Design and evaluation of multi-band RF energy harvesting circuits and antennas for WSNs

Radio frequency (RF) energy harvesting is an emerging technology that will enable to drive the next generation of wireless sensor networks (WSNs) without the need of using batteries. In this paper, we present RF energy harvesting circuits specifically developed for GSM bands (900/1800) and a wearable dual-band antenna suitable for possible implementation within clothes for body worn applications. Besides, we address the development and experimental characterization of three different prototypes of a five-stage Dickson voltage multiplier (with match impedance circuit) responsible for harvesting the RF energy. Different printed circuit board (PCB) fabrication techniques to produce the prototypes result in different values of conversion efficiency. Therefore, we conclude that if the PCB fabrication is achieved by means of a rigorous control in the photo-positive method and chemical bath procedure applied to the PCB it allows for attaining better values for the conversion efficiency. All three prototypes (1, 2 and 3) can power supply the IRIS sensor node for RF received powers of -4 dBm, -6 dBm and -5 dBm, and conversion efficiencies of 20, 32 and 26%, respectively. © 2014 IEEE.

CMOS indoor light energy harvesting system for wireless sensing applications

This book discusses in detail the CMOS implementation of energy harvesting. The authors describe an integrated, indoor light energy harvesting system, based on a controller circuit that dynamically and automatically adjusts its operation to meet the actual light circumstances of the environment where the system is placed. The system is intended to power a sensor node, enabling an autonomous wireless sensor network (WSN). Although designed to cope with indoor light levels, the system is also able to work with higher levels, making it an all-round light energy harvesting system. The discussion includes experimental data obtained from an integrated manufactured prototype, which in conjunction with a photovoltaic (PV) cell, serves as a proof of concept of the desired energy harvesting system. © 2016 Springer International Publishing. All rights are reserved.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.

Harvest control rule vs optimal harvesting of an age-structured population: The case of the Ibero-Atlantic Sardine Fishery

Research Masters

Studies on the Quality of Rainwater at Various Land Use Locations and Variations by Interaction with Domestic Rainwater Harvesting Systems

The present study focused on the quality of rainwater at various land use locations and its variations on interaction with various domestic rainwater harvesting systems.Sampling sites were selected based upon the land use pattern of the locations and were classified as rural, urban, industrial and sub urban. Rainwater samples were collected from the south west monsoon of May 2007 to north east monsoon of October 2008, from four sampling sites namely Kothamangalam, Emakulam, Eloor and Kalamassery, in Ernakulam district of the State of Kerala, which characterized typical rural, urban, industrial and suburban locations respectively. Rain water samples at various stages of harvesting were also collected. The samples were analyzed according to standard procedures and their physico-chemical and microbiological parameters were determined. The variations of the chemical composition of the rainwater collected were studied using statistical methods. It was observed that 17.5%, 30%, 45.8% and 12.1% of rainwater samples collected at rural, urban, industrial and suburban locations respectively had pH less than 5.6, which is considered as the pH of cloud water at equilibrium with atmospheric CO,.Nearly 46% of the rainwater samples were in acidic range in the industrial location while it was only 17% in the rural location. Multivariate statistical analysls was done using Principal Component Analysis, and the sources that inf1uence the composition of rainwater at each locations were identified .which clearly indicated that the quality of rain water is site specific and represents the atmospheric characteristics of the free fall The quality of harvested rainwater showed significant variations at different stages of harvesting due to deposition of dust from the roof catchment surface, leaching of cement constituents etc. Except the micro biological quality, the harvested rainwater satisfied the Indian Standard guide lines for drinking water. Studies conducted on the leaching of cement constituents in water concluded that tanks made with ordinary portland cement and portland pozzolana cement could be safely used for storage of rain water.

Studies on Energy Requirement and Conservation in Selected Fish Harvesting Systems

Present work deals with the studies on energy requirement and convervation in selected fish harvesting systems.Modem fishing is one of the most energy intensive methods of food production. Fossil fuels used for motorised and mechanised fishing are nonrenewable and limited. Most of the environmental problems that confront mankind today are connected to the use of energy in one way or another. Code of Conduct for Responsible Fisheries (FAO, 1995) highlights the need for efficient use of energy in the fisheries sector. Information on energy requirement in different fish harvesting systems, based on the principles of energy analysis, is entirely lacking in respect of Indian fisheries. Such an analysis will provide an unbiased decision making support for maximising the yield per unit of non-renewable energy use, from different fishery resource systems, by rational deployment of harvesting systems. In the present study, results of investigations conducted during 1997-2000 on energy requirement in selected fish harvesting systems and approaches to energy conservation in fishing, are presented along with a detailed description of the fish harvesting systems and their operation. The content of the thesis is organised into 8 Chapters.

Spatial and harvesting influence on growth, yield, quality and economic potential of Kalmegh (Andrographis paniculata Wall Ex. Nees)

Andrographis paniculata, commonly known as Kalmegh, is used both in Ayurvedic and Unani system of medicines because of its immunological, antibacterial and hepatoprotective properties. This study was carried out to investigate the influence of four harvesting times (120,135,150 days after planting and at seed maturity) and four planting distances (30×15, 30×10, 20×15 and 20×10 cm) on growth, dry herbage biomass, seed yield and quality traits of Andrographis paniculata at CCS Haryana Agricultural University, Hisar, India in the two years 2005 and 2006. The treatments were laid out in a split plot design with three replications. The maximum values for dry herbage biomass yield (5.14 t ha^(-1)), net returns (760.00 EUR ha^(-1)), B:C ratio (2.59), andrographolide content (2.63%) and total yield (135.00 kg ha^(-1)) were detected 135 days after planting with an optimum planting distance of 30×15 cm. However, the maximum iron content was estimated 120 days after planting. The highest dry herbage (4.58 t ha^(-1)) and maximum seed yield (19.7 kg ha^(-1)) were registered at plants that were lined out with a distance of 20×10 cm.

Numerical Response of Breeding Birds Following Experimental Selection Harvesting in Northern Hardwood Forests

Silvicultural treatments have been shown to alter the composition of species assemblages in numerous taxa. However, the intensity and persistence of these effects have rarely been documented. We used a before-after, control-impact (BACI) paired design, i.e., five pairs of 25-ha study plots, 1-control and 1-treated plot, to quantify changes in the density of eight forest bird species in response to selection harvesting over six breeding seasons, one year pre- and five years postharvest. Focal species included mature forest associates, i.e., Northern Parula (Setophaga americana) and Black-throated Green Warbler (Setophaga virens), forest generalists, i.e., Yellow-bellied Sapsucker (Sphyrapicus varius) and Swainson’s Thrush (Catharus ustulatus), early-seral specialists, i.e., Mourning Warbler (Geothlypis philadelphia) and Chestnut-sided Warbler (Setophaga pensylvanica), species associated with shrubby forest gaps, i.e., Black-throated Blue Warbler (Setophaga caerulescens), and mid-seral species, i.e., American Redstart (Setophaga ruticilla). As predicted, we found a negative numerical response to the treatment in the Black-throated Green Warbler, no treatment effect in the Yellow-bellied Sapsucker, and a positive treatment effect in early-seral specialists. We only detected a year effect in the Northern Parula and the American Redstart. There was evidence for a positive treatment effect on the Swainson’s Thrush when the regeneration started to reach the pole stage, i.e., fifth year postharvest. These findings suggest that selection harvesting has the potential to maintain diverse avian assemblages while allowing sustainable management of timber supply, but future studies should determine whether mature-forest associates can sustain second- and third-entry selection harvest treatments.

RF Energy Harvesting in WSNs

As a vital factor affecting system cost and lifetime, energy consumption in wireless sensor networks (WSNs) has been paid much attention to. This article reviews existing energy harvesting technology applied in WSNs, and analyzes advantages of harvesting radio frequency (RF) energy in WSNs.

Indirect population dynamic benefits of altered life-history trade-offs in response to egg harvesting

Variations in demographic rates due to differential resource allocation between individuals are important considerations in the development of accurate population dynamic models. Systematic harvesting can alter age structure and/or reduce population density, conferring indirect positive benefits on the source population as a result of a consequent redistribution of resources between the remaining individuals. Independently of effects mediated through changes in density and competition, demographic rates can also be influenced by within-individual competition for resources. Harvesting dependent life stages can reduce an individual's current reproductive costs, allowing increased investment in its future fecundity and survival. Although such changes in demographic rates are well known, there has been little exploration of the potential impact on population dynamics. We use empirical data collected from a successfully reintroduced population of the Mauritius kestrel Falco punctatus to explore the population consequences of manipulating reproductive effort through harvesting. Consequent increases in an individual's future fecundity and survival allow source populations to withstand longer and more intensive harvesting regimes without being exposed to an increase in extinction risk, increasing maximum sustainable yields. These effects may also buffer populations against the impacts of stochastic events, but directional shifts in environmental conditions that increase reproductive costs may have detrimental population-level effects.

Hay strewing, brush harvesting of seed and soil disturbance as tools for the enhancement of botanical diversity in grasslands

Since the middle of the last century agricultural intensification within Europe has led to a drastic decline in the extent of botanically diverse grasslands. Whilst measures to enhance the diversity of agriculturally-improved grasslands are in place, success has often been limited. One of the primary factors limiting success is the paucity of sources of propagules of desirable species in the surrounding landscape. The restoration of two contrasting grassland types lowland hay meadow and chalk grassland) was examined using a replicated block experiment to assess the effectiveness of two methods of seed application (hay strewing and brush harvesting) and two methods of pre-treatment disturbance (power harrowing and turf stripping). The resulting changes in botanical composition were monitored for 4 years. Seed addition by both methods resulted in significant temporal trends in plant species composition and increases in plant species richness, which were further enhanced by disturbance. Power harrowing increased the effectiveness of the seed addition treatments at the lowland hay meadow site. At the chalk grassland site a more severe disturbance created by turf stripping was used and shown to be preferable. Whilst both hay strewing and brush harvesting increased plant species richness, hay strewing was more effective at creating a sward similar to that of the donor site. Soil disturbance and seed application rate at the recipient site and timing of the hay cut at the donor site are all factors to be considered prior to the commencement of restoration management. (c) 2006 Elsevier Ltd. All rights reserved.