Computer program for the analysis of non-prismatic beams

One of the major problems in the analysis of beams with Moment of Inertia varying along their length, is to find the Fixed End Moments, Stiffness, and Carry-Over Factors. In order to determine Fixed End Moments, it is necessary to consider the non-prismatic member as integrated by a large number of small sections with constant Moment of Inertia, and to find the M/EI values for each individual section. This process takes a lot of time from Designers and Structural Engineers. The object of this thesis is to design a computer program to simplify this repetitive process, obtaining rapidly and effectively the Final Moments and Shears in continuous non-prismatic Beams. For this purpose the Column Analogy and the Moment Distribution Methods of Professor Hardy Cross have been utilized as the principles toward the methodical computer solutions. The program has been specifically designed to analyze continuous beams of a maximum of four spans of any length, integrated by symmetrical members with rectangular cross sections and with rectilinear variation of the Moment of Inertia. Any load or combination of uniform and concentrated loads must be considered. Finally sample problems will be solved with the new Computer Program and with traditional systems, to determine the accuracy and applicability of the Program.

Reservoir system analysis, conservation : Hydrologic Engineering Center computer program 23-J2-L253.

At head of cover title: Generalized computer program.

An ESL/EFL Computer Assisted Language Instruction (CALIS) Micro-Teaching Lesson on Coherence Through Sentences When Writing Compositions in the Foreign Language Classroom

[Sin resumen]

Design, development and assessment of the Java Intelligent Tutoring System

The "Java Intelligent Tutoring System" (JITS) research project focused on designing, constructing, and determining the effectiveness of an Intelligent Tutoring System for beginner Java programming students at the postsecondary level. The participants in this research were students in the School of Applied Computing and Engineering Sciences at Sheridan College. This research involved consistently gathering input from students and instructors using JITS as it developed. The cyclic process involving designing, developing, testing, and refinement was used for the construction of JITS to ensure that it adequately meets the needs of students and instructors. The second objective in this dissertation determined the effectiveness of learning within this environment. The main findings indicate that JITS is a richly interactive ITS that engages students on Java programming problems. JITS is equipped with a sophisticated personalized feedback mechanism that models and supports each student in his/her learning style. The assessment component involved 2 main quantitative experiments to determine the effectiveness of JITS in terms of student performance. In both experiments it was determined that a statistically significant difference was achieved between the control group and the experimental group (i.e., JITS group). The main effect for Test (i.e., pre- and postiest), F( l , 35) == 119.43,p < .001, was qualified by a Test by Group interaction, F( l , 35) == 4.98,p < .05, and a Test by Time interaction, F( l , 35) == 43.82, p < .001. Similar findings were found for the second experiment; Test by Group interaction revealed F( 1 , 92) == 5.36, p < .025. In both experiments the JITS groups outperformed the corresponding control groups at posttest.

Software para la manipulación de Bases de Datos Espaciales PostGIS

In this work is presented a developed software, which primary objective is to allow the manipulation of PostGIS spatial databases from a graphic interface programmed in Java language

Entorn de programació pel robot Stäubli mitjantçant MatLab, aplicació a un sistema de recol·lecció de peces basat en visió artificial

Els objectius del projecte són: realitzar un intèrpret de comandes en VAL3 que rebi les ordres a través d’una connexió TCP/IP; realitzar una toolbox de Matlab per enviar diferents ordres mitjançant una connexió TCP/IP; adquirir i processar mitjançant Matlab imatges de la càmera en temps real i detectar la posició d’objectes artificials mitjançant la segmentació per color i dissenyar i realitzar una aplicació amb Matlab que reculli peces detectades amb la càmera. L’abast del projecte inclou: l’estudi del llenguatge de programació VAL3 i disseny de l’ intèrpret de comandes, l’estudi de les llibreries de Matlab per comunicació mitjançant TCP/IP, per l’adquisició d’imatges, pel processament d’imatges i per la programació en C; el disseny de la aplicació recol·lectora de peces i la implementació de: un intèrpret de comandes en VAL3, la toolbox pel control del robot STAUBLI en Matlab i la aplicació recol·lectora de peces mitjançant el processament d’imatges en temps real també en Matlab

Desenvolupament d’una biblioteca per a la generació de diagrames vectorials basat en l’entorn gràfic de JAVA2D i aplicació d’aquesta biblioteca per a la implementació d’una eina per al desenvolupament de diagrames d’E/R

En aquest projecte es vol implementar una llibreria en Java, que proporcioni les eines necessàries per a crear diagrames i esquemes. Es vol proporcionar a la llibreria un conjunt d’objectes bàsics, també mètodes i funcionalitats suficients per a gestionar aquests objectes. Per altra part, es vol implementar una aplicació per a dissenyar diagrames Entitat-Relació que utilitzi aquesta llibreria

Development of DAL and DAPL languages for building distributed applications

A common characteristic among parallel/distributed programming languages is that the one language is used to specify not only the overall organisation of the distributed application, but also the functionality of the application. That is, the connectivity and functionality of processes are specified within a single program. Connectivity and functionality are independent aspects of a distributed application. This thesis shows that these two aspects can be specified separately, therefore allowing application designers to freely concentrate on either aspect in a modular fashion. Two new programming languages have been developed for specifying each aspect. These languages are for loosely coupled distributed applications based on message passing, and have been designed to simplify distributed programming by completely removing all low level interprocess communication. A suite of languages and tools has been designed and developed. It includes the two new languages, parsers, a compilation system to generate intermediate C code that is compiled to binary object modules, a run-time system to create, manage and terminate several distributed applications, and a shell to communicate with the run-tune system. DAL (Distributed Application Language) and DAPL (Distributed Application Process Language) are the new programming languages for the specification and development of process oriented, asynchronous message passing, distributed applications. These two languages have been designed and developed as part of this doctorate in order to specify such distributed applications that execute on a cluster of computers. Both languages are used to specify orthogonal components of an application, on the one hand the organisation of processes that constitute an application, and on the other the interface and functionality of each process. Consequently, these components can be created in a modular fashion, individually and concurrently. The DAL language is used to specify not only the connectivity of all processes within an application, but also a cluster of computers for which the application executes. Furthermore, sub-clusters can be specified for individual processes of an application to constrain a process to a particular group of computers. The second language, DAPL, is used to specify the interface, functionality and data structures of application processes. In addition to these languages, a DAL parser, a DAPL parser, and a compilation system have been designed and developed (in this project). This compilation system takes DAL and DAPL programs to generate object modules based on machine code, one module for each application process. These object modules are used by the Distributed Application System (DAS) to instantiate and manage distributed applications. The DAS system is another new component of this project. The purpose of the DAS system is to create, manage, and terminate many distributed applications of similar and different configurations. The creation procedure incorporates the automatic allocation of processes to remote machines. Application management includes several operations such as deletion, addition, replacement, and movement of processes, and also detection and reaction to faults such as a processor crash. A DAS operator communicates with the DAS system via a textual shell called DASH (Distributed Application SHell). This suite of languages and tools allowed distributed applications of varying connectivity and functionality to be specified quickly and simply at a high level of abstraction. DAL and DAPL programs of several processes may require a few dozen lines to specify as compared to several hundred lines of equivalent C code that is generated by the compilation system. Furthermore, the DAL and DAPL compilation system is successful at generating binary object modules, and the DAS system succeeds in instantiating and managing several distributed applications on a cluster.

Fuzzy concepts and formal methods

It has been recognised that formal methods are useful as a modelling tool in requirements engineering. Specification languages such as Z permit the precise and unambiguous modelling of system properties and behaviour. However some system problems, particularly those drawn from the information systems problem domain, may be difficult to model in crisp or precise terms. It may also be desirable that formal modelling should commence as early as possible, even when our understanding of parts of the problem domain is only approximate. This thesis suggests fuzzy set theory as a possible representation scheme for this imprecision or approximation. A fuzzy logic toolkit that defines the operators, measures and modifiers necessary for the manipulation of fuzzy sets and relations is developed. The toolkit contains a detailed set of laws that demonstrate the properties of the definitions when applied to partial set membership. It also provides a set of laws that establishes an isomorphism between the toolkit notation and that of conventional Z when applied to boolean sets and relations. The thesis also illustrates how the fuzzy logic toolkit can be applied in the problem domains of interest. Several examples are presented and discussed including the representation of imprecise concepts as fuzzy sets and relations, system requirements as a series of linguistically quantified propositions, the modelling of conflict and agreement in terms of fuzzy sets and the partial specification of a fuzzy expert system. The thesis concludes with a consideration of potential areas for future research arising from the work presented here.

Teoria da ressonância adaptativa através da linguagem Java para detecção e classificação de e-mails indesejados

Pós-graduação em Engenharia Elétrica - FEIS

An experiment on a unified control construct /

Bibliography: p. 34.

SPORRT; simplified polynomial root finding at a remote terminal.

"Supported in part by ... Grant no. US NSF GP-9665."