A telehealth system for Parkinson's disease remote monitoring. The PERFORM approach

This paper summarizes the experience and the lessons learned from the European project PERFORM (A sophisticated multi-parametric system FOR the continuous effective assessment and monitoring of motor status in Parkinson s disease and other neurodegenerative diseases). PERFORM is aimed to provide a telehealth system for the remote monitoring of Parkinson s disease patients (PD) at their homes. This paper explains the global experience with PERFORM. It summarizes the technical performance of the system and the feedback received from the patients in terms of usability and wearability.

Synchronizing sound from different devices over a TCP network

Nowadays, we can send audio on the Internet for multiples uses like telephony, broadcast audio or teleconferencing. The issue comes when you need to synchronize the sound from different sources because the network where we are going to work could lose packets and introduce delay in the delivery. This can also come because the sound cards could be work in different speeds. In this project, we will work with two computers emitting sound (one will simulate the left channel (mono) of a stereo signal, and the other the right channel) and connected with a third computer by a TCP network. The last computer must get the sound from both computers and reproduce it in a speaker properly (without delay). So, basically, the main goal of the project is to synchronize multi-track sound over a network. TCP networks introduce latency into data transfers. Streaming audio suffers from two problems: a delay and an offset between the channels. This project explores the causes of latency, investigates the affect of the inter-channel offset and proposes a solution to synchronize the received channels. In conclusion, a good synchronization of the sound is required in a time when several audio applications are being developed. When two devices are ready to send audio over a network, this multi-track sound will arrive at the third computer with an offset giving a negative effect to the listener. This project has dealt with this offset achieving a good synchronization of the multitrack sound getting a good effect on the listener. This was achieved thanks to the division of the project into several steps having constantly a good vision of the problem, a good scalability and having controlled the latency at all times. As we can see in the chapter 4 of the project, a lack of synchronization over c. 100μs is audible to the listener. RESUMEN. A día de hoy, podemos transmitir audio a través de Internet por varios motivos como pueden ser: una llamada telefónica, una emisión de audio o una teleconferencia. El problema viene cuando necesitas sincronizar ese sonido producido por los diferentes orígenes ya que la red a la que nos vamos a conectar puede perder los paquetes y/o introducir un retardo en las entregas de los mismos. Así mismo, estos retardos también pueden venir producidos por las diferentes velocidades a las que trabajan las tarjetas de sonido de cada dispositivo. En este proyecto, se ha trabajado con dos ordenadores emitiendo sonido de manera intermitente (uno se encargará de simular el canal izquierdo (mono) de la señal estéreo emitida, y el otro del canal derecho), estando conectados a través de una red TCP a un tercer ordenador, el cual debe recibir el sonido y reproducirlo en unos altavoces adecuadamente y sin retardo (deberá juntar los dos canales y reproducirlo como si de estéreo de tratara). Así, el objetivo principal de este proyecto es el de encontrar la manera de sincronizar el sonido producido por los dos ordenadores y escuchar el conjunto en unos altavoces finales. Las redes TCP introducen latencia en la transferencia de datos. El streaming de audio emitido a través de una red de este tipo puede sufrir dos grandes contratiempos: retardo y offset, los dos existentes en las comunicaciones entre ambos canales. Este proyecto se centra en las causas de ese retardo, investiga el efecto que provoca el offset entre ambos canales y propone una solución para sincronizar los canales en el dispositivo receptor. Para terminar, una buena sincronización del sonido es requerida en una época donde las aplicaciones de audio se están desarrollando continuamente. Cuando los dos dispositivos estén preparados para enviar audio a través de la red, la señal de sonido multi-canal llegará al tercer ordenador con un offset añadido, por lo que resultará en una mala experiencia en la escucha final. En este proyecto se ha tenido que lidiar con ese offset mencionado anteriormente y se ha conseguido una buena sincronización del sonido multi-canal obteniendo un buen efecto en la escucha final. Esto ha sido posible gracias a una división del proyecto en diversas etapas que proporcionaban la facilidad de poder solucionar los errores en cada paso dando una importante visión del problema y teniendo controlada la latencia en todo momento. Como se puede ver en el capítulo 4 del proyecto, la falta de sincronización sobre una diferencia de 100μs entre dos canales (offset) empieza a ser audible en la escucha final.

Desarrollo de un modelo de predimensionado de costes de construcción en el proyecto arquitectónico

El objetivo de la presente investigación es el desarrollo de un modelo de cálculo rápido, eficiente y preciso, para la estimación de los costes finales de construcción, en las fases preliminares del proyecto arquitectónico. Se trata de una herramienta a utilizar durante el proceso de elaboración de estudios previos, anteproyecto y proyecto básico, no siendo por tanto preciso para calcular el “predimensionado de costes” disponer de la total definición grafica y literal del proyecto. Se parte de la hipótesis de que en la aplicación práctica del modelo no se producirán desviaciones superiores al 10 % sobre el coste final de la obra proyectada. Para ello se formulan en el modelo de predimensionado cinco niveles de estimación de costes, de menor a mayor definición conceptual y gráfica del proyecto arquitectónico. Los cinco niveles de cálculo son: dos que toman como referencia los valores “exógenos” de venta de las viviendas (promoción inicial y promoción básica) y tres basados en cálculos de costes “endógenos” de la obra proyectada (estudios previos, anteproyecto y proyecto básico). El primer nivel de estimación de carácter “exógeno” (nivel .1), se calcula en base a la valoración de mercado de la promoción inmobiliaria y a su porcentaje de repercusión de suelo sobre el valor de venta de las viviendas. El quinto nivel de valoración, también de carácter “exógeno” (nivel .5), se calcula a partir del contraste entre el valor externo básico de mercado, los costes de construcción y los gastos de promoción estimados de la obra proyectada. Este contraste entre la “repercusión del coste de construcción” y el valor de mercado, supone una innovación respecto a los modelos de predimensionado de costes existentes, como proceso metodológico de verificación y validación extrínseca, de la precisión y validez de las estimaciones resultantes de la aplicación práctica del modelo, que se denomina Pcr.5n (Predimensionado costes de referencia con .5niveles de cálculo según fase de definición proyectual / ideación arquitectónica). Los otros tres niveles de predimensionado de costes de construcción “endógenos”, se estiman mediante cálculos analíticos internos por unidades de obra y cálculos sintéticos por sistemas constructivos y espacios funcionales, lo que se lleva a cabo en las etapas iniciales del proyecto correspondientes a estudios previos (nivel .2), anteproyecto (nivel .3) y proyecto básico (nivel .4). Estos cálculos teóricos internos son finalmente evaluados y validados mediante la aplicación práctica del modelo en obras de edificación residencial, de las que se conocen sus costes reales de liquidación final de obra. Según va evolucionando y se incrementa el nivel de definición y desarrollo del proyecto, desde los estudios previos hasta el proyecto básico, el cálculo se va perfeccionando en su nivel de eficiencia y precisión de la estimación, según la metodología aplicada: [aproximaciones sucesivas en intervalos finitos], siendo la hipótesis básica como anteriormente se ha avanzado, lograr una desviación máxima de una décima parte en el cálculo estimativo del predimensionado del coste real de obra. El cálculo del coste de ejecución material de la obra, se desarrolla en base a parámetros cúbicos funcionales “tridimensionales” del espacio proyectado y parámetros métricos constructivos “bidimensionales” de la envolvente exterior de cubierta/fachada y de la huella del edificio sobre el terreno. Los costes funcionales y constructivos se ponderan en cada fase del proceso de cálculo con sus parámetros “temáticos/específicos” de gestión (Pg), proyecto (Pp) y ejecución (Pe) de la concreta obra presupuestada, para finalmente estimar el coste de construcción por contrata, como resultado de incrementar al coste de ejecución material el porcentaje correspondiente al parámetro temático/especifico de la obra proyectada. El modelo de predimensionado de costes de construcción Pcr.5n, será una herramienta de gran interés y utilidad en el ámbito profesional, para la estimación del coste correspondiente al Proyecto Básico previsto en el marco técnico y legal de aplicación. Según el Anejo I del Código Técnico de la Edificación (CTE), es de obligado cumplimiento que el proyecto básico contenga una “Valoración aproximada de la ejecución material de la obra proyectada por capítulos”, es decir , que el Proyecto Básico ha de contener al menos un “presupuesto aproximado”, por capítulos, oficios ó tecnologías. El referido cálculo aproximado del presupuesto en el Proyecto Básico, necesariamente se ha de realizar mediante la técnica del predimensionado de costes, dado que en esta fase del proyecto arquitectónico aún no se dispone de cálculos de estructura, planos de acondicionamiento e instalaciones, ni de la resolución constructiva de la envolvente, por cuanto no se han desarrollado las especificaciones propias del posterior proyecto de ejecución. Esta estimación aproximada del coste de la obra, es sencilla de calcular mediante la aplicación práctica del modelo desarrollado, y ello tanto para estudiantes como para profesionales del sector de la construcción. Como se contiene y justifica en el presente trabajo, la aplicación práctica del modelo para el cálculo de costes en las fases preliminares del proyecto, es rápida y certera, siendo de sencilla aplicación tanto en vivienda unifamiliar (aisladas y pareadas), como en viviendas colectivas (bloques y manzanas). También, el modelo es de aplicación en el ámbito de la valoración inmobiliaria, tasaciones, análisis de viabilidad económica de promociones inmobiliarias, estimación de costes de obras terminadas y en general, cuando no se dispone del proyecto de ejecución y sea preciso calcular los costes de construcción de las obras proyectadas. Además, el modelo puede ser de aplicación para el chequeo de presupuestos calculados por el método analítico tradicional (estado de mediciones pormenorizadas por sus precios unitarios y costes descompuestos), tanto en obras de iniciativa privada como en obras promovidas por las Administraciones Públicas. Por último, como líneas abiertas a futuras investigaciones, el modelo de “predimensionado costes de referencia 5 niveles de cálculo”, se podría adaptar y aplicar para otros usos y tipologías diferentes a la residencial, como edificios de equipamientos y dotaciones públicas, valoración de edificios históricos, obras de urbanización interior y exterior de parcela, proyectos de parques y jardines, etc….. Estas lineas de investigación suponen trabajos paralelos al aquí desarrollado, y que a modo de avance parcial se recogen en las comunicaciones presentadas en los Congresos internacionales Scieconf/Junio 2013, Rics‐Cobra/Septiembre 2013 y en el IV Congreso nacional de patología en la edificación‐Ucam/Abril 2014. ABSTRACT The aim of this research is to develop a fast, efficient and accurate calculation model to estimate the final costs of construction, during the preliminary stages of the architectural project. It is a tool to be used during the preliminary study process, drafting and basic project. It is not therefore necessary to have the exact, graphic definition of the project in order to be able to calculate the cost‐scaling. It is assumed that no deviation 10% higher than the final cost of the projected work will occur during the implementation. To that purpose five levels of cost estimation are formulated in the scaling model, from a lower to a higher conceptual and graphic definition of the architectural project. The five calculation levels are: two that take as point of reference the ”exogenous” values of house sales (initial development and basic development), and three based on calculation of endogenous costs (preliminary study, drafting and basic project). The first ”exogenous” estimation level (level.1) is calculated over the market valuation of real estate development and the proportion the cost of land has over the value of the houses. The fifth level of valuation, also an ”exogenous” one (level.5) is calculated from the contrast between the basic external market value, the construction costs, and the estimated development costs of the projected work. This contrast between the ”repercussions of construction costs” and the market value is an innovation regarding the existing cost‐scaling models, as a methodological process of extrinsic verification and validation, of the accuracy and validity of the estimations obtained from the implementation of the model, which is called Pcr.5n (reference cost‐scaling with .5calculation levels according to the stage of project definition/ architectural conceptualization) The other three levels of “endogenous” construction cost‐scaling are estimated from internal analytical calculations by project units and synthetic calculations by construction systems and functional spaces. This is performed during the initial stages of the project corresponding to preliminary study process (level.2), drafting (level.3) and basic project (level.4). These theoretical internal calculations are finally evaluated and validated via implementation of the model in residential buildings, whose real costs on final payment of the works are known. As the level of definition and development of the project evolves, from preliminary study to basic project, the calculation improves in its level of efficiency and estimation accuracy, following the applied methodology: [successive approximations at finite intervals]. The basic hypothesis as above has been made, achieving a maximum deviation of one tenth, in the estimated calculation of the true cost of predimensioning work. The cost calculation for material execution of the works is developed from functional “three‐dimensional” cubic parameters for the planned space and constructive “two dimensional” metric parameters for the surface that envelopes around the facade and the building’s footprint on the plot. The functional and building costs are analyzed at every stage of the process of calculation with “thematic/specific” parameters of management (Pg), project (Pp) and execution (Pe) of the estimated work in question, and finally the cost of contractual construction is estimated, as a consequence of increasing the cost of material execution with the percentage pertaining to the thematic/specific parameter of the projected work. The construction cost‐scaling Pcr.5n model will be a useful tool of great interest in the professional field to estimate the cost of the Basic Project as prescribed in the technical and legal framework of application. According to the appendix of the Technical Building Code (CTE), it is compulsory that the basic project contains an “approximate valuation of the material execution of the work, projected by chapters”, that is, that the basic project must contain at least an “approximate estimate” by chapter, trade or technology. This approximate estimate in the Basic Project is to be performed through the cost‐scaling technique, given that structural calculations, reconditioning plans and definitive contruction details of the envelope are still not available at this stage of the architectural project, insofar as specifications pertaining to the later project have not yet been developed. This approximate estimate of the cost of the works is easy to calculate through the implementation of the given model, both for students and professionals of the building sector. As explained and justified in this work, the implementation of the model for cost‐scaling during the preliminary stage is fast and accurate, as well as easy to apply both in single‐family houses (detached and semi‐detached) and collective housing (blocks). The model can also be applied in the field of the real‐estate valuation, official appraisal, analysis of the economic viability of real estate developments, estimate of the cost of finished projects and, generally, when an implementation project is not available and it is necessary to calculate the building costs of the projected works. The model can also be applied to check estimates calculated by the traditional analytical method (state of measurements broken down into price per unit cost details), both in private works and those promoted by Public Authorities. Finally, as potential lines for future research, the “five levels of calculation cost‐scaling model”, could be adapted and applied to purposes and typologies other than the residential one, such as service buildings and public facilities, valuation of historical buildings, interior and exterior development works, park and garden planning, etc… These lines of investigation are parallel to this one and, by way of a preview, can be found in the dissertations given in the International Congresses Scieconf/June 2013, Rics‐Cobra/September 2013 and in the IV Congress on building pathology ‐Ucam/April 2014.

Aplicación de la regresión logística en la predicción empírica de fenómenos complejos en obras subterráneas : squeezing y rotura de pilares de carbón

La heterogeneidad del medio geológico introduce en el proyecto de obra subterránea un alto grado de incertidumbre que debe ser debidamente gestionado a fin de reducir los riesgos asociados, que son fundamentalmente de tipo geotécnico. Entre los principales problemas a los que se enfrenta la Mecánica de Rocas moderna en el ámbito de la construcción subterránea, se encuentran la fluencia de roca en túneles (squeezing) y la rotura de pilares de carbón. Es ampliamente conocido que su aparición causa importantes perjuicios en el coste y la seguridad de los proyectos por lo que su estudio, ha estado tradicionalmente vinculado a la predicción de su ocurrencia. Entre las soluciones existentes para la determinación de estos problemas se encuentran las que se basan en métodos analíticos y numéricos. Estas metodologías son capaces de proporcionar un alto nivel de representatividad respecto del comportamiento geotécnico real, sin embargo, su utilización solo es posible cuando se dispone de una suficiente caracterización geotécnica y por tanto de una detallada definición de los parámetros que alimentan los complejos modelos constitutivos y criterios de rotura que los fenómenos estudiados requieren. Como es lógico, este nivel de definición solo es posible cuando se alcanzan etapas avanzadas de proyecto, incluso durante la propia construcción, a fin de calibrar adecuadamente los parámetros introducidos en los modelos, lo que supone una limitación de uso en etapas iniciales, cuando su predicción tiene verdadero sentido. Por su parte, los métodos empíricos permiten proporcionar soluciones a estos complejos problemas de un modo sencillo, con una baja parametrización y, dado su eminente enfoque observacional, de gran fiabilidad cuando se implementan sobre condiciones de contorno similares a las originales. La sencillez y escasez de los parámetros utilizados permiten a estas metodologías ser utilizadas desde las fases preliminares del proyecto, ya que estos constituyen en general, información habitual de fácil y económica adquisición. Este aspecto permite por tanto incorporar la predicción desde el principio del proceso de diseño, anticipando el riesgo en origen. En esta tesis doctoral, se presenta una nueva metodología empírica que sirve para proporcionar predicciones para la ocurrencia de squeezing y el fallo de pilares de carbón basada en una extensa recopilación de información de casos reales de túneles y minas en las que ambos fenómenos fueron evaluados. Esta información, recogida de referencias bibliográficas de prestigio, ha permitido recopilar una de las más extensas bases de datos existentes hasta la fecha relativa a estos fenómenos, lo que supone en sí mismo una importante contribución sobre el estado del arte. Con toda esta información, y con la ayuda de la teoría de clasificadores estadísticos, se ha implementado sobre las bases de datos un clasificador lineal de tipo regresión logística que permite hacer predicciones sobre la ocurrencia de ambos fenómenos en términos de probabilidad, y por tanto ponderar la incertidumbre asociada a la heterogeneidad incorporada por el medio geológico. Este aspecto del desarrollo es el verdadero valor añadido proporcionado por la tesis y la principal ventaja de la solución propuesta respecto de otras metodologías empíricas. Esta capacidad de ponderación probabilística permite al clasificador constituir una solución muy interesante como metodología para la evaluación de riesgo geotécnico y la toma de decisiones. De hecho, y como ejercicio de validación práctica, se ha implementado la solución desarrollada en un modelo coste-beneficio asociado a la optimización del diseño de pilares involucrados en una de mina “virtual” explotada por tajos largos. La capacidad del clasificador para cuantificar la probabilidad de fallo del diseño, junto con una adecuada cuantificación de las consecuencias de ese fallo, ha permitido definir una ley de riesgo que se ha incorporado al balance de costes y beneficios, que es capaz, a partir del redimensionamiento iterativo del sistema de pilares y de la propia configuración de la mina, maximizar el resultado económico del proyecto minero bajo unas condiciones de seguridad aceptables, fijadas de antemano. Geological media variability introduces to the subterranean project a high grade of uncertainty that should be properly managed with the aim to reduce the associated risks, which are mainly geotechnical. Among the major problems facing the modern Rock Mechanics in the field of underground construction are both, the rock squeezing while tunneling and the failure of coal pillars. Given their harmfulness to the cost and safety of the projects, their study has been traditionally linked to the determination of its occurrence. Among the existing solutions for the determination of these problems are those that are based on analytical and numerical methods. Those methodologies allow providing a high level of reliability of the geotechnical behavior, and therefore a detailed definition of the parameters that feed the complex constitutive models and failure criteria that require the studied phenomena. Obviously, this level of definition is only possible when advanced stages of the project are achieved and even during construction in order to properly calibrate the parameters entered in the models, which suppose a limited use in early stages, when the prediction has true sense. Meanwhile, empirical methods provide solutions to these complex problems in a simple way, with low parameterization and, given his observational scope, with highly reliability when implemented on similar conditions to the original context. The simplicity and scarcity of the parameters used allow these methodologies be applied in the early stages of the project, since that information should be commonly easy and cheaply to get. This aspect can therefore incorporate the prediction from the beginning of the design process, anticipating the risk beforehand. This thesis, based on the extensive data collection of case histories of tunnels and underground mines, presents a novel empirical approach used to provide predictions for the occurrence of both, squeezing and coal pillars failures. The information has been collected from prestigious references, providing one of the largest databases to date concerning phenomena, a fact which provides an important contribution to the state of the art. With all this information, and with the aid of the theory of statistical classifiers, it has been implemented on both databases, a type linear logistic regression classifier that allows predictions about the occurrence of these phenomena in terms of probability, and therefore weighting the uncertainty associated with geological variability. This aspect of the development is the real added value provided by the thesis and the main advantage of the proposed solution over other empirical methodologies. This probabilistic weighting capacity, allows being the classifier a very interesting methodology for the evaluation of geotechnical risk and decision making. In fact, in order to provide a practical validation, we have implemented the developed solution within a cost-benefit analysis associated with the optimization of the design of coal pillar systems involved in a "virtual" longwall mine. The ability of the classifier to quantify the probability of failure of the design along with proper quantification of the consequences of that failure, has allowed defining a risk law which is introduced into the cost-benefits model, which is able, from iterative resizing of the pillar system and the configuration of the mine, maximize the economic performance of the mining project under acceptable safety conditions established beforehand.

Capilla del M.I.T. de Eero Saarinen, 1950-55 : sincretismo en la armonía de los opuestos

La historia de la arquitectura se ha medido - en parte - por la evolución de las modas, épocas y estilos de la arquitectura religiosa. En la aparición de las nuevas capillas interreligiosas universitarias de los años '50 de Norteamérica, la capilla del M.I.T., bautizada tras su inauguración como “Kresge Chapel” en honor al apellido de su benefactor, fue el máximo exponente como prototipo en esta época marcada por la aparición nuevas conciencias de posguerra. (II Guerra Mundial). La tesis centra su investigación en esta capilla, cómo nació en respuesta a la necesidad de compatibilizar la enseñanza reglada científico tecnológica con una formación religiosa y humanista, para el programa impuesto como ampliación del campus universitario del MIT en el barrio universitario de Cambridge, Boston, Massachussets, en torno a dos edificios principales a proyectar: capilla y auditorio. Desde el trabajo de investigación se aporta la información documental necesaria para saber cómo evolucionó desde sus primeros bocetos hasta su construcción. Su nacimiento como necesidad en la sociedad universitaria no fue nada espontáneo, quedando a medias entre la influencia escandinavo - alemana y la tradición americano-luterana de anteriores iglesias neoclásicas herederas del “Plan Akron”. La formación académica y profesional dirigida por su padre, Eliel Saarinen, suman junto a los viajes del arquitecto, una herencia “genética” para con este prototipo ajeno al emergente “estilo internacional” y ayudan a comprender la dimensión compleja de lo que es capaz de representar la capilla. La capilla es refugio emocional de la luz y es un punto de inflexión notable en la recuperación del tipo centrado renovado y evolucionado, que junto con el doble recurso lumínico - efectista, de la vertical para el altar y horizontal inferior, distribuido desde el perímetro ondulado en el interior, el ejemplo es muestra la promoción de una cierta sensibilidad para con las nuevas formas de la "religión" emergentes en la Norteamérica de los años 50. Desde el sincretismo como mecanismo y principal “modus operandi” proyectual, FE versus RAZÓN, aparecen como dualismo permanente en todas las fases del proyecto, desde un proceso de búsqueda de la armonía de ambos y para cada uno de ellos. Con el estudio del modelo prototípico del MIT, buscamos el "patrón" empleado por el arquitecto en su proyección de "nueva iglesia" adaptado a la diversidad cultural y religiosa y de las nuevas y diferentes sensibilidades humanistas para el proyecto. ----------------------------------------------------- SUMMARY--------------------------------------------------- The history of architecture is measured - in part - by the evolution of fashion, periods and styles of religious architecture. In the emergence of the new interfaith university chapel of the 1950s in North America, the chapel of MIT, named after its inauguration as "Kresge Chapel" in honor of its benefactor, was the best example of a prototype, in this time so marked by the emergence of new postwar consciousnesses. The thesis focuses its research on this chapel; how it came about in response to the need to reconcile formal scientific and technological education with religious and humanist training for the program imposed as an extension of the campus of MIT in the university district of Cambridge, Boston Massachusetts, around two main projected buildings : Chapel and auditorium. From research work has been obtained the documentary information necessary to know how it evolved from the first sketches to its construction. Its creation as a necessity of the university society was not at all spontaneous, being halfway between the Scandinavian influence - German and the American Lutheran tradition of neoclassical churches, the heirs to the "Akron Plan". The academic and professional training directed by his father, Eliel Saarinen, together with the travels of the architect, a "genetic" heritage with this external prototype for the emerging "international style", and help to understand the complex dimension of what the chapel is capable of representing. The chapel is an emotional refuge of light and is a remarkable turning point in the recovery of such focused renewed and evolved, along with the double lumen resource - gimmicky, vertical to the altar and lower horizontal, distributed from the undulating perimeter inside, the example is shown to promote a certain sensitivity to the new forms of "religion" but vague religious profile emerging in the America of the 50s. From the syncretism as a mechanism and main "modus operandi" of the project, FAITH versus REASON appears as permanent dualism in all phases of the project from a process of finding the harmony of both and for each of them. With the study of the prototypical model of MIT, we seek the "pattern" used by the architect in his projection of "new church" adapted to the cultural and religious diversity and new and different humanist sensitivities for the project. El desarrollo vierte la luz suficiente para entender los patrones de lo arquitectónico en la capilla, que hacen de ella, la comunión armónica y perfecta de los nombrados opuestos en el campus universitario del MIT. En el camino, además, la investigación arroja luz y orden sobre las fases del proyecto a través de la contribución, recogida, clasificación y orden de los datos, fechas y documentos gráficos, a día de hoy dispersos y confusamente publicados, debido a la no existencia de un estudio profundo y completo como el que pretende ser este trabajo, por ser una obra fundamental en la historia de la arquitectura moderna. El patrón final demostrará el artificio sincrético de cada una de las partes - cada uno en sí misma y cosidas todas - formando el "Ima Summis" de la capilla; resultado de la acción proyectual deducida de su serie genética descifrada. De esta forma, lo sincrético, aparece como el principal atributo del hecho construido, pasando de lo místico a lo científico, de lo intuitivo a lo razonado y siempre con el vehículo de su arquitectura para la interpretación de lo inefable al interior. En cuanto a la estructura de la tesis, se inicia el desarrollo a partir de una introducción en la que se declaran las intenciones y se describe el contexto de lo investigado en torno a la hipótesis principal anunciada en el subtítulo de la tesis. Frente a consideraciones previas de la capilla y de la propia investigación, se expone y explica la hipótesis principal, junto a otros objetivos secundarios. Para finalizar la introducción, se describe el método seguido como estrategia y se justifica la estructura de redacción del documento para la compresión de este trabajo hacia sus conclusiones. Es en el primer capítulo, el C1, donde se inicia el cuerpo central mediante la exposición historiográfica de la situación y contexto previo a la capilla como antecedentes. En un segundo capítulo, el C2, se aborda el estudio del desarrollo del proyecto y de la obra y construcción de la capilla, base documental necesaria. Para ello se inicia con la descripción del lugar, del encargo y del programa, para pasar a mostrar con detalle las distintas propuestas de cada una de las fases del proyecto. En definitiva, qué se proyecto, cómo evolucionó el proyecto y en qué fases transcurrió, para entre otras cuestiones, entender el cambio de estilo desde una fase influenciada por la capilla de Mies construida en el ITT de Chicago, (denominadas en este trabajo por esta influencia como modelos “miesianos”) y la fase reencuentro con el modus de hacer iniciado por su padre Eliel, a través de un modelo a medias de una herencia escandinavo - alemana y la tradición luterano - americana, (denominada en este trabajo como herencia o modelos “saariniana/os”). The development sheds enough light to understand the architectural patterns of the chapel, making it the perfect and harmonic communion named opposites on the campus of MIT. Along the way, furthermore, the research sheds light and order on the phases of the project through the contribution, collection, sorting and order of data, dates and graphic documents, today scattered and confusingly published, due to inexistence of a deep and comprehensive study like this work is meant to be, in the context of such a seminal work in the history of modern architecture. The final pattern will demonstrate the syncretic artifice of each of the parts - each in itself and all together - forming the "Ima Summis" of the chapel; the result of the project action deducted from its deciphered genetic series. Being the SYNCRETIC, the main attribute of the built matter, passing from the mystical to the scientific, from the intuitive to the reasoned and always with the vehicle of architecture as the representation of the ineffable. As for the structure of the thesis, the development starts from an introduction in which the intentions are declared and the context of that which is investigated is described, in terms of the main hypothesis announced in the subtitle of the thesis. Faced with previous considerations of the chapel and the research itself, the principal hypothesis is expressed and explained, along with other secondary objectives. To conclude the introduction, the method followed is described as a strategy and the structuring of the document is justified for the compression of this work towards its conclusions. It is in the first chapter of the thesis, the C1, where the main body of the work is initiated through the historiographical account of the situation and context prior to the chapel as antecedents. A second chapter, C2, addresses the study of the development of the project and of the work and construction of the chapel, based on the necessary documentary evidence. To this end, the analysis begins with the description of the place, the commission and the program, moving on to analyze in detail the various proposals of each phase. What is projected, how it evolved and through what phases passed the project to, among other questions, understand the change in style between the phase of influence of Mies through the projected chapel in the ITT of Chicago chapel (called in this work as "miesian" influences or models) and the reunion with the modus of making initiated by his father Eliel, through a model equally at once of Scandinavian-German heritage and of the American-Lutheran tradition, (referred to in this work as "saarinian" inheritance or models). Para el tercer capítulo, el C3, se llevan a estudio y análisis, los elementos más destacables en los que se prueban las particularidades llamadas “genéticas” en cada uno de las partes principales detectadas en la capilla. Desde ellas se rastrean las influencias - a veces sinergias - que ayudan a justificar y conformar una clasificación genética en torno a cuatro patrones principales, de los que poder discernir al final del capítulo, el “patrón matriz” de la propia capilla en base a la concurrencia de los órdenes arquitectónicos que los conforman. Una vez obtenida la información y orden necesario, se puede afrontar el punto álgido de esta tesis con el cuarto capítulo, el C4, en el que se justifica la capacidad sincrética de la capilla como respuesta a la hipótesis principal señalada en el subtítulo. Para ello se inicia el capítulo con el enfoque y contexto del término “sincretismo” y “sincrético”, aportando la justificación de sus usos para con esta investigación, antes de explicar que la capilla es sincrética por la suma de dos claves fundamentales. La clave primera, correspondiente a la capacidad interconfesional y aconfesional de la capilla, y su capacidad de trascender al interior desde ambas situaciones además de ser reconocible por el religioso y a la vez por el científico. Y la clave segunda, que corresponde a la suma de las distintas partes sincréticas, cada una en si mismas, capaz de sumar todas juntas, este edificio sincrético de los nombrados opuestos. Una vez discernido las claves de lo sincrético en la capilla y a pesar de su doble carácter SACRO Y PROFANO, una comparativa posiciona a la capilla como único entre los ejemplos interconfesionales construidos en los ´50, sin haberse repetido de igual manera y mismo resultado en el tiempo, ni en ninguna otra universidad o centro tecnológico. Así la exposición de este trabajo finaliza con el último capítulo, el C5, en el que desde esa comparativa, una serie de cuestiones unen y distancian a la del MIT y dan acierto a la apuesta inicial, concluyendo que la hipótesis y el patrón de la misma, es el patrón de lo sincrético que modela el ”modus operandi ” del arquitecto. Tras el desarrollo, la investigación cierra filas en torno a cuatro conclusiones para los cuatro capítulos principales; C2, C3, C4, C5. La capilla del MIT como modelo prototípico no se repite en el tiempo, ni en ninguna otra universidad y se posiciona como el mejor prototipo – hito de una nueva arquitectura religiosa universitaria. In the third chapter, C3, we study and analyze the most notable elements in which are found those particularities referred to as "genetic" in each of the principal parts, (see above C3.1.1... - C3.1.8), where these influences - sometimes synergies - are traced, helping to justify and form a classification based on four of those principals (see above C3.2), from which, at the end of this chapter may be discerned a matrix pattern, that of the chapel itself (see above. C3.3.), based on concurrent architectural orders. Once the necessary information and order is obtained, we come to the decisive point in the fourth chapter, C4, where the syncretic capacity of the chapel in response to the main hypothesis indicated in the subtitle of the thesis is justified. For this, the chapter beings with the focus and context of the terms "syncretism" and "syncretic", providing justification for their use for this research, going on to assert that the chapel is syncretic from the sum of two fundamental aspects: the first corresponds to the interfaith and non-denominational capacities of the chapel, its ability to transcend both situations and be recognizable by both the religious and the scientific. The second corresponds to the sum of the different syncretic parts, each in themselves, capable of making together a syncretic building with the opposite. Once discerned the keys to the syncretic and epic in the chapel and despite its dual character both SACRED and PROFANE, a comparatison positions the chapel as being unique among interfaith examples built in the 1950s, without being repeated in the same way and with the same result over time or in any other university or centre of technology. So, the exhibition of this work ends with the last chapter, C5, in which from that comparison a number of issues come together and to distance themselves from MIT and bear out the initial proposition, concluding that the hypothesis and its pattern, the pattern of the syncretic which models the "modus operandi" of the architect to contain the ineffable. The research closes ranks around four conclusions for the four main chapters; C2, C3, C4, and C5 The chapel of MIT as a prototypical model is not repeated in time, or any other university and is positioned as the best prototype - a landmark of a new universitary religious architecture.

Valorização da participação da engenharia de produção no projeto simultâneo de empresa construtora-incorporadora.

A falta de integração entre áreas de conhecimento pode gerar efeitos negativos no processo de projeto em uma construtora-incorporadora. Em muitos casos, o projeto do produto é elaborado pela incorporadora sem qualquer participação da área responsável pela produção e de outras áreas da construtora. O trabalho apresenta uma análise sobre a gestão de projetos na construção de edifícios, valorizando a participação da engenharia de produção nessa fase, apoiando-se nos conceitos de Projeto Simultâneo, e propõe diretrizes para sua aplicação na construtora-incorporadora Cyrela, com enfoque na construtibilidade e manutenibilidade. Para desenvolver a pesquisa foi realizada uma revisão bibliográfica sobre as características da gestão de projetos, da Engenharia de Produção na construção de edifícios, e sobre a Engenharia Simultânea no desenvolvimento de produtos com comparativo de modelos de indústrias seriadas para a construção civil, incluindo a interação entre os agentes do processo. Como resultados são apresentados: uma análise da interação entre os agentes do processo; a ligação entre pessoas, processos e tecnologia; os conceitos de construtibilidade, manutenibilidade e retroalimentação na interface com projetos. São igualmente feitas análises das tendências de modernização na gestão dos projetos por meio da modelagem da informação da construção e, apoiado em estudo de caso, são apresentadas as experiências do Projeto Simultâneo aplicadas na Cyrela. Por fim, são apresentadas as diretrizes para participação da Engenharia de Produção da Construtora e Incorporadora Cyrela no Projeto Simultâneo, sendo essa a principal contribuição do trabalho. Embora suas contribuições possam servir de referência para demais empresas do setor, essa pesquisa foi desenvolvida para aplicações práticas da Cyrela, construtora-incorporadora que atua na construção de edifícios em todas as regiões do Brasil.

Triassic redbeds in the Malaguide Complex (Betic Cordillera — Spain): petrography, geochemistry and geodynamic implications

Sandstone petrography and mudstone mineralogy and geochemistry of Triassic mudstones and sandstones from continental redbeds of the Malaguide Complex (Betic Cordillera, southern Spain) provide useful information on provenance, palaeoclimate and geodynamics during the early stages of the Pangea break-up, and on their diagenetic evolution. The sandstones are quartzarenites to sub-litharenites, with minor lithic fragments and rare feldspars. The mudstone samples show a PAAS like elemental distribution. The samples likely record recycling processes from their metasedimentary basement rocks that significantly affected the weathering indices, and monitors cumulative effects, including a first cycle of weathering at the source rocks. Sandstone composition and chemical–mineralogical features of mudstones record a provenance derived from continental block and recycled orogen that were weathered under warm and episodically wet climate. Source areas were located towards the east of the present-day Malaguide outcrops, and were formed by fairly silicic rock types, made up mainly of Palaezoic metasedimentary rocks, similar to those of the Paleozoic underlying series, with subordinate contributions from magmatic–metamorphic sources, and a rare supply from mafic metavolcanic rocks. Clay-mineral distribution of mudstones is dominated by illite and illite/smectite mixed-layer that result from differences in provenance, weathering, and burial/temperature history. Illite crystallinity values, illitization of kaolinite, occurrence of typical authigenic minerals and apatite fission-track studies, coupled with a subsidence analysis of the whole Malaguide succession suggest burial depths of at least 4–6 km with temperatures of 140–160 °C, typical of the burial diagenetic stage, and confirm the Middle Miocene exhumation of the Betic Internal Domain tectonic stack topped by the Malaguide Complex.

Compositional and Geochemical Signatures for the Sedimentary Evolution of the Middle Triassic–Lower Jurassic Continental Redbeds from Western-Central Mediterranean Alpine Chains

Compositional and chemical analyses suggest that Middle Triassic–Lower Liassic continental redbeds (in the internal domains of the Betic, Maghrebian, and Apenninic chains) can be considered a regional lithosome marking the Triassic-Jurassic rift-valley stage of Tethyan rifting, which led to the Pangaea breakup and subsequent development of a mosaic of plates and microplates. Sandstones are quartzose to quartzolithic and represent a provenance of continental block and recycled orogen, made up mainly of Paleozoic metasedimentary rocks similar to those underlying the redbeds. Mudrocks display K enrichments; intense paleoweathering under a hot, episodically humid climate with a prolonged dry season; and sediment recycling. Redbeds experienced temperatures in the range of 100°–160°C and lithostatic/tectonic loading of more than 4 km. These redbeds represent an important stratigraphic signature to reconstruct a continental block (Mesomediterranean Microplate) that separated different realms of the western Tethys from Middle-Late Jurassic to Miocene, when it was completely involved in Alpine orogenesis.

The bear watches the dragon. The Russian debate on China. OSW Point of View Number 31, February 2013

Most participants in the Russian public debate seem to agree in their evaluation of the present condition of Russian-Chinese relations. There is awareness of increasing inequality between these two powers and Russia’s weakening position as compared to China.Those who share the optimistic view see co-operation with China as an opportunity for the Russian economy and a key element of Russia’s multi-directional foreign policy, an opportunity for Russia to avoid unilateral dependence on the West. The pessimists view the deepening co-operation with China through the prism of threats resulting from the increasing imbalance in bilateral relations. The greatest source of concern is the model of economic relations, which is often referred to as neo-colonial, where Russia’s role is reduced to that of a supplier of raw materials to China. The possible consequences are evaluated in different ways, ranging from the political subordination of Russian interests the Chinese ones to real loss of control over the Russian Far East. Those who share such views believe that Moscow should slow down its rapprochement with China and search for other partners in Eastern Asia, relations with whom could counterbalance the Chinese influence.

The History and Challenges of Cohesion Policies. Jean Monnet/Robert Schuman Paper Series Vol. 14 No. 2, February 2014

From Introduction. Regional economic disequilibria was viewed as both an obstacle to and result of integration (European Commission 1965; European Commission 1962; European Commission 1969). Even within the Treaty of Rome, the Community tried to establish mechanisms to alleviate regional inequality. However, it was not until 1975 that the main mechanism of regional policy was established as a result of British and Irish enlargement: the European Regional Development Fund (ERDF). Since then, cohesion policy has become a significant EU expenditure accounting for €347bn, or 35.7% of the total EU budget for 2007-13(European Commission Regional Policy-Info Regio 2012). It has also become a key policy linked to enlargement. The underlying principle of cohesion policy assumes that the market alone cannot solve development problems and therefore government intervention is needed. This notion is in direct contrast to the underlying principle of EU competition policy, which asserts that the free market can solve economic development problems (Meadows, interview by author, 2003). The logic underlying cohesion policy is not only counter to EU competition policy, but also regulatory policies. Unlike other EU policies, cohesion policy is not a sectoral policy, but rather territorial in nature (Leonardi, 2006). Thus at times EU regulatory policy has also unintentionally worked counter to the goals of regional policy, sometimes disadvantaging poorer regions (Dudek, 2005). As the Community has sought to ameliorate regional disparities, it meant that all levels of government: local, regional, national and supranational would need to be involved, however, member states have different territorial governance and European regional development programs have to varying degrees impacted the relationship and policy responsibility of different levels of government (Leonardi, 2006; Bachtler and Michie 1993; Marks, 1993). The very nature of regional development policy has provoked a re-examination of subsidiarity, or which level of government is the lowest and most appropriate level. The discussion of policy formulation and implementation at the lowest level possible also addresses the issue of the democratic deficit. Some argue that the closer government is to the people the more responsive and representative it is. Democracy, however, also implies that public funds are used in a transparent way and for public rather than private good. Yet, as we examine the history and current situation of EU regional funds we find that corruption and misuse still abound. Thus, to understand the history of regional policy it is imperative to look at the major transformations of the policy, how regional policy has impacted subsidiarity and the quality of democracy, become an important instrument of enlargement and contradicted or conflicted with other EU policies.

Some theoretical and empirical aspects of the analysis of retirement behavior : final report /

"This project was supported by the Office of Policy Planning and Research, LMSA/PWBP, U.S. Department of Labor under Contract No. J-9-P-9-0175."

COMUNICAÇÃO COMUNITÁRIA E PARTICIPAÇÃO POPULAR NO PROJETO CASA BRASIL

Estudo sobre o Projeto Casa Brasil no seu conjunto verificando suas origens e panorama atual, além de enfatizar as experiências de Comunicação Comunitária presentes na unidade Casa Brasil Imbariê. A pesquisa tem como objetivo geral resgatar o contexto histórico do Projeto Casa Brasil e sua situação atual como política pública e sua relação com a Comunicação Comunitária. Por meio de pesquisa bibliográfica constitui-se toda uma base teórica, principalmente no que se refere a Comunicação Comunitária como potencializadora do poder de comunicar. O método utilizado foi o cartográfico, viabilizado por meio das seguintes técnicas: pesquisa documental, entrevistas semiestruturadas e a observação participante. Conclui-se que a Comunicação Comunitária estava prevista nas diretrizes do Projeto Casa Brasil, porém como conceito e prática é uma categoria ausente na maioria das unidades, pois os interesses privados e político-partidários sobrepõem-se ao interesse público, o que aparenta ser um problema estrutural no próprio projeto. Mas, apesar da Casa Brasil Imbariê não se apropriar da Comunicação Comunitária como conceito, se apropria dela na prática, pois as experiências desenvolvidas pelos seus usuários servem como um instrumento de participação popular no exercício da cidadania e promove, em partes, a articulação da comunidade.

The detection and identification of extraneous metals in material conveyance systems

The aim of this work was to design and build an equipment which can detect ferrous and non-ferrous objects in conveyed commodities, discriminate between them and locate the object along the belt and on the width of the belt. The magnetic induction mechanism was used as a means of achieving the objectives of this research. In order to choose the appropriate geometry and size of the induction field source, the field distributions of different source geometries and sizes were studied in detail. From these investigations it was found the square loop geometry is the most appropriate as a field generating source for the purpose of this project. The phenomena of field distribution in the conductors was also investigated. An equipment was designed and built at the preliminary stages of thework based on a flux-gate magnetometer with the ability to detect only ferrous objects.The instrument was designed such that it could be used to detect ferrous objects in the coal conveyors of power stations. The advantages of employing this detector in the power industry over the present ferrous metal electromagnetic separators were also considered. The objectives of this project culminated in the design and construction of a ferrous and non-ferrous detector with the ability to discriminate between ferrous and non-ferrous metals and to locate the objects on the conveying system. An experimental study was carried out to test the performance of the equipment in the detection of ferrous and non-ferrous objects of a given size carried on the conveyor belt. The ability of the equipment to discriminate between the types of metals and to locate the object on the belt was also evaluated experimentally. The benefits which can be gained from the industrial implementations of the equipment were considered. Further topics which may be investigated as an extension of this work are given.

O projeto de arquitetura de espaços temporários com o uso de sistema construtivo remontável: um estudo exploratório

The purpose of this research is to study the portable or reassemblable architectures, which, different from conventional architecture (whose designs are of permanent buildings), corresponds to the designing of spaces with temporary purposes. The focus of the study is the architectural design of spaces that are produced from building systems that can to be moved to different places (process of assembly / disassembly / reassembly) in order to identify the types of spaces generated and the processes used in their design / projecting. The aim is to investigate relationships between the initial project conceived based on a Reassemblable Construction System (RCS) and its application in the architectural design of professionals and students in order to contribute to the understanding of the specificities of this type of design activity. To this end it was developed the exploratory research based on multimedia methods, which includes: documentary analysis, technical visits, interviews, surveys, academic exercise and documentation by images. Although the study is not conclusive, the results indicate significant differences between the point of view of the RCS´s designers and its users (architects and architecture students) since the users demonstrated to have some difficulty to access the features provided for the first group, in particular the students. It is also demonstrated that the use of RCSs seems to change the appreciation / hierarchization of the conditions of project design, since, unlike what happens in traditional architectural design, the designers who use them seem to be more concerned with constructive issues, especially the structural elements (support and covering), instead of functionality, aesthetics and even physical characteristics of the site

O projeto de arquitetura de espaços temporários com o uso de sistema construtivo remontável: um estudo exploratório

The purpose of this research is to study the portable or reassemblable architectures, which, different from conventional architecture (whose designs are of permanent buildings), corresponds to the designing of spaces with temporary purposes. The focus of the study is the architectural design of spaces that are produced from building systems that can to be moved to different places (process of assembly / disassembly / reassembly) in order to identify the types of spaces generated and the processes used in their design / projecting. The aim is to investigate relationships between the initial project conceived based on a Reassemblable Construction System (RCS) and its application in the architectural design of professionals and students in order to contribute to the understanding of the specificities of this type of design activity. To this end it was developed the exploratory research based on multimedia methods, which includes: documentary analysis, technical visits, interviews, surveys, academic exercise and documentation by images. Although the study is not conclusive, the results indicate significant differences between the point of view of the RCS´s designers and its users (architects and architecture students) since the users demonstrated to have some difficulty to access the features provided for the first group, in particular the students. It is also demonstrated that the use of RCSs seems to change the appreciation / hierarchization of the conditions of project design, since, unlike what happens in traditional architectural design, the designers who use them seem to be more concerned with constructive issues, especially the structural elements (support and covering), instead of functionality, aesthetics and even physical characteristics of the site