Determinant factors to discriminate the body weight loss in overweight people

Introduction. Most studies have described how the weight loss is when different treatments are compared (1-3), while others have also compared the weight loss by sex (4), or have taken into account psychosocial (5) and lifestyle (6, 7) variables. However, no studies have examined the interaction of different variables and the importance of them in the weight loss. Objective. Create a model to discriminate the range of weight loss, determining the importance of each variable. Methods. 89 overweight people (BMI: 25-29.9 kg?m-2), aged from 18 to 50 years, participated in the study. Four types of treatments were randomly assigned: strength training (S), endurance training (E), strength and endurance training (SE), and control group (C). All participants followed a 25% calorie restriction diet. Two multivariate discriminant models including the variables age, sex, height, daily energy expenditure (EE), type of treatment (T), caloric restriction (CR), initial body weight (BW), initial fat mass (FM), initial muscle mass (MM) and initial bone mineral density (BMD) were performed having into account two groups: the first and fourth quartile of the % of weight loss in the first model; the groups above and below the mean of the % of weight loss in the second model. The discriminant models were built using the inclusion method in SPSS allowing us to find a function that could predict the body weight loss range that an overweight person could achieve in a 6 months weight loss intervention.Results. The first discriminant analysis predicted that a combination of the studied variables would discriminate between the two ranges of body weight loss with 81.4% of correct classification. The discriminant function obtained was (Wilks? Lambda=0.475, p=0.003): Discriminant score=-18.266-(0.060xage)- (1.282xsex[0=female;1=male])+(14.701xheight)+(0.002xEE)- (0.006xT[1=S;2=E;3=SE;4=C])-(0.047xCR)- (0.558xBW)+(0.475xFM)+(0.398xMM)+(3.499xBMD) The second discriminant model obtained would discriminate between the two groups of body weight loss with 74.4% of correct classification. The discriminant function obtained was (Wilks? Lambda=0.725, p=0.005): Discriminant score=-5.021-(0.052xage)- (0.543xsex[0=female;1=male])+(3.530xheight)+(0.001xEE)- (0.493xT[1=S;2=E;3=SE;4=C])+(0.003xCR)- (0.365xBW)+(0.368xFM)+(0.296xMM)+(4.034xBMD) Conclusion. The first developed model could predict the percentage of weight loss in the following way: if the discriminant score is close to 1.051, the range of weight loss will be from 7.44 to -4.64% and if it is close to - 1.003, the range will be from -11.03 to -25,00% of the initial body weight. With the second model if the discriminant score is close to 0.623 the body weight loss will be above -7.93% and if it is close to -0.595 will be below - 7.93% of the initial body weight. References. 1. Brochu M, et al. Resistance training does not contribute to improving the metabolic profile after a 6-month weight loss program in overweight and obese postmenopausal women. J Clin Endocrinol Metab. 2009 Sep;94(9):3226-33. 2. Del Corral P, et al. Effect of dietary adherence with or without exercise on weight loss: a mechanistic approach to a global problem. J Clin Endocrinol Metab. 2009 May;94(5):1602-7. 3. Larson-Meyer DE, et al. Caloric Restriction with or without Exercise: The Fitness vs. Fatness Debate. Med Sci Sports Exerc. 2010;42(1):152-9. 4. Hagan RD, et al. The effects of aerobic conditioning and/or caloric restriction in overweight men and women. Medicine & Science in Sports & Exercise. 1986;18(1):87-94. 5. Teixeira PJ, et al. Mediators of weight loss and weight loss maintenance in middle-aged women. Obesity (Silver Spring). 2010 Apr;18(4):725-35. 6. Bautista-Castano I, et al. Variables predictive of adherence to diet and physical activity recommendations in the treatment of obesity and overweight, in a group of Spanish subjects. Int J Obes Relat Metab Disord. 2004 May;28(5):697-705.

Modelo de comportamiento plástico y rotura en aleaciones de solidificación direccional

Esta investigación presenta un modelo de material para aleaciones de solidificación direccional que poseen un comportamiento mecánico transversalmente isótropo. Se han realizado una serie de ensayos de tracción sobre probetas cilíndricas a varias velocidades de deformación y a varias temperaturas sobre la superaleación de base níquel de solidificación direccional MAR-M 247 con objeto de conocer su comportamiento mecánico. Los ensayos se realizaron sobre probetas cilíndricas cuya dirección longitudinal forma 0º y 90º con la de la orientación de crecimiento de los granos. Para representar el comportamiento plástico anisótropo se ha formulado una función de plastificación de forma no cuadrática basada en la transformación lineal de tensores. Con el propósito de simplificar en todo lo posible el modelo se ha considerado un endurecimiento isótropo. Para probar la validez del modelo propuesto se ha implementado el mismo como modelo de material definido por el usuario en el código no lineal de elementos finitos LS-DYNA. In this research a material model for directionally solidified alloys with transversely isotropic mechanic behavior is presented. In order to characterize the mechanical behavior of the Mar-M 247 directionally solidified nickel based superalloy, tensile tests of axisymmetric smooth specimens were performed at various strain rates and temperatures. The specimens were machined making sure that the longitudinal axis of them was forming 0º and 90º with the grain growth orientation. To represent the plastic flow, a non-quadratic anisotropic function based on linear transformation of tensors has been formulated. For the sake of simplicity isotropic strain hardening of the material has been considered. To prove the validity of the model, a material subroutine has been implemented in LS-DYNA non-linear finite element code as a user defined material model.

Applied Research “Specializers”Versus “Samplers” in Youth Sport: Comparing Experiences and Outcomes

The purpose of the current study was to examine two different trajectories of sport participation and explore any similarities or differences that may result regarding per­sonal development and sport outcomes. Seventy-four youth athletes (40 “specializ­ers” and 34 “samplers”) were recruited for the current study and four measures were employed to assess sport experiences and outcomes. Discriminant function analyses revealed no differences between groups in asset possession or sources of enjoyment however, differences were reported in sport experiences and burnout. The “samplers” reported more experiences regarding the integration of sport and family as well as linkages to the community. Although the “specializers” reported higher levels of physical/emotional exhaustion than did the “samplers,” they also reported more expe­riences related to diverse peer groups. The differences highlight the importance of examining specific pathways of development in sport to gain a deeper understanding of youths’ experiences in sport.

Factors associated with the wish to hasten death: a study of patients with terminal illness

Background. There is considerable debate regarding the clinical issues surrounding the wish to hasten death (WTHD) in the terminally ill. The clinical factors contributing to the WTHD need further investigation among the terminally ill in order to enhance understanding of the clinical assessment and treatment needs that underlie this problem. A more detailed understanding may assist with the development of appropriate therapeutic interventions. Method. A sample of terminally ill cancer patients (N=256) recruited from an in-patient hospice unit, home palliative care service and a general hospital palliative care consulting service from Brisbane Australia between 1998-2001 completed a questionnaire assessing psychological (depression and anxiety), social (family relationship, social support, level of burden on others) and the impact of physical symptoms. The association between these factors and the WTHD was investigated. Results. A high WTHD was reported by 14% of patients. A discriminant function analysis revealed that the following variables were associated with a high WTHD (P

Comparative habitat use in Juniper woodland bird community

We compared vegetation structure used by 14 bird species during the 1998 and 1999 breeding seasons to determine what habitat features best accounted for habitat division and community organization in Utah juniper (Juniperus osteosperma) woodlands of southwestern Wyoming. Habitat use was quantified by measuring 24 habitat variables in 461 bird-centered quadrats, each 0.04 ha in size. Using discriminant function analysis, we differentiated between habitat used by 14 bird species along 3 habitat dimensions: (1) variation in shrub cover, overstory juniper cover, mature tree density, understory height, and decadent tree density; (2) a gradient composed of elevation and forb cover; and (3) variation in grass cover, tree height, seedling/sapling cover, and bare ground/rock cover. Of 14 species considered, 9 exhibited substantial habitat partitioning: Mourning Dove (Zenaida macroura), Bewick's Wren (Thryomanes bewickii), Blue-gray Gnatcatcher (Polioptila caerulea), Mountain Bluebird (Sialia currucoides), Plumbeous Vireo (Vireo plumbeus), Green-tailed Towhee (Pipilo chlorurus), Brewer's Sparrow (Spizella breweri), Dark-eyed Junco (Junco hyemalis), and Cassin's Finch (Carpodacus cassinii). Our results indicate juniper bird communities of southwestern Wyoming are organized along a 3-dimensional habitat gradient composed of woodland maturity, elevation, and juniper recruitment. Because juniper birds partition habitat along successional and altitudinal gradients, indiscriminate woodland clearing as well as continued fire suppression will alter species composition. Restoration efforts should ensure that all successional stages of juniper woodland are present on the landscape.

Use of X-radiographs to distinguish members of the Montastraea annularis reef-coral species complex

Recent work suggests the Montastraea annularis species complex consists of at least three species, which can be distinguished qualitatively in the field using features related to colony growth (e.g. overall growth form. bumpiness, growth along the colony edge). However, when whole colonies are not available and surfaces are eroded, identification becomes problematic when relying on such characteristics. Characters based on internal skeletal structures are less prone to loss due to taphonomic processes. Previous work has shown that internal corallite architectural features measured in transverse thin sections can be used to distinguish species. To determine whether internal colony-level features measured on X-radiographs can be used. eight characters related to corallite budding and accretionary growth were measured on specimens representing three modern members of the M. annularis species complex (M. annularis, M. flaveolata and M. franksi), as well as two fossil forms (columnar and organ-pipe). All eight characters showed significant differences among species. Discriminant function analysis using seven of these characters resulted in distinct species groupings In canonical scores plots and a 100% classification success for specimens from Panama. These results suggest that measurements made on X-radiographs provide a useful tool for quantitatively distinguishing members of the M. annularis complex as well as between other massive reef corals.

Geographic variation in vocalisations of Satin Bowerbirds, Ptilonorynchus violaceus, in south-eastern Queensland

Geographic variation in the advertisement call of the male Satin Bowerbird, Ptilonorhynchus violaceus, was investigated in three populations in south-eastern Queensland. The call was found to differ significantly among the three geographically distinct populations. A discriminant function analysis using five measurements of call frequency and duration provided 100% classification success of the 25 individuals. The observed geographic variation in this call may result from adaptation to the local acoustic environment in these populations, or from genetic or cultural divergence among populations. Further research involving the acoustic properties of the habitats, population genetics and a larger number of populations is required to fully understand this pattern of call variation.

Multiparametric evaluation of dysphonic severity

In recent years, the multiparametric approach for evaluating perceptual rating of voice quality has been advocated. This study evaluates the accuracy of predicting perceived overall severity of voice quality with a minimal set of aerodynamic, voice range profile (phonetogram), and acoustic perturbation measures. One hundred and twelve dysphonic persons (93 women and 19 men) with laryngeal pathologies and 41 normal controls (35 women and six men) with normal voices participated in this study. Perceptual severity judgement was carried out by four listeners rating the G (overall grade) parameter of the GRBAS scale.(1) The minimal set of instrumental measures was selected based on the ability of the measure to discriminate between dysphonic and normal voices, and to attain at least a moderate correlation with perceived overall severity. Results indicated that perceived overall severity was best described by maximum phonation time of sustained /a/, peak intraoral pressure of the consonant-vowel /pi/ strings production, voice range profile area, and acoustic jitter. Direct-entry discriminant function analysis revealed that these four voice measures in combination correctly predicted 67.3% of perceived overall severity levels.

Psychometric assessment of recovery from mild traumatic brain injury

The Rapid Screen of Concussion (RSC) is a brief psychometric test battery, designed to provide a functional criterion to aid clinical diagnosis of mild traumatic brain injury (mTBI). The present research aimed to examine the utility of this instrument for assessing recovery after mTBI. Three studies were conducted. In Study 1, Discriminant Function Analysis was performed to determine how well the RSC differentiated uninjured controls (N¼16), from mTBI patients (N¼22) and moderate to severe TBI patients (N¼14), several months post-injury. As predicted, moderate to severe TBI patients achieved lower scores than the mTBI and control groups. The RSC also successfully differentiated between each of the diagnostic groups, yielding an overall correct classification rate of 75%. Study 2 examined the predictive utility of the RSC in the mTBI sample (N¼22). Acute injury performance on the RSC was correlated with post-injury scores at an average of 5.5 months post-injury. Statistically significant partial correlation coefficients (r¼0.53r¼0.80) were found for each of the subtests, showing that low acute RSC scores were predictive of poor recovery scores on the RSC after mTBI. In the third study, Reliable Change Indices were calculated on the RSC subtests to examine individual patterns of recovery from mTBI. While 17 of the 23 participants made a significant improvement on their acute injury DSST scores (74%), only 13 of 25 made a significant improvement on the Rapid Sentence Judgement Test (52%), highlighting differential recovery of function, and challenging the notion of full recovery from mTBI within 3 months. These overall results offer support for the construct and predictive validity of the RSC and demonstrate that inexpensive tests of brain function may be useful for managing mTBI acutely for prognosis.

Quantifying evidence for forensic authorship analysis

The judicial interest in ‘scientific’ evidence has driven recent work to quantify results for forensic linguistic authorship analysis. Through a methodological discussion and a worked example this paper examines the issues which complicate attempts to quantify results in work. The solution suggested to some of the difficulties is a sampling and testing strategy which helps to identify potentially useful, valid and reliable markers of authorship. An important feature of the sampling strategy is that these markers identified as being generally valid and reliable are retested for use in specific authorship analysis cases. The suggested approach for drawing quantified conclusions combines discriminant function analysis and Bayesian likelihood measures. The worked example starts with twenty comparison texts for each of three potential authors and then uses a progressively smaller comparison corpus, reducing to fifteen, ten, five and finally three texts per author. This worked example demonstrates how reducing the amount of data affects the way conclusions can be drawn. With greater numbers of reference texts quantified and safe attributions are shown to be possible, but as the number of reference texts reduces the analysis shows how the conclusion which should be reached is that no attribution can be made. The testing process at no point results in instances of a misattribution.

A study of cluster analysis techniques and their applications

This thesis seeks to describe the development of an inexpensive and efficient clustering technique for multivariate data analysis. The technique starts from a multivariate data matrix and ends with graphical representation of the data and pattern recognition discriminant function. The technique also results in distances frequency distribution that might be useful in detecting clustering in the data or for the estimation of parameters useful in the discrimination between the different populations in the data. The technique can also be used in feature selection. The technique is essentially for the discovery of data structure by revealing the component parts of the data. lhe thesis offers three distinct contributions for cluster analysis and pattern recognition techniques. The first contribution is the introduction of transformation function in the technique of nonlinear mapping. The second contribution is the us~ of distances frequency distribution instead of distances time-sequence in nonlinear mapping, The third contribution is the formulation of a new generalised and normalised error function together with its optimal step size formula for gradient method minimisation. The thesis consists of five chapters. The first chapter is the introduction. The second chapter describes multidimensional scaling as an origin of nonlinear mapping technique. The third chapter describes the first developing step in the technique of nonlinear mapping that is the introduction of "transformation function". The fourth chapter describes the second developing step of the nonlinear mapping technique. This is the use of distances frequency distribution instead of distances time-sequence. The chapter also includes the new generalised and normalised error function formulation. Finally, the fifth chapter, the conclusion, evaluates all developments and proposes a new program. for cluster analysis and pattern recognition by integrating all the new features.

Vertical and horizontal scope economies in the regulated US electricity power industry

This paper investigates vertical economies between generation and distribution of electric power, and horizontal economies between different types of power generation in the U.S. electric utility industry. Our quadratic cost function model includes three generation output measures (hydro, nuclear and fossil fuels), which allows us to analyze the effect that generation mix has on vertical economies. Our results provide (sample mean) estimates of vertical economies of 8.1% and horizontal economies of 5.4%. An extensive sensitivity analysis is used to show how the scope measures vary across alternative model specifications and firm types. © 2012 Blackwell Publishing Ltd and the Editorial Board of The Journal of Industrial Economics.

Electronic commerce adoption:a study of business-to-business practice in Saudi Arabia

Electronic commerce (e-commerce) has become an increasingly important initiative among organisations. The factors affecting adoption decisions have been well-documented, but there is a paucity of empirical studies that examine the adoption of e-commerce in developing economies in the Arab world. The aim of this study is to provide insights into the salient e-commerce adoption issues by focusing on Saudi Arabian businesses. Based on the Technology-Organisational-Environmental framework, an integrated research model was developed that explains the relative influence of 19 known determinants. A measurement scale was developed from prior empirical studies and revised based on feedback from the pilot study. Non-interactive adoption, interactive adoption and stabilisation of e-commerce adoption were empirically investigated using survey data collected from Saudi manufacturing and service companies. Multiple discriminant function analysis (MDFA) was used to analyse the data and research hypotheses. The analysis demonstrates that (1) regarding the non-interactive adoption of e-commerce, IT readiness, management team support, learning orientation, strategic orientation, pressure from business partner, regulatory and legal environment, technology consultants‘ participation and economic downturn are the most important factors, (2) when e-commerce interactive adoption is investigated, IT readiness, management team support, regulatory environment and technology consultants‘ participation emerge as the strongest drivers, (3) pressure from customers may not have much effect on the non-interactive adoption of e-commerce by companies, but does significantly influence the stabilisation of e-commerce use by firms, and (4) Saudi Arabia has a strong ICT infrastructure for supporting e-commerce practices. Taken together, these findings on the multi-dimensionality of e-commerce adoption show that non-interactive adoption, interactive adoption and stabilisation of e-commerce are not only different measures of e-commerce adoption, but also have different determinants. Findings from this study may be valuable for both policy and practice as it can offer a substantial understanding of the factors that enhance the widespread use of B2B e-commerce. Also, the integrated model provides a more comprehensive explanation of e-commerce adoption in organisations and could serve as a foundation for future research on information systems.

Using Covariance as a Similarity Measure for Document Language Identification in Hard Contexts

2000 Mathematics Subject Classification: C2P99.