Síntese e impregnação de peneiras moleculares Fe MCM-41 derivada de sílica da casca do arroz

The mesoporous molecular sieves of the MCM-41 and FeMCM-41 type are considered promissory as support for metals used as catalysts in oil-based materials refine processes and as adsorbents for environmental protection proposes. In this work MCM-41 and FeMCM41 were synthesized using rice husk ash - RHA as alternative to the conventional silica source. Hydrothermal synthesis was the method chosen to prepare the materials. Pre-defined synthesis parameters were 100°C for 168 hours, later the precursor was calcinated at 550°C for 2 hours under nitrogen and air flow. The sieves containing different proportions of iron were produced by two routes: introduction of iron salt direct synthesis; and a modification post synthesis consisting in iron salt 1 % and 5% impregnation in the material followed by thermal decomposition. The molecular sieves were characterized by X ray diffraction XRD, Fourier transform infrared spectroscopy FT-IR, X ray fluorescence spectroscopy XFR, scanning electronic microscopy SEM, specific surface area using the BET method, Termogravimetry TG. The kinetic model of Flynn Wall was used with the aim of determining the apparent activation energy of the surfactant remove (CTMABr) in the MCM- 41 porous. The analysis made possible the morphology characterization, identifying the presence of hexagonal structure typical for mesoporous materials, as well as observation of the MCM41 and iron of characteristic bands.

Obtenção de filtro cerâmico a partir da diatomita e casca de arroz carbonizada visando tratamento de efluente têxtil

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Estudo da potencialidade da incorporação de resíduo de granito e da queima da casca do café em cerâmica vermelha

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Pirólise rápida catalítica do capim elefante utilizando materiais mesoporosos e óxidos metálicos para deoxigenação em bio-óleo

The fast pyrolysis of lignocellulosic biomass is a thermochemical conversion process for production energy which have been very atratactive due to energetic use of its products: gas (CO, CO2, H2, CH4, etc.), liquid (bio-oil) and charcoal. The bio-oil is the main product of fast pyrolysis, and its final composition and characteristics is intrinsically related to quality of biomass (ash disposal, moisture, content of cellulose, hemicellulose and lignin) and efficiency removal of oxygen compounds that cause undesirable features such as increased viscosity, instability, corrosiveness and low calorific value. The oxygenates are originated in the conventional process of biomass pyrolysis, where the use of solid catalysts allows minimization of these products by improving the bio-oil quality. The present study aims to evaluate the products of catalytic pyrolysis of elephant grass (Pennisetum purpureum Schum) using solid catalysts as tungsten oxides, supported or not in mesoporous materials like MCM-41, derived silica from rice husk ash, aimed to reduce oxygenates produced in pyrolysis. The biomasss treatment by washing with heated water (CEL) or washing with acid solution (CELix) and application of tungsten catalysts on vapors from the pyrolysis process was designed to improve the pyrolysis products quality. Conventional and catalytic pyrolysis of biomass was performed in a micro-pyrolyzer, Py-5200, coupled to GC/MS. The synthesized catalysts were characterized by X ray diffraction, infrared spectroscopy, X ray fluorescence, temperature programmed reduction and thermogravimetric analysis. Kinetic studies applying the Flynn and Wall model were performed in order to evaluate the apparent activation energy of holoceluloce thermal decomposition on samples elephant grass (CE, CEL and CELix). The results show the effectiveness of the treatment process, reducing the ash content, and were also observed decrease in the apparent activation energy of these samples. The catalytic pyrolysis process converted most of the oxygenate componds in aromatics such as benzene, toluene, ethylbenzene, etc

Avaliação dos parâmetros genéticos em progênies de meio-irmãos de uma sub-população de milho composto Flint para resistência à lagarta-da-espiga Helicoverpa zea (Bod.)

Foram estudadas 100 progênies de meio-irmãos de uma sub-população de milho (Zea mays L.) Composto Flint com o objetivo de avaliar a resistência de genótipos à lagarta-da-espiga Helicoverpa zea (Bod.). Foram obtidos os valores de danos médios da lagarta-da-espiga de 1,14 cm de comprimento na espiga determinado pela escala de Widstrom e coeficiente de variação experimental (CVE) de 23,4%. Dos parâmetros genéticos avaliados, a estimativa de herdabilidade (h²) foi de 6%, variância genética (VG) de 0,0015 cm² e variância fenotípica (VF) de 0,025 cm² para danos de H. zea. No entanto, o comprimento da ponta da bráctea e compactação da bráctea alcançaram resultados de herdabilidade de 75% e 72% respectivamente. Essa sub-população de milho apresenta variabilidade genética suficiente para utilização em programas de melhoramento, sendo que a resistência à lagarta-da-espiga pode ser obtida através da melhoria dos caracteres morfológicos diretamente relacionados à praga, como a compactação e comprimento da bráctea.

Híbridos experimentais de melão rendilhado cultivados em solo e substrato

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação in vitro da atividade antifúngica de extratos de plantas e óleo de eucalipto sobre Trichophyton mentagrophytes

O presente estudo teve como objetivo determinar a ação antifúngica de extratos de plantas medicinais e óleo de eucalipto frente ao dermatófito Trichophyton mentagropytes, visando a utilização da fitoterapia no controle. As plantas utilizadas na obtenção dos extratos foram arruda (Ruta graveolens), citronela (Cymbopogon nardus), cravo de defunto (Tagetes minuta), eucalipto (Eucalyptus spp), graviola (Annona muricata), fruta do conde (Annona spp), manga (Mangifera indica), romã (Punica granatum), flores e folhas de primavera (Bougainvillea spectabilis). Verificou-se que uso de 0,5% óleo de eucalipto no combate ao T. mentagropytes foi eficaz, já os extratos de citronela (4%) eucalipto (5%) e romã (8%) atuaram como fungistáticos e os restantes não devem ser usados contra este dermatófito porque não causaram nenhum efeito.

Desempenho de cultivares de melão rendilhado em função do sistema de cultivo

Objetivou-se com este trabalho avaliar cinco cultivares de melão rendilhado em dois sistemas de cultivo quanto às características produtivas. O experimento foi instalado em casa de vegetação na UNESP-FCAV, em Jaboticabal-SP, de novembro/05 a fevereiro/06. O delineamento experimental utilizado foi de blocos ao acaso, em esquema fatorial 5 x 2, com quatro repetições. Os fatores avaliados foram cinco híbridos de melão rendilhado (Maxim, Bônus nº2, Shinju 200, Fantasy e Louis) e dois sistemas de cultivo (no solo e em substrato a base de fibra da casca de coco). Após a colheita, foram avaliados a produção por planta (kg planta-1); diâmetro transversal (DTF) e longitudinal (DLF) do fruto, em mm; índice de formato do fruto (IFF); diâmetro transversal (DTL) e longitudinal (DLL) do lóculo, em mm; índice de formato do lóculo (IFL); diâmetro de inserção do pedúnculo (DIP), em mm; e espessura do mesocarpo (EM), em mm. Não se verificou interação significativa entre os fatores avaliados. O cultivo em substrato proporcionou maior produtividade por planta em relação ao cultivo no solo (2,51 e 1,52 kg planta-1, respectivamente), tendo a cultivar Fantasy (2,44 kg planta-1) o melhor desempenho entre as cultivares, não diferindo de Louis e Maxim. Para as características DIP, DTL e EM, foram verificados melhores desempenhos em plantas cultivadas em substrato. Para as características DTF, DLF, IFF e DLL não foram encontradas diferenças entre os sistemas de cultivo. Assim, o cultivo em substrato se destacou em relação ao cultivo no solo, tendo a cultivar Fantasy apresentado melhor desempenho comparada a Shinju 200 e Bônus nº2.