Teste de condutividade elétrica para avaliação da qualidade fisiológica de sementes Sebastiania commersoniana (Bail) Smith & Downs - Euphorbiaceae

O teste de condutividade elétrica tem sido excelente ferramenta para avaliar a qualidade de sementes de diversas espécies e, mais recentemente, estudos têm sido conduzidos visando verificar sua aplicabilidade em sementes florestais. Assim este trabalho objetivou estabelecer metodologia específica do teste de condutividade elétrica para sementes de branquilho. Foram usados três lotes de sementes resultantes do armazenamento em embalagens de vidro (Lote I), pano (Lote II) e papel (Lote III), em câmara fria (10ºC e 60% UR), por cinco meses, os quais foram submetidos ao teste de germinação, avaliando-se a porcentagem e o índice de velocidade de germinação. No teste de condutividade elétrica foram estudadas três quantidades de sementes por repetição (25, 50 e 75 sementes), três volumes de água deionizada (50, 75 e 100mL) e 11 tempos de embebição das sementes (2, 4, 6, 12, 18, 24, 30, 36, 42, 48 e 72h), a 25ºC. O lote I apresentou maior porcentagem e velocidade de germinação. O teste de condutividade elétrica possibilitou a mesma discriminação dos lotes que o teste de germinação, em combinações variadas dos fatores estudados. Foi possível separar o lote de melhor qualidade fisiológica (Lote I) dos demais lotes, já a partir de 2 horas de embebição, utilizando-se amostras de 75 sementes embebidas em 50, 75 ou 100mL de água; ou amostras de 50 sementes embebidas em 50mL de água, a partir de 18 horas de embebição. Desta forma, pode-se recomendar o uso de 75 sementes, embebidas em 75mL de água, por 24 horas à temperatura de 25ºC, para a condução do teste de condutividade elétrica.

Efeitos da escarificação química e da concentração de nitrogênio sobre a germinação e o desenvolvimento in vitro de Vanilla planifolia Jack ex Andr. (Orchidaceae: Vanilloideae)

Vanilla planifolia é uma espécie com grande valor comercial, porém sua propagação é dificultada devido à baixa germinação de suas sementes. No presente estudo procurou-se avaliar a influência da escarificação destas sementes por meio da imersão em H2SO4 concentrado durante 60, 120 e 180 segundos, bem como de diferentes concentrações de nitrogênio sobre a germinação e o desenvolvimento das plântulas. Sessenta segundos de escarificação e 25% de nitrogênio no meio de cultura proporcionaram os melhores resultados sobre a germinação e desenvolvimento de V. planifolia, constituindo-se em um procedimento viável para a produção comercial dessa espécie.

Adequação do teste de condutividade elétrica para sementes de Pisum sativum subsp. Arvense

A qualidade da semente na produção agrícola é um dos principais fatores a ser considerado na implantação da cultura, de forma que se torna importante a obtenção de informações sobre a germinação e o vigor das sementes, além da necessidade de avaliá-los. Dentro desse contexto, este trabalho teve como objetivo adequar a metodologia do teste de condutividade elétrica para a avaliação da qualidade fisiológica de sementes de Pisum sativum subsp. arvense. Para tanto, foram utilizados dez lotes de sementes da cultivar IAPAR 83, empregando-se períodos de condicionamento de 8, 16, 20, 24 e 28 horas, combinados às temperaturas de 20 e 25°C e volumes de 75 e 250mL de água. Além destes, foram conduzidos os testes de germinação, primeira contagem de germinação e emergência de plântulas. Para ambas as avaliações, foram utilizadas quatro repetições de 50 sementes. Os testes de vigor, assim como o teste de germinação foram sensíveis para avaliar a qualidade das sementes dos diferentes lotes estudados, porém houve variações na ordenação deles quanto ao vigor. O volume de água, o tempo e a temperatura de embebição influenciaram os valores de condutividade elétrica. Concluiu-se que o teste de condutividade elétrica utilizando 250mL de água, na temperatura de 25°C por 24 horas é promissor para a diferenciação de lotes de sementes de P. sativum subsp. arvense.

Conservação pós-colheita de figos verdes (Ficus carica L.) cv. roxo de Valinhos tratados com hipoclorito de sódio e armazenados sob refrigeração em atmosfera modificada passiva

Os principais causadores de perdas da qualidade de figos são: colheita e embalagens inadequadas, falta de padronização do produto na classificação e péssimas condições de transporte e armazenamento. Com este trabalho objetivou-se avaliar o efeito da imersão em hipoclorito, tipo de embalagem e refrigeração na conservação pós-colheita de figos verdes, cv. Roxo de Valinhos, mediante as características físicas, físico-químicas e químicas, durante o armazenamento. Após seleção, os figos foram imersos ou não em solução de hipoclorito de sódio a 40 ppm conforme os tratamentos, secos ao ar e embalados em filme de PVC de 50 m ou sacos plásticos. Após os tratamentos, os frutos foram submetidos a armazenamento refrigerado (1ºC e 70% de UR em BOD), por um período de 35 dias, sendo avaliados a cada 7 dias. O uso da embalagem reduziu drasticamente a perda de massa dos figos. Frutos não embalados apresentaram-se mais ácidos e com menores teores de açúcares. Com o uso da embalagem, os figos podem ser comercializados até os 35 dias de armazenamento desde que armazenados a 1ºC e 70% de UR em BOD. Já os figos não embalados, estes podem ser comercializados somente até os 2 dias de armazenamento sob refrigeração.

Lignin from sugar cane bagasse: Extraction, fabrication of nanostructured films, and application

Four lignin samples were extracted from sugar cane bagasse using four different alcohols (methanol, ethanol, n-propanol, and 1-butanol) via the organosolv-CO2 supercritical pulping process. Langmuir films were characterized by surface pressure vs mean molecular area (Pi-A) isotherms to exploit information at the molecular level carrying out stability tests, cycles of compression/expansion (hysteresis), subphase temperature variations, and metallic ions dissolved into the water subphase at different concentrations. Briefly, it was observed that these lignins are relatively stable on the water surface when compared to those obtained via different extraction processes. Besides, the Pi-A isotherms are shifted to smaller molecular areas at higher subphase temperatures and to larger molecular areas when the metallic ions are dissolved into the subphase. The results are related to the formation of stable aggregates (domains) onto the water subphase by these lignins, as shown in the Pi-A isotherms. It was found as well that the most stable lignin monolayer onto the water subphase is that extracted with 1-butanol. Homogeneous Langmuir-Blodgett (LB) films of this lignin could be produced as confirmed by UV-vis absorption spectroscopy and the cumulative transfer parameter. In addition, FTIR analysis showed that this lignin LB film is structured in a way that the phenyl groups are organized preferentially parallel to the substrate surface. Further, these LB films were deposited onto gold interdigitated electrodes and ITO and applied in studies involving the detection of Cd+2 ions in aqueous solutions at low concentration levels throughimpedance spectroscopy and electrochemical measurements. FTIR spectroscopy was carried out before and after soaking the thin films into Cd+2 aqueous solutions, revealing a possible physical interaction between the lignin phenyl groups and the heavy metal ions. The importance of using nanostructured systems is demonstrated as well by comparing both LB and cast films.

Anthracnose control and mango quality (Mangifera indica L.) cv. van dyke after hydrothermal and chemical treatment

Anthracnose causes severe damage to the mango skin. Therefore, there is need to do the post-harvest phytosanitary treatment of the fruits through soaking in fungicide solution, which associated with the hydrothermal treatment has resulted into improved benefits. The present work has aimed at studying anthracnose control and post-harvest quality of mangoes (Mangifera indica L.), cv. Van Dyke after hydrothermal treatment associated with chemical through the physical, physicochemical, chemical and phytopathologic analyses. The mangoes coming from the commercial orchard of the town of Jana ba-MG, of the 2000 crop, were harvested at the commercial maturation stage. After selection according to color uniformity, size and absence of mechanic and physiologic injuries, they were shipped in plastic boxes to the EPAMIG - CTNM - Nova Porteirinha - MG, fruit post-harvest laboratory, where the samples were submitted to the hydrothermal treatment in cold bath in solution containing the fungicides Thiabendazole (Tecto 400 mL/100L), Proclaraz (Sportak 10L/100L) and Imazalil (Magnate 200mL/100L). After air-drying, the fruits were packed in plastic trays and stored at room temperature (25 +/- 2 degrees C and RH 70%) for a 12-day period and evaluated as to the intrinsic quality characteristics every 4 days. The experiment was conducted a completely randomized with 8 treatments, 4 replicates and experimental unit consisting of 4 fruits. The variations of pH, total soluble solids, total titrable acidity and total soluble sugars have not endangered the organoleptic characteristics of mangoes cv. Van Dyke stored under room temperature (25 +/- 2 degrees C and RH 70%) till 8 days' storage. The association of the hydrothermal treatment with the chemical was efficient in fruit anthracnose control for till 12 days' storage. The fungicide Prochloraz (Sportak 110 mL/100L), associated with the hydrothermal treatment, completely inhibited the appearance of anthracnose symptoms.

Electrical conductivity of soybean seed and correlation with seed coat lignin content

The effects of soybean genotype and seed coat lignin content on bulk electrical conductivity were investigated. Seeds of nine soybean cultivars were hand harvested at R8 maturation stage in Londrina, PR., Brazil in 1995/96. Seeds were electrical conductivity tested using four replicates of 50 seeds per cultivar soaked in 75 mi of deionized water at 25 degrees C for 24 hours. Seed coat lignin content was determined using the potassium permanganate method. There was a significant relationship (R-2 = 0.84**) between electrical conductivity and seed coat lignin content, the latter being a characteristic that varies among soybean genotypes; the higher the amount of lignin in the seed coat, the lower the levels of seed exudates to the soaking solution and consequently the lower the electrical conductivity. It was concluded that seed soaking electrical conductivity is influenced by the seed coat lignin content, which is a characteristic that varies among soybean genotypes. Additionally, the EC test can be used as a valuable tool in the screening process for this characteristic, which is desirable for genetically improving soybean seed quality.

Study of superficial properties of titanium treated by PIIID

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação de dois métodos de extração de Xanthomonas campestris pv. phaseoli em sementes de feijoeiro

The objective of this research was to evaluate the effectiveness of the extraction of Xanthomonas campestris pv. phaseoli from naturally infected dry bean seeds. Extraction methods tested included soaking whole seeds in sterilized saline phosphate buffer and crushing seeds after soaking in sterilized saline phosphate buffer. The bacterium was isolated on a semiselective agar medium. The seed crushing method was found to be more effective. The bacterium strains isolated were pathogenic to bean leaves, reacted with X. campestris pv. phaseoli antiserum, and had morphological and physiological/biochemical characteristics typical of the X. campestris pv. phaseoli.

Maize germ recovery and quality using the intermittent milling and dynamic steeping process

The intermittent milling and dynamic steeping (IMDS) process is an alternative method developed for wet milling of maize. In this process, the steeping stage can be reduced to 5 h by soaking maize in water at 60°C for 2 h and cracking the kernels to remove solution components diffusional barriers with minimum germ damage. Maize was dynamically steeped in solutions with 0.0, 0.1, and 0.2% sulphur dioxide (SO2) and 0.00, 0.55% lactic acid. Germ recovery, germ damage, fibre in germ, oil content and uncracked kernels were determined. A conventional steeping procedure was also performed. Germ recovery was higher for all tests using both SO2 and lactic acid than for the others with best germ yield for concentrations of 0.2% SO2 and 0.55% lactic acid. Germ damage ranged from 7.4 to 18.2% for all tests. The presence of lactic acid in the steeping solution decreased the amount of fibre in germ fraction. Germ oil content ranged from 39.3% (0-0% SO2, 0.55% lactic acid) to 44.0% (0.2% SO2, 0.55% lactic acid) for all treatments using IMDS. The smallest difference was 5.5% between IMDS (0.2% SO2, 0.55% lactic acid) and the conventional 36 h steeping process. An average of 1.3% of kernels remained uncracked after IMDS process. © 2002 Silsoe Research Institute. Published by Elsevier Science Ltd. All rights reserved.

Viabilidade de sementes de Piptadenia moniliformis Benth. Pelo teste de tetrazólio

Piptadenia moniliformis Benth. is a tree species which is important for beekeeping, as well as being recommended for soil restoration, reforestation, wood production for small civil construction projects, and cattle and sheep forage. Information on how to evaluate seed physiological quality is still scarce and in this was the study aimed to adapt the procedures of the tetrazolium test to assess the viability of P. moniliformis seeds. Four seed lots were scarified in sulphuric acid for 30 min, and soaked between paper towels at 25 °C for 24 hours. The seed coat was then removed and the naked seeds immersed in tetrazolium solutions with concentrations of 0.05, 0.075 and 0.1% for 2, 3, and 4 hours at 35 oC in the dark. Each treatment consisted of four replications of 25 seeds. The embryos were classified according to viability based on the staining patterns. The previous soaking of the seeds for 24 hours at 25 oC between paper towels, followed by the removal of the seed coat and staining of the naked seeds for 4 hours in a 0.075% tetrazolium solution at 35 oC was the most efficient method for evaluating the viability of P. moniliformis Benth seeds.

Própolis no controle da mastite bovina

Bovine mastitis is considered the main disease causing great economic losses in dairy herds. It is usually treated by antimicrobial chemicals that promote drug resistance, residues in food and environmental contamination. However, consumers in different countries requires more natural foods and with higher quality. Thus, the objective was to check the activities of propolis in controlling bovine mastitis. Seventy-two Holstein cows were used. The mastitis was identified by the California Mastitis Test, somatic cell counts and microbiological examination of milk. Four treatments were held: in group EAP1 10ml of a 30% alcoholic propolis extract (EAP) were given orally for seven consecutive days; in group EAP2 the same procedure described for the first group was used, in addition EAP was used for immersion of the teats before and after milking; in group CA alcohol was used for immersion of the teats before and after milking; and in group CT animals were subjected to soaking and disinfection, procedures routinely used by the property. The results were analyzed by the non-parametric variance model for repeated measures complemented by independent groups in multiple comparisons. There was a decrease of the somatic cell count in all groups. The biological activities of propolis provide great prospects; however, under the conditions evaluated, it was not possible to observe differences between treatments. The great diversity in its chemical composition and the complexity of multiple synergistic mechanisms involved in its biological activity require additional clinical trials.

Analysis of the bioactive surface of Ti-35Nb-7Zr alloy after alkaline treatment and solution body fluid

The purpose of this work was to evaluate the Ti-35Nb-7Zr experimental alloy after surface treatment and soaking in solution body fluid (SBF) to form bonelike apatite. The Ti-35Nb-7Zr alloy was produced from commercially pure materials (Ti, Nb and Zr) by an arc melting furnace. All ingots were submitted to sequences of heat treatment (1100 °C/2 h and water quenching), cold working by swaging procedures and heat treatment (1100 °C/2 h and water quenching). Discs with 13 mm diameter and 3 mm in thickness were cut. The samples were immersed in NaOH aqueous solution with 5 M at 60 °C for 72 h, washed with distilled water and dried at 40 °C for 24 h. After the alkaline treatment, samples were heat treated in both conditions: at 450 and 600 °C for 1 h in an electrical furnace in air. Then, they were soaking in SBF for 24 h to form an apatite layer on the surface. The surfaces were investigated by using scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX), infrared spectroscopy (FTIR) and contact angle measurements. The results indicate that calcium phosphate could form on surface of Ti-35Nb-7Zr experimental alloy. © Springer-Verlag Berlin Heidelberg 2013.

Teste de submersão em água para avaliação do vigor de sementes de milho

Pós-graduação em Agronomia (Agricultura) - FCA

Estudos estruturais da Purina Nucleosídeo Fosforilase do Mycobacterium tuberculosis complexada com ligantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)