MISCIBILITY OF POLY(N-VINYL-2-PYRROLIDONE) WITH POLY(ETHER SULFONE) AND 2 PHENOLPHTHALEIN-BASED POLYMERS

Blends of poly(N-vinyl-2-pyrrolidone) (PVP) with poly(ether sulphone) and two phenolphthalein-based polymers, viz. phenolphthalein poly(ether ether sulphone) and phenolphthalein poly(ether ether ketone) were prepared by casting from a common solvent and studied by differential scanning calorimetry. It was found that all the PVP blends are miscible and show a single, composition-dependent glass transition temperature (T(g)). The T(g)-composition dependence has been analysed by the use of the Gordon-Taylor equation. The values of the k parameter in the Gordon-Taylor equation obtained are all not high for the three pairs, in accordance with the fact that there is no strongly specific interaction between PVP and any of the other polymers.

ISOPOLYMOLYBDIC ACID-POLY(4-VINYL)PYRIDINE FILM MODIFIED ELECTRODE

Electrochemical polymerization of 4-vinylpyridine produced a uniform poly(4-vinyl)pyridine(PVP) film on the glassy carbon (GC) electrode surface. The isopolymolybdic acid-PVP film-modified electrode was prepared by soaking the PVP/GC electrode in the 0.05 M H2SO4 aqueous solution containing 0.005 M isopolymolybdic acid (H4Mo8O26). The latter (catalyst) is incorporated and held in the PVP film electrostatically. The electrochemical behavior and electrocatalytic properties of this H4Mo8O26-PVP/GC electrode was described. The results indicate that this modified electrode has good stability and electrocatalytic activity on the reduction of chlorate and bromate ions in aqueous solution. The catalytic process is regarded as an EC mechanism.

MISCIBILITY OF POLY(N-VINYL-2-PYRROLIDONE) WITH A COPOLYAMIDE

Blends of poly(N-vinyl-2-pyrrolidone) (PVP) with a copolyamide (CoPA) randomly composed of 1:1:1 (wt) nylon 6, nylon 66 and nylon 610 structural units were prepared by casting from a common solvent. They were found to be miscible and show a single, composition-dependent glass transition temperature (T(g)). The addition of PVP to CoPA significantly lowers the crystallinity owing to an increasing T(g) of the system. The observed miscibility is proposed to be the result of specific interactions between the proton acceptor groups of PVP and the amide groups of CoPA.

聚乙烯醇/聚乙烯基吡咯烷酮共混体系的结晶行为

用DSC、WAXD和SAXS研究了聚乙烯醇(PVAl)/聚乙烯基吡咯烷酮(PVP)共混体系的结晶行为.PVAl的结晶度随PVP含量增加而减少,并存在结晶度为零的组成(PVAl)的重量分数约为50％.与纯PVAl相比,共混物的温度区间T_m-T_g减小,表明PVP对PVAl的结晶起抑制作用.共混物中PVAl的结晶速度下降,具体表现为PVAl过冷区随PVP含量增加而扩大,动力学速度常数减小,球晶增长速度下降.纯PVAl和共混体系的等温结晶速率均遵循Avrami方程.退火样品的长周期、片晶厚度和过渡层厚度大于相同组成未退火样品.两者长周期随PVP含量增长加显著增大,片晶厚度增长次之,过渡层厚度变化不大.

聚乙烯吡啶化学修饰电极预富集-石墨炉原子吸收法测定酒石酸锑钾的研究

本文研究了聚乙烯吡啶(PVP)化学修饰电极预富集——石墨炉原子吸收法测定酒石酸锑钾的方法。结果表明,在 pH 为3.5的 HCl 介质中,酒石酸锑钾浓度在5.4×10~(-8)～2.2×10~(-6)g/ml 范围内,与吸光度值呈良好的线性关系。对1.1×10~(-6)g/ml 的酒石酸锑钾溶液平行测定9次,相对标准偏差为4.9%,最低检测限为1.6×10~(-8)g/ml。17种异离子及有机物不干扰测定,回收率在97～103%之间,结果令人满意。

聚乙烯醇/聚乙烯基吡咯烷酮共混体系相容性研究

用DSC、FTIR、SAXS和测定Flory-Huggins相互作用参数等方法对聚乙二醇(PVA1)/聚乙烯基吡咯烷酮(PVP)共混体系的研究。结果表明,该体系具有完全互容的性质。共混物只有一个玻璃化转变温度。用DMSO作溶剂浇铸的膜光学透明。PVA1的长周期和片晶厚度均随PVP含量增加而增大,但后者增大的幅度比前者小得多,表明PVP和PVA1的非晶部分形成均相并夹入到球晶内部。共混物中PVP羰基吸收峰和PVA1的羟基吸收峰与相应均聚物相比,在红外光谱图中皆向低频方向迁移,迁移波数随第二组分含量的增加而增大。表明二者间有氢键生成。用平衡熔点计算的Flory-Huggins相互作用参数为-0.88。

真鲷(Pagrosomus major)胚胎冷冻保存损伤机理及冷冻精子遗传物质稳定性研究

本文对真鲷心跳期胚胎对5种常用渗透性抗冻剂（DMSO、甘油、甲醇、丙二醇、乙二醇）和3种非渗透性抗冻剂（PVP、PEG-8000、蔗糖）的耐受性进行了研究。渗透性抗冻剂分6个浓度梯度（5%；10%；15%；20%；25%；30%）和3个时间组（10min；30min；1h）。非渗透性抗冻剂中，PVP、PEG-8000分3个浓度梯度（5%、10%、15%）和2个时间组（10min、30min），蔗糖为4个浓度梯度（5%、10%、15%、20%）和2个时间组（10min、30min）。实验结果表明，在渗透性抗冻剂组中，浓度为5%的处理组的孵化率（>90%）与对照组差异均不显著，随着抗冻剂浓度增大及处理时间的延长，真鲷心跳期胚胎的孵化率显著下降（P<0.05），在最高浓度的最长处理时间中胚胎孵化率均降到了0。总体上，真鲷心跳期胚胎对五种渗透性抗冻剂的耐受性从小到大依次为：甲醇 < 甘油 < 乙二醇 < DMSO < 丙二醇。对影响胚胎孵化率的三个因素（抗冻剂、浓度、时间）进行的因素效应分析结果表明，三种因素对孵化率的影响显著（P<0.05），并且浓度效应 > 时间效应 > 抗冻剂效应。在非渗透性抗冻剂组中，蔗糖组胚胎孵化率未呈显著变化；PVP组随着浓度及时间的增大，孵化率显著下降（P<0.05）；PEG-8000组随着浓度增大孵化率显著下降（P<0.05），但在两个时间组间差异不显著。相同处理情况下PEG-8000对真鲷心跳期胚胎的毒性要小于PVP。因素效应分析比较结果表明仅时间效应不显著，且抗冻剂效应 > 浓度效应 > 时间效应。 对所用各种抗冻剂进行了渗透压测量，实验中使用的渗透性抗冻剂（5%-30%）的渗透压值在959-7980mOsm/kg之间，均高于使用海水的渗透压值（919mOsm/kg）；使用的非渗透性抗冻剂的渗透压值在316-1040mOsm/kg之间，除20%蔗糖渗透压值（1040mOsm/kg）高于海水外，其他非渗透性抗冻剂的渗透压值均要低于海水。对孵化率与相应的溶液渗透压值进行相关回归分析结果表明，渗透性抗冻剂的渗透压与孵化率呈显著的负相关（P<0.05），而非渗透性抗冻剂的渗透压与孵化率相关不显著。渗透性抗冻剂组的回归分析结果表明，二次方程的曲线拟合度最高，得到的回归方程分别为：Y10min = -2×10-8X2 10min - 6×10-5 X 10min + 1.5635 （R2 = 0.713），Y30min= 5×10-8X2 30min－0.0007 X 30min + 2.097（R2 = 0.681），Y1h = 7×10-8X2 1h－0.0008 X 1h+ 2.0397（R2= 0.725）。 在真鲷胚胎对抗冻剂耐受性实验的基础上，挑选五种抗冻剂--10%DMSO、5%甘油、10%甲醇、20%丙二醇、10%乙二醇，浸泡真鲷心跳期胚胎30min后，分别以超速（130℃/min）、快速（20℃/min）、慢速（3℃/min）的速度降温并使用低温显微镜进行观察，依次记录Toif（油球结冰）、Teif（胚胎外部结冰）、Tiif（胚胎内部结冰）等结冰点，Toif值在-9~-23℃之间；Teif值在-21~-35℃之间；Tiif值在-21~-52℃之间。结冰顺序为先油球结冰，然后胚胎外部结冰随之内部马上瞬间变黑形成内部冰晶。随着降温速度的提高，各结冰温度值显著下降。各抗冻剂之间的Teif及Tiif值不同，Toif值之间没有显著差异。对两种玻璃化冷冻方法进行模拟观察，发现胚胎冰晶形成的顺序与非玻璃化过程不同--先内部结冰然后逐渐蔓延至外部形成外部冰晶，而且模拟玻璃化的内部结冰温度Tiif值（-52.56℃）显著（P<0.05）低于使用低浓度的同种抗冻剂超速降温组的Tiif值（-40.11℃）。在快速及慢速降温组中，20%丙二醇组的Tiif要显著的低于其他组（P<0.05）；在超速降温中，甲醇组的Tiif值要显著的低于其他组（P<0.05）。在Tiif小于30℃的实验组中获得形态完整胚胎的比例平均仅有30.77%；在Tiif大于30℃的实验组中获得形态完整胚胎的平均比例高达70.37%，模拟玻璃化组达到100%。各抗冻剂之间，复温后胚胎形态完整率10%甲醇组最高（77.78%）；其次依次为10%乙二醇（66.67%）、20%丙二醇（55.56%）和10%DMSO（55.56%）；5%甘油组最低（11.11%）；推测甲醇的对胚胎的渗透效果要好于其他组。综上推测：使用丙二醇、甲醇作为抗冻剂以及玻璃化冷冻保存方法对真鲷心跳期胚胎超低温保存也许较为合适。 我们对低温保存的真鲷精子核DNA损伤进行了研究以期为下一步胚胎遗传物质稳定性研究提供参考依据。研究方法为单细胞凝胶电泳（SCGE），针对研究对象，在实验过程中对传统的碱性单细胞凝胶电泳在铺胶方法、电泳条件等进行了改进。对精子细胞进行预处理，在碱性电泳液中使核DNA双链解链变性后电泳，EB染色lOmin后，在荧光显微镜下观察，每次随机观察50个左右的核DNA。结果表明，对荧光显微镜下观察到的精子核按彗尾长度及荧光强度划分等级，出现损伤的精子核DNA的损伤程度主要为轻度损伤和中度损伤，很少见有完全损伤的真鲷精子核。经5%、10%、18%、20%、25%、30%DMSO冷冻保存后的精子彗星率分别为33.47％ ± 8.95％; 35.91％ ± 19.44％; 48.95％ ± 8.90％; 43.33％ ± 11.19％; 55.80％ ± 38.94％。鲜精彗星率为31.43 ％ ± 2.68％。对比真鲷冷冻精液与新鲜精液的精子DNA的损伤状况，表明仅用30％ DMSO冷冻精子DNA损伤状况与鲜精差异显著(P<0.05)。 综上所述，渗透性抗冻剂对胚胎的毒性与其渗透压值呈显著的负相关关系。丙二醇对真鲷心跳期胚胎毒性最小，甲醇较其他抗冻剂能更好的渗透入胚胎；玻璃化方法能显著降低Tiif值并能更好的保持超低温保存后胚胎的形态完整性，因此，使用丙二醇、甲醇作为抗冻剂以及玻璃化冷冻保存方法对真鲷心跳期胚胎超低温保存也许较为合适。常规使用的用于超低温保存真鲷精子的DMSO（浓度<15%）不会对精子核物质稳定性造成明显影响。由于胚胎较精子结构要复杂许多，对于真鲷胚胎损伤机理的研究还有大量工作可以开展。

Effect of cryoprotectants on hatching rate of red seabream (Pagrus major) embryos

The objectives were to investigate the effect of cryoprotectants on the hatching rate of red seabream embryos. Heart-beat embryos were immersed in: five permeable cryoprotectants, dimethyl sulfoxide (DMSO), glycerol (Gly), methanol (MeOH), 1,2-propylene glycol (PG), and ethylene glycol (EG). in concentrations of 5-30% for 10, 30, or 60 min; and two non-permeable cryoprotectants: polyvinylpyrrolidone (PVP), and sucrose (in concentrations of 5-20% for 10 or 30 min). The embryos were then washed and incubated in filtered seawater until hatching occurred. The hatching rate of the embryos treated with permeable cryoprotectants decreased (P < 0.05) with increased concentration and duration of exposure. In addition, PG was the least toxic permeable cryoprotectant, followed by DMSO and EG, whereas Gly and MeOH were the most toxic. At a concentration of 15% and 30 min exposure, the hatching rate of the embryos immersed in PG was 93.3 +/- 7.0% (mean +/- S.D.), however. in DMSO. EG, Gly. and MeOH, it was 82.7 +/- 10.4, 22.0 +/- 5.7, 0.0 +/- 0.0, and 0.0 +/- 0.0%, respectively. Hatching rate of embryos treated with PVP decreased (P < 0.05) with the increase of concentration and exposure time, whereas for embryos treated with sucrose, there was no significant decrease in comparison with the control at the concentrations used. (C) 2008 Elsevier Inc. All rights reserved.

Oxidative carbonylation of aniline over a polymer-supported palladium-copper catalyst

The polymer-supported bimetallic catalyst FVP-PdCl2-2CuCl(2) (PVP, poly(N-vinyl-2-pyrrolidone), obtained in situ by the addition of CuCl2 to an alcoholic solution of PVP-PdCl2, exhibits high selectivity and activity for the oxidative carbonylation of aniline with carbon monoxide and oxygen to ethyl N-phenylcarbamate in the presence of a base (NaOAc) under atmospheric pressure. The strong synergic effect of Pd-Cu gives rise to a clear increase in the selectivity and activity. (C) 2000 Elsevier Science B.V. All rights reserved.

Polymer-supported palladium-manganese bimetallic catalyst for the oxidative carbonylation of amines to carbamate esters

The polymer-supported bimetallic catalyst PVP-PdCl2-MnCl2 (PVP=poly(N-vinyl-2-pyrrolidone)) exhibits high activity and selectivity for the oxidative carbonylation of amines with carbon monoxide and oxygen to carbamate esters under atmospheric pressure in the presence of a base (NaOAc). This catalyst is prepared by the addition of MnCl2 to the alcoholic solution of PVP-PdCl2 in situ. A remarkable bimetallic synergic effect and the role of PVP in PVP-PdCl2-MXn (MXn=the second transition metal component such as NiCl2, CoCl2, MnCl2 and FeCl3) gives rise to an obvious increase in the conversion and selectivity for the reaction. Among the second metal components tested, Mn-Pd exerts the strongest synergic effect. (C) 1999 Elsevier Science B.V. All rights reserved.

Nickel-promoted ligand-free palladium-catalyzed Suzuki coupling reaction

A Ni-promoted ligand-free palladium catalyst system for Suzuki coupling of aryl bromides has been developed in high efficiency under mild reaction conditions. It was obtained in situ by introducing NiCl2 to PdCl2/PVP using a parallel high-throughput screening technique. A wide range of aryl bromides bearing a variety of functional groups was evaluated.

Development of a LCST membrane forming system for cellulose acetate ultrafiltration hollow fiber

A novel lower critical solution temperature (LCST) membrane forming system containing cellulose acetate (CA)/poly (vinyl pyrrolidone) (PVP 3 60K)/N-methyl-2-pyrrolidone (NMP)/1,2-propanediol with a weight ratio of 24.0:5.0:62.6:8.4 had been developed. CA hollow fiber ultrafiltration (UF) membranes were fabricated using the dry-wet spinning technique. The fibers were post-treated with a 200 mg/L hypochlorite solution over a period of 6 It at pH 7. The experimental results showed that water flux of a membrane decreased while retention increased with increasing CA concentration in a dope. It was concluded that the membrane pore size decreased with increasing CA concentration. The membrane fouling tendency for BSA was 3 times higher than that for PVP 24K. (C) 2004 Elsevier B.V. All rights reserved.

Multiple Dynamic Processes Contribute to the Complex Steady Shear Behavior of Cross-Linked Supramolecular Networks of Semidilute Entangled Polymer Solutions.

Molecular theories of shear thickening and shear thinning in associative polymer networks are typically united in that they involve a single kinetic parameter that describes the network -- a relaxation time that is related to the lifetime of the associative bonds. Here we report the steady-shear behavior of two structurally identical metallo-supramolecular polymer networks, for which single-relaxation parameter models break down in dramatic fashion. The networks are formed by the addition of reversible cross-linkers to semidilute entangled solutions of PVP in DMSO, and they differ only in the lifetime of the reversible cross-links. Shear thickening is observed for cross-linkers that have a slower dissociation rate (17 s(-1)), while shear thinning is observed for samples that have a faster dissociation rate (ca. 1400 s(-1)). The difference in the steady shear behavior of the unentangled vs. entangled regime reveals an unexpected, additional competing relaxation, ascribed to topological disentanglement in the semidilute entangled regime that contributes to the rheological properties.

Mechanism of Shear Thickening in Reversibly Cross-linked Supramolecular Polymer Networks.

We report here the nonlinear rheological properties of metallo-supramolecular networks formed by the reversible cross-linking of semi-dilute unentangled solutions of poly(4-vinylpyridine) (PVP) in dimethyl sulfoxide (DMSO). The reversible cross-linkers are bis-Pd(II) or bis-Pt(II) complexes that coordinate to the pyridine functional groups on the PVP. Under steady shear, shear thickening is observed above a critical shear rate, and that critical shear rate is experimentally correlated with the lifetime of the metal-ligand bond. The onset and magnitude of the shear thickening depend on the amount of cross-linkers added. In contrast to the behavior observed in most transient networks, the time scale of network relaxation is found to increase during shear thickening. The primary mechanism of shear thickening is ascribed to the shear-induced transformation of intrachain cross-linking to interchain cross-linking, rather than nonlinear high tension along polymer chains that are stretched beyond the Gaussian range.

Examination of the flow rheological and textural properties of polymer gels composed of poly(methylvinylether-co-maleic anhydride) and poly(vinylpyrrolidone): rheological and mathematical interpretation of textural parameters.

The purpose of this study was to mathematically characterize the effects of defined experimental parameters (probe speed and the ratio of the probe diameter to the diameter of sample container) on the textural/mechanical properties of model gel systems. In addition, this study examined the applicability of dimensional analysis for the rheological interpretation of textural data in terms of shear stress and rate of shear. Aqueous gels (pH 7) were prepared containing 15% w/w poly(methylvinylether-co-maleic anhydride) and poly(vinylpyrrolidone) (PVP) (0, 3, 6, or 9% w/w). Texture profile analysis (TPA) was performed using a Stable Micro Systems texture analyzer (model TA-XT 2; Surrey, UK) in which an analytical probe was twice compressed into each formulation to a defined depth (15 mm) and at defined rates (1, 3, 5, 8, and 10 mm s-1), allowing a delay period (15 s) between the end of the first and beginning of the second compressions. Flow rheograms were performed using a Carri-Med CSL2-100 rheometer (TA Instruments, Surrey, UK) with parallel plate geometry under controlled shearing stresses at 20.0°?±?0.1°C. All formulations exhibited pseudoplastic flow with no thixotropy. Increasing concentrations of PVP significantly increased formulation hardness, compressibility, adhesiveness, and consistency. Increased hardness, compressibility, and consistency were ascribed to enhanced polymeric entanglements, thereby increasing the resistance to deformation. Increasing probe speed increased formulation hardness in a linear manner, because of the effects of probe speed on probe displacement and surface area. The relationship between formulation hardness and probe displacement was linear and was dependent on probe speed. Furthermore, the proportionality constant (gel strength) increased as a function of PVP concentration. The relationship between formulation hardness and diameter ratio was biphasic and was statistically defined by two linear relationships relating to diameter ratios from 0 to 0.4 and from 0.4 to 0.563. The dramatically increased hardness, associated with diameter ratios in excess of 0.4, was accredited to boundary effects, that is, the effect of the container wall on product flow. Using dimensional analysis, the hardness and probe displacement in TPA were mathematically transformed into corresponding rheological parameters, namely shearing stress and rate of shear, thereby allowing the application of the power law (??=?k?n) to textural data. Importantly, the consistencies (k) of the formulations, calculated using transformed textural data, were statistically similar to those obtained using flow rheometry. In conclusion, this study has, firstly, characterized the relationships between textural data and two key instrumental parameters in TPA and, secondly, described a method by which rheological information may be derived using this technique. This will enable a greater application of TPA for the rheological characterization of pharmaceutical gels and, in addition, will enable efficient interpretation of textural data under different experimental parameters.