Utilização de um algoritmo de caminho mínimo no processo de recolhimento do palhiço da cana-de-açúcar

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Saramago, Braff e seus personagens duplos: uma análise comparativa

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de questionários de atividades de vida diária em pacientes com doença pulmonar obstrutiva crônica

Pós-graduação em Fisiopatologia em Clínica Médica - FMB

Updated Economic Overview of Latin America and the Caribbean 2013

Includes bibliography.

The employment situation in Latin America and the Caribbean: Recovery of employment: towards a sustainable model

The adverse effects on Latin America and the Caribbean of the global economic and financial crisis, the worst since the 1930s, have been considerably less than was once feared. Although a run of growth was cut short in 2009 and regional output shrank by 1.9%, the impact of the crisis was limited by the application of countercyclical fiscal and monetary policies by many of the region’s governments. The recovery in the economies, particularly in South America, has gone hand-in-hand with the rapid resurgence of the emerging economies of Asia, with all the favourable consequences this has had for global trade. A similar pattern may be observed regarding the impact of the crisis on labour markets in Latin America and the Caribbean. Although millions of people lost their jobs or had to trade down to lower-quality work, levels of employment (including formal employment) fell by less than originally foreseen. At the same time, real wages rose slightly in a context of falling inflation. The labour market thus stabilized domestic demand, and this contributed to the recovery that began in many countries in late 2009. Improved international trade and financing conditions, and the pick-up in domestic demand driven by macroeconomic policies, have led different commentators to estimate growth in the region’s economy at some 6% in 2010. As detailed in the first part of this edition of the Bulletin, the upturn has been manifested at the regional level by the creation of formal employment, a rise in the employment rate, a decline in joblessness and a moderate increase in real wages. Specifically, it is estimatedthat the regional unemployment rate will have dropped by 0.6 percentage points, from 8.1% in 2009 to 7.5% in 2010. The performance of different countries and subregions has been very uneven, however. On the one hand, there is Brazil, where high economic growth has been accompanied by vigorous creation of formal jobs and the unemployment rate has dropped to levels not seen in a long time. Other countries in South America have benefited from strong demand for natural resources from the Asian countries. Combined with higher domestic demand, this has raised their economic growth rates and had a positive impact on employment indicators. On the other hand, the recovery is still very weak in certain countries and subregions, particularly in the Caribbean, with employment indicators continuing to worsen.Thus, the recovery in the region’s economy in 2010 may be characterized as dynamic but uneven. Growth estimates for 2011 are less favourable. The risks associated with the imbalances in the world economy and the withdrawal of countercyclical fiscal packages are likely to cause the region to grow more slowly in 2011. Accordingly, a small further reduction of between 0.2 and 0.4 percentage points in the unemployment rate is projected for 2011. However, these indicators of recovery do not guarantee growth with decent work in the long term. To bolster the improvement in labour market indicators and generate more productive employment and decent work, the region’s countries need to strengthen their macroeconomic policies, improve regional and global policy coordination, identify and remove bottlenecks in the labour market itself and enhance instruments designed to promote greater equality. Like the rest of the world, the Latin American and Caribbean region is also confronted with the challenge of transforming the way it produces so that its economies can develop along tracks that are sustainable in the long term. Climate change and the consequent challenge of developing and strengthening low-carbon production and consumption patterns will also affect the way people work. A great challenge ahead is to create green jobs that combine decent work with environmentally sustainable production patterns. From this perspective, the second part of this Bulletin discusses the green jobs approach, offering some information on the challenges and opportunities involved in moving towards a sustainable economy in the region and presenting a set of options for addressing environmental issues and the repercussions of climate change in the world of work. Although the debate about the green jobs concept is fairly new in the region, examples already exist and a number of countries have moved ahead with the application of policies and programmes in this area. Costa Rica has formulated a National Climate Change Strategy, for example, whose foremost achievements include professional training in natural-resource management. In Brazil, fuel production from biomass has increased and social housing with solar panelling is being built. A number of other countries in the region are making progress in areas such as ecotourism, sustainable agriculture and infrastructure for climate change adaptation, and in formalizing the work of people who recycle household waste. The shift towards a more environmentally sustainable economy may cause jobs to be destroyed in some economic sectors and created in others. The working world will inevitably undergo major changes. If the issue is approached by way of social dialogue and appropriate public policies, there is a chance to use this shift to create more decent jobs, thereby contributing to growth in the economy, the construction of higher levels of equality and protection for the environment.

Estimulação ovariana, recuperação e maturação de oócitos de veado-catingueiro (Mazama gouazoubira)

Pós-graduação em Medicina Veterinária - FCAV

Reformas educacionais em Mato Grosso [1870-1880]: os diferentes sujeitos e a constituição de diferentes sentidos ao processo de instruir/educar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Configuração do mesossistema entre professores e pais de alunos com deficiência

A relação entre a família e a escola tem sido vista como alicerce fundamental para o bom desempenho escolar, e desenvolvimento dos alunos. O presente estudo apresenta dados de uma pesquisa voltada para análise das relações estabelecidas entre as professoras e os pais de crianças com necessidades especiais que estão matriculadas em uma escola pública da rede municipal de Belém do Pará. Para tal, foram entrevistadas quatro responsáveis e quatro professoras dos respectivos alunos, sendo realizados, posteriormente, grupos focais diferentes para pais e professores. Os dados foram analisados qualitativamente, buscando-se investigar a relação em função de três variáveis específicas: o conteúdo, a qualidade e a freqüência dessa relação. Tais variáveis podem ser compreendidas quanto às atividades que os pais fazem junto com a escola, de que maneira realizam tais atividades e com que freqüências o fazem. A análise dos resultados mostrou que a participação familiar na realidade escolar ainda se encontra bastante distante do que poderia ser considerado o ideal, principalmente, quando se trata de inclusão escolar de crianças deficientes, apesar de estar contido no projeto político-pedagógico da escola que é papel da mesma, incentivar a participação da comunidade. Os dados também revelaram que os pais vão pouco à escola, limitandose somente a levar e buscar os alunos e que raramente conversam com as professoras sobre outros assuntos, ficando as trocas verbais predominantemente referentes a algum problema que o aluno tenha apresentado em sala de aula. Apesar dos resultados mostrarem uma realidade amplamente negativa, tanto as professoras quanto os responsáveis acreditam que deve haver participação contínua da família na escola, porém ambos não desenvolvem atividades que propiciem tal aproximação. Em apenas um dos casos, uma professora mostrou desenvolver atividades que trazem a família mais para perto do cotidiano escolar das crianças. Especificamente em relação aos pais de alunos com deficiências, a situação mostra-se bastante parecida aos pais de crianças ditas “normais”, porém além do distanciamento natural, ainda há barreiras atitudinais de preconceito e discriminação para com os alunos deficientes, o que reflete conseqüentemente na relação com estas famílias.

Efeito da densidade nutricional da dieta e suplementação com cromo nas concentrações séricas de glicose, insulina e ácidos graxos não esterificados em vacas de leite lactantes

Pós-graduação em Zootecnia - FMVZ

Reabilitação estético-funcional sobre implantes agulhados e endósseos

This report shows the resolution of a case study whose aim was promote the aesthetic and functional rehabilitation of upper left hemi-arch over endosseous and needle implant prostheses. To improve the position of the needle implants, we performed the bucco-palatal bending of needles splinting them with composite resin; we removed the screwed implant prosthesis in the regions of the premolars (24 and 25) and molar (26). The mini-abutments of the last two implants were replaced, and in the first premolar and canine, we used cemented abutments due to implant angulation having planned soldering because of implant size and contact with one needle implant that could interfere with intimate contact bone/implant damaging biomechanics. Pick-up impressions were performed with an open tray, using a retractor cord in the needle implants and respective transfer copings. Therefore, models were related on semi-adjustable articulator after a face-bow recording and interocclusal indexes. After working cast fabrication and try-in of infra-structures, these were adjusted and related into the articulator again. Then, after ceramic build-up, adjustments, finishing, and torque, chemically-activated resin cement was applied on units 21 to 24. At the end of the case, we concluded that a good aesthetic and functional rehabilitation depends on thorough knowledge of techniques for each clinical situation.

Movimento dos olhos e controle postural

The control of stances such as the upright stance seems not to have a purpose in itself; this control could facilitate the execution of other simultaneous tasks, the so-called suprapostural tasks. The goal of this study was to determine the effects of saccadic eye movements on the control of posture. Twelve adult participants had their body oscillations analyzed while standing upright, for 70 s, in the postural conditions of feet apart and feet together, performing fixation in the central target or horizontal saccadic movements, in the conditions slow (0,5 Hz) and fast (1,1 Hz). The results showed that saccadic movements, independently of their frequency, strongly reduced trunk and head oscillations in the anterior-posterior (AP) axis. In this axis, there was an effect of feet position only in head oscillation. In the medio-lateral (ML) axis, the results showed a strong effect of feet position with body oscillation decreased in the condition of feet apart. The effect of the visual task in the ML axis occurred only for trunk oscillation, not reaching significance level in the pairewise comparisons. In the AP axis, the data corroborate a facilitatory explanation of the control of posture: the reduction in body oscillation limited the variations of the stimulus image projected on the retina, facilitating the execution of saccadic movements as compared to fixation. In the ML axis, the effect of reducing the basis of support was more evident than the effect of saccadic movements, suggesting that the available resources were used primarily for the postural task in detriment of the visual task. Additionally, aspects like attentional focus and sensory information pick up are discussed as mechanisms involved in this task

Compressed Air, Wooden Clappers, and Other Non-Traditional Methods for Dispersing European Starlings from an Urban Roost

During autumn 2003, several thousand European starlings (Sturnus vulgaris) began roosting on exposed I-beams in a newly constructed, decorative glass canopy that covered the passenger pick-up area at the terminal building for Cleveland Hopkins International Airport, Ohio. The use of lethal control or conventional dispersal techniques, such as pyrotechnics and fire hoses, were not feasible in the airport terminal area. The design and aesthetics of the structure precluded the use of netting and other exclusion materials. In January 2004, an attempt was made to disperse the birds using recorded predator and distress calls broadcast from speakers installed in the structure. This technique failed to disperse the birds. In February 2004, we developed a technique using compressed air to physically and audibly harass the birds. We used a trailer-mounted commercial air compressor producing 185 cubic feet per minute of air at 100 pounds per square inch pressure and a 20-foot long, 1-inch diameter PVC pipe attached to the outlet hose. One person slowly (< 5 mph) drove a pick-up truck through the airport terminal at dusk while the second person sat on a bench in the truck bed and directed the compressed air from the pipe into the canopy to harass starlings attempting to enter the roost site. After 5 consecutive nights of compressed-air harassment, virtually no starlings attempted to roost in the canopy. Once familiar with the physical effects of the compressed air, the birds dispersed at the sound of the air. Only occasional harassment at dusk was needed through the remainder of the winter to keep the canopy free of starlings. Similar harassment with the compressor was conducted successfully in autumn 2004 with the addition of a modified leaf blower, wooden clappers, and laser. In conclusion, we found compressed air to be a safe, unobtrusive, and effective method for dispersing starlings from an urban roost site. This technique would likely be applicable for other urban-roosting species such as crows, house sparrows, and blackbirds.

Parameters and algorithms to evaluate cardiac mechanics by conductance catheter

This work is structured as follows: In Section 1 we discuss the clinical problem of heart failure. In particular, we present the phenomenon known as ventricular mechanical dyssynchrony: its impact on cardiac function, the therapy for its treatment and the methods for its quantification. Specifically, we describe the conductance catheter and its use for the measurement of dyssynchrony. At the end of the Section 1, we propose a new set of indexes to quantify the dyssynchrony that are studied and validated thereafter. In Section 2 we describe the studies carried out in this work: we report the experimental protocols, we present and discuss the results obtained. Finally, we report the overall conclusions drawn from this work and we try to envisage future works and possible clinical applications of our results. Ancillary studies that were carried out during this work mainly to investigate several aspects of cardiac resynchronization therapy (CRT) are mentioned in Appendix. -------- Ventricular mechanical dyssynchrony plays a regulating role already in normal physiology but is especially important in pathological conditions, such as hypertrophy, ischemia, infarction, or heart failure (Chapter 1,2.). Several prospective randomized controlled trials supported the clinical efficacy and safety of cardiac resynchronization therapy (CRT) in patients with moderate or severe heart failure and ventricular dyssynchrony. CRT resynchronizes ventricular contraction by simultaneous pacing of both left and right ventricle (biventricular pacing) (Chapter 1.). Currently, the conductance catheter method has been used extensively to assess global systolic and diastolic ventricular function and, more recently, the ability of this instrument to pick-up multiple segmental volume signals has been used to quantify mechanical ventricular dyssynchrony. Specifically, novel indexes based on volume signals acquired with the conductance catheter were introduced to quantify dyssynchrony (Chapter 3,4.). Present work was aimed to describe the characteristics of the conductancevolume signals, to investigate the performance of the indexes of ventricular dyssynchrony described in literature and to introduce and validate improved dyssynchrony indexes. Morevoer, using the conductance catheter method and the new indexes, the clinical problem of the ventricular pacing site optimization was addressed and the measurement protocol to adopt for hemodynamic tests on cardiac pacing was investigated. In accordance to the aims of the work, in addition to the classical time-domain parameters, a new set of indexes has been extracted, based on coherent averaging procedure and on spectral and cross-spectral analysis (Chapter 4.). Our analyses were carried out on patients with indications for electrophysiologic study or device implantation (Chapter 5.). For the first time, besides patients with heart failure, indexes of mechanical dyssynchrony based on conductance catheter were extracted and studied in a population of patients with preserved ventricular function, providing information on the normal range of such a kind of values. By performing a frequency domain analysis and by applying an optimized coherent averaging procedure (Chapter 6.a.), we were able to describe some characteristics of the conductance-volume signals (Chapter 6.b.). We unmasked the presence of considerable beat-to-beat variations in dyssynchrony that seemed more frequent in patients with ventricular dysfunction and to play a role in discriminating patients. These non-recurrent mechanical ventricular non-uniformities are probably the expression of the substantial beat-to-beat hemodynamic variations, often associated with heart failure and due to cardiopulmonary interaction and conduction disturbances. We investigated how the coherent averaging procedure may affect or refine the conductance based indexes; in addition, we proposed and tested a new set of indexes which quantify the non-periodic components of the volume signals. Using the new set of indexes we studied the acute effects of the CRT and the right ventricular pacing, in patients with heart failure and patients with preserved ventricular function. In the overall population we observed a correlation between the hemodynamic changes induced by the pacing and the indexes of dyssynchrony, and this may have practical implications for hemodynamic-guided device implantation. The optimal ventricular pacing site for patients with conventional indications for pacing remains controversial. The majority of them do not meet current clinical indications for CRT pacing. Thus, we carried out an analysis to compare the impact of several ventricular pacing sites on global and regional ventricular function and dyssynchrony (Chapter 6.c.). We observed that right ventricular pacing worsens cardiac function in patients with and without ventricular dysfunction unless the pacing site is optimized. CRT preserves left ventricular function in patients with normal ejection fraction and improves function in patients with poor ejection fraction despite no clinical indication for CRT. Moreover, the analysis of the results obtained using new indexes of regional dyssynchrony, suggests that pacing site may influence overall global ventricular function depending on its relative effects on regional function and synchrony. Another clinical problem that has been investigated in this work is the optimal right ventricular lead location for CRT (Chapter 6.d.). Similarly to the previous analysis, using novel parameters describing local synchrony and efficiency, we tested the hypothesis and we demonstrated that biventricular pacing with alternative right ventricular pacing sites produces acute improvement of ventricular systolic function and improves mechanical synchrony when compared to standard right ventricular pacing. Although no specific right ventricular location was shown to be superior during CRT, the right ventricular pacing site that produced the optimal acute hemodynamic response varied between patients. Acute hemodynamic effects of cardiac pacing are conventionally evaluated after stabilization episodes. The applied duration of stabilization periods in most cardiac pacing studies varied considerably. With an ad hoc protocol (Chapter 6.e.) and indexes of mechanical dyssynchrony derived by conductance catheter we demonstrated that the usage of stabilization periods during evaluation of cardiac pacing may mask early changes in systolic and diastolic intra-ventricular dyssynchrony. In fact, at the onset of ventricular pacing, the main dyssynchrony and ventricular performance changes occur within a 10s time span, initiated by the changes in ventricular mechanical dyssynchrony induced by aberrant conduction and followed by a partial or even complete recovery. It was already demonstrated in normal animals that ventricular mechanical dyssynchrony may act as a physiologic modulator of cardiac performance together with heart rate, contractile state, preload and afterload. The present observation, which shows the compensatory mechanism of mechanical dyssynchrony, suggests that ventricular dyssynchrony may be regarded as an intrinsic cardiac property, with baseline dyssynchrony at increased level in heart failure patients. To make available an independent system for cardiac output estimation, in order to confirm the results obtained with conductance volume method, we developed and validated a novel technique to apply the Modelflow method (a method that derives an aortic flow waveform from arterial pressure by simulation of a non-linear three-element aortic input impedance model, Wesseling et al. 1993) to the left ventricular pressure signal, instead of the arterial pressure used in the classical approach (Chapter 7.). The results confirmed that in patients without valve abnormalities, undergoing conductance catheter evaluations, the continuous monitoring of cardiac output using the intra-ventricular pressure signal is reliable. Thus, cardiac output can be monitored quantitatively and continuously with a simple and low-cost method. During this work, additional studies were carried out to investigate several areas of uncertainty of CRT. The results of these studies are briefly presented in Appendix: the long-term survival in patients treated with CRT in clinical practice, the effects of CRT in patients with mild symptoms of heart failure and in very old patients, the limited thoracotomy as a second choice alternative to transvenous implant for CRT delivery, the evolution and prognostic significance of diastolic filling pattern in CRT, the selection of candidates to CRT with echocardiographic criteria and the prediction of response to the therapy.

Sviluppo di metodologie per la Stima in Tempo Reale delle Grandezze Indicate in Motori a Combustione Interna

Modern Internal Combustion Engines are becoming increasingly complex in terms of their control systems and strategies. The growth of the algorithms’ complexity results in a rise of the number of on-board quantities for control purposes. In order to improve combustion efficiency and, simultaneously, limit the amount of pollutant emissions, the on-board evaluation of two quantities in particular has become essential; namely indicated torque produced by the engine and the angular position where 50% of fuel mass injected over an engine cycle is burned (MFB50). The above mentioned quantities can be evaluated through the measurement of in-cylinder pressure. Nonetheless, at the time being, the installation of in-cylinder pressure sensors on vehicles is extremely uncommon mainly because of measurement reliability and costs. This work illustrates a methodological approach for the estimation of indicated torque and MFB50 that is based on the engine speed fluctuation measurement. This methodology is compatible with the typical on-board application restraints. Moreover, it requires no additional costs since speed can be measured using the system already mounted on the vehicle, which is made of a magnetic pick-up faced to a toothed wheel. The estimation algorithm consists of two main parts: first, the evaluation of indicated torque fluctuation based on speed measurement and secondly, the evaluation of the mean value of the indicated torque (over an engine cycle) and MFB50 by using the relationship with the indicated torque harmonic and other engine quantities. The procedure has been successfully applied to an L4 turbocharged Diesel engine mounted on-board a vehicle.

Adiponectin as a marker of success in intracytoplasmic sperm injection/embryo transfer cycles

Adiponectin (Acrp30) is an adipose tissue-derived protein whose serum concentrations, in contrast to leptin, are reported to be negatively correlated to body mass. In spite of the comparatively high circulating adiponectin concentrations, this protein has not been studied in the context of assisted reproduction to date. The aim of this preliminary project was thus to examine the potential of adiponectin to serve as a marker for fertility. We compared adiponectin levels in serum before and after controlled ovarian hyperstimulation, as well as in follicular fluid (FF), between two groups: those with successful outcome (clinical pregnancies) and those with implantation failure. In the former, adiponectin concentrations were higher than in the negative outcome group; this difference was statistically significant (p < 0.05) in serum on the day of oocyte pick-up (OPU) as well as two or three days before OPU, but not in FF or in serum at the beginning of the stimulation phase. This finding adds a new perspective to the suggested but still controversial reduction in FF leptin concentrations in the positive outcome group, and may become a useful tool for early prediction of success of in vitro fertilization treatment for a given patient.