Denver Water, Policy and Economics

An analysis of the Denver Water Department finds that it is charged with supplying water to over 1.1 million residents in the Denver Metropolitan area. With assets of over $1.2 billion dollars and a governing board of five appointed members who must make policy and financial decisions under unusual circumstances for most water districts. Those circumstances include; Colorado is the only State that has a single source of water, precipitation, State and Federal mandated water compacts that limits water resources further, and Colorado Constitutional mandated appropriation water laws. Combined together these circumstances create a difficult atmosphere for policy making and financial planning. When comparing the Denver Water Board with other water departments around the Country, the Denver Water Department seems to be competent in all areas.

Monumens de l'histoire de France, en estampes et dessins ...

The present 30 volumes seem to have remained with the Dukes of Leuchtenberg, until the ducal library was acquired for sale in 1935 by the dealers Ulrich Hoepli (Milan) and Braus-Riggenbach (Basel). The volumes are not complete, as leaves have been wholly or partly removed throughout; this is particularly evident in preliminary volumes 2 and 10 and volume 75. Prints and the relatively small number of drawings are mostly French, with some German, Dutch and English, and are mostly of the 17th or 18th centuries. They are mounted generally on rectos of leaves, often with hand-written captions. Large prints are occasionally bound in directly; these are often folded. The engraved general title page (bearing the date 1788) appears at the beginning of each volume; below the printed title a hand-written volume number and brief title describing the volume's contents usually appear. In many volumes the title leaf is followed by a hand-written contents leaf listing the section titles, which are also written individually throughout the volume on leaves with etched decorative frames. Sections are numbered continuously throughout the work as a whole. Numbering of the leaves, when present, appears in black ink within each volume at top center recto. Printmakers include B. & J. Audran, Francesco Bartolozzi, Abraham Bosse, Stefano della Bella, Jacques Callot, François Chéreau, Wenceslaus Hollar, Romeyn de Hooghe, Raymond La Fage, Sébastien Le Clerc, Pierre Lepautre, Claude Mellan, Bernard Picart, and Simon Thomassin. There are also early color prints by Gautier-Dagoty and Jean-Baptiste Morret.

Traffic safety facts 2003: a compilation of motor vehicle crash data from the Fatality Analysis Reporting System and the General Estimates System.

Both systems were designed and developed by NHTSA's National Center for Statistics and Analysis (NCSA) to provide an overall measure of highway safety, to help identify traffic safety problems, to suggest solutions, and to help provide an objective basis on which to evaluate the effectiveness of motor vehicle safety standards and highway safety initiatives. Data from these systems are used to answer requests for information from the international and national highway traffic safety communities, including state and local governments, the Congress, Federal agencies, research organizations, industry, the media, and private citizens.

The provenance and technology of Near Eastern glass: Oxygen isotopes by laser fluorination as a complement to strontium

The ability to make rapid measurements on small samples using laser fluorination enhances the potential of oxygen isotopes in the investigation of early inorganic materials and technologies. delta O-18 and Sr-87/Sr-86 values are presented for glass from two primary production sites, four secondary production sites and a consumer site in the Near East, dating from Late Antiquity to the medieval period. delta O-18 is in general slightly less effective than Sr-87/Sr-86 in discriminating between sources, as the spread of measured values from a single source is somewhat broader relative to the available range. However, while Sr-87/Sr-86 is derived predominantly from either the lime-bearing fraction of the glass-making sand or the plant ash used as a source of alkali, delta O-18 derives mainly from the silica. Thus the two measurements can provide complementary information. A comparison of delta O-18 for late Roman - Islamic glasses made on the coast of Syria-Palestine with those of previously analysed glasses from Roman Europe suggests that the European glasses are relatively enriched in O-18. This appears to contradict the view that most Roman glass was made using Levantine sand and possible interpretations are discussed.

An evaluation of the epidemiology of medication discrepancies and clinical significance of medicines reconciliation in children admitted to hospital

Aims: To determine the incidence of unintended medication discrepancies in paediatric patients at the time of hospital admission; evaluate the process of medicines reconciliation; assess the benefit of medicines reconciliation in preventing clinical harm. Method: A 5 month prospective multisite study. Pharmacists at four English hospitals conducted admission medicines reconciliation in children using a standardised data collection form. A discrepancy was defined as a difference between the patient's preadmission medication (PAM), compared with the initial admission medication orders written by the hospital doctor. The discrepancies were classified into intentional and unintentional discrepancies. The unintentional discrepancies were assessed for potential clinical harm by a team of healthcare professionals, which included doctors, pharmacists and nurses. Results: Medicines reconciliation was conducted in 244 children admitted to hospital. 45% (109/244) of the children had at least one unintentional medication discrepancy between the PAM and admission medication order. The overall results indicated that 32% (78/244) of patients had at least one clinically significant unintentional medication discrepancy with potential to cause moderate 20% (50/244) or severe 11% (28/244) harm. No single source of information provided all the relevant details of a patient's medication history. Parents/carers provided the most accurate details of a patient's medication history in 81% of cases. Conclusions: This study demonstrates that in the absence of medicines reconciliation, children admitted to hospitals across England are at risk of harm from unintended medication discrepancies at the transition of care from the community to hospital. No single source of information provided a reliable medication history.

Editorial

This second issue of Knowledge Management Research & Practice (KMRP) continues the international nature of the first issue, with papers from authors based on four different continents. There are five regular papers, plus the first of what is intended to be an occasional series of 'position papers' from respected figures in the knowledge management field, who have specific issues they wish to raise from a personal standpoint. The first two regular papers are both based on case studies. The first is 'Aggressively pursuing knowledge management over two years: a case study a US government organization' by Jay Liebowitz. Liebowitz is well known to both academics and practictioners as an author on knowledge management and knowledge based systems. Government departments in many Western countries must soon face up to the problems that will occur as the 'baby boomer' generation reaches retirement age over the next decade. This paper describes how one particular US government organization has attempted to address this situation (and others) through the introduction of a knowledge management initiative. The second case study paper is 'Knowledge creation through the synthesizing capability of networked strategic communities: case study on new product development in Japan' by Mitsuru Kodama. This paper looks at the importance of strategic communities - communities that have strategic relevance and support - in knowledge management. Here, the case study organization is Nippon Telegraph and Telephone Corporation (NTT), a Japanese telecommunication firm. The third paper is 'Knowledge management and intellectual capital: an empirical examination of current practice in Australia' by Albert Zhou and Dieter Fink. This paper reports the results of a survey carried out in 2001, exploring the practices relating to knowledge management and intellectual capital in Australia and the relationship between them. The remaining two regular papers are conceptual in nature. The fourth is 'The enterprise knowledge dictionary' by Stuart Galup, Ronald Dattero and Richard Hicks. Galup, Dattero and Hicks propose the concept of an enterprise knowledge dictionary and its associated knowledge management system architecture as offering the appropriate form of information technology to support various different types of knowledge sources, while behaving as a single source from the user's viewpoint. The fifth and final regular paper is 'Community of practice and metacapabilities' by Geri Furlong and Leslie Johnson. This paper looks at the role of communities of practice in learning in organizations. Its emphasis is on metacapabilities - the properties required to learn, develop and apply skills. This discussion takes work on learning and core competences to a higher level. Finally, this issue includes a position paper 'Innovation as an objective of knowledge management. Part I: the landscape of management' by Dave Snowden. Snowden has been highly visible in the knowledge management community thanks to his role as the Director of IBM Global Services' Canolfan Cynefin Centre. He has helped many government and private sector organizations to consider their knowledge management problems and strategies. This, the first of two-part paper, is inspired by the notion of complexity. In it, Snowden calls for what he sees as a 20th century emphasis on designed systems for knowledge management to be consigned to history, and replaced by a 21st century emphasis on emergence. Letters to the editor on this, or any other topic related to knowledge management research and practice, are welcome. We trust that you will find the contributions stimulating, and again invite you to contribute your own paper(s) to future issues of KMRP.

Extended range interferometry using a coherence tuned synthesised dual wavelength technique with multimode fibres

We describe in the letter a technique for making extended-range interferometric measurements with a coherence multiplexed system by means of a variation on the dual-wavelength technique. The interferometer is illuminated with a single source and the two wavelengths are synthesised at the output by means of an interference filter.

Network lifetime maximization with cross-layer design in wireless sensor networks

This paper investigates a cross-layer design approach for minimizing energy consumption and maximizing network lifetime (NL) of a multiple-source and single-sink (MSSS) WSN with energy constraints. The optimization problem for MSSS WSN can be formulated as a mixed integer convex optimization problem with the adoption of time division multiple access (TDMA) in medium access control (MAC) layer, and it becomes a convex problem by relaxing the integer constraint on time slots. Impacts of data rate, link access and routing are jointly taken into account in the optimization problem formulation. Both linear and planar network topologies are considered for NL maximization (NLM). With linear MSSS and planar single-source and single-sink (SSSS) topologies, we successfully use Karush-Kuhn-Tucker (KKT) optimality conditions to derive analytical expressions of the optimal NL when all nodes are exhausted simultaneously. The problem for planar MSSS topology is more complicated, and a decomposition and combination (D&C) approach is proposed to compute suboptimal solutions. An analytical expression of the suboptimal NL is derived for a small scale planar network. To deal with larger scale planar network, an iterative algorithm is proposed for the D&C approach. Numerical results show that the upper-bounds of the network lifetime obtained by our proposed optimization models are tight. Important insights into the NL and benefits of cross-layer design for WSN NLM are obtained.

Control of second-life hybrid battery energy storage system based on modular boost-multilevel buck converter

To fully utilize second-life batteries on the grid system, a hybrid battery scheme needs to be considered for several reasons: the uncertainty over using a single source supply chain for second-life batteries, the differences in evolving battery chemistry and battery configuration by different suppliers to strive for greater power levels, and the uncertainty of degradation within a second-life battery. Therefore, these hybrid battery systems could have widely different module voltage, capacity, and initial state of charge and state of health. In order to suitably integrate and control these widely different batteries, a suitable multimodular converter topology and an associated control structure are required. This paper addresses these issues proposing a modular boost-multilevel buck converter based topology to integrate these hybrid second-life batteries to a grid-tie inverter. Thereafter, a suitable module-based distributed control architecture is introduced to independently utilize each converter module according to its characteristics. The proposed converter and control architecture are found to be flexible enough to integrate widely different batteries to an inverter dc link. Modeling, analysis, and experimental validation are performed on a single-phase modular hybrid battery energy storage system prototype to understand the operation of the control strategy with different hybrid battery configurations.

Knowledge discovery using multiple sources of biological data

The primary aim of this dissertation is to develop data mining tools for knowledge discovery in biomedical data when multiple (homogeneous or heterogeneous) sources of data are available. The central hypothesis is that, when information from multiple sources of data are used appropriately and effectively, knowledge discovery can be better achieved than what is possible from only a single source. ^ Recent advances in high-throughput technology have enabled biomedical researchers to generate large volumes of diverse types of data on a genome-wide scale. These data include DNA sequences, gene expression measurements, and much more; they provide the motivation for building analysis tools to elucidate the modular organization of the cell. The challenges include efficiently and accurately extracting information from the multiple data sources; representing the information effectively, developing analytical tools, and interpreting the results in the context of the domain. ^ The first part considers the application of feature-level integration to design classifiers that discriminate between soil types. The machine learning tools, SVM and KNN, were used to successfully distinguish between several soil samples. ^ The second part considers clustering using multiple heterogeneous data sources. The resulting Multi-Source Clustering (MSC) algorithm was shown to have a better performance than clustering methods that use only a single data source or a simple feature-level integration of heterogeneous data sources. ^ The third part proposes a new approach to effectively incorporate incomplete data into clustering analysis. Adapted from K-means algorithm, the Generalized Constrained Clustering (GCC) algorithm makes use of incomplete data in the form of constraints to perform exploratory analysis. Novel approaches for extracting constraints were proposed. For sufficiently large constraint sets, the GCC algorithm outperformed the MSC algorithm. ^ The last part considers the problem of providing a theme-specific environment for mining multi-source biomedical data. The database called PlasmoTFBM, focusing on gene regulation of Plasmodium falciparum, contains diverse information and has a simple interface to allow biologists to explore the data. It provided a framework for comparing different analytical tools for predicting regulatory elements and for designing useful data mining tools. ^ The conclusion is that the experiments reported in this dissertation strongly support the central hypothesis.^

Evaluation of the evidential value of the elemental composition of glass, ink and paper by laser-based microspectrochemical methods

Elemental analysis can become an important piece of evidence to assist the solution of a case. The work presented in this dissertation aims to evaluate the evidential value of the elemental composition of three particular matrices: ink, paper and glass. In the first part of this study, the analytical performance of LIBS and LA-ICP-MS methods was evaluated for paper, writing inks and printing inks. A total of 350 ink specimens were examined including black and blue gel inks, ballpoint inks, inkjets and toners originating from several manufacturing sources and/or batches. The paper collection set consisted of over 200 paper specimens originating from 20 different paper sources produced by 10 different plants. Micro-homogeneity studies show smaller variation of elemental compositions within a single source (i.e., sheet, pen or cartridge) than the observed variation between different sources (i.e., brands, types, batches). Significant and detectable differences in the elemental profile of the inks and paper were observed between samples originating from different sources (discrimination of 87–100% of samples, depending on the sample set under investigation and the method applied). These results support the use of elemental analysis, using LA-ICP-MS and LIBS, for the examination of documents and provide additional discrimination to the currently used techniques in document examination. In the second part of this study, a direct comparison between four analytical methods (µ-XRF, solution-ICP-MS, LA-ICP-MS and LIBS) was conducted for glass analyses using interlaboratory studies. The data provided by 21 participants were used to assess the performance of the analytical methods in associating glass samples from the same source and differentiating different sources, as well as the use of different match criteria (confidence interval (±6s, ±5s, ±4s, ±3s, ±2s), modified confidence interval, t-test (sequential univariate, p=0.05 and p=0.01), t-test with Bonferroni correction (for multivariate comparisons), range overlap, and Hotelling's T2 tests. Error rates (Type 1 and Type 2) are reported for the use of each of these match criteria and depend on the heterogeneity of the glass sources, the repeatability between analytical measurements, and the number of elements that were measured. The study provided recommendations for analytical performance-based parameters for µ-XRF and LA-ICP-MS as well as the best performing match criteria for both analytical techniques, which can be applied now by forensic glass examiners.

Magnetic extracts of three gravity cores located at the Ceará Rise, the Mid-Atlantic Ridge and the Sierra Leone Rise

The magnetic microparticle and nanoparticle inventories of marine sediments from equatorial Atlantic sites were investigated by scanning and transmission electron microscopy to classify all present detrital and authigenic magnetic mineral species and to investigate their regional distribution, origin, transport, and preservation. This information is used to establish source-to-sink relations and to constrain environmental magnetic proxy interpretations for this area. Magnetic extracts were prepared from sediments of three supralysoclinal open ocean gravity cores located at the Ceará Rise (GeoB 1523-1; 3°49.9'N/41°37.3'W), the Mid-Atlantic Ridge (GeoB 4313-2; 4°02.8'N/33°26.3'W), and the Sierra Leone Rise (GeoB 2910-1; 4°50.7'N/21°03.2'W). Sediments from two depths corresponding to marine isotope stages 4 and 5.5 were processed. This selection represents glacial and interglacial conditions of sedimentation for the western, central, and eastern equatorial Atlantic and avoids interferences from subsurface and anoxic processes. Crystallographic, elemental, morphological, and granulometric data of more than 2000 magnetic particles were collected by scanning and transmission electron microscopy. On basis of these properties, nine particle classes could be defined: detrital magnetite, titanomagnetite (fragmental and euhedral), titanomagnetite-hemoilmentite intergrowths, silicates with magnetic inclusions, microcrystalline hematite, magnetite spherules, bacterial magnetite, goethite needles, and nanoparticle clusters. Each class can be associated with fluvial, eolian, subaeric, and submarine volcanic, biogenic, or chemogenic sources. Large-scale sedimentation patterns are delineated as well: detrital magnetite is typical of Amazon discharge, fragmental titanomagnetite is a submarine weathering product of mid-ocean ridge basalts, and titanomagnetite-hemoilmenite intergrowths are common magnetic particles in West African dust. This clear regionalization underlines that magnetic petrology is an excellent indicator of source-to-sink relations. Hematite encrustations, magnetic spherules, and nanoparticle clusters were found at all investigated sites, while bacterial magnetite and authigenic hematite were only detected at the more oxic western site. At the eastern site, surface pits and crevices were seen on the crystal faces indicating subtle early diagenetic reductive dissolution. It was observed that paleoclimatic signatures of magnetogranulometric parameters such as the ratio of anhysteretic and isothermal remanent magnetizations can be formed either by mixing of multiple sources with separate, relatively narrow grain size ranges (western site) or by variable sorting of a single source with a broad grain size distribution (eastern site). Hematite, goethite, and possibly ferrihydrite nanoparticles occur in all sediment cores studied and have either high-coercive or superparamagnetic properties depending on their partly ultrafine grain sizes. These two magnetic fractions are generally discussed as separate fractions, but we suggest that they could actually be genetically linked.

Monadic Parsing in Haskell

This paper is a tutorial on defining recursive descent parsers in Haskell. In the spirit of one-stop shopping, the paper combines material from three areas into a single source. The three areas are functional parsers, the use of monads to structure functional programs, and the use of special syntax for monadic programs in Haskell. More specifically, the paper shows how to define monadic parsers using do notation in Haskell. The paper is targeted at the level of a good undergraduate student who is familiar with Haskell, and has completed a grammars and parsing course. Some knowledge of functional parsers would be useful, but no experience with monads is assumed.

Evaluation of the Evidential Value of the Elemental Composition of Glass, Ink and Paper by Laser-Based Micro-Spectrochemical Methods

Elemental analysis can become an important piece of evidence to assist the solution of a case. The work presented in this dissertation aims to evaluate the evidential value of the elemental composition of three particular matrices: ink, paper and glass. In the first part of this study, the analytical performance of LIBS and LA-ICP-MS methods was evaluated for paper, writing inks and printing inks. A total of 350 ink specimens were examined including black and blue gel inks, ballpoint inks, inkjets and toners originating from several manufacturing sources and/or batches. The paper collection set consisted of over 200 paper specimens originating from 20 different paper sources produced by 10 different plants. Micro-homogeneity studies show smaller variation of elemental compositions within a single source (i.e., sheet, pen or cartridge) than the observed variation between different sources (i.e., brands, types, batches). Significant and detectable differences in the elemental profile of the inks and paper were observed between samples originating from different sources (discrimination of 87 – 100% of samples, depending on the sample set under investigation and the method applied). These results support the use of elemental analysis, using LA-ICP-MS and LIBS, for the examination of documents and provide additional discrimination to the currently used techniques in document examination. In the second part of this study, a direct comparison between four analytical methods (µ-XRF, solution-ICP-MS, LA-ICP-MS and LIBS) was conducted for glass analyses using interlaboratory studies. The data provided by 21 participants were used to assess the performance of the analytical methods in associating glass samples from the same source and differentiating different sources, as well as the use of different match criteria (confidence interval (±6s, ±5s, ±4s, ±3s, ±2s), modified confidence interval, t-test (sequential univariate, p=0.05 and p=0.01), t-test with Bonferroni correction (for multivariate comparisons), range overlap, and Hotelling’s T2 tests. Error rates (Type 1 and Type 2) are reported for the use of each of these match criteria and depend on the heterogeneity of the glass sources, the repeatability between analytical measurements, and the number of elements that were measured. The study provided recommendations for analytical performance-based parameters for µ-XRF and LA-ICP-MS as well as the best performing match criteria for both analytical techniques, which can be applied now by forensic glass examiners.