Geoquímica de elementos maiores e traços de granitoides neoproterozoicos da província Borborema e sua correlação com propriedades físicas de rochas

This paper discusses the correlation of thermal conductivity, density and magnetic susceptibility with composition of major and trace elements of Neoproterozoic igneous bodies from Borborema Province, Northeastern Brazil. These properties were used as potential markers among the studied magmatic suites. For the correlation between petrophysical and geochemical properties it was considered a set of 195 chemical analyzes of granitoid rocks, separated by the degree of acidity in basic, intermediate and acidic. Major (SiO2, Al2O3, Fe2O3, MgO, CaO, Na2O, K2O and TiO2) and some trace elements (Rb, Sr, Ba, Zr, Th and U) that are usually linked to the formation of the most common minerals of igneous rocks were used. The results show that SiO2 has the best positive correlation with the thermal conductivity, while Al2O3, CaO, Fe2O3, MgO and TiO2 exhibit negative correlation for the same property. The correlation with density is opposite to that one for these oxides with the thermal conductivity. The magnetic susceptibility did not correlate with the elements studied. The results for thermal conductivity and density indicate a tendency of SiO2 and oxides with higher affinity with mafic minerals (Al2O3, CaO, Fe2O3, TiO2 and MgO) in controlling these petrophysical parameters. The set of samples was divided into five different magmatic suites based on their lithogeochemical aspects into: i) peralkaline / alkaline; ii) alkaline; iii) calc-alkaline; iv) high potassium calcium alkaline; and v) shoshonitic. Data analysis showed that the thermal conductivity and density presented good results in the individualization of these suites, notably between peralkaline / alkaline, alkaline suites, calc-alkaline and shoshonitic. However, the high-K calc-alkaline suite overlapped with the other. In contrast, the magnetic susceptibility did not show effective results for separating the five chemical suites.

Modelos de condutividade térmica em rochas silicáticas, com ênfase em rochas da província Borborema, NE do Brasil

A practical approach to estimate rock thermal conductivities is to use rock models based just on the observed or expected rock mineral content. In this study, we evaluate the performances of the Krischer and Esdorn (KE), Hashin and Shtrikman (HS), classic Maxwell (CM), Maxwell-Wiener (MW), and geometric mean (GM) models in reproducing the measures of thermal conductivity of crystalline rocks.We used 1,105 samples of igneous and metamorphic rocks collected in outcroppings of the Borborema Province, Northeastern Brazil. Both thermal conductivity and petrographic modal analysis (percent volumes of quartz, K-feldspar, plagioclase, and sum of mafic minerals) were done. We divided the rocks into two groups: (a) igneous and ortho-derived (or meta-igneous) rocks and (b) metasedimentary rocks. The group of igneous and ortho-derived rocks (939 samples) covers most the lithologies de_ned in the Streckeisen diagram, with higher concentrations in the fields of granite, granodiorite, and tonalite. In the group of metasedimentary rocks (166 samples), it were sampled representative lithologies, usually of low to medium metamorphic grade. We treat the problem of reproducing the measured values of rock conductivity as an inverse problem where, besides the conductivity measurements, the volume fractions of the constituent minerals are known and the effective conductivities of the constituent minerals and model parameters are unknown. The key idea was to identify the model (and its associated estimates of effective mineral conductivities and parameters) that better reproduces the measures of rock conductivity. We evaluate the model performances by the quantity  that is equal to the percentage of number of rock samples which estimated conductivities honor the measured conductivities within the tolerance of 15%. In general, for all models, the performances were quite inferior for the metasedimentary rocks (34% <  < 65%) as compared with the igneous and ortho-derived rocks (51% <  < 70%). For igneous and ortho-derived rocks, all model performances were very similar ( = 70%), except the GM-model that presented a poor performance (51% <  < 65%); the KE and HS-models ( = 70%) were slightly superior than the CM and MW-models ( = 67%). The quartz content is the dominant factor in explaining the rock conductivity for igneous and ortho-derived rocks; in particular, using the MW-model the solution is in practice vi UFRN/CCET– Dissertação de mestrado the series association of the quartz content. On the other hand, for metasedimentary rocks, model performances were different and the performance of the KEmodel ( = 65%) was quite superior than the HS ( = 53%), CM (34% <  < 42%), MW ( = 40%), and GM (35% <  < 42%). The estimated effective mineral conductivities are stable for perturbations both in the rock conductivity measures and in the quartz volume fraction. The fact that the metasedimentary rocks are richer in platy-minerals explains partially the poor model performances, because both the high thermal anisotropy of biotite (one of the most common platy-mineral) and the difficulty in obtaining polished surfaces for measurement coupling when platyminerals are present. Independently of the rock type, both very low and very high values of rock conductivities are hardly explained by rock models based just on rock mineral content.

Petrologia do Plutão Bom Jardim de Goiás (PBJG): implicação na evolução neoproterozoica da Província Tocantins

The Bom Jardim de Goiás Pluton (PBJG) is a semi-circular body, located in the central portion of the Tocantins Province, intrusive into orthogneisses and metassupracrustals of the Arenópolis Magmatic Arc. These metasupracrustals present a low to moderate dipping banding or schistosity, have a low to moderate angle of banding / foliation, defined by mica, andalusite and sillimanite and cordierite, which characterize an amphibolite facies metamorphism. This structure is crosscut by the emplacement of the PBJG rocks. The abrupt nature of the contacts and the absence of ductile structures indicate that the intrusion took place in a relatively cold crust. Under petrographic grounds, the pluton consists mainly of monzodiorites, tonalite and granodiorite, following the low to medium-K calk-alkaline alkaline trend. Rocks of the PBJG have hornblende and biotite as the main mafic phases, besides subordinate clinopyroxene, titanite, epidote and opaque. Late dikes of leucogranite contain only mineral biotite as relevant accessory mineral. One U-Pb zircon dating of a monzodiorite yielded an age of 550 ± 12 Ma (MSWD = 1.06). Whole-rock and mineral chemistry suggest that the studied rocks are calc-alkaline, having evolved by fractional crystallization of Ca- and Fe-Mg minerals under high oxygen fugacity. Using the amphibole-plagioclase geothermometer and the Al-in amphibole geobarometer, we calculate temperatures and pressures of, respectively, 692-791 °C e 2.4-5.0 kbar for the intrusion of the PBJG, which is corroborated by previous metamorphic assemblages in the country rocks. The geological, geochemical and geochronological features of PBJG demonstrate their post-tectonic or post-collisional nature, with emplacement into an already uplifted and relatively cool crust at the end of brasiliano orogeny in this portion of the Tocantins Province.

Petrologia do Plutão Bom Jardim de Goiás (PBJG): implicação na evolução neoproterozoica da Província Tocantins

The Bom Jardim de Goiás Pluton (PBJG) is a semi-circular body, located in the central portion of the Tocantins Province, intrusive into orthogneisses and metassupracrustals of the Arenópolis Magmatic Arc. These metasupracrustals present a low to moderate dipping banding or schistosity, have a low to moderate angle of banding / foliation, defined by mica, andalusite and sillimanite and cordierite, which characterize an amphibolite facies metamorphism. This structure is crosscut by the emplacement of the PBJG rocks. The abrupt nature of the contacts and the absence of ductile structures indicate that the intrusion took place in a relatively cold crust. Under petrographic grounds, the pluton consists mainly of monzodiorites, tonalite and granodiorite, following the low to medium-K calk-alkaline alkaline trend. Rocks of the PBJG have hornblende and biotite as the main mafic phases, besides subordinate clinopyroxene, titanite, epidote and opaque. Late dikes of leucogranite contain only mineral biotite as relevant accessory mineral. One U-Pb zircon dating of a monzodiorite yielded an age of 550 ± 12 Ma (MSWD = 1.06). Whole-rock and mineral chemistry suggest that the studied rocks are calc-alkaline, having evolved by fractional crystallization of Ca- and Fe-Mg minerals under high oxygen fugacity. Using the amphibole-plagioclase geothermometer and the Al-in amphibole geobarometer, we calculate temperatures and pressures of, respectively, 692-791 °C e 2.4-5.0 kbar for the intrusion of the PBJG, which is corroborated by previous metamorphic assemblages in the country rocks. The geological, geochemical and geochronological features of PBJG demonstrate their post-tectonic or post-collisional nature, with emplacement into an already uplifted and relatively cool crust at the end of brasiliano orogeny in this portion of the Tocantins Province.

Pirometamorfismo provocado por intrusões básicas cenozoicas em rochas da Bacia Potiguar, RN: integração de dados geológicos e petrofísicos

The Potiguar Basin is located in the Brazilian Equatorial Margin and presents sedimentary rocks affected by Cenozoic basic igneous intrusions, known as Macau Magmatism. The most prominent effect related to these intrusions is the formation of buchites, pyrometamorphic rocks that occur at very high temperatures and very low pressures in the sanidinite metamorphic facies. Through literature review, field observations, petrographic and petrophysical data, accessing the database of previous studies and results from this research, it was possible to characterize and estimate the effects produced in the thermal aureole of some hypabyssal bodies in the basin. The most relevant features associated with the intrusions are: compactation, hydraulic fracturing, partial melting and recrystallization of country rocks. According to the observed mineral occurrences, temperature of 800 to 1200 °C and pressure below 0,5 kbar were estimated at the contacts of the igneous bodies. The thermal modeling of the São João plug indicates thermal effects extending up to 150 m away from the contact and cooling time of approximately 265,000 years. After the peak of temperature, followed a cooling phase registered by remobilization and precipitation of minerals at low-temperature in faults, fractures and geodes, interpreted as derived from reactions with sedimentary rocks and metasomatic / hydrothermal fluids with abundant carbonatization and silicification.

Pirometamorfismo provocado por intrusões básicas cenozoicas em rochas da Bacia Potiguar, RN: integração de dados geológicos e petrofísicos

The Potiguar Basin is located in the Brazilian Equatorial Margin and presents sedimentary rocks affected by Cenozoic basic igneous intrusions, known as Macau Magmatism. The most prominent effect related to these intrusions is the formation of buchites, pyrometamorphic rocks that occur at very high temperatures and very low pressures in the sanidinite metamorphic facies. Through literature review, field observations, petrographic and petrophysical data, accessing the database of previous studies and results from this research, it was possible to characterize and estimate the effects produced in the thermal aureole of some hypabyssal bodies in the basin. The most relevant features associated with the intrusions are: compactation, hydraulic fracturing, partial melting and recrystallization of country rocks. According to the observed mineral occurrences, temperature of 800 to 1200 °C and pressure below 0,5 kbar were estimated at the contacts of the igneous bodies. The thermal modeling of the São João plug indicates thermal effects extending up to 150 m away from the contact and cooling time of approximately 265,000 years. After the peak of temperature, followed a cooling phase registered by remobilization and precipitation of minerals at low-temperature in faults, fractures and geodes, interpreted as derived from reactions with sedimentary rocks and metasomatic / hydrothermal fluids with abundant carbonatization and silicification.

Interação de microorganismos na solubilização de fósforo e potássio de rochas para produção de biofertilizantes

he present model of agriculture is based on intensive use of industrial inputs, due to its rapid response, but it brings harmful consequences to the environment, and it is necessary the use of modern inputs. And an alternative is the use of rock biofertilizers in agriculture, a product easy to use, with higher residual effect and does not harm the environment. The objective of study was to evaluate the inoculation and co-inoculation of different microorganisms in the solubilization of rock phosphate and potash ground microbial evaluating the best performance in the production of biofertilizers comparing with rocks pure in soil chemical properties and, verify effect of inoculation of the bacterium Paenibacillus polymyxa in the absorption of minerals dissolved in the development of cowpea (Vigna unguiculata [L.] Walp.). The first bioassay was conducted in Laboratory (UFRN) for 72 days in Petri dishes, where the rock powder was increased by 10% and sulfur co-inoculated and inoculated with bacterial suspension of Paenibacillus polymyxa grown in medium tryptone soy broth, Ralstonia solanacearum in medium Kelman, Cromobacterium violaceum in medium Luria-Bertani and Acidithiobacillus thiooxidans in medium Tuovinen and Kelly,and fungi Trichoderma humatum and Penicillium fellutanum in malt extract. Every 12 days, samples were removed in order to build up the release curve of minerals. The second bioassay was conducted in a greenhouse of the Agricultural Research Corporation of Rio Grande do Norte in experimental delineation in randomized block designs, was used 10 kg of an Yellow Argissolo Dystrophic per pot with the addition of treatments super phosphate simple (SS), potassium chloride (KCl), pure rock, biofertilizers in doses 40, 70, 100 and 200% of the recommendation for SS and KCl, and a control, or not inoculated with bacteria P. polymyxa. Were used seeds of cowpea BRS Potiguar and co-inoculated with the bacterial suspension of Bradyrhizobium japonicum and P. polymyxa. The first crop was harvested 45 days after planting, were evaluated in the dry matter (ADM), macronutrients (N, P, K, Ca, Mg) and micronutrients (Zn, Fe, Mn) in ADM. And the second at 75 days assessing levels of macro end micronutrients in plants and soil, and the maximum adsorption capacity of P in soil. The results showed synergism in co-inoculations with P. polymyxa+R. solanacearum and, P. polymyxa+C. violaceum solubilizations providing higher P and K, respectively, and better solubilization time at 36 days. The pH was lower in biofertilizers higher doses, but there was better with their addition to P at the highest dose. Significant reduction of maximum adsorption capacity of phosphorus with increasing dose of biofertilizer. For K and Ca was better with SS+KCl, and Mg to pure rock. There was an effect of fertilization on the absorption, with better results for P, K and ADM with SS+KCL, and N, Ca and Mg for biofertilizers. Generally, the P. polymyxa not influence the absorption of the elements in the plant. In treatments with the uninoculated P. polymyxa chemical fertilizer had an average significantly higher for weight and number of grains. And in the presence of the bacteria, biofertilizers and chemical fertilizers had positive values in relation to rock and control. The data show that the rocks and biofertilizers could meet the need of nutrients the plants revealed as potential for sustainable agriculture

Acervo de minerais e rochas: instrumento para o ensino de Geociências.

Litoteca é um acervo de minerais e rochas, o qual pode ser utilizado para diferentes fins. Contudo, no caso apresentado, subsidia o desenvolvimento de atividades de ensino e, posteriormente, de pesquisa e extensão.

Petrografia, geoquímica e geocronologia das rochas metavulcânicas e metaplutônicas dos Greenstone Belts faina e Serra de Santa Rita : implicações para o ambiente tectônico

Dissertação (mestrado)—Universidade de Brasília, Instituto de Geociências, Pós-Graduação em Geologia, 2016.

Análise Exploratória da Métrica de Superfície Topográfica para Previsão do Nível Freático - Aplicação a um Sistema Cársico e Rochas Fracturadas

Partindo da premissa de que não só o nível freático acompanha a linha topográfica do terreno, mas também a direcção de escorrência das bacias subterrâneas tende a coincidir com a direcção predominante de escorrência das bacias hidrográficas à superfície, principalmente em aquíferos fracturados, foi realizado um estudo com o objectivo de definir um modelo explicativo do nível freático no sistema aquífero Estremoz-Cano e no sector pouco produtivo das rochas ígneas e metamórficas da Zona de Ossa Morena (ZOM), em função das característica métricas do terreno, aferidas a partir da uma análise espacial raster, com multi-resolução, gradativa e interpolativa. Diferentes modelos foram criados e testados a partir dos dados do nível hidroestático, da elevação do terreno e de indíces métricos do terreno computados a partir de uma superfície digital de terreno hidrologicamente funcional. A análise estatística das variáveis independentes computadas permitiu concluir que o nível hidrostático (NHE) é extremamente correlacionável com o índice de convexidade calculado (Convex) e a elevação do terreno numa Regressão Linear do Tipo Piecewise.

Efeito de rochas fonolíticas sobre a matéria seca de plantas de trigo.

2015

Caracterização analítica de rochas silicatadas e avaliação de seu potencial agrícola como fonte de potássio.

O presente estudo avaliou a eficiência agronômica da aplicação de pó de rochas silicatadas como fonte de potássio em cultivos consecutivos de milheto e alfafa em casa de vegetação. As rochas Biotita Xisto (BX), Sienito Ceraíma (TA15), Mafurito Acreúna (TA21), Sienito SANW (TA20), Biotita Gnaísse (EL02) e Fonolito Curimbaba (FN) foram aplicadas como fontes de potássio de liberação lenta em três doses de 1,25; 2,50 e 5,0 g de rocha moída por kg de solo. Cloreto de potássio foi utilizado como fertilizante convencional em doses de 0,10; 0,20 e 0,40 g de KCl kg-1 de solo. O solo utilizado nos experimentos foi um latossolo amarelo distrófico de textura média, com teor de potássio de 1,2 mmolc dm-3 solo. A rocha TA21 foi testada sem e com correção da acidez do solo. Com a finalidade de observar a dissolução das rochas em um ambiente com plantas foram realizados cinco cultivos consecutivos: (1) milheto (62 dias de cultivo); (2), (3) e (4) alfafa (80, 115 e 155 dias de cultivo, respectivamente) e (5) milheto, com 80 dias de cultivo. A produção de matéria seca no cultivo da alfafa foi significativamente menor do que o cultivo do milheto. As amostras de forrageira foram digeridas e quantificadas empregando o método de decomposição assistida por radiação micro-ondas com HNO3 + H2O2 para a determinação do teor de potássio extraído pelas plantas. As amostras de rochas foram caracterizadas por fluorescência de raios X, difração de raios X, microscopia eletrônica de varredura e distribuição de tamanho das partículas e submetidas a ensaios com solução extratora Mehlich-1, ácido acético e ácido fumárico 0,05mol L-1, em diferentes tempos de extração. Todos os extratos foram quantificados por espectrometria de emissão óptica com plasma acoplado indutivamente (ICP OES), sendo determinados os teores de Al, Ca, K, Mg, Mn, Na, P e Zn. O método da resina trocadora de íons foi aplicado para todas as amostras de rochas avaliadas, sendo quantificados K, Ca, Mg e P. Potássio solúvel foi determinado por fotometria de chama após extração com água quente, método oficial do Ministério da Agricultura, Pecuária e Abastecimento (MAPA). Para extração drástica foram avaliados dois métodos de decomposição assistida por radiação microondas: com uso de água régia e água régia invertida com adição de H2O2 e 2 etapas de pré-decomposição. Os elementos Al, Ca, K, Mg, Mn, Na e Zn foram quantificados por ICP OES e os resultados obtidos foram comparados por meio do teste t pareado, que indicou não haver diferença significativa entre os métodos de decomposição no intervalo de 95% de confiança. A partir das concentrações obtidas nas extrações e da quantidade de potássio extraída nos cultivos foi realizado o cálculo de correlação entre os extratores e as plantas, considerando a eficiência agronômica. O uso da calagem nos solos que receberam adição da rocha TA21 influenciou significativamente a absorção de potássio, sendo que foi observado efeito relativo à liberação de K apenas quando essa rocha foi adicionada ao solo sem tratamento prévio com a calagem. A ordem decrescente de eficiência de extração de potássio, considerando o total aplicado nos tratamentos e o K extraído pelas plantas foi EL02 > TA21-SC > KCl > FN> BX> TA20 > TA15 > TA21. Os dois métodos de decomposição desenvolvidos apresentaram melhor correlação com o potássio extraído das rochas EL02. O estudo de casa de vegetação corroborou com os ensaios de extração realizados em laboratório, que indicaram que a rocha EL02 é a que possui o maior percentual de liberação de K em relação às demais rochas avaliadas.

Biossolubilização de rochas silicáticas e produção de ácidos orgânicos in vitro por fungos filamentosos isolados de solos ferruginosos de Minas Gerais.

2016