472 resultados para PEDOT:PSS
Resumo:
Power system stabilizer (PSS) is one of the most important controllers in modern power systems for damping low frequency oscillations. Many efforts have been dedicated to design the tuning methodologies and allocation techniques to obtain optimal damping behaviors of the system. Traditionally, it is tuned mostly for local damping performance, however, in order to obtain a globally optimal performance, the tuning of PSS needs to be done considering more variables. Furthermore, with the enhancement of system interconnection and the increase of system complexity, new tools are required to achieve global tuning and coordination of PSS to achieve optimal solution in a global meaning. Differential evolution (DE) is a recognized as a simple and powerful global optimum technique, which can gain fast convergence speed as well as high computational efficiency. However, as many other evolutionary algorithms (EA), the premature of population restricts optimization capacity of DE. In this paper, a modified DE is proposed and applied for optimal PSS tuning of 39-Bus New-England system. New operators are introduced to reduce the probability of getting premature. To investigate the impact of system conditions on PSS tuning, multiple operating points will be studied. Simulation result is compared with standard DE and particle swarm optimization (PSO).
Resumo:
The well-known power system stabilizer (PSS) is used to generate supplementary control signals for the excitation system of a generator so as to damp low frequency oscillations in the power system concerned. Up to now, various kinds of PSS design methods have been proposed and some of them applied in actual power systems with different degrees. Given this background, the small-disturbance eigenvalue analysis and large-disturbance dynamic simulations in the time domain are carried out to evaluate the performances of four different PSS design methods, including the Conventional PSS (CPSS), Single-Neuron PSS (SNPSS), Adaptive PSS (APSS) and Multi-band PSS (MBPSS). To make the comparisons equitable, the parameters of the four kinds of PSSs are all determined by the steepest descent method. Finally, an 8-unit 24-bus power system is employed to demonstrate the performances of the four kinds of PSSs by the well-established eigenvalue analysis as well as numerous digital simulations, and some useful conclusions obtained.
Resumo:
This paper addresses the voltage rise constraints that are initiated from increased renewable generation resources in low voltage distribution networks. In this paper, an approach which is able to mitigate these voltage rise constraints and allow for increased distributed generator penetration is presented. The proposed approach involves utilizing the distribution transformers static tap changer to reduce the distribution feeder voltage setpoint. The proposed approach is modeled on a generic low voltage distribution network using the PSS SINCAL© simulation software package and is also implemented in a real low voltage distribution network to verify its practicality. Results indicate that this approach can be implemented to mitigate the voltage rise constraint and increase small-scale embedded generator penetration in a high proportion of low voltage feeders while avoiding any substantial network costs.
Resumo:
The purpose of the present investigation was to evaluate the effectiveness of the psychological component of the Queensland Academy of Sport (QAS) Health Screening Questionnaire in screening for injury/illness characteristics among elite athletes. In total, 793 scholarship athletes (409 females and 384 males) ranging in age from 11 to 41 years (M = 19, SD = 4.4) across 20 sports at the QAS in Brisbane, Australia, completed the QAS Health Screening Questionnaire. Psychological risk factors examined were life stress and mood, as measured by the Perceived Stress Scale - 10 (PSS-10) and the Brunel Mood Scale (BRUMS) respectively, in addition to disordered eating behaviours and history of diagnosed psychological disorders. Medical risk factors examined included asthma and back pain. Single-factor MANOVAs showed multivaritate effects for injury, second injury, back pain, asthma, anxiety disorder diagnosis, and fasting. Discriminant function analyses demonstrated that life stress and mood scores had significant utility in correctly classifying injury and second injury status, asthma, back pain, anxiety, and eating disorder diagnosis, in addition to the use of fasting and vomiting as weight control methods. The present findings suggest that the psychology component of the QAS Health Screening Questionnaire demonstrates significant utility as a screening tool regarding injury/illness characteristics among elite athletes.
Resumo:
Stress is implicated in the development and course of psychotic illness, but the factors that influence stress levels are not well understood. The aim of this study was to examine the impact of neuropsychological functioning and coping styles on perceived stress in people with first-episode psychosis (FEP) and healthy controls (HC). Thirty-four minimally treated FEP patients from the Early Psychosis Prevention and Intervention Centre, Melbourne, Australia, and 26 HC participants from a similar demographic area participated in the study. Participants completed a comprehensive neuropsychological test battery as well as the Coping Inventory for Stressful Situations (task-, emotion- and avoidance-focussed coping styles) and Perceived Stress Scale (PSS). Linear regressions were used to determine the contribution of neuropsychological functioning and coping style to perceived stress in the two groups. In the FEP group, higher levels of emotion-focussed and lower levels of task-focussed coping were associated with elevated stress. Higher premorbid IQ and working memory were also associated with higher subjective stress. In the HC group, higher levels of emotion-focussed coping, and contrary to the FEP group, lower premorbid IQ, working memory and executive functioning, were associated with increased stress. Lower intellectual functioning may provide some protection against perceived stress in FEP.
Resumo:
PURPOSE Vocational recovery is a primary treatment goal of young people with first-episode psychosis (FEP), yet treatment in this domain is often delayed due to concerns that it might be too stressful. This study aimed to examine whether a relationship exists between vocational status and level of perceived stress and daily hassles in FEP. METHODS Forty-seven FEP participants were recruited upon admission to the Early Psychosis Prevention and Intervention Centre (EPPIC), Melbourne. Demographics, psychopathology, perceived stress (Perceived Stress Scale; PSS) and daily hassles (Hassles Scale; HS) were measured. RESULTS Regarding vocational status, 19 participants were unemployed, 13 were employed, 14 were students, and 1 reported 'home duties'. ANOVAs and post hoc tests comparing the first three groups on perceived stress and daily hassles revealed that the mean PSS Total and mean PSS Distress scores of the employed group were significantly lower than those of the unemployed and student groups. Regarding hassles scores, the employed group had a significantly lower mean Hassles Intensity score than the unemployed group. Results were largely unchanged when covariates were included. There were no significant differences between the three groups in levels of anxiety, negative or positive symptoms. The employed group reported lower depression than the student group, but this finding disappeared after controlling for gender. CONCLUSIONS These results provide preliminary evidence supporting the notion that working or studying is not associated with increased perceived stress or daily hassles in FEP. The findings require replication in larger samples and in different phases of psychosis.
Resumo:
Abstract Purpose The aim of this case study is to describe patients' responses to nursing care following the implementation of a person-centred model in a radiation oncology department. Method An instrumental case study design utilised surveys to collect data on a range of key patient outcomes: patient satisfaction (PSS), informational issues (RSEP), quality of life (FACT_G), comfort (RTCQ), and emotional status (HADS). This occurred at the beginning of, and twelve months following, the implementation of the new model of care. Results This study demonstrated that, although adverse effects of radiotherapy continue to affect patient well-being in the latter part of their course of radiation therapy, patients continue to be satisfied with nursing care. There were significant differences between groups in perceptions of the care environment and the use of the nurse as an acknowledged source of information are noteworthy, since these variables were key targets of the new model of care. The finding that nurses were seen by the post-implementation cohort as more likely to be a source of information is an important indicator that the nurses' presence was noted by patients, and they generally reported high levels of functioning despite undergoing a curative course of radiotherapy. Conclusion The person-centred nursing approach in the radiotherapy setting has contributed to some improvements in the provision of patient care. Aspects of this study may assist in planning further nursing interventions for patients undergoing radiotherapy for cancer, and continue to enhance the contribution of the radiation oncology nurse to improved patient outcomes.
Resumo:
Flexible multilayer electrodes that combine high transparency, high conductivity, and efficient charge extraction have been deposited, characterised and used as the anode in organic solar cells. The anode consists of an AZO/Ag/AZO stack plus a very thin oxide interlayer whose ionization potential is fine-tuned by manipulating its gap state density to optimise charge transfer with the bulk heterojunction active layer consisting of poly(n-3- hexylthiophene-2,5-diyl) and phenyl-C61-butyric acid methyl ester (P3HT:BC61BM). The deposition method for the stack was compatible with the low temperatures required for polymer substrates. Optimisation of the electrode stack was achieved by modelling the optical and electrical properties of the device and a power conversion efficiency of 2.9% under AM1.5 illumination compared to 3.0% with an ITO-only anode and 3.5% for an ITO:PEDOT electrode. Dark I-V reverse bias characteristics indicate very low densities of occupied buffer states close to the HOMO level of the hole conductor, despite observed ionization potential being high enough. Their elimination should raise efficiency to that with ITO:PEDOT.
Resumo:
Background Schizophrenia is associated with lower pre-morbid intelligence (IQ) in addition to (pre-morbid) cognitive decline. Both schizophrenia and IQ are highly heritable traits. Therefore, we hypothesized that genetic variants associated with schizophrenia, including copy number variants (CNVs) and a polygenic schizophrenia (risk) score (PSS), may influence intelligence. Method IQ was estimated with the Wechsler Adult Intelligence Scale (WAIS). CNVs were determined from single nucleotide polymorphism (SNP) data using the QuantiSNP and PennCNV algorithms. For the PSS, odds ratios for genome-wide SNP data were calculated in a sample collected by the Psychiatric Genome-Wide Association Study (GWAS) Consortium (8690 schizophrenia patients and 11 831 controls). These were used to calculate individual PSSs in our independent sample of 350 schizophrenia patients and 322 healthy controls. Results Although significantly more genes were disrupted by deletions in schizophrenia patients compared to controls (p = 0.009), there was no effect of CNV measures on IQ. The PSS was associated with disease status (R 2 = 0.055, p = 2.1 × 10 -7) and with IQ in the entire sample (R 2 = 0.018, p = 0.0008) but the effect on IQ disappeared after correction for disease status. Conclusions Our data suggest that rare and common schizophrenia-associated variants do not explain the variation in IQ in healthy subjects or in schizophrenia patients. Thus, reductions in IQ in schizophrenia patients may be secondary to other processes related to schizophrenia risk. © Cambridge University Press 2013.
Resumo:
Tämän maisterintutkielman tutkimusalueena on liettuan kielioppi. Liettua on yksi vanhakantaisimmista yhä puhuttavista indoeurooppalaisista kielistä, joiden balttilaiseen ryhmään kuuluu sen ohella enää ainoastaan latvia. Liettuan kieli on Suomessa varsin tuntematon, vaikka valtaosa sen puhujista asuu täältä verrattain lyhyen matkan päässä. Siitä ei tätä kirjoitettaessa ole ilmestynyt suomen kielellä juuri muuta oppimateriaalia kuin yksi suppeahko asiointisanasto ja pieni sanakirja. Mitään varsinaista oppikirjaa tai kielioppia ei ole kirjoitettu. Tämän työn yhtenä tarkoituksena onkin siten paikata kielen melkoista suomeksi painetun oppimateriaalin puutetta. Työn varsinaiseksi tutkimuskohteeksi on otettu osa suomen ja liettuan kielten verbijärjestelmästä – nominaalimuodot ja niiden käyttö. Nominaalimuodoilla tarkoitetaan ei-finiittisiä verbimuotoja, jotka eivät voi yksinään esiintyä lauseen predikaattina ja joita käytetään nimensä mukaisesti nominien tavoin. Työssä luodaan ensinnä verrattain laaja katsaus suomen kielen infinitiiveihin ja partisiippeihin, minkä jälkeen siirrytään perusteellisesti tarkastelemaan liettuan kielen tärkeimpiä nominaalimuotoja: infinitiiviä, partisiippia, puolipartisiippia, adverbiaalipartisiippia ja supiinia. Tarkastelun pääpaino kohdistuu partisiippeihin. Yhtenä työn tavoitteista on esitellä, mitä eri nominaalimuotoja kielissä esiintyy, miten ne muodostetaan ja mihin tarkoituksiin niitä käytetään. Tämän lisäksi työhön sisältyy vertaileva näkökulma: siinä halutaan selvittää, millaisia tärkeimpiä yhtäläisyyksiä ja eroja kielten nominaalimuotojen välillä esiintyy. Käytetty lähestymistapa on siten kontrastiivinen eli kielten synkroniseen vertailuun perustuva. Kielten nominaalimuotojen välisten erojen ja yhteisten piirteiden valaisemiseksi työhön on sisällytetty molemmilla kielillä runsaasti esimerkkejä ja muotojen muodostamissääntöjä kuvaavia taulukoita. Suomen kielen osalta työn tärkeimpinä lähteinä ovat Nykysuomen käsikirja ja Iso suomen kielioppi. Liettuan verbimuotoja kuvaavat taulukot ja lisäksi monet esimerkkilauseista perustuvat puolestaan Liettuan kielen instituutin julkaisemaan teokseen Dabartinės lietuvių kalbos gramatika. Työn loppuosassa on laajahko liettuankielinen tiivistelmä, joka tekee työstä käyttökelpoisen myös liettuaa äidinkielenään puhuvalle, suomen kielestä kiinnostuneelle henkilölle. Tehtyjen vertailujen tärkeimpinä johtopäätöksinä voidaan todeta, että suomen kielen nominaalimuodoista infinitiivien käyttöalue on liettuan infinitiivin sovellusaluetta laajempi. Erityisesti suomen toisen ja kolmannen infinitiivimuodon eri käyttötarkoituksia kohti löytyy liettuan kielestä useita eri nominaalimuotoja. Sen sijaan suomen I ja II partisiippi sekä liettuan partisiippi ovat verrattain usein käyttötavoiltaan toisiaan muistuttavia. Avainsanat: liettuan kieli, verbit, nominaalimuodot, vertaileva kielentutkimus
Resumo:
Since 1997 the Finnish Jabal Haroun Project (FJHP) has studied the ruins of the monastery and pilgrimage complex (Gr. oikos) of Aaron located on a plateau of the Mountain of Prophet Aaron, Jabal an-Nabi Harûn, ca. 5 km to the south-west of the UNESCO World Heritage site of Petra in Jordan. The state of conservation and the damaging processes affecting the stone structures of the site are studied in this M.A. thesis. The chapel was chosen as an example, as it represents the phasing and building materials of the entire site. The aim of this work is to act as a preliminary study with regards to the planning of long-term conservation at the site. The research is empirical in nature. The condition of the stones in the chapel walls was mapped using the Illustrated Glossary on Stone Deterioration, by the ICOMOS International Scientific Committee for Stone. This glossary combines several standards and systems of damage mapping used in the field. Climatic conditions (temperature and RH %) were monitored for one year (9/2005-8/2006) using a HOBO Microstation datalogger. The measurements were compared with contemporary measurements from the nearest weather station in Wadi Musa. Salts in the stones were studied by taking samples from the stone surfaces by scraping and with the “Paper Pulp”-method; with a poultice of wet cellulose fiber (Arbocel BC1000) and analyzing what main types of salts were to be found in the samples. The climatic conditions on the mountain were expected to be rapidly changing and to differ clearly from conditions in the neighboring areas. The rapid changes were confirmed, but the values did not differ as much as expected from those nearby: the 12 months monitored had average temperatures and were somewhat drier than average. Earlier research in the area has shown that the geological properties of the stone material influence its deterioration. The damage mapping showed clearly, that salts are also a major reason for stone weathering. The salt samples contained several salt combinations, whose behavior in the extremely unstable climatic conditions is difficult to predict. Detailed mapping and regular monitoring of especially the structures, that are going remain exposed, is recommended in this work.
Resumo:
The use of head-mounted displays (HMDs) can produce both positive and negative experiences. In an effort increase positive experiences and avoid negative ones, researchers have identified a number of variables that may cause sickness and eyestrain, although the exact nature of the relationship to HMDs may vary, depending on the tasks and the environments. Other non-sickness-related aspects of HMDs, such as users opinions and future decisions associated with task enjoyment and interest, have attracted little attention in the research community. In this thesis, user experiences associated with the use of monocular and bi-ocular HMDs were studied. These include eyestrain and sickness caused by current HMDs, the advantages and disadvantages of adjustable HMDs, HMDs as accessories for small multimedia devices, and the impact of individual characteristics and evaluated experiences on reported outcomes and opinions. The results indicate that today s commercial HMDs do not induce serious sickness or eyestrain. Reported adverse symptoms have some influence on HMD-related opinions, but the nature of the impact depends on the tasks and the devices used. As an accessory to handheld devices and as a personal viewing device, HMDs may increase use duration and enable users to perform tasks not suitable for small screens. Well-designed and functional, adjustable HMDs, especially monocular HMDs, increase viewing comfort and usability, which in turn may have a positive effect on product-related satisfaction. The role of individual characteristics in understanding HMD-related experiences has not changed significantly. Explaining other HMD-related experiences, especially forward-looking interests, also requires understanding more stable individual traits and motivations.
Resumo:
The earliest stages of human cortical visual processing can be conceived as extraction of local stimulus features. However, more complex visual functions, such as object recognition, require integration of multiple features. Recently, neural processes underlying feature integration in the visual system have been under intensive study. A specialized mid-level stage preceding the object recognition stage has been proposed to account for the processing of contours, surfaces and shapes as well as configuration. This thesis consists of four experimental, psychophysical studies on human visual feature integration. In two studies, classification image a recently developed psychophysical reverse correlation method was used. In this method visual noise is added to near-threshold stimuli. By investigating the relationship between random features in the noise and observer s perceptual decision in each trial, it is possible to estimate what features of the stimuli are critical for the task. The method allows visualizing the critical features that are used in a psychophysical task directly as a spatial correlation map, yielding an effective "behavioral receptive field". Visual context is known to modulate the perception of stimulus features. Some of these interactions are quite complex, and it is not known whether they reflect early or late stages of perceptual processing. The first study investigated the mechanisms of collinear facilitation, where nearby collinear Gabor flankers increase the detectability of a central Gabor. The behavioral receptive field of the mechanism mediating the detection of the central Gabor stimulus was measured by the classification image method. The results show that collinear flankers increase the extent of the behavioral receptive field for the central Gabor, in the direction of the flankers. The increased sensitivity at the ends of the receptive field suggests a low-level explanation for the facilitation. The second study investigated how visual features are integrated into percepts of surface brightness. A novel variant of the classification image method with brightness matching task was used. Many theories assume that perceived brightness is based on the analysis of luminance border features. Here, for the first time this assumption was directly tested. The classification images show that the perceived brightness of both an illusory Craik-O Brien-Cornsweet stimulus and a real uniform step stimulus depends solely on the border. Moreover, the spatial tuning of the features remains almost constant when the stimulus size is changed, suggesting that brightness perception is based on the output of a single spatial frequency channel. The third and fourth studies investigated global form integration in random-dot Glass patterns. In these patterns, a global form can be immediately perceived, if even a small proportion of random dots are paired to dipoles according to a geometrical rule. In the third study the discrimination of orientation structure in highly coherent concentric and Cartesian (straight) Glass patterns was measured. The results showed that the global form was more efficiently discriminated in concentric patterns. The fourth study investigated how form detectability depends on the global regularity of the Glass pattern. The local structure was either Cartesian or curved. It was shown that randomizing the local orientation deteriorated the performance only with the curved pattern. The results give support for the idea that curved and Cartesian patterns are processed in at least partially separate neural systems.
Resumo:
The aim of this research is to study the boundary zone of home and work and the tensions people experience while reconciling home and work? How are the requirements of the family, the home and the work taken care of in everyday life? What kind of difficulties does the individual experience when reconciling home activities and job requirements together? What kind of activity policies have families created to ease the everyday life? What kind of goals and requirements do families feel behind the difficulties in adjusting home and work? What kind of changes would make the adjusting of home and work easier? The changing family life, everyday home activities and the changing Finnish working life are studied to describe the adjusting of home and work. In addition the boundary zone of home and work and its tensions are studied. 337 research persons who find reconciling home and work challenging were elected from different sectors of the working life. Research persons were gathered from the public, private and third sectors. The research material was gathered with a semi-structured qualitative questionnaire published in internet. Contents analysis was the analysis method of the research material. The tensions of adjusting home and work are various. Several activity systems meet on the boundary zone of home and work causing boundary zones to expand and tensions to increase and expand like a network. In the everyday life of an individual the boundary zone fades out and home and work overlap. Tensions can be examined as internal conflicts of the individual through the activity system of everyday life. Individuals balance between individualism and familism, feeling bad, suffering from lack of time and struggling with childcare organizing problems and inflexible employers. The solutions to reconciling home and work difficulties are situational. Often is the help of family and friends required without any solid solutions. The conflict of the goals, requirements and the reality is behind the problems as well as the tightening terms of the working life and its growing expectations. Change requests are proposed on the levels of individual, home, work and the society. Reconciling home and work is not only a challenge between the employee and the employer. It s a problem that needs multilateral solutions and changes on the levels of individual, home, work and society. The challenge remaining is to find out if it would be successful to take the everyday life as starting point to negotiate the reconciling of home and work and how the possible family, social and work political solutions appear in everyday life.
Resumo:
In this paper a modified Heffron-Phillip's (K-constant) model is derived for the design of power system stabilizers. A knowledge of external system parameters, such as equivalent infinite bus voltage and external impedances or their equivalent estimated values is required for designing a conventional power system stabilizer. In the proposed method, information available at the secondary bus of the step-up transformer is used to set up a modified Heffron-Phillip's (ModHP) model. The PSS design based on this model utilizes signals available within the generating station. The efficacy of the proposed design technique and the performance of the stabilizer has been evaluated over a range of operating and system conditions. The simulation results have shown that the performance of the proposed stabilizer is comparable to that could be obtained by conventional design but without the need for the estimation and computation of external system parameters. The proposed design is thus well suited for practical applications to power system stabilization, including possibly the multi-machine applications where accurate system information is not readily available.