Genetic correlations and heritability estimates of reproductive traits of Nellore bulls

Estimates of phenotypic, genetics and residual variances for reproductive traits in 5903 Nellore bulls were obtained. The experimental model used was multiple trait derivative-free restricted maximum likelihood. The values obtained for heritability were 0.24 +/- 0.05 for scrotal circumference at 450 days of age and 0.37 +/- 0.05 at 21 months for age at the time of the breeding soundness evaluation; 0.24 +/- 0.05 and 0.26 +/- 0.05 for left and right testicle length; 0.29 +/- 0.05 and 0.31 +/- 0.05 for left and right testicle width; 0.12 +/- 0.04 for testicle format; 0.33 +/- 0.06 for testicle volume; 0.11 +/- 0.03 for gross motility; 0.08 +/- 0.03 for individual motility and 0.05 +/- 0.02 for spermatic vigor; 0.20 +/- 0.04, 0.03 +/- 0.02 and 0.19 +/- 0.04 for larger defects, smaller defects and total defects, respectively. The values for heritability for testicular biometric characteristics were moderate to high while the seminal characteristics, presented low values. Genetic correlations between scrotal circumference with all the reproductive traits were favorable, suggesting the scrotal circumference as a feature of choice in the selection of bulls.

Genetic associations between flight speed and growth traits in Nellore cattle

The aim of the present study was to estimate genetic parameters for flight speed and its association with growth traits in Nellore beef cattle. The flight speed (FS) of 7,402 yearling animals was measured, using a device composed of a pair of photoelectric cells. Time interval data (s) were converted to speed (m/s) and faster animals were regarded as more reactive. The growth traits analyzed were weaning weight (WW), ADG from weaning to yearling age, and yearling scrotal circumference (SC). The (co)variance components were estimated using REML in a multitrait analysis applying an animal model. The model included random direct additive genetic and residual effects, fixed effects of contemporary groups, age of dam (classes), and age of animal as covariable. For WW, the model also included maternal genetic and permanent environmental random effects. The direct heritability estimate for FS was 0.26 +/- 0.05 and direct heritability estimates for WW, SC, and ADG were 0.30 +/- 0.01, 0.48 +/- 0.02, and 0.19 +/- 0.01, respectively. Estimates of the genetic correlation between FS and the growth traits were -0.12 +/- 0.07 (WW), -0.13 +/- 0.08 (ADG), and -0.11 +/- 0.07 (SC). Although the values were low, these correlations showed that animals with better temperaments (slower FS) tended to present better performance. It is possible to infer that long-term selection for weight and scrotal circumference can promote a positive genetic response in the temperament of animals. Nevertheless, to obtain faster genetic progress in temperament, it would be necessary to perform direct selection for such trait. Flight speed is an easily measured indicator of temperament and can be included as a selection criterion in breeding programs for Nellore cattle.

Pedigree analysis and inbreeding depression on growth traits in Brazilian Marchigiana and Bonsmara breeds

The study of population structure by pedigree analysis is useful to identify important circumstances that affect the genetic history of populations. The intensive use of a small number of superior individuals may reduce the genetic diversity of populations. This situation is very common for the beef cattle breeds. Therefore, the objectives of the present study were to analyze the pedigree and possible inbreeding depression on traits of economic interest in the Marchigiana and Bonsmara breeds and to test the inclusion of the individual inbreeding coefficient (F-i) or individual increases in inbreeding coefficient (Delta F-i) in the genetic evaluation model for the quantification of inbreeding depression. The complete pedigree file of the Marchigiana breed included 29,411 animals born between 1950 and 2003. For the Bonsmara breed, the pedigree file included 18,695 animals born between 1988 and 2006. Only animals with at least 2 equivalent generations of known pedigree were kept in the analyses of inbreeding effect on birth weight, weaning weight measured at about 205 d, and BW at 14 mo in the Marchigiana breed, and on birth weight, weaning weight, and scro-tal circumference measured at 12 mo in the Bonsmara breed. The degree of pedigree knowledge was greater for Marchigiana than for Bonsmara animals. The average generation interval was 7.02 and 3.19 for the Marchigiana and Bonsmara breed, respectively. The average inbreeding coefficient was 1.33% for Marchigiana and 0.26% for Bonsmara. The number of ancestors explaining 50% of the gene pool and effective population size computed via individual increase in coancestry were 13 and 97.79 for Marchigiana and 41 and 54.57 for Bonsmara, respectively. These estimates indicate reduction in genetic variability in both breeds. Inbreeding depression was observed for most of the growth traits. The model including Delta F-i can be considered more adequate to quantify inbreeding depression. The inclusion of F-i or Delta F-i in the genetic evaluation model may not result in better fit to the data. A genetic evaluation with simultaneous estimation of inbreeding depression can be performed in Marchigiana and Bonsmara breeds, providing additional information to producers and breeders.

Genetic relationship between growth and reproductive traits in Nellore cattle

The objective of this study was to evaluate the genetic relationship between postweaning weight gain (PWG), heifer pregnancy (HP), scrotal circumference (SC) at 18 months of age, stayability at 6 years of age (STAY) and finishing visual score at 18 months of age (PREC), and to determine the potential of these traits as selection criteria for the genetic improvement of growth and reproduction in Nellore cattle. The HP was defined as the observation that a heifer conceived and remained pregnant, which was assessed by rectal palpation at 60 days. The STAY was defined as whether or not a cow calved every year up to the age of 6 years, given that she was provided the opportunity to breed. The Bayesian linear-threshold analysis via the Gibbs sampler was used to estimate the variance and covariance components applying a multitrait model. Posterior mean estimates of direct heritability were 0.15 +/- 0.00, 0.42 +/- 0.02, 0.49 +/- 0.01, 0.11 +/- 0.01 and 0.19 +/- 0.00 for PWG, HP, SC, STAY and PREC, respectively. The genetic correlations between traits ranged from 0.17 to 0.62. The traits studied generally have potential for use as selection criteria in genetic breeding programs. The genetic correlations between all traits show that selection for one of these traits does not imply the loss of the others.

Degree of multicollinearity and variables involved in linear dependence in additive-dominant models

The objective of this work was to assess the degree of multicollinearity and to identify the variables involved in linear dependence relations in additive-dominant models. Data of birth weight (n=141,567), yearling weight (n=58,124), and scrotal circumference (n=20,371) of Montana Tropical composite cattle were used. Diagnosis of multicollinearity was based on the variance inflation factor (VIF) and on the evaluation of the condition indexes and eigenvalues from the correlation matrix among explanatory variables. The first model studied (RM) included the fixed effect of dam age class at calving and the covariates associated to the direct and maternal additive and non-additive effects. The second model (R) included all the effects of the RM model except the maternal additive effects. Multicollinearity was detected in both models for all traits considered, with VIF values of 1.03 - 70.20 for RM and 1.03 - 60.70 for R. Collinearity increased with the increase of variables in the model and the decrease in the number of observations, and it was classified as weak, with condition index values between 10.00 and 26.77. In general, the variables associated with additive and non-additive effects were involved in multicollinearity, partially due to the natural connection between these covariables as fractions of the biological types in breed composition.

Testicular development of Zebu bulls after chronic treatment with a gonadotropin-releasing hormone agonist

The objective was to compare testis characteristics of Zebu bulls treated with the GnRH agonist, deslorelin, at different times and for different durations during their development. An additional objective was to determine the usefulness of a stain for the transcription factor GATA-binding protein 4 (GATA-4) as a specific marker for Sertoli cell nuclei in cattle. Bulls (54) were allocated to nine groups (n = 6) and received s.c. deslorelin implants as follows: G1 = from birth to 3 mo of age; G2 = from 3 to 6 mo; G3 = from 6 to 9 mo; G4 = from 9 to 12 mo; G5 = from birth to 15 mo; G6 = from 3 to 15 mo; G7 = from 6 to 15 mo; G8 = from 12 to 15 mo; and G9 (control) = no implant. Bulls were castrated at 19 mo of age. Paraffin sections (10 mu m) were subjected to quantitative morphometry and GATA-4 immunohistochemistry. At castration, all bulls in the control group (6/6) had attained puberty (scrotal circumference ! 28 cm), whereas a smaller proportion (P < 0.05) had reached puberty in G2 (2/5) and G6 (1/ 6). Bulls in G2 and G6 also had a lesser (P < 0.05) testis weight compared with the control group. Total volume of seminiferous epithelium and total daily sperm production in G2 and G6 were only half that observed in the control group. Spermatids were observed in less than 50% of seminiferous tubules in G2, G6, and G7 compared with 82% in the control group (P < 0.05). Staining for GATA-4 was specific for and abundant in the Sertoli cell nucleus in both pre- and postpubertal bulls, and no other cell nucleus inside the seminiferous tubule was positive for GATA-4. Total number of Sertoli cells was not affected by treatment (P = 0.45), but nuclear volume was smaller in G2 and G6 (P < 0.05) compared with the control group. In conclusion, treatment of Zebu bulls with deslorelin had no apparent beneficial effect on testis development and delayed puberty when treatment was initiated at 3 mo of age. Staining for GATA-4 was a useful method for identifying and quantifying Sertoli cell nuclei in both pre- and postpubertal bulls.

Estimates of genetic parameters for visual scores and their correlation with production and reproductive traits in Brahman cattle

The objective of this study was to evaluate the association of visual scores of body structure, precocity and muscularity with production (body weight at 18 months and average daily gain) and reproductive (scrotal circumference) traits in Brahman cattle in order to determine the possible use of these scores as selection criteria to improve carcass quality. Covariance components were estimated by the restricted maximum likelihood method using an animal model that included contemporary group as fixed effect. A total of 1,116 observations of body structure, precocity and muscularity were used. Heritability was 0.39, 043 and 0.40 for body structure, precocity and muscularity, respectively. The genetic correlations were 0.79 between body structure and precocity, 0.87 between body structure and muscularity, and 0.91 between precocity and muscularity. The genetic correlations between visual scores and body weight at 18 months were positive (0.77, 0.57 and 0.59 for body structure, precocity and muscularity, respectively). Similar genetic correlations were observed between average daily gain and visual scores (0.60, 0.57 and 0.48, respectively), whereas the genetic correlations between scrotal circumference and these scores were low (0.13, 0.02, and 0.13). The results indicate that visual scores can be used as selection criteria in Brahman breeding programs. Favorable correlated responses should be seen in average daily gain and body weight at 18 months. However, no correlated response is expected for scrotal circumference.

Waist circumference cut-off values for the prediction of cardiovascular risk factors clustering in Chinese school-aged children : a cross-sectional study

Background: Waist circumference has been identified as a valuable predictor of cardiovascular risk in children. The development of waist circumference percentiles and cut-offs for various ethnic groups are necessary because of differences in body composition. The purpose of this study was to develop waist circumference percentiles for Chinese children and to explore optimal waist circumference cut-off values for predicting cardiovascular risk factors clustering in this population.----- ----- Methods: Height, weight, and waist circumference were measured in 5529 children (2830 boys and 2699 girls) aged 6-12 years randomly selected from southern and northern China. Blood pressure, fasting triglycerides, low-density lipoprotein cholesterol, high-density lipoprotein cholesterol, and glucose were obtained in a subsample (n = 1845). Smoothed percentile curves were produced using the LMS method. Receiver-operating characteristic analysis was used to derive the optimal age- and gender-specific waist circumference thresholds for predicting the clustering of cardiovascular risk factors.----- ----- Results: Gender-specific waist circumference percentiles were constructed. The waist circumference thresholds were at the 90th and 84th percentiles for Chinese boys and girls respectively, with sensitivity and specificity ranging from 67% to 83%. The odds ratio of a clustering of cardiovascular risk factors among boys and girls with a higher value than cut-off points was 10.349 (95% confidence interval 4.466 to 23.979) and 8.084 (95% confidence interval 3.147 to 20.767) compared with their counterparts.----- ----- Conclusions: Percentile curves for waist circumference of Chinese children are provided. The cut-off point for waist circumference to predict cardiovascular risk factors clustering is at the 90th and 84th percentiles for Chinese boys and girls, respectively.

Associations of body mass index and waist circumference with: energy intake and percentage energy from macronutrients, in a cohort of Australian children

Background It is evident from previous research that the role of dietary composition in relation to the development of childhood obesity remains inconclusive. Several studies investigating the relationship between body mass index (BMI), waist circumference (WC) and/or skin fold measurements with energy intake have suggested that the macronutrient composition of the diet (protein, carbohydrate, fat) may play an important contributing role to obesity in childhood as it does in adults. This study investigated the possible relationship between BMI and WC with energy intake and percentage energy intake from macronutrients in Australian children and adolescents. Methods Height, weight and WC measurements, along with 24 h food and drink records (FDR) intake data were collected from 2460 boys and girls aged 5-17 years living in the state of Queensland, Australia. Results Statistically significant, yet weak correlations between BMI z-score and WC with total energy intake were observed in grades 1, 5 and 10, with only 55% of subjects having a physiologically plausible 24 hr FDR. Using Pearson correlations to examine the relationship between BMI and WC with energy intake and percentage macronutrient intake, no significant correlations were observed between BMI z-score or WC and percentage energy intake from protein, carbohydrate or fat. One way ANOVAs showed that although those with a higher BMI z-score or WC consumed significantly more energy than their lean counterparts. Conclusion No evidence of an association between percentage macronutrient intake and BMI or WC was found. Evidently, more robust longitudinal studies are needed to elucidate the relationship linking obesity and dietary intake.

The ballistic resistance of thin aluminium plates with varying degrees of fixity along the circumference

The ballistic performance of thin aluminium targets and influence thereon of different circumferential fixity conditions were studied both experimentally and by finite element simulations. A pressure gun was employed to carry out the experiments while the numerical simulations were performed on ABAQUS/Explicit finite element code using Johnson-Cook elasto-viscoplastic material model. 1 mm thick 1100-H12 aluminium plates of free span diameter 255 mm were normally impacted by 19 mm diameter ogive and blunt nosed projectiles. The boundary conditions of the plate were varied by varying the region of fixity along its circumference as 100%, 75%, 50% and 25% in experiments and the numerical simulations. Further, simulations were carried out to compare the response of the plates with 50% and 75% continuous fixity with those with two and three symmetrical intermittent regions of 25% fixity respectively. The variation in the boundary condition has been found to have insignificant influence on the failure mode of the target however; it significantly affected the mechanics of target deformation and its energy absorption capacity. The ballistic limit increased with decrease in the region of fixity. It decreased for intermittent fixity in comparison with equivalent continuous fixity. And, it has been found to be higher for the impact with projectile having blunt nose in comparison with the one having ogive nose. (C) 2014 Elsevier Ltd. All rights reserved.