Concrete Pavement Mixture Design and Analysis (MDA): Evaluation of Foam Drainage Test to Measure Air Void Stability in Concrete

The stability of air bubbles in fresh concrete can have a profound influence of the potential durability of the system, because excessive losses during placement and consolidation can compromise the ability of the mixture to resist freezing and thawing. The stability of air void systems developed by some air entraining admixtures (AEAs) could be affected by the presence of some polycarboxylate-based water reducing admixtures (WRAs). The foam drainage test provides a means of measuring the potential stability of air bubbles in a paste. A barrier to acceptance of the test was that there was little investigation of the correlation with field performance. The work reported here was a limited exercise seeking to observe the stability of a range of currently available AEA/WRA combinations in the foam drainage test; then, to take the best and the worst and observe their stabilities on concrete mixtures in the lab. Based on the data collected, the foam drainage test appears to identify stable combinations of AEA and WRA.

Laboratory Performance Evaluation of CIR-Emulsion and its Comparison Against CIR-Foam Test Results from Phase 2, TR-474, 2009

Currently, no standard mix design procedure is available for CIR-emulsion in Iowa. The CIR-foam mix design process developed during the previous phase is applied for CIR-emulsion mixtures with varying emulsified asphalt contents. Dynamic modulus test, dynamic creep test, static creep test and raveling test were conducted to evaluate the short- and long-term performance of CIR-emulsion mixtures at various testing temperatures and loading conditions. A potential benefit of this research is a better understanding of CIR-emulsion material properties in comparison with those of CIR-foam material that would allow for the selection of the most appropriate CIR technology and the type and amount of the optimum stabilization material. Dynamic modulus, flow number and flow time of CIR-emulsion mixtures using CSS- 1h were generally higher than those of HFMS-2p. Flow number and flow time of CIR-emulsion using RAP materials from Story County was higher than those from Clayton County. Flow number and flow time of CIR-emulsion with 0.5% emulsified asphalt was higher than CIR-emulsion with 1.0% or 1.5%. Raveling loss of CIR-emulsion with 1.5% emulsified was significantly less than those with 0.5% and 1.0%. Test results in terms of dynamic modulus, flow number, flow time and raveling loss of CIR-foam mixtures are generally better than those of CIR-emulsion mixtures. Given the limited RAP sources used for this study, it is recommended that the CIR-emulsion mix design procedure should be validated against several RAP sources and emulsion types.

Manual of Laboratory Mix Design Procedure for Cold In-Place Recycling using Foamed Asphalt (CIR-foam), TR-474, 2007

The objective is to determine the optimum percentage of water needed to produce the best foam properties for a given asphalt binder. The optimum water content is determined by achieving the maximum expansion ratio and half-life of the foamed asphalt. Expansion ratio is defined as the maximum volume over its original volume and half-life is defined as the time in seconds for foam to become a half of its maximum volume.

Montmorillonite clay based polyurethane nanocomposite as substrate for retinal pigment epithelial cell growth.

The subretinal transplantation of retinal pigment epithelial cells (RPE cells) grown on polymeric supports may have interest in retinal diseases affecting RPE cells. In this study, montmorillonite based polyurethane nanocomposite (PU-NC) was investigated as substrate for human RPE cell growth (ARPE-19 cells). The ARPE-19 cells were seeded on the PU-NC, and cell viability, proliferation and differentiation were investigated. The results indicated that ARPE-19 cells attached, proliferated onto the PU-NC, and expressed occludin. The in vivo ocular biocompatibility of the PU-NC was assessed by using the HET-CAM; and through its implantation under the retina. The direct application of the nanocomposite onto the CAM did not compromise the vascular tissue in the CAM surface, suggesting no ocular irritancy of the PU-NC film. The nanocomposite did not elicit any inflammatory response when implanted into the eye of rats. The PU-NC may have potential application as a substrate for RPE cell transplantation.

Proteins influencing foam formation in wine and beer: the role of yeast

This review focuses on the role of proteins in the production and maintenance of foam in both sparkling wines and beer. The quality of the foam in beer but especially in sparkling wines depends, among other factors, on the presence of mannoproteins released from the yeast cell walls during autolysis. These proteins are hydrophobic, highly glycosylated, and their molecular masses range from 10 to 200 kDa characteristics that allow mannoproteins to surround and thus stabilize the gas bubbles of the foam. Both the production and stabilization of foam also depend on other proteins. In wine, these include grape-derived proteins such as vacuolar invertase; in beer, barley-derived proteins, such as LTP1, protein Z, and hordein-derived polypeptides, are even more important in this respect than mannoproteins

Foam-forming properties of Ilex paraguariensis (mate) saponin: foamability and foam lifetime analysis by Weibull equation

Saponins are natural soaplike foam-forming compounds widely used in foods, cosmetic and pharmaceutical preparations. In this work foamability and foam lifetime of foams obtained from Ilex paraguariensis unripe fruits were analyzed. Polysorbate 80 and sodium dodecyl sulfate were used as reference surfactants. Aiming a better data understanding a linearized 4-parameters Weibull function was proposed. The mate hydroethanolic extract (ME) and a mate saponin enriched fraction (MSF) afforded foamability and foam lifetime comparable to the synthetic surfactants. The linearization of the Weibull equation allowed the statistical comparison of foam decay curves, improving former mathematical approaches.

Ultrakevyen rahtialuksen kansiluukkujen sekä luukkujen siirto- ja varastointijärjestelmän suunnittelu hyödyntäen kevytrakennekonsepteja

Tämän työn tarkoituksena oli tutkia miten rahtialuksen kansiluukut voitaisiin valmistaa mahdollisimman kevyiksi. Katettavan ruuman pinta-ala on n. 10 m x 40 m. Luukkujen suuresta jännevälistä johtuen, rakenteelta vaaditaan suurta jäykkyyttä. Erilaisina vaihtoehtoina tutkittiin vaahtomaista alumiinia, alumiinisia kennorakenteita ja polyuretaanisia sandwich-rakenteita. Työssä vertailtiin myös erilaisia geometrisia ratkaisuja, joilla kansiluukkujen jäykkyyttä pyrittiin lisäämään ja sitä kautta pääsemään pienempään materiaalin tarpeeseen. Geometriaa suunniteltaessa huomioitiin myös vaikutukset ruuman tilavuuteen ja lainsäädännön asettamat reunaehdot. Lainsäädännöstä saatiin esimerkiksi turvakaiteiden minimikorkeus, joka vaikuttaa suoraan ruuman tilavuuteen, kun aluksen korkeimmaksi kohdaksi on valittu laivan keskilinja ja tämä korkeus on annettu suunnittelun lähtötietona. Tietokoneavusteisen lujuuslaskennan avulla eri vaihtoehdoista muodostettiin elementtimallit. Malleja varioimalla ja tuloksia vertailemalla saatiin selville kevyin mahdollinen rakenne ja geometria. Malleista saatiin selville myös luukkujen tukireaktiovoimat, eli voimat, jotka luukut kohdistavat aluksen muihin rakenteisiin. Lisäksi työssä mietittiin erilaisia tapoja ruuman avaamiseen ja avaamistavan vaikutusta kansiluukkujen painoon, geometriaan ja ruuman tilavuuteen.

Suitability of foam coating on application of thin liquid films

This work aimed to find out the suitability of foam as medium in application of thin liquid films. This consists of research over phenomena related to foam physics and behaviour. Solutions and mixtures to be foamed, foaming agents, foam generation and application methods were evaluated. Over the evaluated solutions and mixtures coating paste and CMC did not foam well. Latex and PVA solutions were foamable and the best solution for foam use was starch. PVA and casein can be used as foaming agents, but the best results were achieved with sodium dodecyl sulphate (SDS). SDS works well with starch solutions producing fine and stable foam. Foaming was done with simple mixers where pressurized air was fed to the solution. The foaming works fine when enough shear force is used together with sufficient foaming agent concentration. Foam application with curtain, rod and cylinder methods with a gap between the application device and paper were not usable because of high coating amount. Coating amounts were smallest with the blade method which achieved 0.9 g/m2 starch layer. Although some strength decrease was expected because of the foaming agent, it dit not have significant effect. The targeted coating amount of 0.5 g/m2 was not achieved due to the limitations with the methods. More precise foam application methods are needed. Continuous foam generation and feed to the paper surface with controllable device such as application teeth could improve the results.

Determination of hydroquinone in a square wave voltammetry procedure using a graphite-polyurethane composite electrode

In order to a better characterization of a graphite-polyurethane composite intended to be used as a voltammetric sensor, the performance in a square wave voltammetric procedure was investigated. Using hydroquinone (HQ) as a probe, the electrode showed to be useful in square wave voltammetry with limit of detection of 0.28 µmol L-1, with recoveries between 99.1 and 101.5%. The results of the proposed method agreed with HPLC ones within 95% confidence level.

Estudos histológico, histoquímico e ultra-estrutural de fígados e linfonodos de bovinos com presença de macrófagos espumosos ("foam cells")

Foram examinadas amostras de fígado, rins, baço e linfonodos hepáticos, mesentéricos, retro-mandibulares, pré-escapulares e mediastínicos de 12 lotes em um total de 120 animais, envolvendo diferentes faixas etárias, todos oriundos do Estado de Mato Grosso. Os animais haviam sido mantidos em pastos onde Brachiaria decumbens e Brachiaria brizantha eram as forrageiras predominantes. Macroscopicamente o fígado desses animais mostrava coloração amarelada, mais evidente após 24 horas de fixação em formol a 10%. Nos linfonodos hepáticos e mesentéricos foram evidenciadas, na superfície de corte, estriações esbranquiçadas de forma radiada na cortical e medular com pequenas áreas brancas nodulares multifocais principalmente na medular. Em muitos casos, associado com essas áreas foram vistos focos de aspecto hemorrágico. Microscopicamente foram encontradas, no fígado, linfonodos hepáticos e mesentéricos, células com citoplasma espumoso, muitas das quais multinucleadas. Nos linfonodos hepáticos e mesentéricos estes infiltrados estavam associados a áreas de necrose e hemorragia. No fígado, as células de citoplasma espumoso estavam presentes em todo parênquima, de forma irregular, geralmente formando nódulos ao redor da veia centrolobular. Estas células não se coravam pelo ácido periódico de Schiff (PAS) e apenas fracamente na coloração de gordura pelo Oil Red O. Na ultra-estrutura as células de citoplasma espumoso apresentavam fendas, parcial ou totalmente delimitadas por membrana, que representam a imagem negativa de cristais, presentes também no citoplasma dos hepatócitos.

Relação entre macrófagos espumosos ("foam cells") no fígado de bovinos e ingestão de Brachiaria spp no Brasil

Com o objetivo de estabelecer uma relação etiológica e caracterizar, cronologicamente, o aparecimento de macrófagos espumosos (foam cells), comuns em fígados de bovinos oriundos das regiões de clima tropical do Brasil, foram reexaminados cortes histológicos de fígado de bovinos dos arquivos do Setor de Anatomia Patológica da Embrapa-Projeto Sanidade Animal, RJ. O material utilizado provinha de investigações sobre causas de mortandades em bovinos nas regiões Norte, Centro-Oeste e Sudeste do Brasil, realizadas de 1970 a 1991. Foram estudados 55 fígados de bovinos afetados por enfermidades variadas. Somente foram usados casos em que o tipo de pastagem era conhecido. Essa alteração não foi encontrada de 1970 até o final de 1975, embora 40 amostras (72,7%) tenham sido coletadas nesse período. A presença de macrófagos espumosos, observada a partir de 1976, coincidiu com a introdução da gramínea Brachiaria decumbens var. australiana no Brasil. Algumas amostras eram provenientes de bovinos que apresentaram histórico de fotossensibilização, na época atribuída ao fungo Pithomyces chartarum. Os achados indicam que essas alterações hepáticas são relacionadas com a ingestão de Brachiaria spp.

Immunization by subcutaneous implants of polyester-polyurethane sponges coupled with antigen

A new protocol is described for immunization of outbred Swiss mice. The procedure is based on subcutaneous implantation of antigen-coupled polyester-polyurethane sponges cut into disks of 10 mm in diameter vs 2 mm in thickness. Antigen coupling was performed by overnight incubation of the sponge with a solution of ovalbumin (Ova) (2 mg/ml) diluted in sodium carbonate buffer, pH 9.6. The amount of ovalbumin that was taken up by the sponge was between 71.4 to 82.5 µg. This was estimated by comparing the Ova absorbance at 280 nm in coating buffer solutions before and after incubation. To compare the efficiency of the proposed method, experimental groups immunized with the antigen in the presence of adjuvants (10 µg in Al(OH)3 or 100 µg in complete Freund's adjuvant (CFA)) were run in parallel. The data obtained after the 3rd week of immunization indicate that both cellular and humoral immune responses were achieved. These were assayed by antigen-induced footpad swelling and ELISA (specific antibodies), respectively. The levels of both immune responses elicited were similar to the responses observed in mice immunized with ovalbumin in the presence of Al(OH)3. The method might represent an advantage when immunizing with pathogenic antigens. Preliminary experiments have suggested that the antigen remains immobilized or bound to the sponge for a long period of time, since there is an increment on the cell population inside the sponges after boosting the animals. If so, the undesirable effects of immunization would be reduced.

DESIDRATAÇÃO DA POLPA DE ACEROLA (Malpighia emarginata D.C.) PELO PROCESSO "FOAM-MAT"

Foi elaborado um suplemento alimentar em pó, a partir da desidratação da polpa de frutos de acerola utilizando o método "FOAM-MAT". Vários testes utilizando diferentes agentes químicos, que favorecem à formação da espuma, foram realizados, tendo sido escolhido o experimento que mais se ajustou ao parâmetro de densidade recomendado como ideal (0,1 a 0,6). Na condição experimental definida, a polpa foi formulada e desidratrada em estufa de secagem com circulação de ar, a uma temperatura de 60 a 70°C, por 90 minutos, obtendo-se um produto em pó, com umidade final de 7,2%. Em paralelo ao experimento, foi efetuada uma caracterização química da polpa de acerola. O produto em pó obtido, foi embalado em sacos metalizados de 25 gramas e submetido a um estudo de estabilidade por 3 meses. Os resultados encontrados, mostraram que o produto elaborado apresentou elevado teor de vitamina C, em um nível 10 vezes maior do que na polpa integral.

Effect of processing parameters on the mechanical properties of short Kevlar aramid fibre-thermoplastic polyurethane composite

The effect of various processing parameters, such as nip gap, friction ratio and roll temperature, on the tensile properties of short Kevlar aramid fibre-thermoplastic polyurethane composite has been investigated and the tensile and tear fracture surfaces have been characterised using a scanning electron microscope. A nip gap of 0.45 mm, a friction ratio of 1.15 and a roll temperature of 62°C was found to give optimum mechanical properties. Scanning electron microscopy study revealed a higher extent of fibre orientation in the milling direction in the above condition.

Scanning Electron Microscopy Studies on Tear and Wear Failure of Short Kevlar Fiber-Thermoplastic- Polyurethane Composite

Tear and wear properties of short kevlar fiber, thermoplastic polcurethane (TPU) composite with respect to fiber loading-and fiber onentation has been studied and the fracture surfaces were examined under scanning electron microscope (SEM). Tear strength first decreased up to 20 phr fiber loading and then gradually increased with increasing fiber loading. Anisotropy in tear strength was evident beyond a fiber loading of 20 phr. Tear fracture surface of unfilled TPU showed sinusoidal folding characteristics of high strength matrix. At low fiber loading the tear failure was mainly due to fibermatrix failure whereas at higher fiber loading the failure occurred by fiber breakage. Abrasion loss shows a continuous rise with increasing fiber loading, the loss in the transverse orientation of fibers being higher than that in the longitudinal orientation. The abraded surface showed lone cracks and ridges parallel to the direction of abrasion indicating an abrasive wear mechanism. In the presence of fber the abrasion loss was mainly due to fiber low.