Efeito da fotoativação com LED sobre a microdureza de um compósito em cavidades com diferentes profundidades

O objetivo deste estudo foi avaliar o comportamento de três aparelhos fotoativadores, sendo que dois aparelhos utilizam a tecnologia de diodos emissores de luz (LED) (Radii-SDI; Single V-Bio art) e o ultimo é um aparelho convencional de lâmpada halógena (XL-2500-3M ESPE), sendo que o primeiro apresenta o diodo emissor de luz na extremidade do aparelho; o segundo apresenta ponteira de fibra óptica turbo e o terceiro apresenta ponteira de fibra óptica convencional. O desempenho dos aparelhos foi analisado por meio da análise de microdureza do fundo de um incremento de 2mm do compósito Z250 (3M ESPE), submetido à polimerização em diferentes profundidades: 2mm, 4mm, 6mm e 8mm. Em todos os casos, o tempo de polimerização adotado foi de 20 s. Para obtenção dos corpos de prova, foi utilizada uma matriz de dentina com uma cavidade de 3mm de diâmetro por 2mm de espessura. Para simular as diferentes profundidades de 2mm, 4mm, 6mm e 8mm, foram utilizados espaçadores de dentina em forma de anel com 2mm, 4mm, e 6mm de espessura sobre a matriz. Para o ensaio de microdureza, foram confeccionados cinco corpos de prova para cada combinação entre aparelho fotoativador e as quatro profundidades, totalizando 60 corpos de prova. . O ensaio foi realizado 15min após a polimerização. Os valores de microdureza foram obtidos a partir de cinco endentações em cada corpo de prova. Os resultados obtidos foram submetidos à análise de variância e ao teste Tukey para comparação entre os aparelhos, em cada profundidade (α=0,05). Os valores médios e desvio padrão da microdureza obtidos com os aparelhos Radii(R), Single V (S) e XL-2500(XL), a 2mm, foram respectivamente: 55,16 (±1,66), 58,56 (±1,77), 51,15 (±2,08), mostrando diferença significativa entre eles, sendo que o melhor desempenho foi obtido pelo S seguido pelo R e pelo XL. A 4mm, os valores foram R= 52,23 (±1,66 ); S= 49,04 (±2,04); XL= 47,34 (±2,69), com melhor desempenho do R em relação a XL, porém sem diferença do S. A 6mm, os valores foram R= 46,40 (±1,07); S= 43,64 (±1,56); XL= 42,12 (±1,72). Com melhor desempenho do R, seguidos pelo S e XL que não mostraram diferença entre si. Já a 8mm, os valores foram R= 41,96 (±1,09); S= 38,36(± 0,87); XL= 40,16 (±1,70), com melhor desempenho do R seguido pelo XL e este pelo S, mostrando diferença significativa entre eles. Comparando os aparelhos LED com a lâmpada halógena, pode-se observar que o Radii teve um desempenho superior a ela em todas as profundidades. Já o Single V foi superior na profundidade de 2mm, similar em 4mm e em 6mm e inferior em 8mm, mostrando que os aparelhos LED tiveram um comportamento diferenciado que talvez possa ser atribuído à presença de uma ponteira turbo no Single V. Também com base nos resultados foi possível concluir que houve uma redução significativa, dos valores de microdureza do fundo do material restaurador com o aumento da profundidade da cavidade para todos os aparelhos.

Síntese e caracterização do poli (L-ácido láctico) para uso como biomaterial

O poli (ácido L-láctico) (PLLA) é um material de grande interesse na área científica, por ser um polímero biodegradável e bioabsorvível, e pela sua grande utilização na área biomédica. Este estudo teve como objetivo a síntese de PLA através de policondensação direta e em meio supercrítico (scCO2) e sua caracterização. As duas rotas buscam um processo limpo de síntese dos polímeros, livre de solvente orgânico. Além disso, procurou-se reduzir os custos de obtenção utilizando matéria-prima nacional (ácido láctico P.A. comercial). As reações de polimerização de PLLA realizada por policondensação e em scCO2 foram feitas em dois estágios. No primeiro estágio da síntese, para ambos os processos, o pré-polímero do ácido láctico foi obtido através de uma reação simples de condensação, com retirada de água, sob atmosfera inerte de N2 e 160ºC. Na segunda etapa, para a reação de policondensação, o polímero PLLA, foi obtido a partir do pré-polímero em uma temperatura de 140ºC e sob pressão reduzida por o tempo desejado (100h, 200h e 350h). As reações em meio scCO2 foram realizadas em um reator de aço inoxidável de 100 mL equipado com uma barra de agitação magnética, sob pressão de CO2 (80atm) e a 90ºC por 4 horas. Em ambas as reações de polimerização foram usadas complexos de estanho como catalisador. No início deste trabalho foram realizadas algumas reações utilizando o D, L-ácido láctico em scCO2. Também foi realizada a síntese do lactide e a polimerização deste por abertura de anel. Para efeito comparativo, também foi realizada a polimerização do lactide comercial. Os polímeros obtidos foram caracterizados por espectroscopia de Ressonância Magnética Nuclear de Próton (1HRMN), por espectroscopia de infravermelho (IV), por cromatografia de permeação em gel (GPC), por calorimetria exploratória de varredura (DSC) e pela técnica de análise termogravimétrica (TGA) A reação de policondensação revelou ser uma rota sintética excelente na obtenção de polímeros de PLA com peso molecular variados. A formação dos polímeros a partir do monômero de ácido láctico foi confirmada pelo desaparecimento da banda de OH em 3500 cm-1 no espectro de infravermelho. O espectro de 1H-RMN de ambos os polímeros, mostrou um sinal atribuído ao hidrogênio do grupo CH3 em 1,52 ppm e um sinal atribuído aos hidrogênios do grupo do CH em 5,16 ppm, que estão de acordo com a literatura. Os polímeros obtidos possuem potencial para uso clínico como materiais de implante.

Efeitos dos ácidos propiônico e metilmalônico sobre o imunoconteúdo da subunidade de alto peso molecular dos neurofilamentos em fatias de córtex cerebral de ratos

As acidemias orgânicas são desordens metabólicas caracterizadas, bioquimicamente, pelo acúmulo de um ou mais ácidos orgânicos e, clinicamente, por disfunções neurológicas graves. Os ácidos propiônico (PA) e metilmalônico (MMA) são metabólitos presentes, em altas concentrações, nos tecidos e fluídos biológicos de pacientes afetados pelas acidemias propiônica e metilmalônica, respectivamente. Os neurofilamentos (NFs) são proteínas do citoesqueleto neuronal formados pela polimerização de três subunidades, denominadas: NF de alto peso molecular (NFH), NF de médio peso molecular (NF-M) e NF de baixo peso molecular (NF-L), com pesos moleculares aparentes de 200, 150 e 68 kDa, respectivamente. Essas proteínas são amplamente fosforiladas, sendo que seu nível de fosforilação está relacionado com a polimerização dos NFs e com a regulação das interações entre os constituintes do citoesqueleto. Neste trabalho fizemos um estudo ontogenético dos efeitos in vitro do PA e do MMA 2,5 mM sobre a imunorreatividade da subunidade NF-H em fatias de córtex cerebral de ratos de 9, 12, 17, 21 e 60 dias de idade. Para tanto utilizamos uma abordagem metodológica baseada na imunodetecção da NF-H com dois anticorpos diferentes: o anticorpo monoclonal anti NF-200 clone NE14 que se liga somente a epítopos fosforilados da NF-H e, portanto, reconhece a NF-H fosforilada; e o anticorpo monoclonal anti NF-200 clone N52 que reconhece a NF-H total, independentemente do nível de fosforilação. Nossos resultados mostraram que os metabólitos induzem alterações na imunorreatividade da NF-H presente na fração citoesquelética de maneira dependente do estágio de desenvolvimento do animal Considerando o conjunto de dados obtidos com os anticorpos NE14 e N52 na fração citoesquelética, podemos dizer que o tratamento das fatias de córtex cerebral de ratos de 9 dias aumentou o nível de fosforilação sem alterar o imunoconteúdo total; em ratos de 12 e 17 dias de vida levou a um acúmulo da subunidade NF-H na fração citoesquelética e que esta proteína está na forma fosforilada; e finalmente, em ratos de 21 e 60 dias de vida os metabólitos não alteraram os parâmetros estudados. Mostramos, também, que o acúmulo da NF-H provocado pelos metabólitos em ratos de 12 e 17 dias de vida não decorreu de um aumento na síntese da proteína, mas, provalvelmente devido a um desequilíbrio na relação NF-H solúvel/NF-H polimerizada, que favoreceu a forma polimerizada. Finalmente, mostramos um possível envolvimento de mecanismos de neurotransmissão GABAérgica e glutamatérgica para os efeitos observados em ratos de 12 e 17 dias de idade, respectivamente. Considerando que a fosforilação é um mecanismo importante para a regulação da dinâmica de polimerização dos NFs e das interações com outros componentes do citoesqueleto, sugerimos que uma desorganização na sua homeostase possa causar uma neurodegeneração, que é característica dos pacientes portadores das acidemias propiônica e metilmalônica.

Desenvolvimento de um analisador virtual para uma planta de polietileno de alta densidade

Em plantas de polimerização, uma das principais propriedades relacionadas à qualidade do produto é o índice de fluidez, ou MI. Esta propriedade é geralmente medida em laboratório, em intervalos de algumas horas. Por outro lado, as variáveis de processo estão disponíveis continuamente e são controladas com o objetivo de atingir as propriedades desejadas do produto. O desenvolvimento de um analisador virtual, que permita a estimação do MI de forma contínua, com base nestas variáveis medidas, pode levar a um melhor controle da qualidade do produto final. Este trabalho desenvolve um analisador virtual de MI para uma planta de polietileno de alta densidade (PEAD). Existem vários tipos de modelos que podem ser utilizados na implementação de um analisador virtual, assim como várias formas de correção on-line das suas estimativas. Este trabalho direciona especial atenção aos modelos semi-empíricos, e ao uso de um filtro de Kalman estendido (EKF) na correção das estimativas e dos parâmetros do modelo. O objeto de estudo desse trabalho foi um conjunto de produtos, cuja produção é realizada em dois reatores em série. Foram usados 21 conjuntos de dados representando diferentes períodos de operação da planta. Estes conjuntos de dados continham as principais variáveis de planta e os resultados de MI medidos em laboratório. A partir destes dados, foram estimados os parâmetros do modelo para cada reator. Também foi proposta e testada uma metodologia para a sintonia dos parâmetros do EKF. De posse dos modelos, do filtro e de seus respectivos parâmetros, foram gerados os resultados do analisador.

Síntese de pigmentos cerâmicos inorgânicos nanométricos e encapsulados com estrutura core-shell pela rota dos precursores poliméricos

The present work has as objective the development of ceramic pigments based in iron oxides and cobalt through the polymeric precursor method, as well as study their characteristics and properties using methods of physical, chemical, morphological and optical characterizations.In this work was used iron nitrate, and cobalt citrate as precursor and nanometer silica as a matrix. The synthesis was based on dissolving the citric acid as complexing agent, addition of metal oxides, such as chromophores ions and polymerization with ethylene glycol. The powder obtained has undergone pre-ignition, breakdown and thermal treatments at different calcination temperatures (700 °C, 800 °C, 900 °C, 1000 °C and 1100 °C). Thermogravimetric analyzes were performed (BT) and Differential Thermal Analysis (DTA), in order to evaluate the term decomposition of samples, beyond characterization by techniques such as BET, which classified as microporous materials samples calcined at 700 ° C, 800 º C and 900 º C and non-porous when annealed at 1000 ° C and 1100 º C, X-ray diffraction (XRD), which identified the formation of two crystalline phases, the Cobalt Ferrite (CoFe2O4) and Cristobalite (SiO2), Scanning Electron Microscopy (SEM) revealed the formation of agglomerates of particles slightly rounded;and Analysis of Colorimetry, temperature of 700 °C, 800 °C and 900 °C showed a brown color and 1000 °C and 1100 °C violet

Obtenção de polímeros de LCC para aplicação como antioxidante de biodiesel de soja

Biodiesel is a fuel obtained from vegetable oils, such as soy, castorbean, among others. The monoester of fatty acid of these oils have chains with mono, di and tri double connections. The presence of these insaturations are susceptible to oxidization. Antioxidants are substances able to prevent oxidization from oils, fats, fat foods, as well as esters of Alquila( biodiesel). The objective of this work is to summarize a new antioxidant from the Cashew Nut Shell Liquid (CNSL) using the electrolysis technique. A current of 2 amperes was used in a single cell of only one group and two eletrodos of stainless steel 304 in a solution of methanol, together with the eletrolits: acetic acid, sodium chloride and sodium hydroxide, for two hours of agitation. The electrolysis products are characterized by the techniques of cromatography in a thin layer, spectroscopy of infrared and gravimetric analysis. The material was submitted to tests of oxidative stability made by the techniques of spectropy of impendancy and Rancimat (EN 14112). The analyses of characterization suggest that the polimerization of the electrolytic material ocurred. The application results of these materials as antioxidants of soy biodiesel showed that the order of the oxidative stability was obtained by both techniques used

Síntese de pigmento cerâmico ferrita de cobalto utilizando planejamento experimental

Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%

Síntese e caracterização do poli(ácido láctico) para potencial uso em sistemas de liberação controlada de fármacos

With the advances in medicine, life expectancy of the world population has grown considerably in recent decades. Studies have been performed in order to maintain the quality of life through the development of new drugs and new surgical procedures. Biomaterials is an example of the researches to improve quality of life, and its use goes from the reconstruction of tissues and organs affected by diseases or other types of failure, to use in drug delivery system able to prolong the drug in the body and increase its bioavailability. Biopolymers are a class of biomaterials widely targeted by researchers since they have ideal properties for biomedical applications, such as high biocompatibility and biodegradability. Poly (lactic acid) (PLA) is a biopolymer used as a biomaterial and its monomer, lactic acid, is eliminated by the Krebs Cycle (citric acid cycle). It is possible to synthesize PLA through various synthesis routes, however, the direct polycondensation is cheaper due the use of few steps of polymerization. In this work we used experimental design (DOE) to produce PLAs with different molecular weight from the direct polycondensation of lactic acid, with characteristics suitable for use in drug delivery system (DDS). Through the experimental design it was noted that the time of esterification, in the direct polycondensation, is the most important stage to obtain a higher molecular weight. The Fourier Transform Infrared (FTIR) spectrograms obtained were equivalent to the PLAs available in the literature. Results of Differential Scanning Calorimetry (DSC) showed that all PLAs produced are semicrystalline with glass transition temperatures (Tgs) ranging between 36 - 48 °C, and melting temperatures (Tm) ranging from 117 to 130 °C. The PLAs molecular weight characterized from Size Exclusion Chromatography (SEC), varied from 1000 to 11,000 g/mol. PLAs obtained showed a fibrous morphology characterized by Scanning Electron Microscopy (SEM)

Síntese enzimática de ésteres de açúcar: surfactantes e polímeros como novos materiais ambientalmente seguros

Sugar esters are substances which possess surfactant, antifungical and bactericidal actions and can be obtained through two renewable sources of raw materials: sugars and vegetable oils. Their excellent biodegradability, allied to lhe fact that they are non toxic, insipid, inodorous, biocompatible, no-ionic, digestible and because they can resist to adverse conditions of temperature, pH and salinity, explain lhe crescent use of these substances in several sections of lhe industry. The objective of this thesis was to synthesize and characterize surfactants and polymers containing sugar branched in their structures, through enzymatic transesterification of vinyl esters and sugars, using alkaline protease from Bacillus subtilis as catalyst, in organic medium (DMF).Three types of sugars were used: L-arabinose, D-glucose and sucrose and two types of vinyl esters: vinyl laurate and vinyl adipate. Aiming to reach high conversions from substrates to products for a possible future large scale industrial production, a serie of variables was optimized, through Design of Experiments (DOE), using Response Surface Methodology (RSM).The investigated variables were: (1) enzyme concentration; (2) molar reason of substrates; (3) water/solvent rale; (4) temperature and (5) time. We obtained six distinct sugar esters: 5-0-lauroyl L-arabinose, 6-0-lauroyl D-glucose, 1'-O-lauroyl sucrose, 5-0-vinyladipoyl L-arabinose, 6-0-vinyladipoyl D-glucose and 1 '-O-vinyladipoyl sucrose, being lhe last three polymerizable. The progress of lhe reaction was monitored by HPLC analysis, through lhe decrease of sugar concentration in comparison to lhe blank. Qualitative analysis by TLC confirmed lhe formation of lhe products. In lhe purification step, two methodologies were adopted: (1) chromatographic column and (2) extraction with hot acetone. The acylation position and lhe chemical structure were determined by 13C-RMN. The polymerization of lhe three vinyl sugar esters was possible, through chemical catalysis, using H2O2 and K2S2O8 as initiators, at 60°C, for 24 hours. IR spectra of lhe monomers and respective polymers were compared revealing lhe disappearance of lhe vinyl group in lhe polymer spectra. The molar weights of lhe polymers were determined by GPC and presented lhe following results: poly (5-0-vinyladipoyl L-arabinose): Mw = 7.2 X 104; PD = 2.48; poly (6-0-vinyladipoyl D-glucose): Mw = 2.7 X 103; PD = 1.75 and poly (1'-O-vinyladipoyl sucrose): Mw = 4.2 X 104; PD = 6.57. The six sugar esters were submitted to superficial tension tests for determination of the critical micelle concentrations (CMC), which varied from 122 to 167 ppm. Finally, a study of applicability of these sugar esters, as lubricants for completion fluids of petroleum wells was' accomplished through comparative analysis of lhe efficiency of these sugar esters, in relation to three commercial lubricants. The products synthesized in this thesis presented equivalent or superior action to lhe tested commercial products

Síntese de pigmentos cerâmicos inorgânicos nanométricos pela rota dos precursores poliméricos

Considering the constant evolution of technology in growth and the need for production techniques in the ceramics area to move forward together, we sought in this study, the research and development of polymeric precursor method to obtain inorganic ceramic pigments. Method that provides quality to obtain the precursor powders of oxides and pigments at the same time, offers time and cost advantages, such as reproducibility, purity and low temperature heat treatment, control of stoichiometry. This work used chromium nitrate and iron nitrate as precursors. The synthesis is based on the dissolution of citric acid as a complexing agent, addition of metal oxides, such as ion chromophores; polymerization with ethylene glycol and doping with titanium oxide. Passing through precalcination, breakdown, thermal treatments at different temperatures of calcination (700 to 1100 oC), resulting in pigments: green for chromium oxide deposited on TiO2 (CrTiO3) and orange for iron oxide deposited on TiO2 ( FeTiO3). Noticing an increase of opacity with increasing temperature. Were performed thermal analysis (TG and ATD) in order to evaluate its thermodecomposition. The powders were also characterized by techniques such as XRD, revealing the formation of crystalline phases such as iron titanate (FeTiO3) and chrome titanate (CrTiO3), SEM, demonstrating formation of rounded particles for both oxides and Spectroscopy in the UV-Visible Region, verifying the potential variation and chromaticity os pigments. Thus, the synthesized oxides were within the requirements to be applied as pigments and shown to be possible to propose its use in ceramic materials

Estudo do mecanismo de produção de oligossacarídeos com atividades nutracêuticas a partir da quitosana por hidrólise enzimática com processo fermentativo simultâneo

The obtaining of the oligosaccharides from chitosanase, has showed interest of the pharmaceutical area in the last years due their countless functional properties. Although, the great challenge founded out is how to keep a constant and efficient production. The alternative proposed by this present work was to study the viability to develop an integrated technology, with reduced costs. The strategy used was the obtaining of the oligomers through enzymatic hydrolysis using chitosanolitic enzymes obtained straight from the fermented broth, eliminating this way the phases involved in the enzymes purification. The two chitosanases producing strains chosen for the work, Paenibacillus chitinolyticus and Paenibacillus ehimensis, were evaluated according to the behavior in the culture medium with simple sugar and in relation to the pH medium variations. The culture medium for the chitosanases induction and production was developed through addition of soluble chitosan as carbon source. The soluble chitosan was obtained using hydrochloric acid solution 0.1 M and afterwards neutralization with NaOH 10 M. The enzymatic complexes were obtained from induction process in culture medium with 0.2% of soluble chitosan. The enzymes production was verified soon after the consumption of the simple sugars by the microorganisms and the maximum chitosanolitic activity obtained in the fermented broth by Paenibacillus chitinolyticus was 249 U.L-1 and by Paenibacillus ehimensis was 495U.L-1. These two enzymatic complexes showed stability when stored at 20°C for about 91 days. The enzymes in the fermented broth by Paenibacillus chitinolyticus, when exposed at temperature of 55°C and pH 6.0, where the activity is maximum, showed 50% lost of activity after 3 hours Meanwhile, for the complex produced by Paenibacillus ehimensis, after 6 days of exposure, it was detected 100% of the activity. The chito-oligosaccharides obtained by the hydrolysis of a 1% chitosan solution, using the enzymatic complex produced by Paenibacillus chitinolyticus showed larger quantity after 9 hours hydrolysis and using the complex produced by Paenibacillus ehimensis after 20 minutes was observed the chito-ligosacharides with polymerization degree between 3 and 6 units. Evaluating these results, it was verified that the production of chitosan-oligosaccharides is possible, using a simultaneous process

Preparação de poliuretana à base de óleo de mamona

Polyurethanes are very versatile macromolecular materials that can be used in the form of powders, adhesives and elastomers. As a consequence, they constitute important subject for research as well as outstanding materials used in several manufacturing processes. In addition to the search for new polyurethanes, the kinetics control during its preparation is a very important topic, mainly if the polyurethane is obtained via bulk polymerization. The work in thesis was directed towards this subject, particularly the synthesis of polyurethanes based castor oil and isophorone diisocianate. As a first step castor oil characterized using the following analytical methods: iodine index, saponification index, refraction index, humidity content and infrared absorption spectroscopy (FTIR). As a second step, test specimens of these polyurethanes were obtained via bulk polymerization and were submitted to swelling experiments with different solvents. From these experiments, the Hildebrand parameter was determined for this material. Finally, bulk polymerization was carried out in a differential scanning calorimetry (DSC) equipment, using different heating rates, at two conditions: without catalyst and with dibutyltin dilaurate (DBTDL) as catalyst. The DSC curves were adjusted to a kinetic model, using the isoconversional method, indicating the autocatalytic effect characteristic of this class of polymerization reaction

Dispositivos flexíveis de monitoramento de pH e de deflexão mecânica à base de polianilina

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da desadaptação das selas de próteses parciais removíveis após 1 a 5 anos de uso

The non-adaptation of the removable partial prosthesis (RPP) base to fibromucosal tissue is caused by resorption of residual ridges (RRR). The onset of bone resorption, which occurs after tooth extraction and continues throughout life, is accelerated by local or systemic factors. Aim: Assess the degree of non-adaptation of removable partial prosthesis saddles and the factors that influence it. Methodology: A sectional study was conducted with 81 patients using RPP who had their prostheses installed between 2003 and 2007 (1 to 5 years of use) at the Faculty of Dentistry of the Universidade Federal do Rio Grande do Norte (UFRN). After anamnese and clinical examination, a cast was made with polyether-based material, using the base of the prosthesis to make the impression. The base of the saddle was loaded with the casting material and positioned in the mouth, applying pressure on the supports. After polymerization, the material was removed from the saddle and measurements were taken at 3 different points using a pachymeter. Results: The non-adaptation of the saddle increased significantly with years of use (p = 0.005). The tooth-tissue supported prostheses obtained higher mean non-adaptation values than those of tooth supported prostheses (p < 0.001). Flaccid mucosa showed the worst non-adaptation results, which were statistically different from resilient mucosa (p < 0.001). The greater the extension of the saddle, the greater the non-adaptation (p < 0.001). The natural tooth antagonistic arch yielded better results than did RPP and total prosthesis (p < 0.001). Saddle non-adaptation at the free end was less near the pillar tooth and greater in the more posterior region (p < 0.001). When adaptation of the supports to the niches was poor, greater saddle non-adaptation occurred than when it was good or fair (p < 0.001). Saddles located in the posterior region of the arch had greater non-adaptation than those in the anterior region (p = 0.023). Conclusion: The mean non-adaptation of the saddle to the residual ridges was 0.27 mm. It can be concluded that, even with the use of RPP, bone height reduction was slight within the 1-5-year period of use. The following are factors that influence adaptation of the RPP saddle base: years of use, age, force transmission path to the alveolar bone, location of the toothless area, antagonistic arch, type of mucosa, adaptation of supports to the niche and extension of the saddle

Avaliação do comportamento termoanalítico e oxidativo do biodiesel de mamona

In this work biodiesel was gotten through the transesterification reaction using the oil of castor as source of triglycerides and using the methylic route for obtaining of esters. For the characterization of biodiesel and its mixtures with mineral diesel oil, physical chemical parameters and several analytical techniques had been used, as well as: gas chromatography (GC), nuclear magnetic resonance of proton (1H NMR), infrared spectroscopy (IR) and thermal analysis. The chromatography confirmed the complete reaction of esters in biodiesel presenting a 97,08% conversion. The 1H - NMR presented singlet in 3,6 ppm corresponding to the hydrogen of the group ester RCOO CH3. The infrared presented a strong band in 1741 cm-1 referring to stretching C=O of ester and an average band in 1175 cm-1 referring C O deformation. With the data of thermal analysis it was possible to observe the thermal and oxidative stability of the samples changing the atmospheres of synthetic air and nitrogen, where stages of the thermal decomposition had been verified and had been attributed to the volatilization and/or decomposition of the triacylglycerides. The thermal degradation of the samples was carried through 150 and 210°C during 1, 12, 24 and 48 hours and was observed change in the thermogravimetric profile, therefore an increase in the number of stages of the thermal decomposition also occurred indicating characteristic intermediate composites of polymerization, being this confirmed through the rheological study that presented brusque increase of viscosity. The kinetic study showed that the activation energy has the following order: biodiesel > mineral diesel oil > mixtures biodiesel/diesel