883 resultados para Performance evolution due time
Resumo:
The current study examined the role of three important components in the use of structured employment interviewing in performance prediction: construct bandwidth, observed communication skill, and the stability/dynamicity of performance criteria over time. A matched sample of 242 hospitality managers was derived from a field data set provided by a large hospitality management organization. Interview data and two years of performance appraisal data were provided. Bandwidth analysis demonstrated only minimal differences in prediction between matched predictor-criterion pairs compared with predictor to overall aggregate ratings (unmatched). The communication skill analysis revealed that this interviewer rated observation significantly predicted a number of the individual performance dimensions as well as overall performance over time. Of the five interview items, the strongest overall predictor of performance was interviewer rated communication skill. The stability/dynamicity analyses demonstrated the performance criteria to be generally stable over the two year period examined, which provides support for the long held notion that performance criteria is stabile over time. However, there were two exceptions. The interview dimension customer service orientation had shifting relationships over time with four of the criteria over the two year period. The performance criteria employee development also demonstrated some instability in its relationships with predictors. Thus, some evidence of dynamicity in performance criteria was revealed. Interestingly, both of the most noteworthy findings in the study involved items that were rated differently than the others in the study. The rated interview item communication skill and the rated performance criteria client satisfaction were ratings that involved a more direct level of observation. Additional analyses also revealed evidence of a general factor of performance. These two themes are more fully covered in the discussion.
Resumo:
The increasing demand for Internet data traffic in wireless broadband access networks requires both the development of efficient, novel wireless broadband access technologies and the allocation of new spectrum bands for that purpose. The introduction of a great number of small cells in cellular networks allied to the complimentary adoption of Wireless Local Area Network (WLAN) technologies in unlicensed spectrum is one of the most promising concepts to attend this demand. One alternative is the aggregation of Industrial, Science and Medical (ISM) unlicensed spectrum to licensed bands, using wireless networks defined by Institute of Electrical and Electronics Engineers (IEEE) and Third Generation Partnership Project (3GPP). While IEEE 802.11 (Wi-Fi) networks are aggregated to Long Term Evolution (LTE) small cells via LTE / WLAN Aggregation (LWA), in proposals like Unlicensed LTE (LTE-U) and LWA the LTE air interface itself is used for transmission on the unlicensed band. Wi-Fi technology is widespread and operates in the same 5 GHz ISM spectrum bands as the LTE proposals, which may bring performance decrease due to the coexistence of both technologies in the same spectrum bands. Besides, there is the need to improve Wi-Fi operation to support scenarios with a large number of neighbor Overlapping Basic Subscriber Set (OBSS) networks, with a large number of Wi-Fi nodes (i.e. dense deployments). It is long known that the overall Wi-Fi performance falls sharply with the increase of Wi-Fi nodes sharing the channel, therefore there is the need for introducing mechanisms to increase its spectral efficiency. This work is dedicated to the study of coexistence between different wireless broadband access systems operating in the same unlicensed spectrum bands, and how to solve the coexistence problems via distributed coordination mechanisms. The problem of coexistence between different networks (i.e. LTE and Wi-Fi) and the problem of coexistence between different networks of the same technology (i.e. multiple Wi-Fi OBSSs) is analyzed both qualitatively and quantitatively via system-level simulations, and the main issues to be faced are identified from these results. From that, distributed coordination mechanisms are proposed and evaluated via system-level simulations, both for the inter-technology coexistence problem and intra-technology coexistence problem. Results indicate that the proposed solutions provide significant gains when compare to the situation without distributed coordination.
Resumo:
This study investigated the impact that mouth rinsing carbohydrate solution has on skill-specific performance and reaction time following a fatigue inducing bout of fencing in epee fencers. Nine healthy, national level epee fencers visited a laboratory on 2 occasions, separated by a minimum of 5 days, to complete a 1-minute lunge test and Stroop test pre and post fatigue. Heart rate and ratings of perceived exertion (RPE) were recorded during completion of the fatiguing protocol. Between fights the participants mouth rinsed for 10 seconds, either 25ml of 6.7% maltodextrin solution (MALT) or water (PLAC). Blood lactate and glucose were recorded at baseline, pre- and post-testing. Results showed an increase in heart rate and overall RPE over time in both conditions. There were no differences in blood glucose (F(1,8)=.63, P=.4, ηp=.07) or blood lactate levels (F(1,8)=.12, P=.70, ηp=.01) between conditions as a function of time. There was a significant improvement in lunge test accuracy during the MALT trial (F(1,8)=5.21, P=.05, ηp=.40) with an increase from pre (81.2 ±8.3%) to post (87.6 ±9.4%), whereas there was no significant change during the placebo (pre 82.1 ±8.8%, post 78.8 ±6.4%). There were no recorded differences between conditions in response time to congruent (F(1,8)=.33, P=.58, ηp=.04) or incongruent stimuli (F(1,8)=.19, P=.68, ηp=.02). The study indicates that when fatigued mouth rinsing MALT significantly improves accuracy of skill-specific fencing performance but no corresponding influence on reaction time was observed.
Resumo:
The present work analyzes the fast evolution of gated communities in Natal-RN´s urban space. Characterized by the occupation of large areas, providing private security and utilities, this kind of real estate use arises a long list of questions and issues from society and scholars, due to privatization of urban space, bending of law constraints and the lack of an integrated planning of the cities where they are built. The reasons for its fast growth in Brazil s urban areas are analyzed, considering the impact on formal urban planning and municipal services and on the identification of urbanistic, architectural pattern and constraints, as well as legal, social and economic issues. This study is based on the detailed analysis of the first three units of gated communities built in the urban space in Natal, between 1995 and 2003, including their evolution throughout time and the specific social and economic reasons for its present widespread adoption in Brazilian real estate market and, particulary, in our city. The main objective of this piece of work is to answer the why s and how s these phenomena evolved, setting a basis for the definition of adequate public policies and regulation of this kind of urban land use
Resumo:
Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica
Resumo:
Australian forest industries have a long history of export trade of a wide range of products from woodchips (for paper manufacturing), sandalwood (essential oils, carving and incense) to high value musical instruments, flooring and outdoor furniture. For the high value group, fluctuating environmental conditions brought on by changes in temperature and relative humidity, can lead to performance problems due to consequential swelling, shrinkage and/or distortion of the wood elements. A survey determined the types of value-added products exported, including species and dimensions packaging used and export markets. Data loggers were installed with shipments to monitor temperature and relative humidity conditions. These data were converted to timber equilibrium moisture content values to provide an indication of the environment that the wood elements would be acclimatising to. The results of the initial survey indicated that primary high value wood export products included guitars, flooring, decking and outdoor furniture. The destination markets were mainly located in the northern hemisphere, particularly the United States of America, China, Hong Kong, Europe (including the United Kingdom), Japan, Korea and the Middle East. Other regions importing Australian-made wooden articles were south-east Asia, New Zealand and South Africa. Different timber species have differing rates of swelling and shrinkage, so the types of timber were also recorded during the survey. Results from this work determined that the major species were ash-type eucalypts from south-eastern Australia (commonly referred to in the market as Tasmanian oak), jarrah from Western Australia, spotted gum, hoop pine, white cypress, black butt, brush box and Sydney blue gum from Queensland and New South Wales. The environmental conditions data indicated that microclimates in shipping containers can fluctuate extensively during shipping. Conditions at the time of manufacturing were usually between 10 and 12% equilibrium moisture content, however conditions during shipping could range from 5 (very dry) to 20% (very humid). The packaging systems incorporated were reported to be efficient at protecting the wooden articles from damage during transit. The research highlighted the potential risk for wood components to ‘move’ in response to periods of drier or more humid conditions than those at the time of manufacturing, and the importance of engineering a packaging system that can account for the environmental conditions experienced in shipping containers. Examples of potential dimensional changes in wooden components were calculated based on published unit shrinkage data for key species and the climatic data returned from the logging equipment. The information highlighted the importance of good design to account for possible timber movement during shipping. A timber movement calculator was developed to allow designers to input component species, dimensions, site of manufacture and destination, to see validate their product design.
Resumo:
Prior research shows that both cognitive ability (Schmidt & Hunter, 1998) and personality measures (Poropat, 2009; Hough & Furnham, 2003) are valid predictors of job performance. The dynamic nature of the relationships between cognitive ability and personality measures with performance over time spent on the job is less understood and thus this paper explores their relationships. Although there is much research to suggest that the predictive relationship between cognitive ability and performance decreases over years of tenure (e.g., Hulin, Henry, & Noon, 1990), other research suggests that the relationship between cognitive ability and performance will increase over time (Kolz, McFarland, & Silverman, 1988). In regard to personality, this study provides a critical test of two competing theories. The first position holds that the validity of personality degrades over time. Support for this position comes from the “ubiquitous” nature of the simplex pattern in individual differences (Humphreys, 1985). It follows that personality validities should perform like cognitive ability in this respect, and thus decline over time. In contrast to this viewpoint, the alternative position contends that the predictive relationship between personality variables and performance increases over time, with the correlation becoming larger in magnitude and more positive in direction over years of tenure. The results of this study support the latter position; personality validities predicted long term performance outcomes.
Resumo:
Unmanned aerial vehicles (UAVs) frequently operate in partially or entirely unknown environments. As the vehicle traverses the environment and detects new obstacles, rapid path replanning is essential to avoid collisions. This thesis presents a new algorithm called Hierarchical D* Lite (HD*), which combines the incremental algorithm D* Lite with a novel hierarchical path planning approach to replan paths sufficiently fast for real-time operation. Unlike current hierarchical planning algorithms, HD* does not require map corrections before planning a new path. Directional cost scale factors, path smoothing, and Catmull-Rom splines are used to ensure the resulting paths are feasible. HD* sacrifices optimality for real-time performance. Its computation time and path quality are dependent on the map size, obstacle density, sensor range, and any restrictions on planning time. For the most complex scenarios tested, HD* found paths within 10% of optimal in under 35 milliseconds.
Resumo:
Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2015.
Resumo:
Study of batch profile evolution and scouring effect due to the wave and current impacts in the coastal zone has been one of the most important issues in coastal engineering research projects during the past decades .to construct the coastal protective structures such piers, breakwaters and seawalls, it is necessary to estimate the scouring depth and bed level changes in the vicinity of such structures. Furthermore, the time - dependent changes in the equilibrium profile of the surf zone can be of great importance in designing coastal structures. Because of the importance of coastal engineering study in Iran due to the existence of two important coastal area located in the north and south parts of the country, and due to the lack of classified data in this respect (particularly the effect of sea level rise on coastal morphology) in the present study, based on the available data of Bandar Anzali region, an analysis of the coastal zone behavior is made. Bed level elevations are measured and compared with the theoretical equilibrium profile. It is shown that the behavior of the coastal zone in the region is consistent with the dean (equilibrium profile . In the next stage, following extensive investigations, the bed level changes due to a rise in sea level at different locations in the surf zone are estimated. Finally based on the results obtained for profile evolution due to sea level rise, the conclusion is made for design of coastal structures located in the study area. The results obtained from the present study indicate that the sea level rise can have a significant effect on beach profile and resulting erosion in the study area. The results are graphically presented with can be used for design purposes and establishing a data base for the coastal zone in the study region. It is believed that the present work can be regarded as a contribution to the existing knowledge of coast process in the study area and referred to as a basis for the future coastal research projects.
Resumo:
The new oil reservoirs discoveries in onshore and ultra deep water offshore fields and complex trajectories require the optimization of procedures to reduce the stops operation during the well drilling, especially because the platforms and equipment high cost, and risks which are inherent to the operation. Among the most important aspects stands out the drilling fluids project and their behavior against different situations that may occur during the process. By means of sedimentation experiments, a correlation has been validated to determe the sedimentation particles velocity in variable viscosity fluids over time, applying the correction due to effective viscosity that is a shear rate and time function. The viscosity evolution over time was obtained by carrying out rheologic tests using a fixed shear rate, small enough to not interfere in the fluid gelling process. With the sedimentation particles velocity and the fluid viscosity over time equations an iterative procedure was proposed to determine the particles displacement over time. These equations were implemented in a case study to simulate the cuttings sedimentation generated in the oil well drilling during stops operation, especially in the connections and tripping, allowing the drilling fluid project in order to maintain the cuttings in suspension, avoiding risks, such as stuck pipe and in more drastic conditions, the loss of the well
Resumo:
The present work analyzes the fast evolution of gated communities in Natal-RN´s urban space. Characterized by the occupation of large areas, providing private security and utilities, this kind of real estate use arises a long list of questions and issues from society and scholars, due to privatization of urban space, bending of law constraints and the lack of an integrated planning of the cities where they are built. The reasons for its fast growth in Brazil s urban areas are analyzed, considering the impact on formal urban planning and municipal services and on the identification of urbanistic, architectural pattern and constraints, as well as legal, social and economic issues. This study is based on the detailed analysis of the first three units of gated communities built in the urban space in Natal, between 1995 and 2003, including their evolution throughout time and the specific social and economic reasons for its present widespread adoption in Brazilian real estate market and, particulary, in our city. The main objective of this piece of work is to answer the why s and how s these phenomena evolved, setting a basis for the definition of adequate public policies and regulation of this kind of urban land use
Resumo:
Méthodologie: Modèle de régression quantile de variable instrumentale pour données de Panel utilisant la fonction de production partielle
Resumo:
Vendors provide reference process models as consolidated, off-the-shelf solutions to capture best practices in a given industry domain. Customers can then adapt these models to suit their specific requirements. Traditional process flexibility approaches facilitate this operation, but do not fully address it as they do not sufficiently take controlled change guided by vendors' reference models into account. This tension between the customer's freedom of adapting reference models, and the ability to incorporate with relatively low effort vendor-initiated reference model changes, thus needs to be carefully balanced. This paper introduces process extensibility as a new paradigm for customizing reference processes and managing their evolution over time. Process extensibility mandates a clear recognition of the different responsibilities and interests of reference model vendors and consumers, and is concerned with keeping the effort of customer-side reference model adaptations low while allowing sufficient room for model change.
Resumo:
The Silk Road Project was a practice-based research project investigating the potential of motion capture technology to inform perceptions of embodiment in dance performance. The project created a multi-disciplinary collaborative performance event using dance performance and real-time motion capture at Deakin University’s Deakin Motion Lab. Several new technological advances in producing real-time motion capture performance were produced, along with a performance event that examined the aesthetic interplay between a dancer’s movement and the precise mappings of its trajectories created by motion capture and real-time motion graphic visualisations.