Análise e avaliação dos elementos de penetração no solo de equipamentos rodoviários após revestimento

The main objective is to analyze the abrasive wear resistance to the low stress of the elements that make up the organs of road machinery that are exposed directly to contact with abrasives. These samples were analyzed after these elements are coated superficially by the process of welding electrode coated with (SAER) and the manual process of coating type LVOF thermal spraying. As well, is to provide suggestions for a better recovery and return of these elements, which are reducing costs and avoiding downtime in the fronts of service. The samples were made from a substrate of carbon ABNT 1045 tempered steel, following the same specifications and composition of metals and alloys of constituents was followed the standard governing the dimensions of these samples and in accordance with the corresponding size. The results were evaluated by testing the hardness, abrasion resistance to wear by the low stress and the loss of volume involving the microstructure of coatings analyzed

Avaliação da potencialidade dos resíduos de gesso de revestimento incorporados em formulações de massas cerâmicas

In building, during the implementation process of major or even minor works, there is a considerable waste of plaster in the steps of coating, making it is a negative factor because of the loss of these processes constructive remains incorporated into buildings, as component, whose final dimensions are higher than those projected. Another negative factor is the disposal of waste gypsum in inappropriate places, thus contributing to the degradation of environmental quality, due to the leaching of this waste and may trigger the formation of sulfuric acid. Therefore, based on this picture, processing and reuse of waste coating, combined with the ceramics industry, which is a strong potential in the reuse of certain types of waste, promote mutual benefits. Thus the overall objective of this work is to conduct a search with scientific and technological aspects, to determine the effect of the incorporation of the residue of plaster for coating, from the building, the formulation of bodies for red ceramic. The residue of plaster coating was collected and characterized. They were also selected raw materials of two ceramic poles of the state of Rio Grande do Norte and formulations have been made with the intention of obtaining those with the best physical and mechanical properties, the residue was added the percentage of 5%, 10%, 15%, 20%, 25% and 30%, in the best formulation of ceramic industry 1 and, according the properties analyses, 5%, 10% and 15% as the best results of ceramic industry 2. The samples were sintered at temperatures of 850 ºC, 950 °C and 1050 °C, the heating rate of 5 ºC / min with isotherm of two hours. They were submitted to testing technology, such as lineal shrinkage, water absorption, apparent porosity, apparent density and bending resistence. The residue incorporation best results in the formulations of mass in red ceramic, were observed between the temperatures of 850 ºC and 950 ºC, in those formulations that have illite clays and medium plastic in their composition, in the range of 0% to 15% residue incorporated

Estudo do resíduo fosfogesso na formulação de uma pasta para revestimento interno de edifícios

Universidade Federal do Rio Grande do Norte

Otimização da síntese de nanopartículas para encapsulamento de princípios ativos aplicados em revestimento pós-colheita.

Polissacarídeos, como quitosana, são muito empregados para a obtenção de nanopartículas (NP), mas, a concentração e o tipo de ácido para solubilizar a quitosana pode influenciar na qualidade. Isto também influenciará na eficiência de encapsulação de princípios ativos, e.g., óleo essencial e polifenóis. Assim, para otimizar os parâmetros de síntese de NP, foram feitas análises de condutividade, tamanho de partículas e morfologia em diferentes concentrações de ácido acético e clorídrico (1,0%; 0,5% e 0,1%). Com as análises de condutividade, observou-se que há excesso de ácido na concentração de 1% e isto demanda mais adição de tripolifosfato de sódio (TPP). NP, com tamanho desejável em torno de 200 nm, podem ser obtida empregando menos ácido (0,1%) e também menor quantidade de TPP.

Analisi del non-equilibrio termico locale nella conduzione non-stazionaria in uno strato poroso

Lo scopo di questo lavoro di tesi si focalizza sullo studio, sia dal punto di vista analitico che da quello numerico, della conduzione del calore non stazionaria di un mezzo poroso rettangolare saturo di fluido. Per descrivere tale fenomeno sono state adoperate le equazioni di bilancio dell’energia modellate tramite la teoria del non-equilibrio termico locale, cioè una coppia di equazioni di bilancio dell’energia sia per la fase solida sia per la fase fluida, dipendenti l’una dall’altra in quanto legate dal termine generativo di interfase. La necessità di avere due equazioni di bilancio dell’energia è dovuta a una caratteristica importante dei processi di trasferimento del calore in una schiuma metallica. In questo elaborato verranno risolte numericamente le equazioni di biliancio dell’energia del non-equilibrio termico locale, tramite l’ausilio del programma di calcolo MATLAB e il suo solutore “pdepe”, indagando e proponendo una soluzione al “paradosso” introdotto da Vadazs* nel suo articolo. Tale paradosso si presenta quando si risolvono analiticamente le equazioni di bilancio dell’energia del non-equilibrio termico locale applicando due metodi differenti: il metodo di sostituzione delle variabili e il metodo di separazione delle variabili dipendenti. Dai risultati ottenuti da Vadasz emerge una discrepanza tra i due metodi in quanto uno dei due porta a predire un comportamento di equilibrio termico tra le due fasi a ogni istante di tempo, mentre l’altro predirebbe un comportamento di non-equilibrio termico locale tra le due fasi, particolarmente evidente nei primi istanti di tempo. Successivamente si è analizzato il problema di conduzione studiandone la variazione dei transitori termici del campo di temperatura della fase solida e dalla fase fluida al mutare dei parametri adimensionali che caratterizzano le equazioni di bilancio dell’energia nella sue forme adimensionalizzate.

Filtros de areia aplicados à irrigação localizada: teoria e prática

The application of sand filters in localized irrigation systems is recommended in the presence of organic and algae contamination. The proper design and maintenance of these equipments are essential to assure an effective water quality control, in order to reduce the emitters clogging, to keep its water application uniformity, and to prevent increasing in the system operation costs. Despite the existence of some references about design, operation and maintenance of these filters, they are dispersed, with not enough details to guarantee the optimization of its hydraulics structure design and the proper selection of porous media to be used. Therefore, the objective of this work was to report a current literature review, relating practical information with scientific knowledge. The content of this review would help to induce and intensify the research on this subject and to contribute so the operational functions for the equipment are reached. It is also expected to assist the improvement of the filtration and flushing processes in the agricultural irrigation and the development of original design procedures and the rational use of these devices.

Produção de alface hidropônica em três ambientes de cultivo

It was proposed to evaluate the hydroponic lettuce production, variety Vera, on inclined benches with channels of 100 mm, and Nutrient Film Technique, as answer to carbon dioxide application and evaporative cooling. There were five cycles of cultivation from March, 20th to April, 17th (C1); from May, 25th to June, 29th (C2); from July, 13th to August, 20th (C3); from August, 27th to October, 10th (C4); from December, 12th to January, 10th (C5). In three greenhouses were tested the following systems: (A1) without evaporative cooling air CO2 aerial injection, (A2) with CO2 aerial injection and without evaporative cooling and (A3) with CO2 aerial injection and pad-fan evaporative cooling system. The fresh and dry mass of leaves in grams, number of leaves and leaf area in square millimeter were evaluated. The completely randomized statistical analysis was used. The cycle C1 were used 48 replications, for cycles C2, C3 and C5 were used 64 replications and C5 were used 24 replications. The results showed that greenhouse with evaporative cooling system and CO2 allow better development and greater lettuce yield. It was possible to conclude that the aerial injection of CO2, in the absence of evaporative cooling system, did not lead increasing the lettuce productivity to most cycles. Bigger lettuce leaf areas were found in periods with higher temperatures.

Fundações de construções submetidas a esforços de tração em solo de alta porosidade da região de Campinas - SP

This paper presents the behavior of three bored piles conducted in diabasic soil submitted to uplift forces. The piles were built at the site for Experimental Studies in Soil Mechanics and Foundations of UNICAMP, located in the city of Campinas, Brazil. Field tests have already been conducted at the site (SPT, CPT, DMT and PMT), as well as laboratory tests by using sample soils taken from a well up to 17 m deep. The water table is not checked until a depth of 17 m. In order to check the behavior of the piles when submitted to uplift forces, slow static load tests were carried out as the recommendations of NBR 12131. The carrying capacity of these piles was also provided by means of theoretical methods, appropriate for uplift forces, and through semi-empirical methods appropriate for compression forces, considering only the portion of lateral resistance. The values estimated by using the considered methods were compared to those obtained by means of load tests. One of the tested piles was extracted from the soil to be the subject of a study on its geometry.

Flora arbórea da bacia do rio Tibagi (Paraná, Brasil): Celastrales sensu Cronquist

A study of the tree species of the order Celastrales sensu Cronquist from the Tibagi river basin, Paraná state, Brazil, is presented, based on herbarium material. This basin is subdivided into three zones, from north to south: lower Tibagi (BT), mid Tibagi (MT) and upper Tibagi (AT), each with different environmental conditions and vegetation types. The order Celastrales is represented in the basin by 15 tree species belonging to three families: Aquifoliaceae, Celastraceae and Icacinaceae. Icacinaceae has only two species, Citronella gongonha and C. paniculata. The former is distinguished by a glabrous ovary and leaves that usually bear thorns. Aquifoliaceae has six species: Ilex brasiliensis, I. brevicuspis, I. chamaedryfolia, I. dumosa, I. paraguariensis and I. theezans. These species are found mainly in AT and MT and are distinguished by leaf size, indument, apices and margins, and by sepal features. Celastrales is represented by seven species and two genera; Plenckia populnea, a Brazilian savannah species found only in MT, and six species of Maytenus (M. evonymoides, M. robusta, M. dasyclada, M. salicifolia, M. ilicifolia and M. aquifolia) distinguished by leaf size and margins, branch shape and number of flowers per inflorescence.

Desidratação osmótica de abacaxi aplicada à tecnologia de métodos combinados

The aim of this research was to optimize osmotic dehydration of pineapple, according to two criteria: maximize water loss and minimize solid gain. The process was made as an application to Combined Methods Technology, in which three preservation factors were combined: water activity, pH and chemical preservatives, all being applied at low levels, in order to get a product resembling non-processed fruit. The experiment was divided into three treatments, being: non-coated pineapple pieces (A), pieces coated with alginate (B) and coated with low-methoxyl pectin (C). Process involved the following main steps: enzymatic inactivation of fruit pieces; in treatments B and C, incorporation of their respective coatings; and osmotic dehydration, in sucrose syrup containing potassium sorbate and citric acid. Optimum conditions, determined from Response Surface Methodology, were the following: dehydration of fruit pieces coated by alginate, at 42-47° C, in sucrose syrup at 66-69° Brix, for 220 to 270 minutes. Results indicated that both coatings significantly affected the mass transfers of the process, reducing solid incorporation and increasing water loss; therefore, increasing weight loss and performance ratio (water loss: solid incorporation) took place. Water activity was not significantly affected by the coatings. The product obtained under optimum conditions was submitted to sensorial evaluation, and presented a good general acceptance. Moulds and yeasts countings indicated good microbiological stability of the product for at least 60 days at 30ºC.

Retention force of T-bar clasps for titanium and cobalt-chromium removable partial dentures

The objective of this study was to evaluate the retention force of T-bar clasps made from commercially pure titanium (CP Ti) and cobalt-chromium (Co-Cr) alloy by the insertion/removal test simulating 5 years use. Thirty-six frameworks were cast from CP Ti (n=18) and Co-Cr alloy (n=18) with identical prefabricated patterns on refractory casts from a distal extension mandibular hemi-arch segment. The castings were made on a vacuum-pressure machine, under vacuum and argon atmosphere. Each group was subdivided in three, corresponding to 0.25 mm, 0.50 mm and 0.75 mm undercuts, respectively. No polishing procedures were performed to ensure uniformity. The specimens were subjected to an insertion/removal test and data was analyzed statistically to compare CP Ti and Co-Cr alloy in the same undercut (Student's t-test for independent samples) and each material in different undercuts (one-way ANOVA) (p=0.05). Comparisons between materials revealed significant differences (p=0.017) only for the 0.50-mm undercut. No significant differences (p>0.05) were found when comparing the same material for the undercuts. It may be concluded that for different undercuts, both Co-Cr alloy and CP Ti had no significant differences for T-bar clasps; CP Ti showed the lowest retention force values when compared to Co-Cr alloy in each undercut, but with significant difference only for the 0.50-mm undercut; and both materials maintained the retentive capacity during the simulation test.

Papiloma invertido (Papiloma Schneideriano) com envolvimento da cavidade oral: relato de caso incomum

O papiloma invertido schneideriano é uma neoplasia de origem no epitélio de revestimento que surge da mucosa respiratória revestindo a cavidade nasal e os seios paranasais. Frequentemente, surge como uma lesão unilateral no septo nasal e estende-se secundariamente para o nariz e os seios paranasais. Este trabalho relata um caso incomum desta patologia, com o envolvimento da cavidade oral em um homem branco, de 61 anos de idade, cuja avaliação clínica revelou uma massa vegetante no rebordo alveolar direito da maxila, com duração de aproximadamente 4 meses. Após avaliação radiográfica, constatouse o envolvimento do seio maxilar. A análise microscópica, hibridização in situ e análise imunoistoquímica da peça cirúrgica levaram a um diagnóstico de displasia moderada em PIS associado à infecção por HPV

Dose de exposição radiométrica de granitos do estado de Rondônia, Brasil

Este trabalho avaliou a concentração dos radioelementos K, eU e eTh em amostras de granitos do Estado de Rondônia, Brasil. A análise estatística dos dados obtidos indicou que eles seguem distribuições lognormais. Os valores modais encontrados correspondem a cerca de 11% para K, 29 ppm para eU e 85 ppm para eTh. Correlações diretas significativas foram determinadas entre as concentrações dos três radioelementos, isto é, r = 0,71 (entre K e eU), r = 0,72 (entre K e eTh)e r = 0,72 (entre eU e eTh), sugerindo que são congruentes os processos de seu acúmulo nos minerais das rochas analisadas. Os dados de concentração permitiram estimar a taxa de dose absorvida de radiação no ar acima de 1 m do nível do terreno, a qual também segue uma distribuição lognormal, com valor modal de 2,7 mSv/ano, que é ligeiramente superior à média global de 2,4 mSv/ano. Os resultados obtidos também permitiram avaliar, do ponto de vista radiométrico, se os granitos analisados são adequados para emprego como revestimento em construção civil.

Evaluation of capillaries with different inner coatings for DNA analysis using dilute polymer solutions by capillary electrophoresis

In this work three capillary columns, one with uncoated inner wall and two with covalently-bound internal coatings - poly(vinyl alcohol) (PVA) and poly(dimethylacrylamide) (PDMA) - both covalently covered - were used to separate DNA fragments and compared to DNA separation using replaceable polymer solutions. The separations were performed using hydroxyethylcellulose (HEC) (90-105 kDa) in concentrations ranging from 0.00 to 2.00% m/v. The results indicated that the separation efficiency was higher in the PVA capillary than in the PDMA in all evaluated concentrations of HEC. In addition, higher resolution was also observed in PVA-coated capillary since in PDMA the shape of the peaks was not reproducible when subsequent runs were performed. Contrary to what has previously been reported in the literature, no reasonable separation was possible in bare fused silica.

Achados clínico patológicos durante um surto de disenteria de inverno em bovinos no Rio Grande do Sul

Descreve-se um surto de disenteria de inverno que afetou 10 vacas leiteiras de uma propriedade localizada em Viamão, Rio Grande do Sul. O quadro clínico caracterizou-se por uma diarréia inicialmente líquida esverdeada com estrias de sangue e muco, evoluindo, em alguns animais, para uma diarréia de coloração marrom escura à sanguinolenta, que persistiu, em média, cinco dias. Drástica diminuição na produção de leite e no consumo de alimentos, além de graus variados de depressão também foram observados. Apenas um dos 10 animais afetados morreu. Durante a necropsia, observaram-se mucosas pálidas, conteúdo sanguinolento com presença de grande quantidade de coágulos, principalmente no cólon espiral e petéquias na mucosa do cólon. Os principais achados histológicos foram encontradas no cólon espiral, onde havia criptas dilatadas, sem epitélio de revestimento ou revestidas por epitélio pavimentoso e/ou cuboidal, por vezes com núcleos grandes e nucléolos proeminentes. Algumas criptas eram preenchidas por debris necróticos e polimorfonucleares. Na imuno-histoquímica com anticorpo monoclonal para coronavírus bovino (8F2) em cortes do cólon espiral, havia marcações positivas no citoplasma de enterócitos das criptas, nos debris necróticos destas e em macrófagos na lâmina própria.