971 resultados para Production Capacity
Resumo:
O monitoramento da razão Z de duas variáveis através de gráfico de controle tem sido um tema recentemente explorado na literatura. Para analisar mais o assunto, o estudo avalia a eficiência e viabilidade de aplicação dessa ferramenta como suporte na tomada de decisão para gerenciamento de capacidade de mão de obra de retaguarda (doravante mencionado como Backoffice) de serviço de empresa do setor bancário. Tradicionalmente, gráficos de controle tem sido utilizados para monitorar o processo produtivo de manufaturas, mas recentemente tem sido adotado para monitoramento de alguns serviços. Apesar de ainda seguir muitos conceitos pioneiros na manufatura, a atividade do setor de serviços apresenta suas particularidades como, por exemplo, a impossibilidade de gerar estoque. Assim, a necessidade de adequar seus recursos à demanda torna-se essencial, sendo fundamental a gestão de controles e sua urgência para que possa reagir rapidamente em caso de variação de demanda e adequar sua capacidade. Em um cenário de restrição de recursos, planejar é crucial para evitar desperdícios e garantir eficiência. O objetivo deste estudo é apresentar o gráfico de controle como ferramenta para monitorar a razão de duas variáveis aleatórias: a demanda e a mão de obra em Backoffice de serviço em um banco. Nesse trabalho, gráfico de controle de Shewhart tradicional e gráfico de controle de Shewhart com regras suplementares são analisados e os resultados obtidos confirmam a possibilidade de utilização da ferramenta de gráficos de controle para o gerenciamento e adequação de mão de obra para atender a demanda. O monitoramento da razão (demanda/ mão de obra) ajudará o gestor a alocar adequadamente o time (mão de obra) de acordo com a demanda e a capacidade produtiva. Como contribuição, o estudo avalia o comportamento da razão Z = X/Y em situação de alta variabilidade da variável X e baixa variabilidade da variável Y .
Resumo:
Sodium phosphates are a class of chemicals that have been widely employed in commercial and consumer applications. However, declining use of these chemicals due to environmental concerns has lead to restructuring within the industry that has caused, and is likely to continue to cause, reduction of sodium phosphate production capacity. Closure of a sodium phosphate manufacturing plant necessitates decommissioning and decontamination activities that are subject to a variety of federal, state, and local regulations. A compliance plan was developed to provide a blueprint for ensuring that all federal regulatory requirements are met, however, site dependent state and local requirements were excluded. The compliance plan provides a framework that addresses project team formation and project planning, regulatory requirements, identification of affected processing equipment, plant pre-shutdown activities, waste stream identification and waste management facilities, safety, training, and emergency preparedness planning, and project decommissioning remedial actions. This regulatory compliance plan will enable sodium phosphate plant operators to complete decontamination and decommissioning work in a timely, efficient, compliant, and cost effective manner.
Resumo:
Resumen de la comunicación presentada en PIC2015 – the 14th International Congress on Combustion By-Products and Their Health Effects, Umeå, Sweden, 14-17 June 2015.
Resumo:
Low temperature alteration of oceanic basement rocks is characterized by net gain of sulfur, which commonly yields low d34S values, suggesting involvement of microbial sulfate reduction. In order to test whether secondary sulfide minerals are consistent with a biogenic source, we apply high precision multiple sulfur isotope analysis to bulk rock sulfide and pyrite isolates from two contrasting types of altered oceanic basement rocks, namely serpentinized peridotites and altered basalts. Samples from two peridotite sites (Iberian Margin and Hess Deep) and from a basalt site on the eastern flank of the Juan de Fuca Ridge yield overlapping d34S values ranging from 0 per mil to -44 per mil. In contrast, sulfides in the basalt site are characterized by relatively low D33S values ranging from -0.06 per mil to 0.04 per mil, compared to those from peridotite sites (0.00 per mil to 0.16 per mil). The observed D33S signal is significant considering the analytical precision of 0.014 per mil (2 sigma). We present a batch reaction model that uses observed d34S and D33S relationships to quantify the effect of closed system processes and constrain the isotope enrichment factor intrinsic to sulfate reduction. The estimated enrichment factors as large as 61 per mil and 53 per mil, for peridotite and basalt sites respectively, suggest the involvement of microbial sulfate reduction. The relatively high D33S values in the peridotite sites are due to sulfate reduction in a closed system environment, whereas negative D33S values in the basalt site reflect open system sulfate reduction. A larger extent of sulfate reduction during alteration of peridotite to serpentinite is consistent with its higher H2 production capacity compared to basalt alteration, and further supports in-situ microbial sulfate reduction coupled with H2 production during serpentinization reactions.
Resumo:
1. We examined the effect of thermal acclimation on fighting success and underlying performance traits in the crayfish Cherax destructor. We tested the hypothesis that animals will be more successful when fighting at their acclimation temperature than at a colder or warmer temperature, and that changes in metabolic capacity underlie differences in behavioural performance. 2. Thermal acclimation (to 20 degrees C and to 30 degrees C) had a significant effect on behavioural contests, and the likelihood of winning was significantly greater when individuals fought at their acclimation temperature against an individual from an alternate acclimation temperature. 3. The ratio of ADP stimulated respiration to proton leak (respiratory control ratio) of isolated mitochondria increased significantly in chelae muscle of the cold-acclimated group, and differences in respiratory control ratio between winners and losers were significantly correlated with the outcome of agonistic encounters. However, acclimation did not affect tall muscle mitochondria or the activity of pyruvate kinase in either chelae or tail muscle. 4. The force produced by closing chelae was thermally insensitive within acclimation groups, and there were no significant differences between acclimation treatments. None the less, differences in chelae width between contestants were significantly correlated with the outcome of agonistic encounters, but this perceived resource holding power did not reflect the actual power of force production. 5. Thermal acclimation in C destructor has beneficial consequences for dominance and competitive ability, and the success of cold acclimated animals at the cold temperatures can be at least partly explained by concomitant up-regulation of oxidative ATP production capacity.
Resumo:
There has been a long dependency on credit by Indonesian farmers as a result of the lack of capital to apply proper farming practices. This paper describes the farming activities applied by agricultural credit users in Central Lombok, Indonesia. A survey was conducted during July 2001- March 2002 of 65 farmers making use of government or private credit in three villages within the Regency. Data from the farmers were collected using face-to-face, semi-structured interviews. Survey results indicated that on average, farmers had some 20 years experience of farming, were aged 40 years, but lacked of formal education. Their main asset was cropping land with average landholding of 0.69 ha. As a consequence of their capital constraints, farmers were commonly making use of credit to finance their farming activities, including both production of rice as the main crop and secondary crops. Farmers generally applied less than recommended amount of inputs in their farming practices, since the amount of credit they obtained was limited. As a result, their farms become less productive and their repayment capability of loans diminished. Of 65 farmers interviewed, 54 could earn extra income by engaging in a variety of non-farm activities, which contributed on average some 36% to family incomes of over Rp 5 million (A$ 1 thousand). The average credit repayment rate made by agricultural producers was 60%. The repayment made did not always reflect farm production capacity, being sometimes supported by other borrowings. The greater role of credit is not in increasing agricultural production or improving farmers’ income, but in helping them to sustain farm production and their living. Farmers need a bigger amount of credit to make an impact on their livelihood. This should be accompanied by extension services for farmers to enable better use of credit and to change their attitude towards it. As well, farmers require to be equipped with technical and market skills to run a business. Interdisciplinarity, holistic analysis, and an expansion of traditional ‘agricultural’ interests to embrace the span of interests included in rural livelihood, are each critical features of revision of the existing system.
Resumo:
The amplification of demand variation up a supply chain widely termed ‘the Bullwhip Effect’ is disruptive, costly and something that supply chain management generally seeks to minimise. Originally attributed to poor system design; deficiencies in policies, organisation structure and delays in material and information flow all lead to sub-optimal reorder point calculation. It has since been attributed to exogenous random factors such as: uncertainties in demand, supply and distribution lead time but these causes are not exclusive as academic and operational studies since have shown that orders and/or inventories can exhibit significant variability even if customer demand and lead time are deterministic. This increase in the range of possible causes of dynamic behaviour indicates that our understanding of the phenomenon is far from complete. One possible, yet previously unexplored, factor that may influence dynamic behaviour in supply chains is the application and operation of supply chain performance measures. Organisations monitoring and responding to their adopted key performance metrics will make operational changes and this action may influence the level of dynamics within the supply chain, possibly degrading the performance of the very system they were intended to measure. In order to explore this a plausible abstraction of the operational responses to the Supply Chain Council’s SCOR® (Supply Chain Operations Reference) model was incorporated into a classic Beer Game distribution representation, using the dynamic discrete event simulation software Simul8. During the simulation the five SCOR Supply Chain Performance Attributes: Reliability, Responsiveness, Flexibility, Cost and Utilisation were continuously monitored and compared to established targets. Operational adjustments to the; reorder point, transportation modes and production capacity (where appropriate) for three independent supply chain roles were made and the degree of dynamic behaviour in the Supply Chain measured, using the ratio of the standard deviation of upstream demand relative to the standard deviation of the downstream demand. Factors employed to build the detailed model include: variable retail demand, order transmission, transportation delays, production delays, capacity constraints demand multipliers and demand averaging periods. Five dimensions of supply chain performance were monitored independently in three autonomous supply chain roles and operational settings adjusted accordingly. Uniqueness of this research stems from the application of the five SCOR performance attributes with modelled operational responses in a dynamic discrete event simulation model. This project makes its primary contribution to knowledge by measuring the impact, on supply chain dynamics, of applying a representative performance measurement system.
Resumo:
This paper investigates the simultaneous causal relationship between investments in information and communication technology (ICT) and flows of foreign direct investment (FDI), with reference to its implications on economic growth. For the empirical analysis we use data from 23 major countries with heterogeneous economic development for the period 1976-99. Our causality test results suggest that there is a causal relationship from ICT to FDI in developed countries, which means that a higher level of ICT investment leads to an increase inflow of FDI. ICT may contribute to economic growth indirectly by attracting more FDI. Contrarily, we could not find significant causality from ICT to FDI in developing countries. Instead, we have partial evidence of opposite causality relationship: the inflow of FDI causes further increases in ICT investment and production capacity. © United Nations University 2006.
Resumo:
The consumption of energy on the planet is currently based on fossil fuels. They are responsible for adverse effects on the environment. Renewables propose solutions for this scenario, but must face issues related to the capacity of the power supply. Wind energy offshore emerging as a promising alternative. The speed and stability are greater winds over oceans, but the variability of these may cause inconvenience to the generation of electric power fluctuations. To reduce this, a combination of wind farms geographically distributed was proposed. The greater the distance between them, the lower the correlation between the wind velocity, increasing the likelihood that together achieve more stable power system with less fluctuations in power generation. The efficient use of production capacity of the wind park however, depends on their distribution in marine environments. The objective of this research was to analyze the optimal allocation of wind farms offshore on the east coast of the U.S. by Modern Portfolio Theory. The Modern Portfolio Theory was used so that the process of building portfolios of wind energy offshore contemplate the particularity of intermittency of wind, through calculations of return and risk of the production of wind farms. The research was conducted with 25.934 observations of energy produced by wind farms 11 hypothetical offshore, from the installation of 01 simulated ocean turbine with a capacity of 5 MW. The data show hourly time resolution and covers the period between January 1, 1998 until December 31, 2002. Through the Matlab R software, six were calculated minimum variance portfolios, each for a period of time distinct. Given the inequality of the variability of wind over time, set up four strategies rebalancing to evaluate the performance of the related portfolios, which enabled us to identify the most beneficial to the stability of the wind energy production offshore. The results showed that the production of wind energy for 1998, 1999, 2000 and 2001 should be considered by the portfolio weights calculated for the same periods, respectively. Energy data for 2002 should use the weights derived from the portfolio calculated in the previous time period. Finally, the production of wind energy in the period 1998-2002 should also be weighted by 1/11. It follows therefore that the portfolios found failed to show reduced levels of variability when compared to the individual production of wind farms hypothetical offshore
Resumo:
O bin picking é um processo de grande interesse na indústria, uma vez que permite maior automatização, aumento da capacidade de produção e redução dos custos. Este tem vindo a evoluir bastante ao longo dos anos e essa evolução fez com que sistemas de perceção 3D começassem a ser implementados. Este trabalho tem como principal objetivo desenvolver um sistema de bin picking usando apenas perceção 3D. O sistema deve ser capaz de determinar a posição e orientação de objetos com diferentes formas e tamanhos, posicionados aleatoriamente numa superfície de trabalho. Os objetos utilizados para fazer os testes experimentais, são esferas, cilindros e prismas, uma vez que abrangem as formas geométricas existentes em muitos produtos submetidos a bin picking. Após a identi cação e seleção do objeto a apanhar, o manipulador deve autonomamente posicionar-se para fazer a aproximação e recolha do mesmo. A aquisição de dados é feita através de uma câmara Kinect. Dos dados recebidos apenas são trabalhados os referentes à profundidade, centrando-se assim este trabalho na análise e tratamento de nuvem de pontos. O sistema desenvolvido cumpre com os objetivos estabelecidos. Consegue localizar e apanhar objetos em várias posições e orientações. Além disso apresenta uma velocidade de processamento compatível com a aplicação em causa.
Resumo:
Iran possess huge oil reservoir and occupies second place in OPEC. Recent investigation has revealed that reservoir capacity in the country amount to 60 billion barrel of oil. Many measures has been carried out to increase production capacity of oil fields to 4.2 million barrel per day. Thus any distribution in oil exploration may leave adverse effects on social and economic activities. Unfortunately due to absence of a comprehensive CPM on environmental impact assessment, lots of environmental distribution has been occurred in land and off-shore. It is well known that implementation of EIA can reduce environmental hazards. In the present investigation, all major and minor activities associated with oil exploration is identified and subsequently their effects on physical, chemical and biological environment (aquatic) has been brought out. In this context, economical, social and cultural effects of marine oil exploration is also discussed. Subsequently, all methods of EIA were studied and best mitigation plans were drawn up both for exploitation and exploration phases.
Resumo:
A recuperação de metais a partir de resíduos é uma actividade ligada à valorização de resíduos que se afigura essencial à preservação de recursos naturais. O tratamento de resíduos metálicos é essencial para o sucesso da reciclagem. O tratamento permite diminuir contaminações com outros materiais, melhorar a valorização e diminuir os custos de transporte. Ao tratamento encontram-se associadas diferentes operações, cuja finalidade é preparar os metais de acordo com os requisitos de processo dos recicladores. A fragmentação é uma das operações de pré-tratamento mais relevantes pela sua capacidade de processamento e pela possibilidade de permitir separar resíduos contaminados com outros materiais. O presente trabalho efectua uma análise inicial ao sector e às tecnologias existentes permitindo introduzir posteriormente o caso de estudo, a instalação em Vila Nova de Gaia da empresa Constantino Fernandes Oliveira & Filhos, SA. O enfoque ao caso de estudo aborda o tema da eficiência energética, um dos principais custos de produção. Nesta perspectiva identifica pontos críticos e estabelece medidas de eficiência energética que permitam reduzir o consumo energético. As medidas propostas foram a colocação de um variador electrónico de velocidade no ventilador principal da fragmentadora e no compressor e a substituição da iluminação existente por iluminação LED. As medidas propostas permitem a redução do consumo específico de energia de 9,39 kgep/t para 8,81 kgep/t. Sendo a fragmentação uma das operações mais relevantes na actividade da instalação estudada, no presente trabalho, efectuou-se a análise do modelo operatório com recurso à aplicação STAN de análise de fluxos de materiais. O procedimento de análise envolveu a criação de vários cenários de exploração no tratamento de resíduos. O objectivo das simulações é a contabilização dos custos referentes ao tratamento dos resíduos permitindo melhorias na vertente operacional, ambiental e económica. Um dos cenários simulados foi a remoção dos veículos em fim de vida dos resíduos a fragmentar, onde se constatou que apesar de uma redução dos resíduos processados, os proveitos por quantidade processada não alteram relativamente ao modelo operatório de base. Este facto deve-se sobretudo aos custos elevados de tratamento de resíduos gerados no processo de fragmentação dos veículos em fim de vida.
Resumo:
Este estudo envolve o controlo e a optimização das condições de culturas dos microrganismos: Saccharomyces cerevisiae CCMI 396, S. cerevisiae v. lab., Aspergillus oryzae CCMI 125, Aspergillus japonicus CCMI 443, Fusarium oxysporum CCMI 866, Aspergillus niger CCMI 296 com vista à produção de oligossacáridos. Determinaram-se os parâmetros característicos das culturas de duas diferentes estirpes de Saccharomyces com diferentes fontes de carbono e em diferentes condições ambientais. O perfil de crescimento da S. cerevisiae CCMI 396 foi semelhante nos diferentes meios de cultura estudados, sendo a velocidade específica de crescimento mais elevada no meio com glucose a pH 5 e a 30°C (0,36h-1). A S. cerevisiae v. lab. Teve velocidade específica de crescimento idêntica nas mesmas condições da outra estirpe, no entanto, o perfil de crescimento foi diferente nos outros meios de cultura. Estudou-se o efeito da adição de sumo de laranja ou de tomate ao meio de cultura com sacarose e avaliou-se a evolução glucídica no meio de cultura durante o ensaio por HPLC com detector RI. Determinou-se a frutosiltransferase no sobrenadante e na fracção intracelular e determinou-se a evolução dos oligossacáridos. Numa segunda parte deste trabalho efectuaram-se culturas dos quatro fungos filamentosos com vista a avaliar a capacidade de produção, nomeadamente, de frutooligassacáridos. Os resultados mostraram que a espécie Aspergillus japonicus CCMI 443 originou, nas mesmas condições de cultura, valores superiores, sendo a percentagem de produção FOStotais/GluCtotais de 61% para as enzimas intracelulares e 40% para as enzimas no sobrenadante. ABSTRACT; This study involves control and optimization of the cultures of microorganisms: Saccharomyces cerevisiae CCMI 396, S. cerevisiae v. lab., Aspergillus oryzae CCMI 125, Aspergillus japonicus CCMI 443, Fusarium oxysporum CCMI 866, Aspergillus níger CCMI 296 for oligosaccharides production. Were determined the parameters characteristic of the cultures of two different strains of Saccharomyces with different sources of carbon and in different environmental conditions. The growth profile of S. cerevisiae CCMI 396 was similar in different cultures media, but the highest specific growth was obtained in a medium with glucose, pH 5, at 30°C (0.36h-1). S. cerevisiae v. lab. had similar growth profile in a medium with glucose but with others culture media was different. We studied the effect of adding orange juice or tomato to the culture medium with sucrose and evaluated the evolution glucidic in the culture medium during the test by HPLC with RI detector. Fructosyltransferase was determined in the extracellular and the intracellular fractions and determined the evolution of oligosaccharides. ln the second part of this work were carried out cultures of four filamentous fungi in order to assess production capacity, in particular, fructoligosaccharides. The results showed that the specie Aspergillus japonicus CCMI 443 originated in the same culture conditions, higher values and the percentage of production FOStotal/Guctotal of 61% for intracellular enzymes and 40% for extracellular enzymes.
Resumo:
The consumption of energy on the planet is currently based on fossil fuels. They are responsible for adverse effects on the environment. Renewables propose solutions for this scenario, but must face issues related to the capacity of the power supply. Wind energy offshore emerging as a promising alternative. The speed and stability are greater winds over oceans, but the variability of these may cause inconvenience to the generation of electric power fluctuations. To reduce this, a combination of wind farms geographically distributed was proposed. The greater the distance between them, the lower the correlation between the wind velocity, increasing the likelihood that together achieve more stable power system with less fluctuations in power generation. The efficient use of production capacity of the wind park however, depends on their distribution in marine environments. The objective of this research was to analyze the optimal allocation of wind farms offshore on the east coast of the U.S. by Modern Portfolio Theory. The Modern Portfolio Theory was used so that the process of building portfolios of wind energy offshore contemplate the particularity of intermittency of wind, through calculations of return and risk of the production of wind farms. The research was conducted with 25.934 observations of energy produced by wind farms 11 hypothetical offshore, from the installation of 01 simulated ocean turbine with a capacity of 5 MW. The data show hourly time resolution and covers the period between January 1, 1998 until December 31, 2002. Through the Matlab R software, six were calculated minimum variance portfolios, each for a period of time distinct. Given the inequality of the variability of wind over time, set up four strategies rebalancing to evaluate the performance of the related portfolios, which enabled us to identify the most beneficial to the stability of the wind energy production offshore. The results showed that the production of wind energy for 1998, 1999, 2000 and 2001 should be considered by the portfolio weights calculated for the same periods, respectively. Energy data for 2002 should use the weights derived from the portfolio calculated in the previous time period. Finally, the production of wind energy in the period 1998-2002 should also be weighted by 1/11. It follows therefore that the portfolios found failed to show reduced levels of variability when compared to the individual production of wind farms hypothetical offshore
Resumo:
Mestrado em Marketing