Incorporação do lodo da estação de tratamento de água (ETA II) do município de Rio Claro-SP, na argila, para produção de cerâmica vermelha

The slugde from decanters in Water Treatment Plants (WTP) has different composition varying, according to the region, coagulant type and dosages, the plant layout. In this work, the physical characterization of the sludge generated from decenties (ETAII the municipality of Rio Claro, Brazil), the manufacture of bodies of evidence-sludge mixture of clay (with humidity of 8% and concentrations of sludge, 5, 15 and 30%) the testing technology after burning the mixture to a temperature of 950 ° C were investigated. The main aim assess the possibility of its use as raw material in the ceramic red production. For comparison of the obtained results it was used values of the testing technology of bodies of evidence only with clay, prepared under the same conditions. In general, the addition of sludge from ETA made worse the properties of the ceramic body, however, the values obtained from the tests on the concentration of 5% of sludge, still remain within the acceptable limits for the production of red pottery pieces.

Estudo da adição de resíduos de quartzitos para obtenção de grés porcelanato

In States of Paraíba (PB) and Rio Grande do Norte (RN), northeast of Brazil, the most significant deposits of non-metallic industrial minerals are pegmatites, quartzites and granites, which are located in Seridó region. Extraction of clay, quartz, micas and feldspars occurs mainly in the cities of Várzea (PB), OuroBranco (RN) and Parelhas (RN). Mining companies working in the extraction and processing of quartzite generate large volumes of waste containing about 90% SiO2 in their chemical composition coming from quartz that is one of the basic constituents of ceramic mass for the production of ceramic coating. Therefore, this work evaluates the utilization of these wastes on fabrication of high-quality ceramic products, such as porcelain stoneware, in industrial scale. Characterization of raw materials was based on XRF, XRD, GA, TGA and DSC analysis, on samples composed by 57% of feldspar, 37% of argil and 6% of quartzite residues, with 5 different colors (white, gold, pink, green and black). Samples were synthesized in three temperatures, 1150°C, 1200°C and 1250°C, with one hour isotherm and warming-up tax of 10°C/min. After synthesizing, the specimens were submit to physical characterization tests of water absorption, linear shrinkage, apparently porosity, density, flexural strain at three points. The addition of 6% of quartzite residue to ceramic mass provided a final product with technological properties attending technical norms for the production of porcelain stoneware; best results were observed at a temperature of 1200°C. According to the results there was a high iron oxide on black quartzite, being their use in porcelain stoneware discarded by ethic and structural question, because the material fused at 1250°C. All quartzite formulations had low water absorption when synthesized at 1200°C, getting 0.1% to 0.36% without having gone through the atomization process. Besides, flexural strain tests overcame 27 MPa reaching the acceptance limits of the European Directive EN 100, at 1200°C synthesizing. Thus, the use of quartzite residues in ceramic masses poses as great potential for the production of porcelain stoneware.

Desenvolvimento de cerâmica vermelha utilizando rejeitos da construção civil

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks

Influência do lodo de ETE na massa para fabricação de cerâmica vermelha

The WTP produce many kinds of residue on your treatment stages, but the sludge is the more problematic from the final disposition point view. The actual rate of residue production deriving from technological evolution and the crescent population needs prevents the subtle equilibrium generation between consumption and recycling/reuse, creating problems of pollution resulting from inappropriate management of residues. Thus, is necessary achieve a new equilibrium between the grow from raw materials and energy and the residue generation. This equilibrium should be achieved by technical and economic feasibility of environmental supported models through recycling and reuse. The red ceramic industry stand out in residue absorption question as raw material due their clay mass heterogeneity, constituted by clay minerals and non-clay minerals with wide mineralogical variation, allowing residue inclusion which act like plastic or non-plastic materials, contributing to retain heavy metals contained in residues in the vitreous mass formed during the burning of the ceramic bodies. This work propose the study of the influence of incorporation of 25 wt.% sludge from wastewater treatment plant, according preliminary results, in the mass to produce ceramic bodies. The raw materials was characterized through chemical composition analyses by XRF, mineralogical analyses by XRD, thermal analyses by TG and DTA, Atterberg limits and thermodilatometry. Subsequently was composed the mass with 75 wt.% of clay and 25 wt.% of dried wastewater sludge from UFRN WWTP. Samples with 6,0 x 2,0 x 0,5 cm was produced with unidirectional compacting under pressure of 20MPa and burned in temperatures between 950 and 1,200ºC. After fired, the ceramic bodies have been submitted to physical and mechanical analyses through the measure of firing shrinkage, water absorption, density, apparent porosity and flexural strength; crystallographic analyses through XRD and microstructure analyses by SEM. The technological properties obtained was satisfactory to production of roof tiles with 25 wt.% at 1,200 ºC, but the production of others products at lower temperatures was not feasible

Adição de cascalho de perfuração da bacia potiguar em argilas para uso em materiais cerâmicos: influência da concentração e temperatura de queima.

One of waste produced on large scale during the well drilling is the gravel drilling. There are techniques for the treatment of the same, but there isn t consensus on what are the best in terms of economic and environmental. One alternative for disposal of this waste and objective of this paper is the incorporation and immobilization of gravel clay matrix to assess their technological properties. The Raw Materials used were characterized by the following techniques: Chemical Analysis by X-ray fluorescence (XRF), mineralogical analysis by X-ray Diffraction (XRD), Grain Size Analysis (FA) and Thermal Analysis by Thermogravimetry (TG) and thermodiferential (DTA). After characterizing, samples were formulated in the following percentages: 0, 5, 10, 15, 25, 50, 75, 100% (weight) of gravel drilling, then the pieces were pressed, dried (110 ° C) and sintered at temperatures of 850, 950 and 1050 ° C. After sintering, samples were tested for water absorption, linear shrinkage, flexural strength, porosity, density, XRD and test color. The results concluded that the incorporation of gravel drilling is a viable possibility for solid masonry bricks and ceramic blocks manufacture at concentrations and firing temperature described here. Residue incorporation reduces an environmental problem, the cost of raw materials for manufacture of ceramic products

Estudo da incorporação de cascalho proveniente da perfuração de poços de petróleo em formulações para tijolos de solo-cimento

The present work is to study the characteristics and technological properties of soil-cement bricks made from binary and ternary mixtures of Portland cement, sand, water, with or without addition of gravel from the drilling of oil wells, which could be used by industry, aiming to improve its performance and reduce cost by using the residue and, consequently, increasing its useful life. The soil-cement bricks are one of the alternatives to masonry construction. These elements, after a short curing period, provide compressive strength similar to that of solid bricks and ceramic blocks, and the higher the resistance the higher the amount of cement used. We used the soil from the city of São José do Mipibu / RN, the banks of the River Baldun, cement CPIIZ-32 and residue of drill cuttings from oil wells drilling onshore wells in the town of Mossley, RN, provided Petrobras. To determine the optimum mix, we studied the inclusion of different residues (100%, 80%, 70%, 60% and 50%) where 15 bodies were made of the test piece. The assessment was made of bricks made from simple compression tests, mass loss by immersion and water absorption. The experimental results proved the efficiency and high utilization of the waste from the drilling of oil wells, making the brick-cement-soil residue with a higher strength and lower water absorption. The best result in terms of mechanical strength and water absorption for the ternary mixture was 10% soil, 14% cement and 80% residue. In terms of binary mixtures, we obtained the best result for the mix-cement residue, which was 14% cement incorporated in the residue

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Formulação de bloco intertravado cerâmico com adição de resíduos urbanos e industriais

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts

Avaliação da incorporação combinada dos resíduos de cascalho de perfuração de poço de petróleo e de polimento do porcelanato em cerâmica vermelha

Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation, as in the production of concrete and mortar for the construction, for example, but each one in an isolated way. In this research, the aim is to study the combined incorporation of the waste drill cuttings of oil well and the residue of the polishing of porcelain, generated in the final stage of finishing of this product in a clay matrix, for the production of red pottery, specifically bricks, ceramic blocks and tiles. The clay comes from the municipality of São Gonçalo, RN, the drilling waste is from the Natal basin, in Rio Grande do Norte, and the residue of the polishing proceeds from a ceramic porcelain of the State of Paraíba. For this purpose, we used a mixture of a plastic clay with a non-plastic, in a ratio of 50% each, settling formulations with the addition of these two residues in this clay matrix. In the formulations, both residues were incorporated with a minimum percentage of 2.5% and maximum of 12.5%, varying from 2.5% each, in each formulation, which the sum of the waste be no more than 15%. It should be noted that the residue of the polishing of ceramic porcelain is a IIa class (not inert). The materials were characterized by XRF, XRD, TG, DTA, laser granulometry and the plasticity index. The technological properties of water absorption, apparent porosity, linear shrinkage of burning, flexural tensile strength and bulk density were evaluated after the sintering of the pieces to 850 °C, 950 °C and 1050 °C, with a burning time of 3 hr, 3 hr and 30 minutes, and 3 hr and 50 minutes, respectively, with a heating rate of 10 °C/minute, for all formulations and landing of 30 minutes. To better understand the influence of each residue and temperature on the evaluated properties, we used the factorial planning and its surfaces of response for the interpretation of the results. It was found that the temperature has no statistical significance at a 95% of reliability level in flexural tensile strength and that it decreases the water absorption and the porosity, but increases the shrinkage and the bulk density. The results showed the feasibility of the desired incorporation, but adjusting the temperature to each product and formulation, and that the temperatures of 850 °C and 950 °C were the one that responded to the largest number of formulations

Extração e estrutura dos polissacarídeos do resíduo do café com atividade imunoestimuladora

As galactomananas das infusões de café apresentam atividade imunoestimuladora in vitro, sendo esta atividade semelhante à das mananas acetiladas extraídas de Aloe vera. As galactomananas presentes no resíduo de café também possuem atividade imunoestimuladora in vitro quando são parcialmente acetiladas. Como as galactomananas são o componente maioritário do resíduo de café e como o café é um produto de largo consumo a nível mundial, o reaproveitamento deste resíduo como fonte de galactomananas com atividade imunoestimuladora deve ser considerado. Esta dissertação procura dar resposta a duas questões: 1. Quais são as estruturas das galactomananas responsáveis pela atividade imunoestimuladora destes polissacarídeos; e 2. Como é que as galactomananas podem ser extraídas quantitativamente do resíduo de café de modo a serem solúveis em água à temperatura ambiente e, assim, poderem ser utilizadas como ingredientes alimentares com atividade imunoestimuladora. A questão 1 foi respondida pela caracterização estrutural de quatro galactomananas, de três origens: a) as galactomananas das infusões de café e do resíduo que apresentaram atividade imunoestimuladora; b) a galactomanana da goma de alfarroba (LBG), que não apresentou atividade imunoestimuladora; e c) a manana acetilada de Aloe vera, que apresentou atividade imunoestimuladora. Estes polissacarídeos foram submetidos à análise de açúcares e de ligações glicosídicas e a hidrólise por endo-β-D- (1→4)-mananase. Os fragmentos de oligossacarídeos mais pequenos foram ainda analisados por espetrometria de massa por ionização de electrospray e espetrometria de massa tandem. As galactomananas das infusões de café, do resíduo de café e do Aloe vera apresentaram grau de ramificação e peso molecular semelhantes, enquanto as galactomananas da LBG apresentaram grau de ramificação e de polimerização maiores. Todas as galactomananas apresentaram resíduos de arabinose como ramificação. O grau de acetilação das galactomananas da LBG foi vestigial enquanto as galactomananas do Aloe vera apresentaram um grau de acetilação de 2,08; para as galactomananas do resíduo de café o grau de acetilação foi de 0,98 e para as infusões foi de 0,08. A localização dos grupos acetilo foi irregular em todos os polímeros. Os resultados obtidos permitem inferir que baixos níveis de ramificação, cadeias pequenas e alguma acetilação parecem promover a atividade imunoestimuladora atribuída às galactomananas. Para responder à questão 2, foi testada uma metodologia que envolveu a torra do resíduo de café a 160 ºC e a 220 ºC e a sua extração com água quente e com soluções de 4 M NaOH à temperatura de 20, 60 e 120 ºC. A torra do resíduo a 160 ºC e a extração sequencial permitiu extrair 56% das galactomananas presentes no resíduo de café e, simultaneamente, 54% das arabinogalactanas. As galactomananas mantiveram a sua estrutura caraterística de polissacarídeo acetilado composto por uma cadeira principal de resíduos de manose em ligação β-(1→4) e resíduos de Gal e Ara nas cadeias laterais. A 220 ºC, as galactomananas foram parcialmente degradadas e o rendimento de extração foi muito menor do que a 160 ºC. No entanto, mesmo a esta temperatura as galactomananas apresentaram resíduos acetilados e a presença de pentoses nas cadeias laterais, o que permite inferir a elevada resistência destes polissacarídeos à temperatura e aos reagentes alcalinos. De forma a melhor compreender a estabilidade térmica das galactomananas do resíduo de café e a influência que a presença de arabinogalactanas pode ter na sua estabilidade, foi feita uma análise termogravimétrica aos polissacarídeos extraídos do resíduo de café assim como a polissacarídeos relacionados estruturalmente com estes, como a celulose, a galactomanana de LBG e a goma arábica, uma arabinogalactana. As galactomananas são termicamente estáveis durante 3 h a 200 ºC, enquanto as arabinogalactanas são estáveis a 180 ºC. De acordo com os perfis dos termogramas obtidos, e pelo cálculo das energias de ativação da degradação térmica, o resíduo de café apresenta uma estabilidade térmica menor do que a galactomanana, possivelmente devido à presença de arabinogalactanas. Apesar de não se ter verificado alterações no termograma da galactomanana do café submetida a um tratamento térmico de 200 ºC durante 3 h, verificam-se alterações estruturais que envolvem a formação de novas ligações glicosídicas, nomeadamente, a formação de resíduos de manose ligados em O-2 e em O-6, reações de transglicosilação, despolimerização, formação de resíduos de anidro-hexoses no terminal redutor e isomerização manose-glucose. Estas alterações promovem a solubilização das galactomananas. Os resultados obtidos permitem propor que o resíduo de café possa ser submetido a uma torra seguida de extração com reagentes alcalinos a quente para obtenção das galactomananas com rendimentos elevados. Estes polissacarídeos podem tornar-se solúveis em água após tratamento térmico a 200 ºC, permitindo assim a sua utilização em formulações alimentares, nomeadamente, por preparação de compostos acetilados com baixos níveis de ramificação e cadeias pequenas de modo a promover a sua atividade imunoestimuladora.

Utilização do resíduo de corte de granito (RCG) como adição para produção de concretos

Grande parte dos processos industriais são fontes geradoras de resíduos, na forma de gases, líquidos ou sólidos, provocando, quase sempre, degradação ambiental. A utilização de resíduos e subprodutos industriais na Construção Civil apresenta-se como uma excelente alternativa para diminuição do impacto ambiental causado, e maior contribuição para o desenvolvimento sustentável, considerando que a Construção Civil é o setor da atividade tecnológica que consome grande volume de recursos naturais e parece ser um dos mais indicado para absorver os resíduos sólidos. O resíduo gerado a partir do beneficiamento de rochas (resíduo de corte de granitos) é resultante do processo de serragem de blocos de rochas em placas, num equipamento denominado tear. Na serragem, cerca de 25% a 30% do bloco é transformado em pó, que na maioria dos casos, é depositado nos pátios das empresas. No Brasil, a quantidade estimada de geração deste resíduo é de 165000 toneladas por ano, sendo o Espírito Santo, Bahia, Ceará e Paraíba os estados que geram maior volume. Neste trabalho foi realizado a caracterização física, química e de risco ambiental do resíduo de corte de granito (RCG), bem como a avaliação do potencial de oxidação do Fe contido. Foi também realizada a viabilidade técnica do seu uso em concretos, com adição em teores de 10% e 20% em relação à massa de cimento. Para os concretos produzidos, foram avaliadas as propriedades do concreto endurecido (resistência à compressão axial, resistência à tração por compressão diametral e resistência à tração na flexão), e parâmetros de durabilidade (absorção por sucção capilar e absorção por imersão). A análise dos resultados permite concluir que o resíduo de corte de granito não apresenta riscos ambientais, que sua utilização como adição em concretos é viável tecnicamente, e que 10% de adição é o teor que apresenta melhor desempenho.

Estudo da introdução de resíduo de britagem de rocha calcária e cinza de biomassa de cana-de-açúcar em formulações de argamassas colantes

The adhesive mortars are a mixture of cement, sand, and additives to polymers that retain the mixing water and promotes adherence, being used in setting on various ceramic substrates. The sand used in the production of these mortars is from the riverbeds, and with the increasing restriction of these sands extraction by environmental agencies, and often having to be transported over long distances to the consumer center. This work aims to design and physical and mechanical characterization of ecological adhesive mortar with total replacement of natural sand by sand from the crushing of limestone, and the addition of mineral ash biomass of cane sugar in partial replacement cement used in the production of adhesive mortar , aiming compositions that meet the regulatory specifications for use adhesive mortar. Standardized tests to determine the tensile bond strength (NBR 14081-4), determination of open time (NBR 14081-3) and determination of slip (NBR 14081-5) were performed. Were also conducted trials squeeze flow in different formulation, the mortar with addition of 15 % gray biomass of cane sugar for cement mortars as well as the total replacement of natural sand by sand limestone crushing, got the best performance among the mortars studied, it was found that the addition of biomass to replace cement is perfectly feasible due to its pozzolanic activity, which contributed to this reduction in the cement matrix formation of adhesive mortar

Contribuição da inclusão de polpa cítrica e casca de soja para a qualidade da silagem de resíduo úmido de cervejaria

Com o objetivo de avaliar a produção da silagem e o uso de aditivos no processo de ensilagem do resíduo úmido de cervejaria, foram realizados 5 tratamentos: controle (C: ensilagem de 100% de resíduo úmido de cervejaria); PC15 (15% de polpa cítrica); PC30 (30% de polpa cítrica); CS15 (15% de casca de soja); CS30 (30% de casca de soja) – com base na matéria fresca do resíduo de cervejaria. As silagens foram confeccionadas em baldes plásticos com 252mm de altura e 245mm de diâmetro (0,06174m³), e amostras foram coletadas para análises bromatológicas, pH, nitrogênio amoniacal, digestão in vitro de matéria seca, ácidos orgânicos e perfil microbiológico. Os resultados foram analisados pelo programa computacional Statistical Analysis System (Statistical..., 1985), sendo verificada a normalidade dos resíduos pelo Teste de Shapiro-Wilk (PROC UNIVARIATE), e as variâncias, pelo Teste de Hartley. Os efeitos dos níveis de adição foram separados por meio de contrastes polinomiais utilizando o nível de significância de 5%. Houve aumento do teor de matéria seca, carboidratos solúveis, ácido lático, digestão in vitro de matéria seca, da população de bactérias ácido láticas e redução do pH, ácido butírico, propiônico e nitrogênio amoniacal a partir das inclusões de polpa cítrica e casca de soja, sendo os melhores resultados encontrados para o tratamento com inclusão de 30% de polpa cítrica (P<0,05). A ensilagem do bagaço de malte por si só é uma alternativa para o produtor rural como suporte alimentar e confecção de silagem de qualidade que pode ser incrementada com o uso de aditivos a serem avaliados de acordo com a relação custo-benefício para eficiência da produção

Casca de camarão para o controle de murcha de fusarium em gengibre.

2006

Estudo da extração e caracterização de compostos bioativos a partir de casca, farelo e arroz de variedades portuguesas

O arroz é o alimento básico para milhões de pessoas no Mundo inteiro. Como tal, o seu valor nutricional é algo de extrema importância. Contudo, ao seu processamento está associado um desperdício dos resíduos que advêm do seu descasque e branqueamento, o farelo e a casca. O principal objetivo deste trabalho consistiu no estudo do valor nutricional do grão de arroz e da valorização dos resíduos (farelo e casca) através da avaliação da atividade antioxidante. O estudo foi aplicado a três frações do bago de arroz: grão, farelo e casca, de três subvariedades diferentes: opale, ariete e ellebi. Foi avaliado o perfil de macronutrientes nas amostras de arroz, entre eles o teor de humidade, cinza, proteína e gordura. O grão foi a fração que apresentou maior teor de humidade, o farelo a que apresentou maior teor de gordura e proteína e a casca maior teor de cinza. Os compostos bioativos foram extraídos pelo método de extração sólido-liquido, usando como solvente uma mistura aquosa de metanol. A caracterização dos compostos antioxidantes dos extratos foi analisada através do teste da eliminação dos radicais livres de DPPH (2,2-difenil-1-picrilhidrazilo) e pelo método de Folin-Ciocalteau. Para a identificação dos compostos bioativos foi utilizada a técnica de UPLC-PDA (Cromatografia líquida de ultra eficiência - Detetor de matriz de Fotodíodos). A casca foi o extrato que continha uma maior capacidade antioxidante e um maior conteúdo de fenólicos totais (TPC), e o extrato do grão o que apresentou menor valor. Identicamente, foi na casca onde se conseguiu identificar um maior número de compostos, entre os quais se destacam os ácidos gentísico, isoferúlico, vanílico, elágico, p-cumárico e levulínico. A extração de compostos antioxidantes de farelo e casca de arroz demonstrou ser uma via bastante promissora para a valorização destes resíduos.