramada used the fishway in substantial numbers. The rate of fish passage was the highest from June to August and decreased afterwards. The effectiveness of the fishway might be lowered by areas of turbulence within the fishway and by distraction flows from a nearby hydropower station

El marmor de Tarraco. Explotació, utilització i comercialització de la pedra de Santa Tecla en època romana Tarraco marmor. The Quarrying, Use and Trade of Santa Tecla Stone in Roman Times

Aquest és el llibre més complet que hi ha sobre la pedra de Santa Tecla i el llisós, dos materials procedents de Tarragona i molt utilitzats en època romana. Els autors, arqueòlegs i geòlegs, caracteritzen aquestes dues varietats i presenten el panorama de les seves aplicacions, i també donen pautes per identificar-les i diferenciar-les d’altres pedres que s’hi podrien confondre, com la “portasanta” o la pedra de Buixcarró.

Crushed Stone Granular Surfacing Materials, HR-2046 and MLR-90-07, 1990

This project included the following tasks: (1) Preparation of a questionnaire and survey of all 99 Iowa county engineers for input on current surfacing material practice; (2) County survey data analysis and selection of surfacing materials gradations to be used for test road construction; (3) Solicitation of county engineers and stone producers for project participation; (4) Field inspection and selection of the test road; (5) Construction of test road using varying material gradations from a single source; and (6) Field and laboratory testing and test road monitoring. The results of this research project indicate that crushed stone surfacing material graded on the fine side of Iowa Department of Transportation Class A surfacing specifications provides lower roughness and better rideability; better braking and handling characteristics; and less dust generation than the coarser gradations. It is believed that this material has sufficient fines available to act as a binder for the coarser material, which in turn promotes the formation of tight surface crust. This crust acts to provide a smooth riding surface, reduces dust generation, and improves vehicle braking and handling characteristics.

First-passage and escape problems in the Feller process

The Feller process is an one-dimensional diffusion process with linear drift and state-dependent diffusion coefficient vanishing at the origin. The process is positive definite and it is this property along with its linear character that have made Feller process a convenient candidate for the modeling of a number of phenomena ranging from single-neuron firing to volatility of financial assets. While general properties of the process have long been well known, less known are properties related to level crossing such as the first-passage and the escape problems. In this work we thoroughly address these questions.

[Défilé du 14 juillet 1919, passage de poilus portant l'étendard des bataillons des douanes devant le cénotaphe place de l'Etoile] : [photographie de presse] / [Agence Rol]

Référence bibliographique : Rol, 54927

Mineralogical alteration of artificial meteorites during atmospheric entry. The STONE-5 experiment

The generic concept of the artificial meteorite experiment STONE is to fix rock samples bearing microorganisms on the heat shield of a recoverable space capsule and to study their modifications during atmospheric re-entry. The STONE-5 experiment was performed mainly to answer astrobiological questions. The rock samples mounted on the heat shield were used (i) as a carrier for microorganisms and (ii) as internal control to verify whether physical conditions during atmospheric re-entry were comparable to those experienced by "real" meteorites. Samples of dolerite (an igneous rock), sandstone (a sedimentary rock), and gneiss impactite from Haughton Crater carrying endolithic cyanobacteria were fixed to the heat shield of the unmanned recoverable capsule FOTON-M2. Holes drilled on the back side of each rock sample were loaded with bacterial and fungal spores and with dried vegetative cryptoendoliths. The front of the gneissic sample was also soaked with cryptoendoliths. <p>The mineralogical differences between pre- and post-flight samples are detailed. Despite intense ablation resulting in deeply eroded samples, all rocks in part survived atmospheric re-entry. Temperatures attained during re-entry were high enough to melt dolerite, silica, and the gneiss impactite sample. The formation of fusion crusts in STONE-5 was a real novelty and strengthens the link with real meteorites. The exposed part of the dolerite is covered by a fusion crust consisting of silicate glass formed from the rock sample with an admixture of holder material (silica). Compositionally, the fusion crust varies from silica-rich areas (undissolved silica fibres of the holder material) to areas whose composition is "basaltic". Likewise, the fusion crust on the exposed gneiss surface was formed from gneiss with an admixture of holder material. The corresponding composition of the fusion crust varies from silica-rich areas to areas with "gneiss" composition (main component potassium-rich feldspar). The sandstone sample was retrieved intact and did not develop a fusion crust. Thermal decomposition of the calcite matrix followed by disintegration and liberation of the silicate grains prevented the formation of a melt.</p> <p>Furthermore, the non-exposed surface of all samples experienced strong thermal alterations. Hot gases released during ablation pervaded the empty space between sample and sample holder leading to intense local heating. The intense heating below the protective sample holder led to surface melting of the dolerite rock and to the formation of calcium-silicate rims on quartz grains in the sandstone sample. (c) 2008 Elsevier Ltd. All rights reserved.</p>