Effect of recombinant bovine somatotropin (bST) on follicular population and on in vitro buffalo embryo production

The objective of this study was to evaluate the effect of bovine somatotropin (bST) on ovarian follicular population in buffalo heifers and its influence on oocyte quality, recovery rates and in vitro embryo production. We tested the hypothesis that bST treatment in buffalo females submitted to an ovum pick-up (OPU) program Would improve the number of follicles recruited, oocyte quality and in vitro embryo production. A total of 10 heifers were assigned into two treatment groups: group bST (n = 5; receiving 500 mg of bST in regular intervals) and control group (n = 5; without additional treatment). Both groups were subjected to OPU sessions twice a week (every 3 or 4 days), for a total of 10 sessions per female, although due to procedural problems, only the first five OPU sessions produced embryos. The number of follicles and the diameters were recorded at all OPU sessions. The harvested oocytes were counted and classified according to their quality as either A, B, C, D or E, with A and B considered good quality. Cleavage and blastocyst production rates were evaluated 2 and 7 days after in vitro fertilization, respectively. The bST treatment increased the total number of antral follicles (> 3 mm in diameter; 12.2 compared with 8.7: p, < 0.05) and of small antral follicles (< 5 mm; 9.1 compared with 6.5; p < 0.05) per OPU session. The bST also tended to increase the number of oocytes recovered per session (5.2 compared with 4.1; p = 0.07), and enhanced the percentage of good quality oocytes (48.8% compared with 40.6%; p = 0.07), bST showed no effect on cleavage and blastocyst production rates (p > 0.05). The significant effects of performing repeated OPU sessions were decreasing the follicular population (p < 0.001) as well as the number of follicles aspirated (p < 0.001), and oocytes recovered (p < 0.02). In conclusion, bST treatment improves the follicular population, demonstrating its possible application in buffalo donors submitted to OPU programs. (c) 2008 Elsevier B.V. All rights reserved.

Differential behavioral and neuroendocrine effects of repeated nicotine in adolescent and adult rats

Despite the high prevalence of tobacco abuse among adolescents, the neurobiology of nicotine addiction has been studied mainly in adult animals. Repeated administration of this drug to adult rats induces behavioral sensitization. Nicotine activates the HPA axis in adult rats as measured by drug-induced increases in ACTH and corticosterone. Both behavioral sensitization and corticosterone are implicated in drug addiction. We examined the expression of behavioral sensitization induced by nicotine as well as the changes in corticosterone levels after repeated injections of nicotine in adolescent and adult animals. Adolescent and adult rats received subcutaneous (s.c.) injections of saline or 0.4 mg/kg of nicotine once daily for 7 days. Three days after the last injection animals were challenged with saline or nicotine (0.4 mg/kg; s.c.). Nicotine-induced locomotion was recorded in an activity cage. Trunk blood samples were collected in a subset of adolescent and adult rats and plasma corticosterone levels were determined by radioimmunoassay. Adult, but not adolescent, rats expressed behavioral sensitization. Pretreatment with nicotine abolished corticosterone-activating effect of this drug only in adult animals, indicating the development of tolerance at this age. Our results provide evidence that adolescent rats exposed to repeated nicotine display behavioral and neuroendocrine adaptations distinct from that observed in adult animals. (c) 2004 Elsevier B.V. All rights reserved.

Effect of cocaine on periadolescent rats with or without early maternal separation

Cocaine-induced behavioral sensitization and weight loss were investigated in periadolescent Wistar rats kept with their mothers or subjected to repeated maternal separation. Litters allocated to the separation procedure were placed in a temperature-controlled (33ºC) chamber for 3 h per day from postnatal day 6 (P6) to P20. Non-handled rats were left undisturbed until weaning. Treatments were started on P30-31 and the test was performed on P36-37. Animals received injections of saline or cocaine (10 mg/kg, sc) twice daily for 5 days. on day 6 all animals received saline. on day 7 animals were challenged with 10 mg/kg cocaine and their locomotion was evaluated in activity cages. A third group received saline throughout the 7-day period. Body weights were recorded on P30-31 and P36-37. Two-way ANOVA on body weights showed a main effect of treatment group (F(1,35) = 10.446, P = 0.003; N = 10-12). Non-handled rats treated with cocaine for 5 days gained significantly less weight, while no significant effect was observed in maternally separated rats. Two-way ANOVA revealed a main effect of drug treatment on locomotor activity (F(2,32) = 15.209, P<0.001; N = 6-8), but not on rearing condition (F(1,32)<0.001, P = 0.998). Animals pretreated with cocaine showed a clear behavioral sensitization relative to the saline group. No difference in the magnitude of sensitization was found between separated and non-handled animals. Only the effect of cocaine on weight gain was significantly affected by repeated episodes of early maternal separation during the pre-weaning period.

Effect of the Single or Combined Administration of Cocaine and Testosterone on Cardiovascular Function and Baroreflex Activity in Unanesthetized Rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Repeated administration of caffeine induces either sensitization or tolerance of locomotor stimulation depending on the environmental context

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determination of the sevoflurane sparing effect of methadone in cats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cholesterol reduction and lack of genotoxic or toxic effects in mice after repeated 21-day oral intake of lemongrass (Cymbopogon citratus) essential oil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of polymerization and accelerated aging on iris color stability of ocular prosthesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alteration of blue pigment in artificial iris in ocular prosthesis: Effect of paint, drying method and artificial aging

The artificial iris is the structure responsible for the dissimulation and aesthetics of ocular prosthesis. The objective of the present study was to evaluate the color stability of artificial iris of microwaveable polymerized ocular prosthesis, as a function of paint type, drying method and accelerated aging. A total of 40 discs of microwaveable polymerized acrylic resin were fabricated, and divided according to the blue paint type ( n = 5): hydrosoluble acrylic, nitrocellulose automotive, hydrosoluble gouache and oil paints. Paints where dried either at natural or at infrared light bulb method. Each specimen was constituted of one disc in colorless acrylic resin and another colored with a basic sclera pigment. Painting was performed in one surface of one of the discs. The specimens were submitted to an artificial aging chamber under ultraviolet light, during 1008 h. A reflective spectrophotometer was used to evaluate color changes. Data were evaluated by 3-way repeated-measures ANOVA and the Tukey HSD test (alpha = 0.05). All paints suffered color alteration. The oil paint presented the highest color resistance to artificial aging regardless of drying method. (C) 2010 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

Effect of addition of pigments and opacifier on the hardness, absorption, solubility and surface degradation of facial silicone after artificial ageing

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Misfit on Preload Maintenance of Retention Screws of Implant-Supported Prostheses

The aim of this study was to evaluate the effect of unilateral misfit at different levels on a crown-implant-retention screw system of implant-supported crowns. Hexagon castable UCLA abutments were cast in Co-Cr alloy to fabricate 48 metallic crowns divided into four groups (n = 12). Group A: crowns did not present misfit; Groups B, C and D: crowns were fabricated with unilateral misfit of 50, 100, and 200 mu m, respectively. The crowns were attached by titanium retention screw with 30 N/cm to external hexagonal osseointegrated implants embedded in acrylic resin. After 2 min, the retention screw of each replica was submitted to detorque evaluation by an analogic torque gauge. Three retention screws were used to perform detorque evaluation at each replica and the procedure was repeated twice with each screw. Each group was submitted to 72 detorque measurements. Data were evaluated by ANOVA and Tukey test (P < 0.05). All groups exhibited significant decrease (P < 0.05) in preload and the lowest decrease occurred in Group A. Groups B, C, and D were statistically significant different from Group A (P < 0.05), but there was no statistically significant difference between Groups B and D (P > 0.05). Crowns with unilateral misfit presented higher preload decrease than crowns completely fitted to osseointegrated implants.

Effect of salivary stimulation on erosion of human and bovine enamel subjected or not to subsequent abrasion: An in situ/ex vivo study

This in situ/ex vivo study evaluated whether saliva stimulated by chewing gum could prevent or reduce the wear and the percent change in microhardness (%SMH) of bovine and human enamel submitted to erosion followed by brushing abrasion immediately or after 1 h. During 2 experimental 7-day crossover phases, 9 previously selected volunteers wore intraoral palatal devices, with 12 enamel specimens (6 human and 6 bovine). In the first phase, the volunteers immersed the device for 5 min in 150 ml of cola drink, 4 times per day (at 8, 12, 16 and 20 h). Immediately after the immersions, no treatment was performed in 4 specimens, 4 other specimens were immediately brushed (0 min) using a fluoride dentifrice, and the device was replaced into the mouth. After 60 min, the remaining 4 specimens were brushed. In the second phase, the procedures were repeated, but after the immersions, the volunteers stimulated the salivary flow rate by chewing a sugar-free gum for 30 min. Changes in wear and %SMH were measured. ANOVA and Tukey's test showed statistical differences (p < 0.05) for the following comparisons. The chewing gum promoted less wear and %SMH. A decreasing %SMH and an increasing enamel wear were observed in the following conditions: erosion only, 60 min and 0 min. The human enamel presented greater %SMH and less wear compared to bovine enamel. The data suggest that the salivary stimulation after an erosive or erosive/abrasive attack can reduce the dental wear and the %SMH.

HARDNESS and SURFACE ROUGHNESS of RELINE and DENTURE BASE ACRYLIC RESINS AFTER REPEATED DISINFECTION PROCEDURES

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The GABAergic system contributes to the anxiolytic-like effect of essential oil from Cymbopogon citratus (lemongrass)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of adhesive system type and tooth region on the bond strength to dentin

Purpose: This study evaluated the bond strength of two etch-and-rinse adhesive systems (two- and three-step) and a self-etching system to Coronal and root canal dentin.Materials and Methods: The root canals of 30 human incisors and canines were instrumented and prepared with burs. The posts used for luting were duplicated with dual resin cement (Duo-link) inside Aestheti Plus #2 molds. Thus, three groups were formed (n = 10) according to the adhesive system employed: All-Bond 2 (TE3) + resin cement post (rcp) + Duo-link (DI); One-Step Plus (TE2) + rcp + DI; Tyrian/One-Step Plus (SE) + rcp + DI. Afterwards, 8 transverse sections (1.5 mm) were cut from 4 mm above the CEJ up to 4 mm short of the root canal apex, comprising coronal and root canal dentin. The sections were submitted to push-out testing in a universal testing machine EMIC (1 mm/min). Bond strength data were analyzed with two-way repeated measures ANOVA and Tukey's test (p < 0.05).Results: The relationship between the adhesives was not the same in the different regions (p < 0.05). Comparison of the means achieved with the adhesives in each region (Tukey; p < 0.05) revealed that TE3 (mean standard deviation: 5.22 +/- 1.70) was higher than TE2 (2.60 +/- 1.74) and SE (1.68 +/- 1.85).Conclusion: Under the experimental conditions, better bonding to dentin was achieved using the three-step etch-and-rinse system, especially in the coronal region. Therefore, the traditional etch-and-rinse three-step adhesive system seems to be the best choice for teeth needing adhesive endodontic restorations.